@@ -133,26 +133,6 @@ enum access_mode {
};
/**
- * fsmc_nand_platform_data - platform specific NAND controller config
- * @nand_timings: timing setup for the physical NAND interface
- * @partitions: partition table for the platform, use a default fallback
- * if this is NULL
- * @nr_partitions: the number of partitions in the previous entry
- * @options: different options for the driver
- * @width: bus width
- * @bank: default bank
- * platform-specific. If the controller only supports one bank
- * this may be set to NULL
- */
-struct fsmc_nand_platform_data {
- struct fsmc_nand_timings *nand_timings;
- unsigned int options;
- unsigned int bank;
-
- enum access_mode mode;
-};
-
-/**
* struct fsmc_nand_data - structure for FSMC NAND device state
*
* @pid: Part ID on the AMBA PrimeCell format
@@ -877,17 +857,18 @@ static bool filter(struct dma_chan *chan, void *slave)
}
static int fsmc_nand_probe_config_dt(struct platform_device *pdev,
- struct device_node *np)
+ struct fsmc_nand_data *host,
+ struct nand_chip *nand)
{
- struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct device_node *np = pdev->dev.of_node;
u32 val;
int ret;
- pdata->options = 0;
+ nand->options = 0;
if (!of_property_read_u32(np, "bank-width", &val)) {
if (val == 2) {
- pdata->options |= NAND_BUSWIDTH_16;
+ nand->options |= NAND_BUSWIDTH_16;
} else if (val != 1) {
dev_err(&pdev->dev, "invalid bank-width %u\n", val);
return -EINVAL;
@@ -895,25 +876,26 @@ static int fsmc_nand_probe_config_dt(struct platform_device *pdev,
}
if (of_get_property(np, "nand-skip-bbtscan", NULL))
- pdata->options |= NAND_SKIP_BBTSCAN;
+ nand->options |= NAND_SKIP_BBTSCAN;
- pdata->nand_timings = devm_kzalloc(&pdev->dev,
- sizeof(*pdata->nand_timings), GFP_KERNEL);
- if (!pdata->nand_timings)
+ host->dev_timings =
+ devm_kzalloc(&pdev->dev, sizeof(*host->dev_timings),
+ GFP_KERNEL);
+ if (!host->dev_timings)
return -ENOMEM;
- ret = of_property_read_u8_array(np, "timings", (u8 *)pdata->nand_timings,
- sizeof(*pdata->nand_timings));
+ ret = of_property_read_u8_array(np, "timings", (u8 *)host->dev_timings,
+ sizeof(*host->dev_timings));
if (ret)
- pdata->nand_timings = NULL;
+ host->dev_timings = NULL;
/* Set default NAND bank to 0 */
- pdata->bank = 0;
+ host->bank = 0;
if (!of_property_read_u32(np, "bank", &val)) {
if (val > 3) {
dev_err(&pdev->dev, "invalid bank %u\n", val);
return -EINVAL;
}
- pdata->bank = val;
+ host->bank = val;
}
return 0;
}
@@ -924,8 +906,6 @@ static int fsmc_nand_probe_config_dt(struct platform_device *pdev,
*/
static int __init fsmc_nand_probe(struct platform_device *pdev)
{
- struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
- struct device_node __maybe_unused *np = pdev->dev.of_node;
struct fsmc_nand_data *host;
struct mtd_info *mtd;
struct nand_chip *nand;
@@ -935,22 +915,17 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
u32 pid;
int i;
- pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
- if (!pdata)
- return -ENOMEM;
-
- pdev->dev.platform_data = pdata;
- ret = fsmc_nand_probe_config_dt(pdev, np);
- if (ret) {
- dev_err(&pdev->dev, "no platform data\n");
- return -ENODEV;
- }
-
/* Allocate memory for the device structure (and zero it) */
host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
if (!host)
return -ENOMEM;
+ nand = &host->nand;
+
+ ret = fsmc_nand_probe_config_dt(pdev, host, nand);
+ if (ret)
+ return ret;
+
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data");
host->data_va = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(host->data_va))
@@ -995,19 +970,15 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
AMBA_PART_BITS(pid), AMBA_MANF_BITS(pid),
AMBA_REV_BITS(pid), AMBA_CONFIG_BITS(pid));
- host->bank = pdata->bank;
host->dev = &pdev->dev;
- host->dev_timings = pdata->nand_timings;
- host->mode = pdata->mode;
if (host->mode == USE_DMA_ACCESS)
init_completion(&host->dma_access_complete);
/* Link all private pointers */
mtd = nand_to_mtd(&host->nand);
- nand = &host->nand;
nand_set_controller_data(nand, host);
- nand_set_flash_node(nand, np);
+ nand_set_flash_node(nand, pdev->dev.of_node);
mtd->dev.parent = &pdev->dev;
nand->IO_ADDR_R = host->data_va;
@@ -1022,7 +993,6 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
nand->ecc.mode = NAND_ECC_HW;
nand->ecc.hwctl = fsmc_enable_hwecc;
nand->ecc.size = 512;
- nand->options = pdata->options;
nand->badblockbits = 7;
nand->setup_data_interface = fsmc_setup_data_interface;
Since the driver now only supports DT probing, it doesn't make a lot of sense to have a private data structure called platform_data, fill it in with information coming from the DT, and then copying this into the driver-specific structure fsmc_nand_data. So instead, we remove fsmc_nand_platform_data entirely, and have fsmc_nand_probe_config_dt() fill in the fsmc_nand_data structure directly. This requires calling fsmc_nand_probe_config_dt() after fsmc_nand_data has been allocated instead of before. Also, as an added bonus, we now propagate properly the return value of fsmc_nand_probe_config_dt() instead of returning -ENODEV on failure. The error message is also removed, since it no longer made any sense. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> --- drivers/mtd/nand/fsmc_nand.c | 74 +++++++++++++------------------------------- 1 file changed, 22 insertions(+), 52 deletions(-)