diff mbox

[V2,3/4] gpio: Add ROHM BD9571MWV-M PMIC GPIO driver

Message ID 20170424152130.32410-3-marek.vasut+renesas@gmail.com
State New
Headers show

Commit Message

Marek Vasut April 24, 2017, 3:21 p.m. UTC
Add driver for the GPIO block in the ROHM BD9571MWV-W MFD PMIC.
This block is pretty trivial and supports setting GPIO direction
as Input/Output and in case of Output, supports setting value.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: linux-gpio@vger.kernel.org
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
V2: Use linux/gpio/driver.h instead of linux/gpio.h
---
 drivers/gpio/Kconfig          |  11 ++++
 drivers/gpio/Makefile         |   1 +
 drivers/gpio/gpio-bd9571mwv.c | 144 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 156 insertions(+)
 create mode 100644 drivers/gpio/gpio-bd9571mwv.c

Comments

Linus Walleij April 25, 2017, 9:32 a.m. UTC | #1
On Mon, Apr 24, 2017 at 5:21 PM, Marek Vasut <marek.vasut@gmail.com> wrote:

> Add driver for the GPIO block in the ROHM BD9571MWV-W MFD PMIC.
> This block is pretty trivial and supports setting GPIO direction
> as Input/Output and in case of Output, supports setting value.
>
> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
> Cc: linux-gpio@vger.kernel.org
> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> V2: Use linux/gpio/driver.h instead of linux/gpio.h

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Are you merging this through MFD?

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Marek Vasut April 25, 2017, 9:35 a.m. UTC | #2
On 04/25/2017 11:32 AM, Linus Walleij wrote:
> On Mon, Apr 24, 2017 at 5:21 PM, Marek Vasut <marek.vasut@gmail.com> wrote:
> 
>> Add driver for the GPIO block in the ROHM BD9571MWV-W MFD PMIC.
>> This block is pretty trivial and supports setting GPIO direction
>> as Input/Output and in case of Output, supports setting value.
>>
>> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
>> Cc: linux-gpio@vger.kernel.org
>> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
>> Cc: Linus Walleij <linus.walleij@linaro.org>
>> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>> ---
>> V2: Use linux/gpio/driver.h instead of linux/gpio.h
> 
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> 
> Are you merging this through MFD?

I thought that was a question for Lee initially , IMO it'd make sense if
this went through one tree.
Lee Jones April 25, 2017, 12:21 p.m. UTC | #3
On Tue, 25 Apr 2017, Marek Vasut wrote:

> On 04/25/2017 11:32 AM, Linus Walleij wrote:
> > On Mon, Apr 24, 2017 at 5:21 PM, Marek Vasut <marek.vasut@gmail.com> wrote:
> > 
> >> Add driver for the GPIO block in the ROHM BD9571MWV-W MFD PMIC.
> >> This block is pretty trivial and supports setting GPIO direction
> >> as Input/Output and in case of Output, supports setting value.
> >>
> >> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
> >> Cc: linux-gpio@vger.kernel.org
> >> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
> >> Cc: Linus Walleij <linus.walleij@linaro.org>
> >> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> >> ---
> >> V2: Use linux/gpio/driver.h instead of linux/gpio.h
> > 
> > Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> > 
> > Are you merging this through MFD?
> 
> I thought that was a question for Lee initially , IMO it'd make sense if
> this went through one tree.

Because your mailer is broken, I know have no idea which thread this
mail belongs to.  Please fix your mailer to reply 'threaded'.
Marek Vasut April 25, 2017, 1:41 p.m. UTC | #4
On 04/25/2017 02:21 PM, Lee Jones wrote:
> On Tue, 25 Apr 2017, Marek Vasut wrote:
> 
>> On 04/25/2017 11:32 AM, Linus Walleij wrote:
>>> On Mon, Apr 24, 2017 at 5:21 PM, Marek Vasut <marek.vasut@gmail.com> wrote:
>>>
>>>> Add driver for the GPIO block in the ROHM BD9571MWV-W MFD PMIC.
>>>> This block is pretty trivial and supports setting GPIO direction
>>>> as Input/Output and in case of Output, supports setting value.
>>>>
>>>> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
>>>> Cc: linux-gpio@vger.kernel.org
>>>> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
>>>> Cc: Linus Walleij <linus.walleij@linaro.org>
>>>> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>>>> ---
>>>> V2: Use linux/gpio/driver.h instead of linux/gpio.h
>>>
>>> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>>>
>>> Are you merging this through MFD?
>>
>> I thought that was a question for Lee initially , IMO it'd make sense if
>> this went through one tree.
> 
> Because your mailer is broken, I know have no idea which thread this
> mail belongs to.  Please fix your mailer to reply 'threaded'.

You just were not on CC for the whole series, just the MFD part,
probably that was the mistake, sorry. PW links below:

https://patchwork.kernel.org/patch/9696589/
https://patchwork.kernel.org/patch/9696591/
https://patchwork.kernel.org/patch/9696597/
https://patchwork.kernel.org/patch/9696593/
Lee Jones April 25, 2017, 2:01 p.m. UTC | #5
On Tue, 25 Apr 2017, Marek Vasut wrote:

> On 04/25/2017 02:21 PM, Lee Jones wrote:
> > On Tue, 25 Apr 2017, Marek Vasut wrote:
> > 
> >> On 04/25/2017 11:32 AM, Linus Walleij wrote:
> >>> On Mon, Apr 24, 2017 at 5:21 PM, Marek Vasut <marek.vasut@gmail.com> wrote:
> >>>
> >>>> Add driver for the GPIO block in the ROHM BD9571MWV-W MFD PMIC.
> >>>> This block is pretty trivial and supports setting GPIO direction
> >>>> as Input/Output and in case of Output, supports setting value.
> >>>>
> >>>> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
> >>>> Cc: linux-gpio@vger.kernel.org
> >>>> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
> >>>> Cc: Linus Walleij <linus.walleij@linaro.org>
> >>>> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> >>>> ---
> >>>> V2: Use linux/gpio/driver.h instead of linux/gpio.h
> >>>
> >>> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> >>>
> >>> Are you merging this through MFD?
> >>
> >> I thought that was a question for Lee initially , IMO it'd make sense if
> >> this went through one tree.
> > 
> > Because your mailer is broken, I know have no idea which thread this
> > mail belongs to.  Please fix your mailer to reply 'threaded'.
> 
> You just were not on CC for the whole series, just the MFD part,
> probably that was the mistake, sorry. PW links below:

Okay, understood.

> https://patchwork.kernel.org/patch/9696589/
> https://patchwork.kernel.org/patch/9696591/
> https://patchwork.kernel.org/patch/9696597/
> https://patchwork.kernel.org/patch/9696593/

This is not the way we do business.  If you want me to take them (and
there is a suitable reason for me to do so i.e. a build-time
dependency), then you're going to have to submit them again as
[RESEND]s with me in Cc.
Marek Vasut April 25, 2017, 6:33 p.m. UTC | #6
On 04/25/2017 04:01 PM, Lee Jones wrote:
> On Tue, 25 Apr 2017, Marek Vasut wrote:
> 
>> On 04/25/2017 02:21 PM, Lee Jones wrote:
>>> On Tue, 25 Apr 2017, Marek Vasut wrote:
>>>
>>>> On 04/25/2017 11:32 AM, Linus Walleij wrote:
>>>>> On Mon, Apr 24, 2017 at 5:21 PM, Marek Vasut <marek.vasut@gmail.com> wrote:
>>>>>
>>>>>> Add driver for the GPIO block in the ROHM BD9571MWV-W MFD PMIC.
>>>>>> This block is pretty trivial and supports setting GPIO direction
>>>>>> as Input/Output and in case of Output, supports setting value.
>>>>>>
>>>>>> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
>>>>>> Cc: linux-gpio@vger.kernel.org
>>>>>> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
>>>>>> Cc: Linus Walleij <linus.walleij@linaro.org>
>>>>>> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>>>>>> ---
>>>>>> V2: Use linux/gpio/driver.h instead of linux/gpio.h
>>>>>
>>>>> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>>>>>
>>>>> Are you merging this through MFD?
>>>>
>>>> I thought that was a question for Lee initially , IMO it'd make sense if
>>>> this went through one tree.
>>>
>>> Because your mailer is broken, I know have no idea which thread this
>>> mail belongs to.  Please fix your mailer to reply 'threaded'.
>>
>> You just were not on CC for the whole series, just the MFD part,
>> probably that was the mistake, sorry. PW links below:
> 
> Okay, understood.
> 
>> https://patchwork.kernel.org/patch/9696589/
>> https://patchwork.kernel.org/patch/9696591/
>> https://patchwork.kernel.org/patch/9696597/
>> https://patchwork.kernel.org/patch/9696593/
> 
> This is not the way we do business.

We?

> If you want me to take them (and
> there is a suitable reason for me to do so i.e. a build-time
> dependency), then you're going to have to submit them again as
> [RESEND]s with me in Cc.

Done
Lee Jones April 26, 2017, 8:46 a.m. UTC | #7
On Tue, 25 Apr 2017, Marek Vasut wrote:
> On 04/25/2017 04:01 PM, Lee Jones wrote:
> > On Tue, 25 Apr 2017, Marek Vasut wrote:
> > 
> >> On 04/25/2017 02:21 PM, Lee Jones wrote:
> >>> On Tue, 25 Apr 2017, Marek Vasut wrote:
> >>>
> >>>> On 04/25/2017 11:32 AM, Linus Walleij wrote:
> >>>>> On Mon, Apr 24, 2017 at 5:21 PM, Marek Vasut <marek.vasut@gmail.com> wrote:
> >>>>>
> >>>>>> Add driver for the GPIO block in the ROHM BD9571MWV-W MFD PMIC.
> >>>>>> This block is pretty trivial and supports setting GPIO direction
> >>>>>> as Input/Output and in case of Output, supports setting value.
> >>>>>>
> >>>>>> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
> >>>>>> Cc: linux-gpio@vger.kernel.org
> >>>>>> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
> >>>>>> Cc: Linus Walleij <linus.walleij@linaro.org>
> >>>>>> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> >>>>>> ---
> >>>>>> V2: Use linux/gpio/driver.h instead of linux/gpio.h
> >>>>>
> >>>>> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> >>>>>
> >>>>> Are you merging this through MFD?
> >>>>
> >>>> I thought that was a question for Lee initially , IMO it'd make sense if
> >>>> this went through one tree.
> >>>
> >>> Because your mailer is broken, I know have no idea which thread this
> >>> mail belongs to.  Please fix your mailer to reply 'threaded'.
> >>
> >> You just were not on CC for the whole series, just the MFD part,
> >> probably that was the mistake, sorry. PW links below:
> > 
> > Okay, understood.
> > 
> >> https://patchwork.kernel.org/patch/9696589/
> >> https://patchwork.kernel.org/patch/9696591/
> >> https://patchwork.kernel.org/patch/9696597/
> >> https://patchwork.kernel.org/patch/9696593/
> > 
> > This is not the way we do business.
> 
> We?

'We' who work in upstream.

'Us' who monitor the MLs, review patches and maintain subsystems.
Marek Vasut April 27, 2017, 6:35 p.m. UTC | #8
On 04/25/2017 11:32 AM, Linus Walleij wrote:
> On Mon, Apr 24, 2017 at 5:21 PM, Marek Vasut <marek.vasut@gmail.com> wrote:
> 
>> Add driver for the GPIO block in the ROHM BD9571MWV-W MFD PMIC.
>> This block is pretty trivial and supports setting GPIO direction
>> as Input/Output and in case of Output, supports setting value.
>>
>> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
>> Cc: linux-gpio@vger.kernel.org
>> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
>> Cc: Linus Walleij <linus.walleij@linaro.org>
>> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>> ---
>> V2: Use linux/gpio/driver.h instead of linux/gpio.h
> 
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> 
> Are you merging this through MFD?

Well, since Mark already picked the regulator patch and since the GPIO
driver is protected from being compiled by an Kconfig symbol, you can
take this through the GPIO tree and I can then ask Lee to apply the MFD
bits via MFD. This will probably reduce the friction a bit ...
diff mbox

Patch

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 63ceed246b6f..62f810a8663c 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -844,6 +844,17 @@  config GPIO_ARIZONA
 	help
 	  Support for GPIOs on Wolfson Arizona class devices.
 
+config GPIO_BD9571MWV
+	tristate "ROHM BD9571 GPIO support"
+	depends on MFD_BD9571MWV
+	help
+	  Support for GPIOs on ROHM BD9571 PMIC. There are two GPIOs
+	  available on the ROHM PMIC in total, both of which can also
+	  generate interrupts.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called gpio-bd9571mwv.
+
 config GPIO_CRYSTAL_COVE
 	tristate "GPIO support for Crystal Cove PMIC"
 	depends on (X86 || COMPILE_TEST) && INTEL_SOC_PMIC
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 095598e856ca..68b96277d9fa 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -33,6 +33,7 @@  obj-$(CONFIG_GPIO_ATH79)	+= gpio-ath79.o
 obj-$(CONFIG_GPIO_ASPEED)	+= gpio-aspeed.o
 obj-$(CONFIG_GPIO_AXP209)	+= gpio-axp209.o
 obj-$(CONFIG_GPIO_BCM_KONA)	+= gpio-bcm-kona.o
+obj-$(CONFIG_GPIO_BD9571MWV)	+= gpio-bd9571mwv.o
 obj-$(CONFIG_GPIO_BRCMSTB)	+= gpio-brcmstb.o
 obj-$(CONFIG_GPIO_BT8XX)	+= gpio-bt8xx.o
 obj-$(CONFIG_GPIO_CLPS711X)	+= gpio-clps711x.o
diff --git a/drivers/gpio/gpio-bd9571mwv.c b/drivers/gpio/gpio-bd9571mwv.c
new file mode 100644
index 000000000000..5224a946e8ab
--- /dev/null
+++ b/drivers/gpio/gpio-bd9571mwv.c
@@ -0,0 +1,144 @@ 
+/*
+ * ROHM BD9571MWV-M GPIO driver
+ *
+ * Copyright (C) 2017 Marek Vasut <marek.vasut+renesas@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License version 2 for more details.
+ *
+ * Based on the TPS65086 driver
+ *
+ * NOTE: Interrupts are not supported yet.
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/bd9571mwv.h>
+
+struct bd9571mwv_gpio {
+	struct gpio_chip chip;
+	struct bd9571mwv *bd;
+};
+
+static int bd9571mwv_gpio_get_direction(struct gpio_chip *chip,
+				       unsigned int offset)
+{
+	struct bd9571mwv_gpio *gpio = gpiochip_get_data(chip);
+	int ret, val;
+
+	ret = regmap_read(gpio->bd->regmap, BD9571MWV_GPIO_DIR, &val);
+	if (ret < 0)
+		return ret;
+
+	return val & BIT(offset);
+}
+
+static int bd9571mwv_gpio_direction_input(struct gpio_chip *chip,
+					 unsigned int offset)
+{
+	struct bd9571mwv_gpio *gpio = gpiochip_get_data(chip);
+
+	regmap_update_bits(gpio->bd->regmap, BD9571MWV_GPIO_DIR,
+			   BIT(offset), 0);
+
+	return 0;
+}
+
+static int bd9571mwv_gpio_direction_output(struct gpio_chip *chip,
+					  unsigned int offset, int value)
+{
+	struct bd9571mwv_gpio *gpio = gpiochip_get_data(chip);
+
+	/* Set the initial value */
+	regmap_update_bits(gpio->bd->regmap, BD9571MWV_GPIO_OUT,
+			   BIT(offset), value ? BIT(offset) : 0);
+	regmap_update_bits(gpio->bd->regmap, BD9571MWV_GPIO_DIR,
+			   BIT(offset), BIT(offset));
+
+	return 0;
+}
+
+static int bd9571mwv_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct bd9571mwv_gpio *gpio = gpiochip_get_data(chip);
+	int ret, val;
+
+	ret = regmap_read(gpio->bd->regmap, BD9571MWV_GPIO_IN, &val);
+	if (ret < 0)
+		return ret;
+
+	return val & BIT(offset);
+}
+
+static void bd9571mwv_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			      int value)
+{
+	struct bd9571mwv_gpio *gpio = gpiochip_get_data(chip);
+
+	regmap_update_bits(gpio->bd->regmap, BD9571MWV_GPIO_OUT,
+			   BIT(offset), value ? BIT(offset) : 0);
+}
+
+static const struct gpio_chip template_chip = {
+	.label			= "bd9571mwv-gpio",
+	.owner			= THIS_MODULE,
+	.get_direction		= bd9571mwv_gpio_get_direction,
+	.direction_input	= bd9571mwv_gpio_direction_input,
+	.direction_output	= bd9571mwv_gpio_direction_output,
+	.get			= bd9571mwv_gpio_get,
+	.set			= bd9571mwv_gpio_set,
+	.base			= -1,
+	.ngpio			= 2,
+	.can_sleep		= true,
+};
+
+static int bd9571mwv_gpio_probe(struct platform_device *pdev)
+{
+	struct bd9571mwv_gpio *gpio;
+	int ret;
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, gpio);
+
+	gpio->bd = dev_get_drvdata(pdev->dev.parent);
+	gpio->chip = template_chip;
+	gpio->chip.parent = gpio->bd->dev;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id bd9571mwv_gpio_id_table[] = {
+	{ "bd9571mwv-gpio", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, bd9571mwv_gpio_id_table);
+
+static struct platform_driver bd9571mwv_gpio_driver = {
+	.driver = {
+		.name = "bd9571mwv-gpio",
+	},
+	.probe = bd9571mwv_gpio_probe,
+	.id_table = bd9571mwv_gpio_id_table,
+};
+module_platform_driver(bd9571mwv_gpio_driver);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut+renesas@gmail.com>");
+MODULE_DESCRIPTION("BD9571MWV GPIO driver");
+MODULE_LICENSE("GPL v2");