| Message ID | 20170327094520.3129-1-kishon@ti.com |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On 03/27/2017 11:44 AM, Kishon Vijay Abraham I wrote: > Hi Bjorn, > > Please find the pull request for PCI endpoint support below. I've > also included all the history here. > > Changes from v4: > *) add #syscon-cells property and used of_parse_phandle_with_args > to perform a configuration in syscon module (as suggested by > Rob Herring) > *) Remove unnecessary white space. > > Changes from v3: > *) fixed a typo and adapted to https://lkml.org/lkml/2017/3/13/562. > > Changes from v2: > *) changed the configfs structure as suggested by Christoph Hellwig. With > this change the framework creates configfs entry for EP function driver > and EP controller. Previously these entries have to be created by the > the user. (Haven't changed the epc core or epf core except for invoking > configfs APIs to create entries for EP function driver and EP controller. > That's mostly because the EP function device can still be created by > directly invoking the epf core API without using configfs). > *) Now the user has to use configfs entry 'start' to start the link. > This was previously done by the function driver. However in the case of > multi function EP, the function driver shouldn't start the link. > > Changes from v1: > *) The preparation patches for adding EP support is removed and is sent > separately > *) Added device ID for DRA74x/DRA72x and used it instead of > using "PCI_ANY_ID" > *) Added userguide for PCI endpoint test function > > Major Improvements from RFC: > *) support multi-function devices (hw supported not virtual) > *) Access host side buffers > *) Raise MSI interrupts > *) Add user space program to use the host side PCI driver > *) Adapt all other users of designware to use the new design (only > compile tested. Since I have only dra7xx boards, the new design > has only been tested in dra7xx. I'd require the help of others > to test the platforms they have access to). > > This series has been developed over 4.11-rc1 + [1] > [1] -> https://lkml.org/lkml/2017/3/13/562 > > Let me know if this has to be re-based to some of your branch. > > Thanks > Kishon > > The following changes since commit 623e87fec8ab7867fb51b3079196bd10718a60ce: > > PCI: dwc: dra7xx: Push request_irq call to the bottom of probe (2017-03-22 20:35:30 +0530) > > are available in the git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/kishon/pci-endpoint.git tags/pci-endpoint-for-4.12 > > for you to fetch changes up to e98bf80074be4654faae42fe0f5a622a776b6fdd: > > ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP (2017-03-27 15:08:22 +0530) > > ---------------------------------------------------------------- FWIW: I've tested Kishon's tag pci-endpoint-for-4.12 and PCIe on artpec6 SoC is still working fine. I also included the DRA7xx PCIe driver in my kernel so that pcie-designware-ep.c gets built. My only worry is that the code in pcie-designware-ep.c is not compile tested if DRA7xx is not selected (as it is the only driver using PCIE_DW_EP at the moment). -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Niklas, On Wednesday 29 March 2017 05:12 PM, Niklas Cassel wrote: > On 03/27/2017 11:44 AM, Kishon Vijay Abraham I wrote: >> Hi Bjorn, >> >> Please find the pull request for PCI endpoint support below. I've >> also included all the history here. >> >> Changes from v4: >> *) add #syscon-cells property and used of_parse_phandle_with_args >> to perform a configuration in syscon module (as suggested by >> Rob Herring) >> *) Remove unnecessary white space. >> >> Changes from v3: >> *) fixed a typo and adapted to https://lkml.org/lkml/2017/3/13/562. >> >> Changes from v2: >> *) changed the configfs structure as suggested by Christoph Hellwig. With >> this change the framework creates configfs entry for EP function driver >> and EP controller. Previously these entries have to be created by the >> the user. (Haven't changed the epc core or epf core except for invoking >> configfs APIs to create entries for EP function driver and EP controller. >> That's mostly because the EP function device can still be created by >> directly invoking the epf core API without using configfs). >> *) Now the user has to use configfs entry 'start' to start the link. >> This was previously done by the function driver. However in the case of >> multi function EP, the function driver shouldn't start the link. >> >> Changes from v1: >> *) The preparation patches for adding EP support is removed and is sent >> separately >> *) Added device ID for DRA74x/DRA72x and used it instead of >> using "PCI_ANY_ID" >> *) Added userguide for PCI endpoint test function >> >> Major Improvements from RFC: >> *) support multi-function devices (hw supported not virtual) >> *) Access host side buffers >> *) Raise MSI interrupts >> *) Add user space program to use the host side PCI driver >> *) Adapt all other users of designware to use the new design (only >> compile tested. Since I have only dra7xx boards, the new design >> has only been tested in dra7xx. I'd require the help of others >> to test the platforms they have access to). >> >> This series has been developed over 4.11-rc1 + [1] >> [1] -> https://lkml.org/lkml/2017/3/13/562 >> >> Let me know if this has to be re-based to some of your branch. >> >> Thanks >> Kishon >> >> The following changes since commit 623e87fec8ab7867fb51b3079196bd10718a60ce: >> >> PCI: dwc: dra7xx: Push request_irq call to the bottom of probe (2017-03-22 20:35:30 +0530) >> >> are available in the git repository at: >> >> git://git.kernel.org/pub/scm/linux/kernel/git/kishon/pci-endpoint.git tags/pci-endpoint-for-4.12 >> >> for you to fetch changes up to e98bf80074be4654faae42fe0f5a622a776b6fdd: >> >> ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP (2017-03-27 15:08:22 +0530) >> >> ---------------------------------------------------------------- > > FWIW: > I've tested Kishon's tag pci-endpoint-for-4.12 > and PCIe on artpec6 SoC is still working fine. Thanks for testing it. > > I also included the DRA7xx PCIe driver in my > kernel so that pcie-designware-ep.c gets built. > > My only worry is that the code in pcie-designware-ep.c > is not compile tested if DRA7xx is not selected > (as it is the only driver using PCIE_DW_EP at > the moment). yeah, we should plan to include COMPILE_TEST in all pci drivers but I guess there is some problem with non-ARM builds [1]. As Bjorn mentioned in the thread, we could add #ifdef ARM and then include COMPILE_TEST. Thanks Kishon [1] -> http://www.spinics.net/lists/linux-pci/msg58134.html Thanks Kishon > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Wednesday 29 March 2017 05:40 PM, Kishon Vijay Abraham I wrote: > Hi Niklas, > > On Wednesday 29 March 2017 05:12 PM, Niklas Cassel wrote: >> On 03/27/2017 11:44 AM, Kishon Vijay Abraham I wrote: >>> Hi Bjorn, >>> >>> Please find the pull request for PCI endpoint support below. I've >>> also included all the history here. >>> >>> Changes from v4: >>> *) add #syscon-cells property and used of_parse_phandle_with_args >>> to perform a configuration in syscon module (as suggested by >>> Rob Herring) >>> *) Remove unnecessary white space. >>> >>> Changes from v3: >>> *) fixed a typo and adapted to https://lkml.org/lkml/2017/3/13/562. >>> >>> Changes from v2: >>> *) changed the configfs structure as suggested by Christoph Hellwig. With >>> this change the framework creates configfs entry for EP function driver >>> and EP controller. Previously these entries have to be created by the >>> the user. (Haven't changed the epc core or epf core except for invoking >>> configfs APIs to create entries for EP function driver and EP controller. >>> That's mostly because the EP function device can still be created by >>> directly invoking the epf core API without using configfs). >>> *) Now the user has to use configfs entry 'start' to start the link. >>> This was previously done by the function driver. However in the case of >>> multi function EP, the function driver shouldn't start the link. >>> >>> Changes from v1: >>> *) The preparation patches for adding EP support is removed and is sent >>> separately >>> *) Added device ID for DRA74x/DRA72x and used it instead of >>> using "PCI_ANY_ID" >>> *) Added userguide for PCI endpoint test function >>> >>> Major Improvements from RFC: >>> *) support multi-function devices (hw supported not virtual) >>> *) Access host side buffers >>> *) Raise MSI interrupts >>> *) Add user space program to use the host side PCI driver >>> *) Adapt all other users of designware to use the new design (only >>> compile tested. Since I have only dra7xx boards, the new design >>> has only been tested in dra7xx. I'd require the help of others >>> to test the platforms they have access to). >>> >>> This series has been developed over 4.11-rc1 + [1] >>> [1] -> https://lkml.org/lkml/2017/3/13/562 >>> >>> Let me know if this has to be re-based to some of your branch. >>> >>> Thanks >>> Kishon >>> >>> The following changes since commit 623e87fec8ab7867fb51b3079196bd10718a60ce: >>> >>> PCI: dwc: dra7xx: Push request_irq call to the bottom of probe (2017-03-22 20:35:30 +0530) >>> >>> are available in the git repository at: >>> >>> git://git.kernel.org/pub/scm/linux/kernel/git/kishon/pci-endpoint.git tags/pci-endpoint-for-4.12 >>> >>> for you to fetch changes up to e98bf80074be4654faae42fe0f5a622a776b6fdd: >>> >>> ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP (2017-03-27 15:08:22 +0530) >>> >>> ---------------------------------------------------------------- >> >> FWIW: >> I've tested Kishon's tag pci-endpoint-for-4.12 >> and PCIe on artpec6 SoC is still working fine. > > Thanks for testing it. >> >> I also included the DRA7xx PCIe driver in my >> kernel so that pcie-designware-ep.c gets built. >> >> My only worry is that the code in pcie-designware-ep.c >> is not compile tested if DRA7xx is not selected >> (as it is the only driver using PCIE_DW_EP at >> the moment). > > yeah, we should plan to include COMPILE_TEST in all pci drivers but I guess > there is some problem with non-ARM builds [1]. As Bjorn mentioned in the > thread, we could add #ifdef ARM and then include COMPILE_TEST. I think I misunderstood your concern. yeah, there is no direct way to compile pcie-designware-ep.c without selecting DRA7xx. Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 03/29/2017 02:36 PM, Kishon Vijay Abraham I wrote: (snip) >>> >>> FWIW: >>> I've tested Kishon's tag pci-endpoint-for-4.12 >>> and PCIe on artpec6 SoC is still working fine. >> >> Thanks for testing it. >>> >>> I also included the DRA7xx PCIe driver in my >>> kernel so that pcie-designware-ep.c gets built. >>> >>> My only worry is that the code in pcie-designware-ep.c >>> is not compile tested if DRA7xx is not selected >>> (as it is the only driver using PCIE_DW_EP at >>> the moment). >> >> yeah, we should plan to include COMPILE_TEST in all pci drivers but I guess >> there is some problem with non-ARM builds [1]. As Bjorn mentioned in the >> thread, we could add #ifdef ARM and then include COMPILE_TEST. > > I think I misunderstood your concern. yeah, there is no direct way to compile > pcie-designware-ep.c without selecting DRA7xx. There is no way to compile pcie-designware-host.c + pcie-designware.c without selecting a driver that selects PCIE_DW_HOST, so I guess the same "problem" applies there. As long as kbuild builds PCI_DRA7XX_EP (and any driver that selects PCIE_DW_HOST), we should be fine. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Bjorn, Please find the pull request for PCI endpoint support below. I've also included all the history here. Changes from v4: *) add #syscon-cells property and used of_parse_phandle_with_args to perform a configuration in syscon module (as suggested by Rob Herring) *) Remove unnecessary white space. Changes from v3: *) fixed a typo and adapted to https://lkml.org/lkml/2017/3/13/562. Changes from v2: *) changed the configfs structure as suggested by Christoph Hellwig. With this change the framework creates configfs entry for EP function driver and EP controller. Previously these entries have to be created by the the user. (Haven't changed the epc core or epf core except for invoking configfs APIs to create entries for EP function driver and EP controller. That's mostly because the EP function device can still be created by directly invoking the epf core API without using configfs). *) Now the user has to use configfs entry 'start' to start the link. This was previously done by the function driver. However in the case of multi function EP, the function driver shouldn't start the link. Changes from v1: *) The preparation patches for adding EP support is removed and is sent separately *) Added device ID for DRA74x/DRA72x and used it instead of using "PCI_ANY_ID" *) Added userguide for PCI endpoint test function Major Improvements from RFC: *) support multi-function devices (hw supported not virtual) *) Access host side buffers *) Raise MSI interrupts *) Add user space program to use the host side PCI driver *) Adapt all other users of designware to use the new design (only compile tested. Since I have only dra7xx boards, the new design has only been tested in dra7xx. I'd require the help of others to test the platforms they have access to). This series has been developed over 4.11-rc1 + [1] [1] -> https://lkml.org/lkml/2017/3/13/562 Let me know if this has to be re-based to some of your branch. Thanks Kishon The following changes since commit 623e87fec8ab7867fb51b3079196bd10718a60ce: PCI: dwc: dra7xx: Push request_irq call to the bottom of probe (2017-03-22 20:35:30 +0530) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/kishon/pci-endpoint.git tags/pci-endpoint-for-4.12 for you to fetch changes up to e98bf80074be4654faae42fe0f5a622a776b6fdd: ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP (2017-03-27 15:08:22 +0530) ---------------------------------------------------------------- pci: endpoint: for 4.12 *) Add PCI endpoint core layer *) Modify designware and dra7xx driver to be configured in EP mode *) Add a PCI endpoint *test* function driver and corresponding host driver Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> ---------------------------------------------------------------- Kishon Vijay Abraham I (24): PCI: endpoint: Add EP core layer to enable EP controller and EP functions Documentation: PCI: Guide to use PCI Endpoint Core Layer PCI: endpoint: Introduce configfs entry for configuring EP functions Documentation: PCI: Guide to use pci endpoint configfs PCI: endpoint: Create configfs entry for EPC device and EPF driver Documentation: PCI: Add specification for the *pci test* function device PCI: endpoint: functions: Add an EP function to test PCI Documentation: PCI: Add binding documentation for pci-test endpoint function PCI: dwc: designware: Add EP mode support dt-bindings: PCI: Add dt bindings for pci designware EP mode PCI: dwc: dra7xx: Facilitate wrapper and msi interrupts to be enabled independently PCI: dwc: dra7xx: Add EP mode support dt-bindings: PCI: dra7xx: Add dt bindings for pci dra7xx EP mode dt-bindings: mfd: syscon: Add documentation for #syscon-cells property PCI: dwc: dra7xx: Workaround for errata id i870 dt-bindings: PCI: dra7xx: Add dt bindings to enable unaligned access PCI: Add device IDs for DRA74x and DRA72x misc: Add host side pci driver for pci test function device Documentation: misc-devices: Add Documentation for pci-endpoint-test driver tools: PCI: Add a userspace tool to test PCI endpoint tools: PCI: Add sample test script to invoke pcitest Documentation: PCI: Add userguide for PCI endpoint test function MAINTAINERS: add PCI EP maintainer ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP Documentation/PCI/00-INDEX | 10 +++ Documentation/PCI/endpoint/function/binding/pci-test.txt | 17 +++++ Documentation/PCI/endpoint/pci-endpoint-cfs.txt | 105 ++++++++++++++++++++++++++ Documentation/PCI/endpoint/pci-endpoint.txt | 215 ++++++++++++++++++++++++++++++++++++++++++++++++++++ Documentation/PCI/endpoint/pci-test-function.txt | 66 ++++++++++++++++ Documentation/PCI/endpoint/pci-test-howto.txt | 179 +++++++++++++++++++++++++++++++++++++++++++ Documentation/devicetree/bindings/mfd/syscon.txt | 2 + Documentation/devicetree/bindings/pci/designware-pcie.txt | 26 +++++-- Documentation/devicetree/bindings/pci/ti-pci.txt | 42 +++++++++-- Documentation/misc-devices/pci-endpoint-test.txt | 35 +++++++++ MAINTAINERS | 9 +++ arch/arm/mach-omap2/clockdomains7xx_data.c | 2 +- drivers/Makefile | 2 + drivers/misc/Kconfig | 7 ++ drivers/misc/Makefile | 1 + drivers/misc/pci_endpoint_test.c | 534 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/pci/Kconfig | 1 + drivers/pci/dwc/Kconfig | 36 ++++++++- drivers/pci/dwc/Makefile | 5 +- drivers/pci/dwc/pci-dra7xx.c | 268 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----- drivers/pci/dwc/pcie-designware-ep.c | 342 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/pci/dwc/pcie-designware.c | 125 ++++++++++++++++++++++++++++++ drivers/pci/dwc/pcie-designware.h | 112 +++++++++++++++++++++++++++ drivers/pci/endpoint/Kconfig | 31 ++++++++ drivers/pci/endpoint/Makefile | 7 ++ drivers/pci/endpoint/functions/Kconfig | 12 +++ drivers/pci/endpoint/functions/Makefile | 5 ++ drivers/pci/endpoint/functions/pci-epf-test.c | 510 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/pci/endpoint/pci-ep-cfs.c | 509 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/pci/endpoint/pci-epc-core.c | 579 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/pci/endpoint/pci-epc-mem.c | 143 +++++++++++++++++++++++++++++++++++ drivers/pci/endpoint/pci-epf-core.c | 351 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ include/linux/mod_devicetable.h | 10 +++ include/linux/pci-ep-cfs.h | 41 ++++++++++ include/linux/pci-epc.h | 144 +++++++++++++++++++++++++++++++++++ include/linux/pci-epf.h | 162 +++++++++++++++++++++++++++++++++++++++ include/linux/pci_ids.h | 2 + include/uapi/linux/Kbuild | 1 + include/uapi/linux/pcitest.h | 19 +++++ tools/pci/pcitest.c | 186 +++++++++++++++++++++++++++++++++++++++++++++ tools/pci/pcitest.sh | 56 ++++++++++++++ 41 files changed, 4869 insertions(+), 40 deletions(-) create mode 100644 Documentation/PCI/endpoint/function/binding/pci-test.txt create mode 100644 Documentation/PCI/endpoint/pci-endpoint-cfs.txt create mode 100644 Documentation/PCI/endpoint/pci-endpoint.txt create mode 100644 Documentation/PCI/endpoint/pci-test-function.txt create mode 100644 Documentation/PCI/endpoint/pci-test-howto.txt create mode 100644 Documentation/misc-devices/pci-endpoint-test.txt create mode 100644 drivers/misc/pci_endpoint_test.c create mode 100644 drivers/pci/dwc/pcie-designware-ep.c create mode 100644 drivers/pci/endpoint/Kconfig create mode 100644 drivers/pci/endpoint/Makefile create mode 100644 drivers/pci/endpoint/functions/Kconfig create mode 100644 drivers/pci/endpoint/functions/Makefile create mode 100644 drivers/pci/endpoint/functions/pci-epf-test.c create mode 100644 drivers/pci/endpoint/pci-ep-cfs.c create mode 100644 drivers/pci/endpoint/pci-epc-core.c create mode 100644 drivers/pci/endpoint/pci-epc-mem.c create mode 100644 drivers/pci/endpoint/pci-epf-core.c create mode 100644 include/linux/pci-ep-cfs.h create mode 100644 include/linux/pci-epc.h create mode 100644 include/linux/pci-epf.h create mode 100644 include/uapi/linux/pcitest.h create mode 100644 tools/pci/pcitest.c create mode 100644 tools/pci/pcitest.sh