Message ID | 20170310111150.9480-1-Vincent.Riera@imgtec.com |
---|---|
State | Superseded |
Headers | show |
Hello, Cc'ing Gustavo, who said he would have a look at this issue. On Fri, 10 Mar 2017 11:11:50 +0000, Vicente Olivert Riera wrote: > The --disable-egl configure option doesn't exist: > > configure: WARNING: unrecognized options: [snip] --disable-egl > > If you don't have EGL support the configure script will fail like this: > > checking for EGL... no > configure: error: Package requirements (egl) were not met: > > Fixes: > http://autobuild.buildroot.net/results/3eca5ba26a521f6cc5a611309ba066472af7769c > http://autobuild.buildroot.net/results/cf9ec7da196d70548ae1413e4a3730314f6434d6 > http://autobuild.buildroot.net/results/069b80101afc4719db6d6d41cf5fc923be21ddc0 > > Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com> > --- > package/libepoxy/Config.in | 6 +++--- > package/libepoxy/libepoxy.mk | 9 +-------- > 2 files changed, 4 insertions(+), 11 deletions(-) > > diff --git a/package/libepoxy/Config.in b/package/libepoxy/Config.in > index c87366a..54b8272 100644 > --- a/package/libepoxy/Config.in > +++ b/package/libepoxy/Config.in > @@ -1,12 +1,12 @@ > config BR2_PACKAGE_LIBEPOXY > bool "libepoxy" > select BR2_PACKAGE_XUTIL_UTIL_MACROS > - depends on BR2_PACKAGE_HAS_LIBEGL || BR2_PACKAGE_HAS_LIBGL > + depends on BR2_PACKAGE_HAS_LIBEGL Really egl only is sufficient? This seems dubious. It doesn't need at least OpenGL ES ? Thomas
Hi Thomas, On 10/03/17 15:01, Thomas Petazzoni wrote: > Hello, > > Cc'ing Gustavo, who said he would have a look at this issue. he already was on CC. > On Fri, 10 Mar 2017 11:11:50 +0000, Vicente Olivert Riera wrote: >> The --disable-egl configure option doesn't exist: >> >> configure: WARNING: unrecognized options: [snip] --disable-egl >> >> If you don't have EGL support the configure script will fail like this: >> >> checking for EGL... no >> configure: error: Package requirements (egl) were not met: >> >> Fixes: >> http://autobuild.buildroot.net/results/3eca5ba26a521f6cc5a611309ba066472af7769c >> http://autobuild.buildroot.net/results/cf9ec7da196d70548ae1413e4a3730314f6434d6 >> http://autobuild.buildroot.net/results/069b80101afc4719db6d6d41cf5fc923be21ddc0 >> >> Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com> >> --- >> package/libepoxy/Config.in | 6 +++--- >> package/libepoxy/libepoxy.mk | 9 +-------- >> 2 files changed, 4 insertions(+), 11 deletions(-) >> >> diff --git a/package/libepoxy/Config.in b/package/libepoxy/Config.in >> index c87366a..54b8272 100644 >> --- a/package/libepoxy/Config.in >> +++ b/package/libepoxy/Config.in >> @@ -1,12 +1,12 @@ >> config BR2_PACKAGE_LIBEPOXY >> bool "libepoxy" >> select BR2_PACKAGE_XUTIL_UTIL_MACROS >> - depends on BR2_PACKAGE_HAS_LIBEGL || BR2_PACKAGE_HAS_LIBGL >> + depends on BR2_PACKAGE_HAS_LIBEGL > > Really egl only is sufficient? This seems dubious. It doesn't need at > least OpenGL ES ? I have successfully build tested it without Xorg and without OpenGL ES support (just OpenGL EGL). Vincent > Thomas >
Hi again Thomas, On 10/03/17 15:05, Vicente Olivert Riera wrote: > Hi Thomas, > > On 10/03/17 15:01, Thomas Petazzoni wrote: >> Hello, >> >> Cc'ing Gustavo, who said he would have a look at this issue. > > he already was on CC. > >> On Fri, 10 Mar 2017 11:11:50 +0000, Vicente Olivert Riera wrote: >>> The --disable-egl configure option doesn't exist: >>> >>> configure: WARNING: unrecognized options: [snip] --disable-egl >>> >>> If you don't have EGL support the configure script will fail like this: >>> >>> checking for EGL... no >>> configure: error: Package requirements (egl) were not met: >>> >>> Fixes: >>> http://autobuild.buildroot.net/results/3eca5ba26a521f6cc5a611309ba066472af7769c >>> http://autobuild.buildroot.net/results/cf9ec7da196d70548ae1413e4a3730314f6434d6 >>> http://autobuild.buildroot.net/results/069b80101afc4719db6d6d41cf5fc923be21ddc0 >>> >>> Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com> >>> --- >>> package/libepoxy/Config.in | 6 +++--- >>> package/libepoxy/libepoxy.mk | 9 +-------- >>> 2 files changed, 4 insertions(+), 11 deletions(-) >>> >>> diff --git a/package/libepoxy/Config.in b/package/libepoxy/Config.in >>> index c87366a..54b8272 100644 >>> --- a/package/libepoxy/Config.in >>> +++ b/package/libepoxy/Config.in >>> @@ -1,12 +1,12 @@ >>> config BR2_PACKAGE_LIBEPOXY >>> bool "libepoxy" >>> select BR2_PACKAGE_XUTIL_UTIL_MACROS >>> - depends on BR2_PACKAGE_HAS_LIBEGL || BR2_PACKAGE_HAS_LIBGL >>> + depends on BR2_PACKAGE_HAS_LIBEGL >> >> Really egl only is sufficient? This seems dubious. It doesn't need at >> least OpenGL ES ? > > I have successfully build tested it without Xorg and without OpenGL ES > support (just OpenGL EGL). you can try it with this minimal defconfig: BR2_mips=y BR2_mips_32r2=y BR2_TOOLCHAIN_EXTERNAL=y BR2_PACKAGE_MESA3D=y BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SWRAST=y BR2_PACKAGE_MESA3D_OPENGL_EGL=y BR2_PACKAGE_LIBEPOXY=y Vincent > > Vincent > >> Thomas >> > _______________________________________________ > buildroot mailing list > buildroot@busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot >
Hi Vicente, Thomas, All, Le 10/03/2017 à 16:05, Vicente Olivert Riera a écrit : > Hi Thomas, > > On 10/03/17 15:01, Thomas Petazzoni wrote: >> Hello, >> >> Cc'ing Gustavo, who said he would have a look at this issue. > > he already was on CC. > >> On Fri, 10 Mar 2017 11:11:50 +0000, Vicente Olivert Riera wrote: >>> The --disable-egl configure option doesn't exist: >>> >>> configure: WARNING: unrecognized options: [snip] --disable-egl >>> >>> If you don't have EGL support the configure script will fail like this: >>> >>> checking for EGL... no >>> configure: error: Package requirements (egl) were not met: >>> >>> Fixes: >>> http://autobuild.buildroot.net/results/3eca5ba26a521f6cc5a611309ba066472af7769c >>> http://autobuild.buildroot.net/results/cf9ec7da196d70548ae1413e4a3730314f6434d6 >>> http://autobuild.buildroot.net/results/069b80101afc4719db6d6d41cf5fc923be21ddc0 >>> >>> Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com> >>> --- >>> package/libepoxy/Config.in | 6 +++--- >>> package/libepoxy/libepoxy.mk | 9 +-------- >>> 2 files changed, 4 insertions(+), 11 deletions(-) >>> >>> diff --git a/package/libepoxy/Config.in b/package/libepoxy/Config.in >>> index c87366a..54b8272 100644 >>> --- a/package/libepoxy/Config.in >>> +++ b/package/libepoxy/Config.in >>> @@ -1,12 +1,12 @@ >>> config BR2_PACKAGE_LIBEPOXY >>> bool "libepoxy" >>> select BR2_PACKAGE_XUTIL_UTIL_MACROS >>> - depends on BR2_PACKAGE_HAS_LIBEGL || BR2_PACKAGE_HAS_LIBGL >>> + depends on BR2_PACKAGE_HAS_LIBEGL >> >> Really egl only is sufficient? This seems dubious. It doesn't need at >> least OpenGL ES ? > > I have successfully build tested it without Xorg and without OpenGL ES > support (just OpenGL EGL). I'm using a x86 PC with HD6310 graphic card and mesa3d as OpenGL provider. In order to enable glamor in the X server, I selected libepoxy and had the build issue since libegl wasn't selected. Indeed, there is no option --disable-egl in libepoxy, and libegl is mandatory for Linux target. Did you check the libepoxy reverse dependencies ? It seems we need to forward libegl dependency to libgtk3 package. With that fixed: Reviewed-by: Romain Naour <romain.naour@gmail.com> Tested-by: Romain Naour <romain.naour@gmail.com> Best regards, Romain > > Vincent > >> Thomas >> > _______________________________________________ > buildroot mailing list > buildroot@busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot >
Le 19/03/2017 à 21:45, Romain Naour a écrit : > Hi Vicente, Thomas, All, > > Le 10/03/2017 à 16:05, Vicente Olivert Riera a écrit : >> Hi Thomas, >> >> On 10/03/17 15:01, Thomas Petazzoni wrote: >>> Hello, >>> >>> Cc'ing Gustavo, who said he would have a look at this issue. >> >> he already was on CC. >> >>> On Fri, 10 Mar 2017 11:11:50 +0000, Vicente Olivert Riera wrote: >>>> The --disable-egl configure option doesn't exist: >>>> >>>> configure: WARNING: unrecognized options: [snip] --disable-egl >>>> >>>> If you don't have EGL support the configure script will fail like this: >>>> >>>> checking for EGL... no >>>> configure: error: Package requirements (egl) were not met: >>>> >>>> Fixes: >>>> http://autobuild.buildroot.net/results/3eca5ba26a521f6cc5a611309ba066472af7769c >>>> http://autobuild.buildroot.net/results/cf9ec7da196d70548ae1413e4a3730314f6434d6 >>>> http://autobuild.buildroot.net/results/069b80101afc4719db6d6d41cf5fc923be21ddc0 >>>> >>>> Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com> >>>> --- >>>> package/libepoxy/Config.in | 6 +++--- >>>> package/libepoxy/libepoxy.mk | 9 +-------- >>>> 2 files changed, 4 insertions(+), 11 deletions(-) >>>> >>>> diff --git a/package/libepoxy/Config.in b/package/libepoxy/Config.in >>>> index c87366a..54b8272 100644 >>>> --- a/package/libepoxy/Config.in >>>> +++ b/package/libepoxy/Config.in >>>> @@ -1,12 +1,12 @@ >>>> config BR2_PACKAGE_LIBEPOXY >>>> bool "libepoxy" >>>> select BR2_PACKAGE_XUTIL_UTIL_MACROS >>>> - depends on BR2_PACKAGE_HAS_LIBEGL || BR2_PACKAGE_HAS_LIBGL >>>> + depends on BR2_PACKAGE_HAS_LIBEGL >>> >>> Really egl only is sufficient? This seems dubious. It doesn't need at >>> least OpenGL ES ? >> >> I have successfully build tested it without Xorg and without OpenGL ES >> support (just OpenGL EGL). > > I'm using a x86 PC with HD6310 graphic card and mesa3d as OpenGL provider. > In order to enable glamor in the X server, I selected libepoxy and had the build > issue since libegl wasn't selected. > Indeed, there is no option --disable-egl in libepoxy, and libegl is mandatory > for Linux target. Vincente, libepoxy use dlsym to load a GLES2 library when EGL support is enabled, see src/dispatch_common.c #define EGL_LIB "libEGL.so.1" #define GLES1_LIB "libGLESv1_CM.so.1" #define GLES2_LIB "libGLESv2.so.2" So, OpenGL ES should be selected in the end. Best regards, Romain > > Did you check the libepoxy reverse dependencies ? > It seems we need to forward libegl dependency to libgtk3 package. > > With that fixed: > Reviewed-by: Romain Naour <romain.naour@gmail.com> > Tested-by: Romain Naour <romain.naour@gmail.com> > > Best regards, > Romain > >> >> Vincent >> >>> Thomas >>> >> _______________________________________________ >> buildroot mailing list >> buildroot@busybox.net >> http://lists.busybox.net/mailman/listinfo/buildroot >> >
diff --git a/package/libepoxy/Config.in b/package/libepoxy/Config.in index c87366a..54b8272 100644 --- a/package/libepoxy/Config.in +++ b/package/libepoxy/Config.in @@ -1,12 +1,12 @@ config BR2_PACKAGE_LIBEPOXY bool "libepoxy" select BR2_PACKAGE_XUTIL_UTIL_MACROS - depends on BR2_PACKAGE_HAS_LIBEGL || BR2_PACKAGE_HAS_LIBGL + depends on BR2_PACKAGE_HAS_LIBEGL help Epoxy is a library for handling OpenGL function pointer management for you. https://github.com/anholt/libepoxy -comment "libepoxy needs an OpenGL and/or OpenGL EGL backend" - depends on !BR2_PACKAGE_HAS_LIBEGL && !BR2_PACKAGE_HAS_LIBGL +comment "libepoxy needs an OpenGL EGL backend" + depends on !BR2_PACKAGE_HAS_LIBEGL diff --git a/package/libepoxy/libepoxy.mk b/package/libepoxy/libepoxy.mk index be8c55e..0f5d802 100644 --- a/package/libepoxy/libepoxy.mk +++ b/package/libepoxy/libepoxy.mk @@ -9,17 +9,10 @@ LIBEPOXY_VERSION = $(LIBEPOXY_VERSION_MAJOR).1 LIBEPOXY_SITE = http://ftp.gnome.org/pub/gnome/sources/libepoxy/$(LIBEPOXY_VERSION_MAJOR) LIBEPOXY_SOURCE = libepoxy-$(LIBEPOXY_VERSION).tar.xz LIBEPOXY_INSTALL_STAGING = YES -LIBEPOXY_DEPENDENCIES = host-pkgconf xutil_util-macros +LIBEPOXY_DEPENDENCIES = host-pkgconf libegl xutil_util-macros LIBEPOXY_LICENSE = MIT LIBEPOXY_LICENSE_FILES = COPYING -ifeq ($(BR2_PACKAGE_HAS_LIBEGL),y) -LIBEPOXY_CONF_OPTS += --enable-egl -LIBEPOXY_DEPENDENCIES += libegl -else -LIBEPOXY_CONF_OPTS += --disable-egl -endif - ifeq ($(BR2_PACKAGE_HAS_LIBGL)$(BR2_PACKAGE_XLIB_LIBX11),yy) LIBEPOXY_CONF_OPTS += --enable-glx LIBEPOXY_DEPENDENCIES += libgl xlib_libX11
The --disable-egl configure option doesn't exist: configure: WARNING: unrecognized options: [snip] --disable-egl If you don't have EGL support the configure script will fail like this: checking for EGL... no configure: error: Package requirements (egl) were not met: Fixes: http://autobuild.buildroot.net/results/3eca5ba26a521f6cc5a611309ba066472af7769c http://autobuild.buildroot.net/results/cf9ec7da196d70548ae1413e4a3730314f6434d6 http://autobuild.buildroot.net/results/069b80101afc4719db6d6d41cf5fc923be21ddc0 Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com> --- package/libepoxy/Config.in | 6 +++--- package/libepoxy/libepoxy.mk | 9 +-------- 2 files changed, 4 insertions(+), 11 deletions(-)