| Message ID | 20170402132538.GA15400@moc6.cz |
|---|---|
| State | Changes Requested |
| Delegated to: | John Crispin |
| Headers | show |
Hi On 02/04/17 15:25, Filip Moc wrote: > You can flash via tftp recovery (serve factory image as /mr6400_tp_recovery.bin > on 192.168.0.66/24, connect to any ethernet port and power on device while > holding the reset button). Flashing via OEM web interface does not work. > > Hardware Specification (v1.0 EU): > - SoC: QCA9531 > - Flash: Winbond W25Q64FV (8MiB) > - RAM: EtronTech EM6AB160TSE-5G (64MiB) > - Wireless: SoC platform only (2.4GHz b/g/n, 2x internal antenna) > - Ethernet: 2NIC (3x100M + 1x100M) > - WWAN: TP-LINK LTE MODULE (2x external detachable antenna) > - Power: DC 12V 1A > > Signed-off-by: Filip Moc <lede@moc6.cz> > --- I am afraind this no longer applies, sorry for the delay and while rebasing could you please also add <snip> > diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 > index 206ace6..6c70091 100644 > --- a/target/linux/ar71xx/config-4.4 > +++ b/target/linux/ar71xx/config-4.4 > @@ -169,6 +169,7 @@ CONFIG_ATH79_MACH_TL_MR11U=y > CONFIG_ATH79_MACH_TL_MR13U=y > CONFIG_ATH79_MACH_TL_MR3020=y > CONFIG_ATH79_MACH_TL_MR3X20=y > +CONFIG_ATH79_MACH_TL_MR6400=y > CONFIG_ATH79_MACH_TL_WA701ND_V2=y > CONFIG_ATH79_MACH_TL_WA7210N_V2=y > CONFIG_ATH79_MACH_TL_WA801ND_V3=y the symbol as undefined to the nand and mikrotik config files, otherwise the builders will spew errors John > diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt > index 514d05d..aaec03c 100644 > --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt > +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt > @@ -1358,6 +1358,16 @@ config ATH79_MACH_TL_MR3X20 > select ATH79_DEV_M25P80 > select ATH79_DEV_USB > > +config ATH79_MACH_TL_MR6400 > + bool "TP-LINK TL-MR6400 support" > + select SOC_QCA953X > + select ATH79_DEV_ETH > + select ATH79_DEV_GPIO_BUTTONS > + select ATH79_DEV_LEDS_GPIO > + select ATH79_DEV_M25P80 > + select ATH79_DEV_USB > + select ATH79_DEV_WMAC > + > config ATH79_MACH_TL_WAX50RE > bool "TP-LINK TL-WA750/850RE support" > select SOC_AR934X > diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile > index 6475259..ef2dc40 100644 > --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile > +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile > @@ -174,6 +174,7 @@ obj-$(CONFIG_ATH79_MACH_TL_MR11U) += mach-tl-mr11u.o > obj-$(CONFIG_ATH79_MACH_TL_MR13U) += mach-tl-mr13u.o > obj-$(CONFIG_ATH79_MACH_TL_MR3020) += mach-tl-mr3020.o > obj-$(CONFIG_ATH79_MACH_TL_MR3X20) += mach-tl-mr3x20.o > +obj-$(CONFIG_ATH79_MACH_TL_MR6400) += mach-tl-mr6400.o > obj-$(CONFIG_ATH79_MACH_TL_WA701ND_V2) += mach-tl-wa701nd-v2.o > obj-$(CONFIG_ATH79_MACH_TL_WA7210N_V2) += mach-tl-wa7210n-v2.o > obj-$(CONFIG_ATH79_MACH_TL_WA801ND_V3) += mach-tl-wa801nd-v3.o > diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr6400.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr6400.c > new file mode 100644 > index 0000000..be49c89 > --- /dev/null > +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr6400.c > @@ -0,0 +1,151 @@ > +/* > + * TP-LINK TL-MR6400 board support > + * > + * Copyright (C) 2017 Filip Moc <lede@moc6.cz> > + * > + * Redistribution and use in source and binary forms, with or without > + * modification, are permitted provided that the following conditions are met: > + * * The name of the author may not be used to endorse or promote products > + * derived from this software without specific prior written permission. > + * > + * THIS SOFTWARE IS PROVIDED BY AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED > + * WARRANTIES, ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY > + * DAMAGES ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE. > + */ > + > +#include <linux/gpio.h> > +#include <linux/platform_device.h> > + > +#include <asm/mach-ath79/ar71xx_regs.h> > + > +#include "common.h" > +#include "dev-gpio-buttons.h" > +#include "dev-eth.h" > +#include "dev-leds-gpio.h" > +#include "dev-m25p80.h" > +#include "dev-usb.h" > +#include "dev-wmac.h" > +#include "machtypes.h" > + > +#define TL_MR6400_GPIO_LTE_POWER 4 > +#define TL_MR6400_GPIO_BTN_RESET 12 /* SW2 */ > +#define TL_MR6400_GPIO_BTN_RFKILL 14 /* SW3 */ > +#define TL_MR6400_GPIO_LED_WAN 0 /* D12 */ > +#define TL_MR6400_GPIO_LED_4G 1 /* D11 */ > +#define TL_MR6400_GPIO_LED_WPS 3 /* D5 */ > +#define TL_MR6400_GPIO_LED_WLAN 11 /* D3 */ > +#define TL_MR6400_GPIO_LED_POWER 13 /* D2 */ > +#define TL_MR6400_GPIO_LED_LAN 16 /* D4 */ > + > +#define TL_MR6400_KEYS_POLL_INTERVAL 20 /* msecs */ > +#define TL_MR6400_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR6400_KEYS_POLL_INTERVAL) > + > +#define TL_MR6400_WMAC_CALDATA_OFFSET 0x1000 > + > +static const char *tl_mr6400_part_probes[] = { > + "tp-link", > + NULL, > +}; > + > +static struct flash_platform_data tl_mr6400_flash_data = { > + .part_probes = tl_mr6400_part_probes, > + .type = "w25q64", > +}; > + > +static struct gpio_led tl_mr6400_leds_gpio[] __initdata = { > + { > + .name = "tp-link:white:wan", > + .gpio = TL_MR6400_GPIO_LED_WAN, > + .active_low = 0, > + }, > + { > + .name = "tp-link:white:4g", > + .gpio = TL_MR6400_GPIO_LED_4G, > + .active_low = 0, > + }, > + { > + .name = "tp-link:white:wps", > + .gpio = TL_MR6400_GPIO_LED_WPS, > + .active_low = 0, > + }, > + { > + .name = "tp-link:white:wlan", > + .gpio = TL_MR6400_GPIO_LED_WLAN, > + .active_low = 0, > + }, > + { > + .name = "tp-link:white:power", > + .gpio = TL_MR6400_GPIO_LED_POWER, > + .active_low = 0, > + }, > + { > + .name = "tp-link:white:lan", > + .gpio = TL_MR6400_GPIO_LED_LAN, > + .active_low = 0, > + }, > +}; > + > +static struct gpio_keys_button tl_mr6400_gpio_keys[] __initdata = { > + { > + .desc = "reset", > + .type = EV_KEY, > + .code = KEY_RESTART, > + .debounce_interval = TL_MR6400_KEYS_DEBOUNCE_INTERVAL, > + .gpio = TL_MR6400_GPIO_BTN_RESET, > + .active_low = 1, > + }, > + { > + .desc = "rfkill", > + .type = EV_KEY, > + .code = KEY_RFKILL, > + .debounce_interval = TL_MR6400_KEYS_DEBOUNCE_INTERVAL, > + .gpio = TL_MR6400_GPIO_BTN_RFKILL, > + .active_low = 1, > + }, > +}; > + > +static void __init tl_mr6400_setup(void) > +{ > + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); > + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); > + > + ath79_register_m25p80(&tl_mr6400_flash_data); > + > + ath79_register_mdio(0, 0x0); > + > + /* LAN1, LAN2, LAN3 */ > + ath79_switch_data.phy4_mii_en = 1; > + ath79_switch_data.phy_poll_mask |= BIT(0); > + ath79_eth1_data.duplex = DUPLEX_FULL; > + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; > + ath79_eth1_data.speed = SPEED_1000; > + ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); > + ath79_register_eth(1); > + > + /* LAN4 / WAN */ > + ath79_eth0_data.phy_mask = BIT(0); > + ath79_eth0_data.duplex = DUPLEX_FULL; > + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; > + ath79_eth0_data.speed = SPEED_100; > + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); > + ath79_register_eth(0); > + > + ath79_register_wmac(art + TL_MR6400_WMAC_CALDATA_OFFSET, mac); > + > + ath79_register_leds_gpio(-1, > + ARRAY_SIZE(tl_mr6400_leds_gpio), > + tl_mr6400_leds_gpio); > + > + ath79_register_gpio_keys_polled(-1, > + TL_MR6400_KEYS_POLL_INTERVAL, > + ARRAY_SIZE(tl_mr6400_gpio_keys), > + tl_mr6400_gpio_keys); > + > + gpio_request_one(TL_MR6400_GPIO_LTE_POWER, > + GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED | GPIOF_ACTIVE_LOW, > + "LTE power"); > + ath79_register_usb(); > +} > + > +MIPS_MACHINE(ATH79_MACH_TL_MR6400, "TL-MR6400", "TP-LINK TL-MR6400", > + tl_mr6400_setup); > diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h > index 4cad628..e89ece1 100644 > --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h > +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h > @@ -206,6 +206,7 @@ enum ath79_mach_type { > ATH79_MACH_TL_MR3220_V2, /* TP-LINK TL-MR3220 v2 */ > ATH79_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */ > ATH79_MACH_TL_MR3420_V2, /* TP-LINK TL-MR3420 v2 */ > + ATH79_MACH_TL_MR6400, /* TP-LINK TL-MR6400 */ > ATH79_MACH_TL_WA701ND_V2, /* TP-LINK TL-WA701ND v2 */ > ATH79_MACH_TL_WA7210N_V2, /* TP-LINK TL-WA7210N v2 */ > ATH79_MACH_TL_WA750RE, /* TP-LINK TL-WA750RE */ > diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk > index b251135..2a0b06a 100644 > --- a/target/linux/ar71xx/image/tp-link.mk > +++ b/target/linux/ar71xx/image/tp-link.mk > @@ -452,6 +452,17 @@ define Device/tl-mr3420-v2 > endef > TARGET_DEVICES += tl-mr3020-v1 tl-mr3040-v1 tl-mr3040-v2 tl-mr3220-v1 tl-mr3220-v2 tl-mr3420-v1 tl-mr3420-v2 > > +define Device/tl-mr6400-v1 > + $(Device/tplink-8mlzma) > + DEVICE_TITLE := TP-LINK TL-MR6400 v1 > + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-net kmod-usb-net-rndis kmod-usb-serial kmod-usb-serial-option adb > + BOARDNAME := TL-MR6400 > + DEVICE_PROFILE := TLMR6400 > + TPLINK_HWID := 0x64000001 > +endef > +TARGET_DEVICES += tl-mr6400-v1 > + > + > define Device/tl-wpa8630 > $(Device/tplink-8mlzma) > DEVICE_TITLE := TP-LINK TL-WPA8630
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 4dc4bfd..4d6c5c9 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -576,6 +576,12 @@ tl-wr941nd-v5) ;; esac ;; +tl-mr6400) + ucidef_set_led_netdev "lan" "LAN" "tp-link:white:lan" "eth0" + ucidef_set_led_netdev "wan" "WAN" "tp-link:white:wan" "eth1" + ucidef_set_led_netdev "4g" "4G" "tp-link:white:4g" "usb0" + ucidef_set_led_wlan "wlan" "WLAN" "tp-link:white:wlan" "phy0tpt" + ;; tl-wa7210n-v2) ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0" ucidef_set_rssimon "wlan0" "200000" "1" diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index e08d7dd..ea2e7dc 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -307,6 +307,11 @@ ar71xx_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth1" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4" ;; + tl-mr6400) + ucidef_set_interfaces_lan_wan "eth0.1 eth1" "usb0" + ucidef_add_switch "switch0" \ + "0@eth0" "1:lan" "2:lan" "3:lan" + ;; dir-825-b1|\ nbg460n_550n_550nh|\ tew-673gru|\ diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 1064641..0916fa0 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -354,6 +354,9 @@ get_status_led() { tl-wa860re) status_led="tp-link:green:power" ;; + tl-mr6400) + status_led="tp-link:white:power" + ;; tl-mr3220|\ tl-mr3220-v2|\ tl-mr3420|\ diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index ae0189d..4ce6918 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -298,6 +298,9 @@ tplink_board_detect() { "342000"*) model="TP-Link TL-MR3420" ;; + "640000"*) + model="TP-Link TL-MR6400" + ;; "332000"*) model="TP-Link TL-WDR3320" ;; @@ -1002,6 +1005,9 @@ ar71xx_board_detect() { *"TL-MR3420 v2") name="tl-mr3420-v2" ;; + *TL-MR6400) + name="tl-mr6400" + ;; *"TL-WA701ND v2") name="tl-wa701nd-v2" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 576ff6c..6134604 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -394,6 +394,7 @@ platform_check_image() { tl-mr3220|\ tl-mr3420-v2|\ tl-mr3420|\ + tl-mr6400|\ tl-wa701nd-v2|\ tl-wa7210n-v2|\ tl-wa750re|\ diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index 206ace6..6c70091 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -169,6 +169,7 @@ CONFIG_ATH79_MACH_TL_MR11U=y CONFIG_ATH79_MACH_TL_MR13U=y CONFIG_ATH79_MACH_TL_MR3020=y CONFIG_ATH79_MACH_TL_MR3X20=y +CONFIG_ATH79_MACH_TL_MR6400=y CONFIG_ATH79_MACH_TL_WA701ND_V2=y CONFIG_ATH79_MACH_TL_WA7210N_V2=y CONFIG_ATH79_MACH_TL_WA801ND_V3=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 514d05d..aaec03c 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -1358,6 +1358,16 @@ config ATH79_MACH_TL_MR3X20 select ATH79_DEV_M25P80 select ATH79_DEV_USB +config ATH79_MACH_TL_MR6400 + bool "TP-LINK TL-MR6400 support" + select SOC_QCA953X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + config ATH79_MACH_TL_WAX50RE bool "TP-LINK TL-WA750/850RE support" select SOC_AR934X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 6475259..ef2dc40 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -174,6 +174,7 @@ obj-$(CONFIG_ATH79_MACH_TL_MR11U) += mach-tl-mr11u.o obj-$(CONFIG_ATH79_MACH_TL_MR13U) += mach-tl-mr13u.o obj-$(CONFIG_ATH79_MACH_TL_MR3020) += mach-tl-mr3020.o obj-$(CONFIG_ATH79_MACH_TL_MR3X20) += mach-tl-mr3x20.o +obj-$(CONFIG_ATH79_MACH_TL_MR6400) += mach-tl-mr6400.o obj-$(CONFIG_ATH79_MACH_TL_WA701ND_V2) += mach-tl-wa701nd-v2.o obj-$(CONFIG_ATH79_MACH_TL_WA7210N_V2) += mach-tl-wa7210n-v2.o obj-$(CONFIG_ATH79_MACH_TL_WA801ND_V3) += mach-tl-wa801nd-v3.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr6400.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr6400.c new file mode 100644 index 0000000..be49c89 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr6400.c @@ -0,0 +1,151 @@ +/* + * TP-LINK TL-MR6400 board support + * + * Copyright (C) 2017 Filip Moc <lede@moc6.cz> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * DAMAGES ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE. + */ + +#include <linux/gpio.h> +#include <linux/platform_device.h> + +#include <asm/mach-ath79/ar71xx_regs.h> + +#include "common.h" +#include "dev-gpio-buttons.h" +#include "dev-eth.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define TL_MR6400_GPIO_LTE_POWER 4 +#define TL_MR6400_GPIO_BTN_RESET 12 /* SW2 */ +#define TL_MR6400_GPIO_BTN_RFKILL 14 /* SW3 */ +#define TL_MR6400_GPIO_LED_WAN 0 /* D12 */ +#define TL_MR6400_GPIO_LED_4G 1 /* D11 */ +#define TL_MR6400_GPIO_LED_WPS 3 /* D5 */ +#define TL_MR6400_GPIO_LED_WLAN 11 /* D3 */ +#define TL_MR6400_GPIO_LED_POWER 13 /* D2 */ +#define TL_MR6400_GPIO_LED_LAN 16 /* D4 */ + +#define TL_MR6400_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_MR6400_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR6400_KEYS_POLL_INTERVAL) + +#define TL_MR6400_WMAC_CALDATA_OFFSET 0x1000 + +static const char *tl_mr6400_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data tl_mr6400_flash_data = { + .part_probes = tl_mr6400_part_probes, + .type = "w25q64", +}; + +static struct gpio_led tl_mr6400_leds_gpio[] __initdata = { + { + .name = "tp-link:white:wan", + .gpio = TL_MR6400_GPIO_LED_WAN, + .active_low = 0, + }, + { + .name = "tp-link:white:4g", + .gpio = TL_MR6400_GPIO_LED_4G, + .active_low = 0, + }, + { + .name = "tp-link:white:wps", + .gpio = TL_MR6400_GPIO_LED_WPS, + .active_low = 0, + }, + { + .name = "tp-link:white:wlan", + .gpio = TL_MR6400_GPIO_LED_WLAN, + .active_low = 0, + }, + { + .name = "tp-link:white:power", + .gpio = TL_MR6400_GPIO_LED_POWER, + .active_low = 0, + }, + { + .name = "tp-link:white:lan", + .gpio = TL_MR6400_GPIO_LED_LAN, + .active_low = 0, + }, +}; + +static struct gpio_keys_button tl_mr6400_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TL_MR6400_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_MR6400_GPIO_BTN_RESET, + .active_low = 1, + }, + { + .desc = "rfkill", + .type = EV_KEY, + .code = KEY_RFKILL, + .debounce_interval = TL_MR6400_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_MR6400_GPIO_BTN_RFKILL, + .active_low = 1, + }, +}; + +static void __init tl_mr6400_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_m25p80(&tl_mr6400_flash_data); + + ath79_register_mdio(0, 0x0); + + /* LAN1, LAN2, LAN3 */ + ath79_switch_data.phy4_mii_en = 1; + ath79_switch_data.phy_poll_mask |= BIT(0); + ath79_eth1_data.duplex = DUPLEX_FULL; + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_eth1_data.speed = SPEED_1000; + ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); + ath79_register_eth(1); + + /* LAN4 / WAN */ + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.speed = SPEED_100; + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); + ath79_register_eth(0); + + ath79_register_wmac(art + TL_MR6400_WMAC_CALDATA_OFFSET, mac); + + ath79_register_leds_gpio(-1, + ARRAY_SIZE(tl_mr6400_leds_gpio), + tl_mr6400_leds_gpio); + + ath79_register_gpio_keys_polled(-1, + TL_MR6400_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_mr6400_gpio_keys), + tl_mr6400_gpio_keys); + + gpio_request_one(TL_MR6400_GPIO_LTE_POWER, + GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED | GPIOF_ACTIVE_LOW, + "LTE power"); + ath79_register_usb(); +} + +MIPS_MACHINE(ATH79_MACH_TL_MR6400, "TL-MR6400", "TP-LINK TL-MR6400", + tl_mr6400_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 4cad628..e89ece1 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -206,6 +206,7 @@ enum ath79_mach_type { ATH79_MACH_TL_MR3220_V2, /* TP-LINK TL-MR3220 v2 */ ATH79_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */ ATH79_MACH_TL_MR3420_V2, /* TP-LINK TL-MR3420 v2 */ + ATH79_MACH_TL_MR6400, /* TP-LINK TL-MR6400 */ ATH79_MACH_TL_WA701ND_V2, /* TP-LINK TL-WA701ND v2 */ ATH79_MACH_TL_WA7210N_V2, /* TP-LINK TL-WA7210N v2 */ ATH79_MACH_TL_WA750RE, /* TP-LINK TL-WA750RE */ diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk index b251135..2a0b06a 100644 --- a/target/linux/ar71xx/image/tp-link.mk +++ b/target/linux/ar71xx/image/tp-link.mk @@ -452,6 +452,17 @@ define Device/tl-mr3420-v2 endef TARGET_DEVICES += tl-mr3020-v1 tl-mr3040-v1 tl-mr3040-v2 tl-mr3220-v1 tl-mr3220-v2 tl-mr3420-v1 tl-mr3420-v2 +define Device/tl-mr6400-v1 + $(Device/tplink-8mlzma) + DEVICE_TITLE := TP-LINK TL-MR6400 v1 + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-net kmod-usb-net-rndis kmod-usb-serial kmod-usb-serial-option adb + BOARDNAME := TL-MR6400 + DEVICE_PROFILE := TLMR6400 + TPLINK_HWID := 0x64000001 +endef +TARGET_DEVICES += tl-mr6400-v1 + + define Device/tl-wpa8630 $(Device/tplink-8mlzma) DEVICE_TITLE := TP-LINK TL-WPA8630
You can flash via tftp recovery (serve factory image as /mr6400_tp_recovery.bin on 192.168.0.66/24, connect to any ethernet port and power on device while holding the reset button). Flashing via OEM web interface does not work. Hardware Specification (v1.0 EU): - SoC: QCA9531 - Flash: Winbond W25Q64FV (8MiB) - RAM: EtronTech EM6AB160TSE-5G (64MiB) - Wireless: SoC platform only (2.4GHz b/g/n, 2x internal antenna) - Ethernet: 2NIC (3x100M + 1x100M) - WWAN: TP-LINK LTE MODULE (2x external detachable antenna) - Power: DC 12V 1A Signed-off-by: Filip Moc <lede@moc6.cz> --- Notes: v1->v2: - Fixed DEVICE_TITLE - Defined flash type as "w25q64" (but it's still being misdetected as "s25fl064k") v2->v3: - Removed enablemodem - Changed license of mach-tl-mr6400.c v3->v4: - Updated commit message v4->v5: - Fixed default network configuration (eth0 -> eth0.1) target/linux/ar71xx/base-files/etc/board.d/01_leds | 6 + .../linux/ar71xx/base-files/etc/board.d/02_network | 5 + target/linux/ar71xx/base-files/etc/diag.sh | 3 + target/linux/ar71xx/base-files/lib/ar71xx.sh | 6 + .../ar71xx/base-files/lib/upgrade/platform.sh | 1 + target/linux/ar71xx/config-4.4 | 1 + .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 10 ++ target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 + .../ar71xx/files/arch/mips/ath79/mach-tl-mr6400.c | 151 +++++++++++++++++++++ .../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 + target/linux/ar71xx/image/tp-link.mk | 11 ++ 11 files changed, 196 insertions(+) create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr6400.c