diff mbox

[v7,2/2] mtd: nand: Add support for Arasan NAND Flash Controller

Message ID 1483930734-10309-2-git-send-email-punnaia@xilinx.com
State Superseded
Delegated to: Boris Brezillon
Headers show

Commit Message

Punnaiah Choudary Kalluri Jan. 9, 2017, 2:58 a.m. UTC 
Added the basic driver for Arasan NAND Flash Controller used in
Zynq UltraScale+ MPSoC. It supports only Hw ECC and upto 24bit
correction.

Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
---
Changes in v7:
- Implemented Marek suggestions and comments
- Corrected the acronyms those should be in caps
- Modified kconfig/Make file to keep arasan entry in sorted order
- Added is_vmlloc_addr check
- Used ioread/write32_rep variants to avoid compilation error for intel
  platforms
- separated PIO and DMA mode read/write functions
- Minor cleanup
Chnages in v6:
- Addressed most of the Brian and Boris comments
- Separated the nandchip from the nand controller
- Removed the ecc lookup table from driver
- Now use framework nand waitfunction and readoob
- Fixed the compiler warning
- Adapted the new frameowrk changes related to ecc and ooblayout
- Disabled the clocks after the nand_reelase
- Now using only one completion object
- Boris suggessions like adapting cmd_ctrl and rework on read/write byte
  are not implemented and i will patch them later
- Also check_erased_ecc_chunk for erase and check for is_vmalloc_addr will
  implement later once the basic driver is mainlined.
Changes in v5:
- Renamed the driver filei as arasan_nand.c
- Fixed all comments relaqted coding style
- Fixed comments related to propagating the errors
- Modified the anfc_write_page_hwecc as per the write_page
  prototype
Changes in v4:
- Added support for onfi timing mode configuration
- Added clock supppport
- Added support for multiple chipselects
Changes in v3:
- Removed unused variables
- Avoided busy loop and used jifies based implementation
- Fixed compiler warnings "right shift count >= width of type"
- Removed unneeded codei and improved error reporting
- Added onfi version check to ensure reading the valid address cycles
Changes in v2:
- Added missing of.h to avoid kbuild system report erro
---
 drivers/mtd/nand/Kconfig       |   8 +
 drivers/mtd/nand/Makefile      |   1 +
 drivers/mtd/nand/arasan_nand.c | 932 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 941 insertions(+)
 create mode 100644 drivers/mtd/nand/arasan_nand.c

Comments

Boris Brezillon Feb. 19, 2017, 10:26 a.m. UTC | #1 
Hi Punnaiah,

Sorry for the late reply.

On Mon, 9 Jan 2017 08:28:54 +0530
Punnaiah Choudary Kalluri <punnaiah.choudary.kalluri@xilinx.com> wrote:

> Added the basic driver for Arasan NAND Flash Controller used in
> Zynq UltraScale+ MPSoC. It supports only Hw ECC and upto 24bit
> correction.
> 
> Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
> ---
> Changes in v7:
> - Implemented Marek suggestions and comments
> - Corrected the acronyms those should be in caps
> - Modified kconfig/Make file to keep arasan entry in sorted order
> - Added is_vmlloc_addr check
> - Used ioread/write32_rep variants to avoid compilation error for intel
>   platforms
> - separated PIO and DMA mode read/write functions
> - Minor cleanup
> Chnages in v6:
> - Addressed most of the Brian and Boris comments
> - Separated the nandchip from the nand controller
> - Removed the ecc lookup table from driver
> - Now use framework nand waitfunction and readoob
> - Fixed the compiler warning
> - Adapted the new frameowrk changes related to ecc and ooblayout
> - Disabled the clocks after the nand_reelase
> - Now using only one completion object
> - Boris suggessions like adapting cmd_ctrl and rework on read/write byte
>   are not implemented and i will patch them later
> - Also check_erased_ecc_chunk for erase and check for is_vmalloc_addr will
>   implement later once the basic driver is mainlined.
> Changes in v5:
> - Renamed the driver filei as arasan_nand.c
> - Fixed all comments relaqted coding style
> - Fixed comments related to propagating the errors
> - Modified the anfc_write_page_hwecc as per the write_page
>   prototype
> Changes in v4:
> - Added support for onfi timing mode configuration
> - Added clock supppport
> - Added support for multiple chipselects
> Changes in v3:
> - Removed unused variables
> - Avoided busy loop and used jifies based implementation
> - Fixed compiler warnings "right shift count >= width of type"
> - Removed unneeded codei and improved error reporting
> - Added onfi version check to ensure reading the valid address cycles
> Changes in v2:
> - Added missing of.h to avoid kbuild system report erro
> ---
>  drivers/mtd/nand/Kconfig       |   8 +
>  drivers/mtd/nand/Makefile      |   1 +
>  drivers/mtd/nand/arasan_nand.c | 932 +++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 941 insertions(+)
>  create mode 100644 drivers/mtd/nand/arasan_nand.c

checkpatch.pl --strict reports a few coding style problems. Can you fix
them?

[...]

> +#define PROG_PGRD			BIT(0)
> +#define PROG_ERASE			BIT(2)
> +#define PROG_STATUS			BIT(3)
> +#define PROG_PGPROG			BIT(4)
> +#define PROG_RDID			BIT(6)
> +#define PROG_RDPARAM			BIT(7)
> +#define PROG_RST			BIT(8)
> +#define PROG_GET_FEATURE		BIT(9)
> +#define PROG_SET_FEATURE		BIT(10)

I know I'm being insistent on this, but I don't understand what these
different prog modes are meant for. You still have to set the NAND
command and address cycles, so it probably has to do with timing
sequences, but that's not clearly described in the doc you pointed.

[...]

> +static void anfc_rw_buf_dma(struct mtd_info *mtd, uint8_t *buf, int len,
> +			    int operation, u32 prog)
> +{
> +	dma_addr_t paddr;
> +	struct nand_chip *chip = mtd_to_nand(mtd);
> +	struct anfc *nfc = to_anfc(chip->controller);
> +	struct anfc_nand_chip *achip = to_anfc_nand(chip);
> +	u32 eccintr = 0, dir;
> +	u32 pktsize = len, pktcount = 1;
> +
> +	if ((nfc->curr_cmd == NAND_CMD_READ0) ||
> +		((nfc->curr_cmd == NAND_CMD_SEQIN) && !nfc->iswriteoob)) {
> +		pktsize = achip->pktsize;
> +		pktcount = DIV_ROUND_UP(mtd->writesize, pktsize);
> +	}

I really don't like what's done here (the fact that you test
->curr_cmd in something that is supposed to be command agnostic). Maybe
you should just avoid using ->write_buf() when programming a page, and
have a custom function doing that.

Let's try to keep ->read/write_buf() as generic as possible.

> +	anfc_setpktszcnt(nfc, pktsize, pktcount);
> +
> +	if (!achip->bch && (nfc->curr_cmd == NAND_CMD_READ0))
> +		eccintr = MBIT_ERROR;

Ditto.

> +
> +	if (operation)
> +		dir = DMA_FROM_DEVICE;
> +	else
> +		dir = DMA_TO_DEVICE;
> +
> +	paddr = dma_map_single(nfc->dev, buf, len, dir);
> +	if (dma_mapping_error(nfc->dev, paddr)) {
> +		dev_err(nfc->dev, "Read buffer mapping error");
> +		return;
> +	}
> +	lo_hi_writeq(paddr, nfc->base + DMA_ADDR0_OFST);
> +	anfc_enable_intrs(nfc, (XFER_COMPLETE | eccintr));
> +	writel(prog, nfc->base + PROG_OFST);
> +	anfc_wait_for_event(nfc);
> +	dma_unmap_single(nfc->dev, paddr, len, dir);
> +}
> +
> +static void anfc_rw_buf_pio(struct mtd_info *mtd, uint8_t *buf, int len,
> +			    int operation, int prog)
> +{
> +	struct nand_chip *chip = mtd_to_nand(mtd);
> +	struct anfc *nfc = to_anfc(chip->controller);
> +	struct anfc_nand_chip *achip = to_anfc_nand(chip);
> +	u32 *bufptr = (u32 *)buf;
> +	u32 cnt = 0, intr = 0;
> +	u32 pktsize = len, pktcount = 1;
> +
> +	anfc_config_dma(nfc, 0);
> +
> +	if ((nfc->curr_cmd == NAND_CMD_READ0) ||
> +		((nfc->curr_cmd == NAND_CMD_SEQIN) && !nfc->iswriteoob)) {
> +		pktsize = achip->pktsize;
> +		pktcount = DIV_ROUND_UP(mtd->writesize, pktsize);
> +	}

Ditto.

> +	anfc_setpktszcnt(nfc, pktsize, pktcount);
> +
> +	if (!achip->bch && (nfc->curr_cmd == NAND_CMD_READ0))
> +		intr = MBIT_ERROR;
> +
> +	if (operation)
> +		intr |= READ_READY;
> +	else
> +		intr |= WRITE_READY;
> +
> +	anfc_enable_intrs(nfc, intr);
> +	writel(prog, nfc->base + PROG_OFST);
> +
> +	while (cnt < pktcount) {
> +		anfc_wait_for_event(nfc);
> +		cnt++;
> +		if (cnt == pktcount)
> +			anfc_enable_intrs(nfc, XFER_COMPLETE);
> +		if (operation)
> +			ioread32_rep(nfc->base + DATA_PORT_OFST, bufptr,
> +				     pktsize/4);
> +		else
> +			iowrite32_rep(nfc->base + DATA_PORT_OFST, bufptr,
> +				      pktsize/4);
> +		bufptr += (pktsize / 4);
> +		if (cnt < pktcount)
> +			anfc_enable_intrs(nfc, intr);
> +	}
> +
> +	anfc_wait_for_event(nfc);
> +}
> +
> +static void anfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
> +{
> +	struct nand_chip *chip = mtd_to_nand(mtd);
> +	struct anfc *nfc = to_anfc(chip->controller);
> +
> +	if (nfc->dma && !is_vmalloc_addr(buf))

			^ virt_addr_valid(buf) ?

> +		anfc_rw_buf_dma(mtd, buf, len, 1, PROG_PGRD);
> +	else
> +		anfc_rw_buf_pio(mtd, buf, len, 1, PROG_PGRD);
> +}
> +
> +static void anfc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
> +{
> +	struct nand_chip *chip = mtd_to_nand(mtd);
> +	struct anfc *nfc = to_anfc(chip->controller);
> +
> +	if (nfc->dma && !is_vmalloc_addr(buf))
> +		anfc_rw_buf_dma(mtd, (char *)buf, len, 0, PROG_PGPROG);
> +	else
> +		anfc_rw_buf_pio(mtd, (char *)buf, len, 0, PROG_PGPROG);
> +}
> +
> +static int anfc_read_page_hwecc(struct mtd_info *mtd,
> +				struct nand_chip *chip, uint8_t *buf,
> +				int oob_required, int page)
> +{
> +	u32 val;
> +	struct anfc *nfc = to_anfc(chip->controller);
> +	struct anfc_nand_chip *achip = to_anfc_nand(chip);
> +
> +	anfc_set_eccsparecmd(nfc, achip, NAND_CMD_RNDOUT, NAND_CMD_RNDOUTSTART);
> +	anfc_config_ecc(nfc, 1);
> +
> +	val = readl(nfc->base + CMD_OFST);
> +	val = val | ECC_ENABLE;
> +	writel(val, nfc->base + CMD_OFST);

Hm, isn't it done in anfc_config_ecc()?

> +
> +	chip->read_buf(mtd, buf, mtd->writesize);
> +
> +	val = readl(nfc->base + ECC_ERR_CNT_OFST);
> +	if (achip->bch) {
> +		mtd->ecc_stats.corrected += val & PAGE_ERR_CNT_MASK;
> +	} else {
> +		val = readl(nfc->base + ECC_ERR_CNT_1BIT_OFST);
> +		mtd->ecc_stats.corrected += val;
> +		val = readl(nfc->base + ECC_ERR_CNT_2BIT_OFST);
> +		mtd->ecc_stats.failed += val;
> +		/* Clear ecc error count register 1Bit, 2Bit */
> +		writel(0x0, nfc->base + ECC_ERR_CNT_1BIT_OFST);
> +		writel(0x0, nfc->base + ECC_ERR_CNT_2BIT_OFST);
> +	}
> +
> +	if (oob_required)
> +		chip->ecc.read_oob(mtd, chip, page);
> +

Shouldn't you disable the ECC engine here (anfc_config_ecc(nfc, 0))?

> +	return 0;
> +}
> +
> +static int anfc_write_page_hwecc(struct mtd_info *mtd,
> +				 struct nand_chip *chip, const uint8_t *buf,
> +				 int oob_required, int page)
> +{
> +	int ret;
> +	struct anfc *nfc = to_anfc(chip->controller);
> +	struct anfc_nand_chip *achip = to_anfc_nand(chip);
> +	uint8_t *ecc_calc = chip->buffers->ecccalc;
> +
> +	anfc_set_eccsparecmd(nfc, achip, NAND_CMD_RNDIN, 0);
> +	anfc_config_ecc(nfc, 1);
> +
> +	chip->write_buf(mtd, buf, mtd->writesize);
> +
> +	if (oob_required) {
> +		chip->waitfunc(mtd, chip);
> +		chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
> +		chip->read_buf(mtd, ecc_calc, mtd->oobsize);
> +		ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi,
> +						 0, chip->ecc.total);
> +		if (ret)
> +			return ret;
> +		chip->ecc.write_oob(mtd, chip, page);
> +	}

Ditto:

	anfc_config_ecc(nfc, 0);


> +
> +	return 0;
> +}
> +
> +static u8 anfc_read_byte(struct mtd_info *mtd)
> +{
> +	struct nand_chip *chip = mtd_to_nand(mtd);
> +	struct anfc *nfc = to_anfc(chip->controller);
> +
> +	return nfc->buf[nfc->bufshift++];

I'm still not happy with this intermediate buffer. Can't you just call
anfc_read_buf() with len = 1 ?

> +}

[...]

> +
> +static void anfc_cmd_function(struct mtd_info *mtd,
> +			      unsigned int cmd, int column, int page_addr)
> +{
> +	struct nand_chip *chip = mtd_to_nand(mtd);
> +	struct anfc_nand_chip *achip = to_anfc_nand(chip);
> +	struct anfc *nfc = to_anfc(chip->controller);
> +	bool wait = false, read = false;
> +	u32 addrcycles, prog;
> +	u32 *bufptr = (u32 *)nfc->buf;
> +
> +	nfc->bufshift = 0;
> +	nfc->curr_cmd = cmd;
> +
> +	if (page_addr == -1)
> +		page_addr = 0;
> +	if (column == -1)
> +		column = 0;
> +
> +	switch (cmd) {
> +	case NAND_CMD_RESET:
> +		anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 0);
> +		prog = PROG_RST;
> +		wait = true;
> +		break;
> +	case NAND_CMD_SEQIN:
> +		addrcycles = achip->raddr_cycles + achip->caddr_cycles;
> +		anfc_prepare_cmd(nfc, cmd, NAND_CMD_PAGEPROG, 1,
> +				 mtd->writesize, addrcycles);
> +		anfc_setpagecoladdr(nfc, page_addr, column);
> +		break;
> +	case NAND_CMD_READOOB:
> +		column += mtd->writesize;
> +	case NAND_CMD_READ0:
> +	case NAND_CMD_READ1:
> +		addrcycles = achip->raddr_cycles + achip->caddr_cycles;
> +		anfc_prepare_cmd(nfc, NAND_CMD_READ0, NAND_CMD_READSTART, 1,
> +				 mtd->writesize, addrcycles);
> +		anfc_setpagecoladdr(nfc, page_addr, column);
> +		break;
> +	case NAND_CMD_RNDOUT:
> +		anfc_prepare_cmd(nfc, cmd, NAND_CMD_RNDOUTSTART, 1,
> +				 mtd->writesize, 2);
> +		anfc_setpagecoladdr(nfc, page_addr, column);
> +		break;
> +	case NAND_CMD_PARAM:
> +		anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 1);
> +		anfc_setpagecoladdr(nfc, page_addr, column);
> +		anfc_rw_buf_pio(mtd, nfc->buf,
> +				(4 * sizeof(struct nand_onfi_params)),
> +				1, PROG_RDPARAM);
> +		break;
> +	case NAND_CMD_READID:
> +		anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 1);
> +		anfc_setpagecoladdr(nfc, page_addr, column);
> +		anfc_rw_buf_pio(mtd, nfc->buf, ONFI_ID_LEN, 1, PROG_RDID);
> +		break;
> +	case NAND_CMD_ERASE1:
> +		addrcycles = achip->raddr_cycles;
> +		prog = PROG_ERASE;
> +		anfc_prepare_cmd(nfc, cmd, NAND_CMD_ERASE2, 0, 0, addrcycles);
> +		column = page_addr & 0xffff;
> +		page_addr = (page_addr >> PG_ADDR_SHIFT) & 0xffff;
> +		anfc_setpagecoladdr(nfc, page_addr, column);
> +		wait = true;
> +		break;
> +	case NAND_CMD_STATUS:
> +		anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 0);
> +		anfc_setpktszcnt(nfc, achip->spktsize/4, 1);
> +		anfc_setpagecoladdr(nfc, page_addr, column);
> +		prog = PROG_STATUS;
> +		wait = read = true;
> +		break;
> +	case NAND_CMD_GET_FEATURES:
> +		anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 1);
> +		anfc_setpagecoladdr(nfc, page_addr, column);
> +		anfc_rw_buf_pio(mtd, nfc->buf, achip->spktsize, 1,
> +				PROG_GET_FEATURE);

As already mentioned above, I don't understand why do you sometime do
the data xfer (READID, CMDPARAM, GET/SET_FEATURES) in ->cmdfunc()
instead of ->read/write_byte/buf()?

> +		break;
> +	case NAND_CMD_SET_FEATURES:
> +		anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 1);
> +		anfc_setpagecoladdr(nfc, page_addr, column);
> +		break;
> +	default:

Please put a dev/pr_warn() here.

> +		return;
> +	}
> +
> +	if (wait) {
> +		anfc_enable_intrs(nfc, XFER_COMPLETE);
> +		writel(prog, nfc->base + PROG_OFST);
> +		anfc_wait_for_event(nfc);
> +	}
> +
> +	if (read)
> +		bufptr[0] = readl(nfc->base + FLASH_STS_OFST);

Hm, I'm pretty sure that won't always work. The core sometime send
the NAND_CMD_STATUS once and then polls the status by calling
->read_byte() several times. Here, you're only storing the status byte
when the command is sent.
This tend to confirm my previous statement: doing I/Os in ->cmdfunc()
is a bad idea.

> +}
> +

[...]

> +
> +static int anfc_init_timing_mode(struct anfc *nfc,
> +				 struct anfc_nand_chip *achip)
> +{
> +	int mode, err;
> +	unsigned int feature[2];
> +	u32 inftimeval;
> +	struct nand_chip *chip = &achip->chip;
> +	struct mtd_info *mtd = nand_to_mtd(chip);
> +
> +	memset(feature, 0, NVDDR_MODE_PACKET_SIZE);
> +	/* Get nvddr timing modes */
> +	mode = onfi_get_sync_timing_mode(chip) & 0xff;
> +	if (!mode) {
> +		mode = fls(onfi_get_async_timing_mode(chip)) - 1;
> +		inftimeval = mode;
> +	} else {
> +		mode = fls(mode) - 1;
> +		inftimeval = NVDDR_MODE | (mode << NVDDR_TIMING_MODE_SHIFT);
> +		mode |= ONFI_DATA_INTERFACE_NVDDR;
> +	}
> +
> +	feature[0] = mode;
> +	chip->select_chip(mtd, achip->csnum);
> +	err = chip->onfi_set_features(mtd, chip, ONFI_FEATURE_ADDR_TIMING_MODE,
> +				      (uint8_t *)feature);
> +	chip->select_chip(mtd, -1);
> +	if (err)
> +		return err;
> +
> +	achip->inftimeval = inftimeval;
> +
> +	if (mode & ONFI_DATA_INTERFACE_NVDDR)
> +		achip->spktsize = NVDDR_MODE_PACKET_SIZE;
> +
> +	return 0;
> +}

The ->setup_data_interface() hook has been added in 4.9. Can you
enhance the core to support DDR interfaces?

Regards,

Boris
punnaiah choudary kalluri Feb. 25, 2017, 3:06 a.m. UTC | #2 
Hi Boris,

  Thanks for the review

On Sun, Feb 19, 2017 at 3:56 PM, Boris Brezillon
<boris.brezillon@free-electrons.com> wrote:
> Hi Punnaiah,
>
> Sorry for the late reply.
>
> On Mon, 9 Jan 2017 08:28:54 +0530
> Punnaiah Choudary Kalluri <punnaiah.choudary.kalluri@xilinx.com> wrote:
>
>> Added the basic driver for Arasan NAND Flash Controller used in
>> Zynq UltraScale+ MPSoC. It supports only Hw ECC and upto 24bit
>> correction.
>>
>> Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
>> ---
>> Changes in v7:
>> - Implemented Marek suggestions and comments
>> - Corrected the acronyms those should be in caps
>> - Modified kconfig/Make file to keep arasan entry in sorted order
>> - Added is_vmlloc_addr check
>> - Used ioread/write32_rep variants to avoid compilation error for intel
>>   platforms
>> - separated PIO and DMA mode read/write functions
>> - Minor cleanup
>> Chnages in v6:
>> - Addressed most of the Brian and Boris comments
>> - Separated the nandchip from the nand controller
>> - Removed the ecc lookup table from driver
>> - Now use framework nand waitfunction and readoob
>> - Fixed the compiler warning
>> - Adapted the new frameowrk changes related to ecc and ooblayout
>> - Disabled the clocks after the nand_reelase
>> - Now using only one completion object
>> - Boris suggessions like adapting cmd_ctrl and rework on read/write byte
>>   are not implemented and i will patch them later
>> - Also check_erased_ecc_chunk for erase and check for is_vmalloc_addr will
>>   implement later once the basic driver is mainlined.
>> Changes in v5:
>> - Renamed the driver filei as arasan_nand.c
>> - Fixed all comments relaqted coding style
>> - Fixed comments related to propagating the errors
>> - Modified the anfc_write_page_hwecc as per the write_page
>>   prototype
>> Changes in v4:
>> - Added support for onfi timing mode configuration
>> - Added clock supppport
>> - Added support for multiple chipselects
>> Changes in v3:
>> - Removed unused variables
>> - Avoided busy loop and used jifies based implementation
>> - Fixed compiler warnings "right shift count >= width of type"
>> - Removed unneeded codei and improved error reporting
>> - Added onfi version check to ensure reading the valid address cycles
>> Changes in v2:
>> - Added missing of.h to avoid kbuild system report erro
>> ---
>>  drivers/mtd/nand/Kconfig       |   8 +
>>  drivers/mtd/nand/Makefile      |   1 +
>>  drivers/mtd/nand/arasan_nand.c | 932 +++++++++++++++++++++++++++++++++++++++++
>>  3 files changed, 941 insertions(+)
>>  create mode 100644 drivers/mtd/nand/arasan_nand.c
>
> checkpatch.pl --strict reports a few coding style problems. Can you fix
> them?
>

Ok.

> [...]
>
>> +#define PROG_PGRD                    BIT(0)
>> +#define PROG_ERASE                   BIT(2)
>> +#define PROG_STATUS                  BIT(3)
>> +#define PROG_PGPROG                  BIT(4)
>> +#define PROG_RDID                    BIT(6)
>> +#define PROG_RDPARAM                 BIT(7)
>> +#define PROG_RST                     BIT(8)
>> +#define PROG_GET_FEATURE             BIT(9)
>> +#define PROG_SET_FEATURE             BIT(10)
>
> I know I'm being insistent on this, but I don't understand what these
> different prog modes are meant for. You still have to set the NAND
> command and address cycles, so it probably has to do with timing
> sequences, but that's not clearly described in the doc you pointed.
>

As per the spec, deepening on the operation to be perform,
the corresponding program bit need to be set. After this step, the controller
will initiate the cmd and data phase sequence.But even i am not sure why
we need to program though the required parameters are already configured
probably the controller internal state machine might need this information.


> [...]
>
>> +static void anfc_rw_buf_dma(struct mtd_info *mtd, uint8_t *buf, int len,
>> +                         int operation, u32 prog)
>> +{
>> +     dma_addr_t paddr;
>> +     struct nand_chip *chip = mtd_to_nand(mtd);
>> +     struct anfc *nfc = to_anfc(chip->controller);
>> +     struct anfc_nand_chip *achip = to_anfc_nand(chip);
>> +     u32 eccintr = 0, dir;
>> +     u32 pktsize = len, pktcount = 1;
>> +
>> +     if ((nfc->curr_cmd == NAND_CMD_READ0) ||
>> +             ((nfc->curr_cmd == NAND_CMD_SEQIN) && !nfc->iswriteoob)) {
>> +             pktsize = achip->pktsize;
>> +             pktcount = DIV_ROUND_UP(mtd->writesize, pktsize);
>> +     }
>
> I really don't like what's done here (the fact that you test
> ->curr_cmd in something that is supposed to be command agnostic). Maybe
> you should just avoid using ->write_buf() when programming a page, and
> have a custom function doing that.
>

Since we are overriding the write_buf/read_buf function because of the reason it
requires custom implementation. Also if we see nand transactions it
always follow the
COMMAND and DATA phase sequence. so, i didn't see any thing harm if
you keep track
of the command while reading the data in DATA phase. Please suggest.

> Let's try to keep ->read/write_buf() as generic as possible.
>
>> +     anfc_setpktszcnt(nfc, pktsize, pktcount);
>> +
>> +     if (!achip->bch && (nfc->curr_cmd == NAND_CMD_READ0))
>> +             eccintr = MBIT_ERROR;
>
> Ditto.
>
>> +
>> +     if (operation)
>> +             dir = DMA_FROM_DEVICE;
>> +     else
>> +             dir = DMA_TO_DEVICE;
>> +
>> +     paddr = dma_map_single(nfc->dev, buf, len, dir);
>> +     if (dma_mapping_error(nfc->dev, paddr)) {
>> +             dev_err(nfc->dev, "Read buffer mapping error");
>> +             return;
>> +     }
>> +     lo_hi_writeq(paddr, nfc->base + DMA_ADDR0_OFST);
>> +     anfc_enable_intrs(nfc, (XFER_COMPLETE | eccintr));
>> +     writel(prog, nfc->base + PROG_OFST);
>> +     anfc_wait_for_event(nfc);
>> +     dma_unmap_single(nfc->dev, paddr, len, dir);
>> +}
>> +
>> +static void anfc_rw_buf_pio(struct mtd_info *mtd, uint8_t *buf, int len,
>> +                         int operation, int prog)
>> +{
>> +     struct nand_chip *chip = mtd_to_nand(mtd);
>> +     struct anfc *nfc = to_anfc(chip->controller);
>> +     struct anfc_nand_chip *achip = to_anfc_nand(chip);
>> +     u32 *bufptr = (u32 *)buf;
>> +     u32 cnt = 0, intr = 0;
>> +     u32 pktsize = len, pktcount = 1;
>> +
>> +     anfc_config_dma(nfc, 0);
>> +
>> +     if ((nfc->curr_cmd == NAND_CMD_READ0) ||
>> +             ((nfc->curr_cmd == NAND_CMD_SEQIN) && !nfc->iswriteoob)) {
>> +             pktsize = achip->pktsize;
>> +             pktcount = DIV_ROUND_UP(mtd->writesize, pktsize);
>> +     }
>
> Ditto.
>
>> +     anfc_setpktszcnt(nfc, pktsize, pktcount);
>> +
>> +     if (!achip->bch && (nfc->curr_cmd == NAND_CMD_READ0))
>> +             intr = MBIT_ERROR;
>> +
>> +     if (operation)
>> +             intr |= READ_READY;
>> +     else
>> +             intr |= WRITE_READY;
>> +
>> +     anfc_enable_intrs(nfc, intr);
>> +     writel(prog, nfc->base + PROG_OFST);
>> +
>> +     while (cnt < pktcount) {
>> +             anfc_wait_for_event(nfc);
>> +             cnt++;
>> +             if (cnt == pktcount)
>> +                     anfc_enable_intrs(nfc, XFER_COMPLETE);
>> +             if (operation)
>> +                     ioread32_rep(nfc->base + DATA_PORT_OFST, bufptr,
>> +                                  pktsize/4);
>> +             else
>> +                     iowrite32_rep(nfc->base + DATA_PORT_OFST, bufptr,
>> +                                   pktsize/4);
>> +             bufptr += (pktsize / 4);
>> +             if (cnt < pktcount)
>> +                     anfc_enable_intrs(nfc, intr);
>> +     }
>> +
>> +     anfc_wait_for_event(nfc);
>> +}
>> +
>> +static void anfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
>> +{
>> +     struct nand_chip *chip = mtd_to_nand(mtd);
>> +     struct anfc *nfc = to_anfc(chip->controller);
>> +
>> +     if (nfc->dma && !is_vmalloc_addr(buf))
>
>                         ^ virt_addr_valid(buf) ?
>
>> +             anfc_rw_buf_dma(mtd, buf, len, 1, PROG_PGRD);
>> +     else
>> +             anfc_rw_buf_pio(mtd, buf, len, 1, PROG_PGRD);
>> +}
>> +
>> +static void anfc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
>> +{
>> +     struct nand_chip *chip = mtd_to_nand(mtd);
>> +     struct anfc *nfc = to_anfc(chip->controller);
>> +
>> +     if (nfc->dma && !is_vmalloc_addr(buf))
>> +             anfc_rw_buf_dma(mtd, (char *)buf, len, 0, PROG_PGPROG);
>> +     else
>> +             anfc_rw_buf_pio(mtd, (char *)buf, len, 0, PROG_PGPROG);
>> +}
>> +
>> +static int anfc_read_page_hwecc(struct mtd_info *mtd,
>> +                             struct nand_chip *chip, uint8_t *buf,
>> +                             int oob_required, int page)
>> +{
>> +     u32 val;
>> +     struct anfc *nfc = to_anfc(chip->controller);
>> +     struct anfc_nand_chip *achip = to_anfc_nand(chip);
>> +
>> +     anfc_set_eccsparecmd(nfc, achip, NAND_CMD_RNDOUT, NAND_CMD_RNDOUTSTART);
>> +     anfc_config_ecc(nfc, 1);
>> +
>> +     val = readl(nfc->base + CMD_OFST);
>> +     val = val | ECC_ENABLE;
>> +     writel(val, nfc->base + CMD_OFST);
>
> Hm, isn't it done in anfc_config_ecc()?
>

oops. sorry missed it.

>> +
>> +     chip->read_buf(mtd, buf, mtd->writesize);
>> +
>> +     val = readl(nfc->base + ECC_ERR_CNT_OFST);
>> +     if (achip->bch) {
>> +             mtd->ecc_stats.corrected += val & PAGE_ERR_CNT_MASK;
>> +     } else {
>> +             val = readl(nfc->base + ECC_ERR_CNT_1BIT_OFST);
>> +             mtd->ecc_stats.corrected += val;
>> +             val = readl(nfc->base + ECC_ERR_CNT_2BIT_OFST);
>> +             mtd->ecc_stats.failed += val;
>> +             /* Clear ecc error count register 1Bit, 2Bit */
>> +             writel(0x0, nfc->base + ECC_ERR_CNT_1BIT_OFST);
>> +             writel(0x0, nfc->base + ECC_ERR_CNT_2BIT_OFST);
>> +     }
>> +
>> +     if (oob_required)
>> +             chip->ecc.read_oob(mtd, chip, page);
>> +
>
> Shouldn't you disable the ECC engine here (anfc_config_ecc(nfc, 0))?
>

Not required really, while forming the new command this will be cleared and
it can be enabled only when there is a need.
But for uniformity i will include the suggested change.

>> +     return 0;
>> +}
>> +
>> +static int anfc_write_page_hwecc(struct mtd_info *mtd,
>> +                              struct nand_chip *chip, const uint8_t *buf,
>> +                              int oob_required, int page)
>> +{
>> +     int ret;
>> +     struct anfc *nfc = to_anfc(chip->controller);
>> +     struct anfc_nand_chip *achip = to_anfc_nand(chip);
>> +     uint8_t *ecc_calc = chip->buffers->ecccalc;
>> +
>> +     anfc_set_eccsparecmd(nfc, achip, NAND_CMD_RNDIN, 0);
>> +     anfc_config_ecc(nfc, 1);
>> +
>> +     chip->write_buf(mtd, buf, mtd->writesize);
>> +
>> +     if (oob_required) {
>> +             chip->waitfunc(mtd, chip);
>> +             chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
>> +             chip->read_buf(mtd, ecc_calc, mtd->oobsize);
>> +             ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi,
>> +                                              0, chip->ecc.total);
>> +             if (ret)
>> +                     return ret;
>> +             chip->ecc.write_oob(mtd, chip, page);
>> +     }
>
> Ditto:
>
>         anfc_config_ecc(nfc, 0);
>
>
>> +
>> +     return 0;
>> +}
>> +
>> +static u8 anfc_read_byte(struct mtd_info *mtd)
>> +{
>> +     struct nand_chip *chip = mtd_to_nand(mtd);
>> +     struct anfc *nfc = to_anfc(chip->controller);
>> +
>> +     return nfc->buf[nfc->bufshift++];
>
> I'm still not happy with this intermediate buffer. Can't you just call
> anfc_read_buf() with len = 1 ?
>

As i said previously, the controller will read 4 bytes at a time. So,
for read byte
case, driver need to return the current byte and keep track of other bytes for
next read_byte call. this case is same even for read_buf with len=1


>> +}
>
> [...]
>
>> +
>> +static void anfc_cmd_function(struct mtd_info *mtd,
>> +                           unsigned int cmd, int column, int page_addr)
>> +{
>> +     struct nand_chip *chip = mtd_to_nand(mtd);
>> +     struct anfc_nand_chip *achip = to_anfc_nand(chip);
>> +     struct anfc *nfc = to_anfc(chip->controller);
>> +     bool wait = false, read = false;
>> +     u32 addrcycles, prog;
>> +     u32 *bufptr = (u32 *)nfc->buf;
>> +
>> +     nfc->bufshift = 0;
>> +     nfc->curr_cmd = cmd;
>> +
>> +     if (page_addr == -1)
>> +             page_addr = 0;
>> +     if (column == -1)
>> +             column = 0;
>> +
>> +     switch (cmd) {
>> +     case NAND_CMD_RESET:
>> +             anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 0);
>> +             prog = PROG_RST;
>> +             wait = true;
>> +             break;
>> +     case NAND_CMD_SEQIN:
>> +             addrcycles = achip->raddr_cycles + achip->caddr_cycles;
>> +             anfc_prepare_cmd(nfc, cmd, NAND_CMD_PAGEPROG, 1,
>> +                              mtd->writesize, addrcycles);
>> +             anfc_setpagecoladdr(nfc, page_addr, column);
>> +             break;
>> +     case NAND_CMD_READOOB:
>> +             column += mtd->writesize;
>> +     case NAND_CMD_READ0:
>> +     case NAND_CMD_READ1:
>> +             addrcycles = achip->raddr_cycles + achip->caddr_cycles;
>> +             anfc_prepare_cmd(nfc, NAND_CMD_READ0, NAND_CMD_READSTART, 1,
>> +                              mtd->writesize, addrcycles);
>> +             anfc_setpagecoladdr(nfc, page_addr, column);
>> +             break;
>> +     case NAND_CMD_RNDOUT:
>> +             anfc_prepare_cmd(nfc, cmd, NAND_CMD_RNDOUTSTART, 1,
>> +                              mtd->writesize, 2);
>> +             anfc_setpagecoladdr(nfc, page_addr, column);
>> +             break;
>> +     case NAND_CMD_PARAM:
>> +             anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 1);
>> +             anfc_setpagecoladdr(nfc, page_addr, column);
>> +             anfc_rw_buf_pio(mtd, nfc->buf,
>> +                             (4 * sizeof(struct nand_onfi_params)),
>> +                             1, PROG_RDPARAM);
>> +             break;
>> +     case NAND_CMD_READID:
>> +             anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 1);
>> +             anfc_setpagecoladdr(nfc, page_addr, column);
>> +             anfc_rw_buf_pio(mtd, nfc->buf, ONFI_ID_LEN, 1, PROG_RDID);
>> +             break;
>> +     case NAND_CMD_ERASE1:
>> +             addrcycles = achip->raddr_cycles;
>> +             prog = PROG_ERASE;
>> +             anfc_prepare_cmd(nfc, cmd, NAND_CMD_ERASE2, 0, 0, addrcycles);
>> +             column = page_addr & 0xffff;
>> +             page_addr = (page_addr >> PG_ADDR_SHIFT) & 0xffff;
>> +             anfc_setpagecoladdr(nfc, page_addr, column);
>> +             wait = true;
>> +             break;
>> +     case NAND_CMD_STATUS:
>> +             anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 0);
>> +             anfc_setpktszcnt(nfc, achip->spktsize/4, 1);
>> +             anfc_setpagecoladdr(nfc, page_addr, column);
>> +             prog = PROG_STATUS;
>> +             wait = read = true;
>> +             break;
>> +     case NAND_CMD_GET_FEATURES:
>> +             anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 1);
>> +             anfc_setpagecoladdr(nfc, page_addr, column);
>> +             anfc_rw_buf_pio(mtd, nfc->buf, achip->spktsize, 1,
>> +                             PROG_GET_FEATURE);
>
> As already mentioned above, I don't understand why do you sometime do
> the data xfer (READID, CMDPARAM, GET/SET_FEATURES) in ->cmdfunc()
> instead of ->read/write_byte/buf()?

Because for all these commands the framework expects data in bytes and it is
reading byte by byte using read_byte function. So, capturing the data to
intermediate buffer and the read_byte call will shift this buffer.
i have tried many options to avoid reading data in command function
but i couldn't
find the better way than the current.

>
>> +             break;
>> +     case NAND_CMD_SET_FEATURES:
>> +             anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 1);
>> +             anfc_setpagecoladdr(nfc, page_addr, column);
>> +             break;
>> +     default:
>
> Please put a dev/pr_warn() here.

Ok.

>
>> +             return;
>> +     }
>> +
>> +     if (wait) {
>> +             anfc_enable_intrs(nfc, XFER_COMPLETE);
>> +             writel(prog, nfc->base + PROG_OFST);
>> +             anfc_wait_for_event(nfc);
>> +     }
>> +
>> +     if (read)
>> +             bufptr[0] = readl(nfc->base + FLASH_STS_OFST);
>
> Hm, I'm pretty sure that won't always work. The core sometime send
> the NAND_CMD_STATUS once and then polls the status by calling
> ->read_byte() several times. Here, you're only storing the status byte
> when the command is sent.

This issue i have reproduced. so, now i need to keep track of command
and read it from read_byte

> This tend to confirm my previous statement: doing I/Os in ->cmdfunc()
> is a bad idea.
>
>> +}
>> +
>
> [...]
>
>> +
>> +static int anfc_init_timing_mode(struct anfc *nfc,
>> +                              struct anfc_nand_chip *achip)
>> +{
>> +     int mode, err;
>> +     unsigned int feature[2];
>> +     u32 inftimeval;
>> +     struct nand_chip *chip = &achip->chip;
>> +     struct mtd_info *mtd = nand_to_mtd(chip);
>> +
>> +     memset(feature, 0, NVDDR_MODE_PACKET_SIZE);
>> +     /* Get nvddr timing modes */
>> +     mode = onfi_get_sync_timing_mode(chip) & 0xff;
>> +     if (!mode) {
>> +             mode = fls(onfi_get_async_timing_mode(chip)) - 1;
>> +             inftimeval = mode;
>> +     } else {
>> +             mode = fls(mode) - 1;
>> +             inftimeval = NVDDR_MODE | (mode << NVDDR_TIMING_MODE_SHIFT);
>> +             mode |= ONFI_DATA_INTERFACE_NVDDR;
>> +     }
>> +
>> +     feature[0] = mode;
>> +     chip->select_chip(mtd, achip->csnum);
>> +     err = chip->onfi_set_features(mtd, chip, ONFI_FEATURE_ADDR_TIMING_MODE,
>> +                                   (uint8_t *)feature);
>> +     chip->select_chip(mtd, -1);
>> +     if (err)
>> +             return err;
>> +
>> +     achip->inftimeval = inftimeval;
>> +
>> +     if (mode & ONFI_DATA_INTERFACE_NVDDR)
>> +             achip->spktsize = NVDDR_MODE_PACKET_SIZE;
>> +
>> +     return 0;
>> +}
>
> The ->setup_data_interface() hook has been added in 4.9. Can you
> enhance the core to support DDR interfaces?
>

Sure


Thanks,
Punnaiah
> Regards,
>
> Boris
diff mbox

Patch

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 7b7a887..c4cfca2 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -41,6 +41,14 @@  config MTD_SM_COMMON
 	tristate
 	default n
 
+config MTD_NAND_ARASAN
+	tristate "Support for Arasan Nand Flash controller"
+	depends on HAS_IOMEM
+	depends on HAS_DMA
+	help
+	  Enables the driver for the Arasan NAND Flash controller on
+	  Zynq UltraScale+ MPSoC.
+
 config MTD_NAND_DENALI
 	tristate
 
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index cafde6f..7754170 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -8,6 +8,7 @@  obj-$(CONFIG_MTD_NAND_BCH)		+= nand_bch.o
 obj-$(CONFIG_MTD_NAND_IDS)		+= nand_ids.o
 obj-$(CONFIG_MTD_SM_COMMON) 		+= sm_common.o
 
+obj-$(CONFIG_MTD_NAND_ARASAN)		+= arasan_nand.o
 obj-$(CONFIG_MTD_NAND_CAFE)		+= cafe_nand.o
 obj-$(CONFIG_MTD_NAND_AMS_DELTA)	+= ams-delta.o
 obj-$(CONFIG_MTD_NAND_DENALI)		+= denali.o
diff --git a/drivers/mtd/nand/arasan_nand.c b/drivers/mtd/nand/arasan_nand.c
new file mode 100644
index 0000000..2103134
--- /dev/null
+++ b/drivers/mtd/nand/arasan_nand.c
@@ -0,0 +1,932 @@ 
+/*
+ * Arasan NAND Flash Controller Driver
+ *
+ * Copyright (C) 2014 - 2017 Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#define DRIVER_NAME			"arasan_nand"
+#define EVNT_TIMEOUT_MSEC		1000
+
+#define PKT_OFST			0x00
+#define MEM_ADDR1_OFST			0x04
+#define MEM_ADDR2_OFST			0x08
+#define CMD_OFST			0x0C
+#define PROG_OFST			0x10
+#define INTR_STS_EN_OFST		0x14
+#define INTR_SIG_EN_OFST		0x18
+#define INTR_STS_OFST			0x1C
+#define READY_STS_OFST			0x20
+#define DMA_ADDR1_OFST			0x24
+#define FLASH_STS_OFST			0x28
+#define DATA_PORT_OFST			0x30
+#define ECC_OFST			0x34
+#define ECC_ERR_CNT_OFST		0x38
+#define ECC_SPR_CMD_OFST		0x3C
+#define ECC_ERR_CNT_1BIT_OFST		0x40
+#define ECC_ERR_CNT_2BIT_OFST		0x44
+#define DMA_ADDR0_OFST			0x50
+#define DATA_INTERFACE_OFST		0x6C
+
+#define PKT_CNT_SHIFT			12
+
+#define ECC_ENABLE			BIT(31)
+#define DMA_EN_MASK			GENMASK(27, 26)
+#define DMA_ENABLE			0x2
+#define DMA_EN_SHIFT			26
+#define REG_PAGE_SIZE_SHIFT		23
+#define REG_PAGE_SIZE_512		0
+#define REG_PAGE_SIZE_1K		5
+#define REG_PAGE_SIZE_2K		1
+#define REG_PAGE_SIZE_4K		2
+#define REG_PAGE_SIZE_8K		3
+#define REG_PAGE_SIZE_16K		4
+#define CMD2_SHIFT			8
+#define ADDR_CYCLES_SHIFT		28
+
+#define XFER_COMPLETE			BIT(2)
+#define READ_READY			BIT(1)
+#define WRITE_READY			BIT(0)
+#define MBIT_ERROR			BIT(3)
+
+#define PROG_PGRD			BIT(0)
+#define PROG_ERASE			BIT(2)
+#define PROG_STATUS			BIT(3)
+#define PROG_PGPROG			BIT(4)
+#define PROG_RDID			BIT(6)
+#define PROG_RDPARAM			BIT(7)
+#define PROG_RST			BIT(8)
+#define PROG_GET_FEATURE		BIT(9)
+#define PROG_SET_FEATURE		BIT(10)
+
+#define PG_ADDR_SHIFT			16
+#define BCH_MODE_SHIFT			25
+#define BCH_EN_SHIFT			27
+#define ECC_SIZE_SHIFT			16
+
+#define MEM_ADDR_MASK			GENMASK(7, 0)
+#define BCH_MODE_MASK			GENMASK(27, 25)
+
+#define CS_MASK				GENMASK(31, 30)
+#define CS_SHIFT			30
+
+#define PAGE_ERR_CNT_MASK		GENMASK(16, 8)
+#define PKT_ERR_CNT_MASK		GENMASK(7, 0)
+
+#define NVDDR_MODE			BIT(9)
+#define NVDDR_TIMING_MODE_SHIFT		3
+
+#define ONFI_ID_LEN			8
+#define TEMP_BUF_SIZE			1024
+#define NVDDR_MODE_PACKET_SIZE		8
+#define SDR_MODE_PACKET_SIZE		4
+
+#define ONFI_DATA_INTERFACE_NVDDR      BIT(4)
+#define EVENT_MASK	(XFER_COMPLETE | READ_READY | WRITE_READY | MBIT_ERROR)
+
+/**
+ * struct anfc_nand_chip - Defines the nand chip related information
+ * @node:		used to store NAND chips into a list.
+ * @chip:		NAND chip information structure.
+ * @bch:		Bch / Hamming mode enable/disable.
+ * @bchmode:		Bch mode.
+ * @eccval:		Ecc config value.
+ * @raddr_cycles:	Row address cycle information.
+ * @caddr_cycles:	Column address cycle information.
+ * @pktsize:		Packet size for read / write operation.
+ * @csnum:		chipselect number to be used.
+ * @spktsize:		Packet size in ddr mode for status operation.
+ * @inftimeval		Data interface and timing mode information
+ */
+struct anfc_nand_chip {
+	struct list_head node;
+	struct nand_chip chip;
+	bool bch;
+	u32 bchmode;
+	u32 eccval;
+	u16 raddr_cycles;
+	u16 caddr_cycles;
+	u32 pktsize;
+	int csnum;
+	u32 spktsize;
+	u32 inftimeval;
+};
+
+/**
+ * struct anfc - Defines the Arasan NAND flash driver instance
+ * @controller:		base controller structure.
+ * @chips:		list of all nand chips attached to the ctrler.
+ * @dev:		Pointer to the device structure.
+ * @base:		Virtual address of the NAND flash device.
+ * @curr_cmd:		Current command issued.
+ * @clk_sys:		Pointer to the system clock.
+ * @clk_flash:		Pointer to the flash clock.
+ * @dma:		Dma enable/disable.
+ * @iswriteoob:		Identifies if oob write operation is required.
+ * @buf:		Buffer used for read/write byte operations.
+ * @irq:		irq number
+ * @bufshift:		Variable used for indexing buffer operation
+ * @csnum:		Chip select number currently inuse.
+ * @event:		Completion event for nand status events.
+ */
+struct anfc {
+	struct nand_hw_control controller;
+	struct list_head chips;
+	struct device *dev;
+	void __iomem *base;
+	int curr_cmd;
+	struct clk *clk_sys;
+	struct clk *clk_flash;
+	bool dma;
+	bool iswriteoob;
+	u8 buf[TEMP_BUF_SIZE];
+	int irq;
+	u32 bufshift;
+	int csnum;
+	struct completion event;
+};
+
+static int anfc_ooblayout_ecc(struct mtd_info *mtd, int section,
+				    struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *nand = mtd_to_nand(mtd);
+
+	if (section)
+		return -ERANGE;
+
+	oobregion->length = nand->ecc.total;
+	oobregion->offset = mtd->oobsize - oobregion->length;
+
+	return 0;
+}
+
+static int anfc_ooblayout_free(struct mtd_info *mtd, int section,
+				     struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *nand = mtd_to_nand(mtd);
+
+	if (section)
+		return -ERANGE;
+
+	oobregion->offset = 2;
+	oobregion->length = mtd->oobsize - nand->ecc.total - 2;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops anfc_ooblayout_ops = {
+	.ecc = anfc_ooblayout_ecc,
+	.free = anfc_ooblayout_free,
+};
+
+static inline struct anfc_nand_chip *to_anfc_nand(struct nand_chip *nand)
+{
+	return container_of(nand, struct anfc_nand_chip, chip);
+}
+
+static inline struct anfc *to_anfc(struct nand_hw_control *ctrl)
+{
+	return container_of(ctrl, struct anfc, controller);
+}
+
+static u8 anfc_page(u32 pagesize)
+{
+	switch (pagesize) {
+	case 512:
+		return REG_PAGE_SIZE_512;
+	case 1024:
+		return REG_PAGE_SIZE_1K;
+	case 2048:
+		return REG_PAGE_SIZE_2K;
+	case 4096:
+		return REG_PAGE_SIZE_4K;
+	case 8192:
+		return REG_PAGE_SIZE_8K;
+	case 16384:
+		return REG_PAGE_SIZE_16K;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static inline void anfc_enable_intrs(struct anfc *nfc, u32 val)
+{
+	writel(val, nfc->base + INTR_STS_EN_OFST);
+	writel(val, nfc->base + INTR_SIG_EN_OFST);
+}
+
+static inline void anfc_config_ecc(struct anfc *nfc, int on)
+{
+	u32 val;
+
+	val = readl(nfc->base + CMD_OFST);
+	if (on)
+		val |= ECC_ENABLE;
+	else
+		val &= ~ECC_ENABLE;
+	writel(val, nfc->base + CMD_OFST);
+}
+
+static inline void anfc_config_dma(struct anfc *nfc, int on)
+{
+	u32 val;
+
+	val = readl(nfc->base + CMD_OFST);
+	val &= ~DMA_EN_MASK;
+	if (on)
+		val |= DMA_ENABLE << DMA_EN_SHIFT;
+	writel(val, nfc->base + CMD_OFST);
+}
+
+static inline int anfc_wait_for_event(struct anfc *nfc)
+{
+	return wait_for_completion_timeout(&nfc->event,
+					msecs_to_jiffies(EVNT_TIMEOUT_MSEC));
+}
+
+static inline void anfc_setpktszcnt(struct anfc *nfc, u32 pktsize,
+				    u32 pktcount)
+{
+	writel(pktsize | (pktcount << PKT_CNT_SHIFT), nfc->base + PKT_OFST);
+}
+
+static inline void anfc_set_eccsparecmd(struct anfc *nfc,
+				struct anfc_nand_chip *achip, u8 cmd1, u8 cmd2)
+{
+	writel(cmd1 | (cmd2 << CMD2_SHIFT) |
+	       (achip->caddr_cycles << ADDR_CYCLES_SHIFT),
+	       nfc->base + ECC_SPR_CMD_OFST);
+}
+
+static void anfc_setpagecoladdr(struct anfc *nfc, u32 page, u16 col)
+{
+	u32 val;
+
+	writel(col | (page << PG_ADDR_SHIFT), nfc->base + MEM_ADDR1_OFST);
+
+	val = readl(nfc->base + MEM_ADDR2_OFST);
+	val = (val & ~MEM_ADDR_MASK) |
+	      ((page >> PG_ADDR_SHIFT) & MEM_ADDR_MASK);
+	writel(val, nfc->base + MEM_ADDR2_OFST);
+}
+
+static void anfc_prepare_cmd(struct anfc *nfc, u8 cmd1, u8 cmd2, u8 dmamode,
+			     u32 pagesize, u8 addrcycles)
+{
+	u32 regval;
+
+	regval = cmd1 | (cmd2 << CMD2_SHIFT);
+	if (dmamode && nfc->dma)
+		regval |= DMA_ENABLE << DMA_EN_SHIFT;
+	regval |= addrcycles << ADDR_CYCLES_SHIFT;
+	regval |= anfc_page(pagesize) << REG_PAGE_SIZE_SHIFT;
+	writel(regval, nfc->base + CMD_OFST);
+}
+
+static int anfc_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
+			  int page)
+{
+	struct anfc *nfc = to_anfc(chip->controller);
+
+	nfc->iswriteoob = true;
+	chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page);
+	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+	nfc->iswriteoob = false;
+
+	return 0;
+}
+
+static void anfc_rw_buf_dma(struct mtd_info *mtd, uint8_t *buf, int len,
+			    int operation, u32 prog)
+{
+	dma_addr_t paddr;
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct anfc *nfc = to_anfc(chip->controller);
+	struct anfc_nand_chip *achip = to_anfc_nand(chip);
+	u32 eccintr = 0, dir;
+	u32 pktsize = len, pktcount = 1;
+
+	if ((nfc->curr_cmd == NAND_CMD_READ0) ||
+		((nfc->curr_cmd == NAND_CMD_SEQIN) && !nfc->iswriteoob)) {
+		pktsize = achip->pktsize;
+		pktcount = DIV_ROUND_UP(mtd->writesize, pktsize);
+	}
+	anfc_setpktszcnt(nfc, pktsize, pktcount);
+
+	if (!achip->bch && (nfc->curr_cmd == NAND_CMD_READ0))
+		eccintr = MBIT_ERROR;
+
+	if (operation)
+		dir = DMA_FROM_DEVICE;
+	else
+		dir = DMA_TO_DEVICE;
+
+	paddr = dma_map_single(nfc->dev, buf, len, dir);
+	if (dma_mapping_error(nfc->dev, paddr)) {
+		dev_err(nfc->dev, "Read buffer mapping error");
+		return;
+	}
+	lo_hi_writeq(paddr, nfc->base + DMA_ADDR0_OFST);
+	anfc_enable_intrs(nfc, (XFER_COMPLETE | eccintr));
+	writel(prog, nfc->base + PROG_OFST);
+	anfc_wait_for_event(nfc);
+	dma_unmap_single(nfc->dev, paddr, len, dir);
+}
+
+static void anfc_rw_buf_pio(struct mtd_info *mtd, uint8_t *buf, int len,
+			    int operation, int prog)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct anfc *nfc = to_anfc(chip->controller);
+	struct anfc_nand_chip *achip = to_anfc_nand(chip);
+	u32 *bufptr = (u32 *)buf;
+	u32 cnt = 0, intr = 0;
+	u32 pktsize = len, pktcount = 1;
+
+	anfc_config_dma(nfc, 0);
+
+	if ((nfc->curr_cmd == NAND_CMD_READ0) ||
+		((nfc->curr_cmd == NAND_CMD_SEQIN) && !nfc->iswriteoob)) {
+		pktsize = achip->pktsize;
+		pktcount = DIV_ROUND_UP(mtd->writesize, pktsize);
+	}
+	anfc_setpktszcnt(nfc, pktsize, pktcount);
+
+	if (!achip->bch && (nfc->curr_cmd == NAND_CMD_READ0))
+		intr = MBIT_ERROR;
+
+	if (operation)
+		intr |= READ_READY;
+	else
+		intr |= WRITE_READY;
+
+	anfc_enable_intrs(nfc, intr);
+	writel(prog, nfc->base + PROG_OFST);
+
+	while (cnt < pktcount) {
+		anfc_wait_for_event(nfc);
+		cnt++;
+		if (cnt == pktcount)
+			anfc_enable_intrs(nfc, XFER_COMPLETE);
+		if (operation)
+			ioread32_rep(nfc->base + DATA_PORT_OFST, bufptr,
+				     pktsize/4);
+		else
+			iowrite32_rep(nfc->base + DATA_PORT_OFST, bufptr,
+				      pktsize/4);
+		bufptr += (pktsize / 4);
+		if (cnt < pktcount)
+			anfc_enable_intrs(nfc, intr);
+	}
+
+	anfc_wait_for_event(nfc);
+}
+
+static void anfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct anfc *nfc = to_anfc(chip->controller);
+
+	if (nfc->dma && !is_vmalloc_addr(buf))
+		anfc_rw_buf_dma(mtd, buf, len, 1, PROG_PGRD);
+	else
+		anfc_rw_buf_pio(mtd, buf, len, 1, PROG_PGRD);
+}
+
+static void anfc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct anfc *nfc = to_anfc(chip->controller);
+
+	if (nfc->dma && !is_vmalloc_addr(buf))
+		anfc_rw_buf_dma(mtd, (char *)buf, len, 0, PROG_PGPROG);
+	else
+		anfc_rw_buf_pio(mtd, (char *)buf, len, 0, PROG_PGPROG);
+}
+
+static int anfc_read_page_hwecc(struct mtd_info *mtd,
+				struct nand_chip *chip, uint8_t *buf,
+				int oob_required, int page)
+{
+	u32 val;
+	struct anfc *nfc = to_anfc(chip->controller);
+	struct anfc_nand_chip *achip = to_anfc_nand(chip);
+
+	anfc_set_eccsparecmd(nfc, achip, NAND_CMD_RNDOUT, NAND_CMD_RNDOUTSTART);
+	anfc_config_ecc(nfc, 1);
+
+	val = readl(nfc->base + CMD_OFST);
+	val = val | ECC_ENABLE;
+	writel(val, nfc->base + CMD_OFST);
+
+	chip->read_buf(mtd, buf, mtd->writesize);
+
+	val = readl(nfc->base + ECC_ERR_CNT_OFST);
+	if (achip->bch) {
+		mtd->ecc_stats.corrected += val & PAGE_ERR_CNT_MASK;
+	} else {
+		val = readl(nfc->base + ECC_ERR_CNT_1BIT_OFST);
+		mtd->ecc_stats.corrected += val;
+		val = readl(nfc->base + ECC_ERR_CNT_2BIT_OFST);
+		mtd->ecc_stats.failed += val;
+		/* Clear ecc error count register 1Bit, 2Bit */
+		writel(0x0, nfc->base + ECC_ERR_CNT_1BIT_OFST);
+		writel(0x0, nfc->base + ECC_ERR_CNT_2BIT_OFST);
+	}
+
+	if (oob_required)
+		chip->ecc.read_oob(mtd, chip, page);
+
+	return 0;
+}
+
+static int anfc_write_page_hwecc(struct mtd_info *mtd,
+				 struct nand_chip *chip, const uint8_t *buf,
+				 int oob_required, int page)
+{
+	int ret;
+	struct anfc *nfc = to_anfc(chip->controller);
+	struct anfc_nand_chip *achip = to_anfc_nand(chip);
+	uint8_t *ecc_calc = chip->buffers->ecccalc;
+
+	anfc_set_eccsparecmd(nfc, achip, NAND_CMD_RNDIN, 0);
+	anfc_config_ecc(nfc, 1);
+
+	chip->write_buf(mtd, buf, mtd->writesize);
+
+	if (oob_required) {
+		chip->waitfunc(mtd, chip);
+		chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+		chip->read_buf(mtd, ecc_calc, mtd->oobsize);
+		ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi,
+						 0, chip->ecc.total);
+		if (ret)
+			return ret;
+		chip->ecc.write_oob(mtd, chip, page);
+	}
+
+	return 0;
+}
+
+static u8 anfc_read_byte(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct anfc *nfc = to_anfc(chip->controller);
+
+	return nfc->buf[nfc->bufshift++];
+}
+
+static int anfc_ecc_init(struct mtd_info *mtd,
+			 struct nand_ecc_ctrl *ecc)
+{
+	u32 ecc_addr;
+	unsigned int bchmode, steps;
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct anfc_nand_chip *achip = to_anfc_nand(chip);
+
+	ecc->mode = NAND_ECC_HW;
+	ecc->read_page = anfc_read_page_hwecc;
+	ecc->write_page = anfc_write_page_hwecc;
+	ecc->write_oob = anfc_write_oob;
+	mtd_set_ooblayout(mtd, &anfc_ooblayout_ops);
+
+	steps = mtd->writesize / chip->ecc_step_ds;
+
+	switch (chip->ecc_strength_ds) {
+	case 12:
+		bchmode = 0x1;
+		break;
+	case 8:
+		bchmode = 0x2;
+		break;
+	case 4:
+		bchmode = 0x3;
+		break;
+	case 24:
+		bchmode = 0x4;
+		break;
+	default:
+		bchmode = 0x0;
+	}
+
+	if (!bchmode)
+		ecc->total = 3 * steps;
+	else
+		ecc->total =
+		     DIV_ROUND_UP(fls(8 * chip->ecc_step_ds) *
+			 chip->ecc_strength_ds * steps, 8);
+
+	ecc->strength = chip->ecc_strength_ds;
+	ecc->size = chip->ecc_step_ds;
+	ecc->bytes = ecc->total / steps;
+	ecc->steps = steps;
+	achip->bchmode = bchmode;
+	achip->bch = achip->bchmode;
+	ecc_addr = mtd->writesize + (mtd->oobsize - ecc->total);
+
+	achip->eccval = ecc_addr | (ecc->total << ECC_SIZE_SHIFT) |
+			(achip->bch << BCH_EN_SHIFT);
+
+	if (chip->ecc_step_ds >= 1024)
+		achip->pktsize = 1024;
+	else
+		achip->pktsize = 512;
+
+	return 0;
+}
+
+static void anfc_cmd_function(struct mtd_info *mtd,
+			      unsigned int cmd, int column, int page_addr)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct anfc_nand_chip *achip = to_anfc_nand(chip);
+	struct anfc *nfc = to_anfc(chip->controller);
+	bool wait = false, read = false;
+	u32 addrcycles, prog;
+	u32 *bufptr = (u32 *)nfc->buf;
+
+	nfc->bufshift = 0;
+	nfc->curr_cmd = cmd;
+
+	if (page_addr == -1)
+		page_addr = 0;
+	if (column == -1)
+		column = 0;
+
+	switch (cmd) {
+	case NAND_CMD_RESET:
+		anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 0);
+		prog = PROG_RST;
+		wait = true;
+		break;
+	case NAND_CMD_SEQIN:
+		addrcycles = achip->raddr_cycles + achip->caddr_cycles;
+		anfc_prepare_cmd(nfc, cmd, NAND_CMD_PAGEPROG, 1,
+				 mtd->writesize, addrcycles);
+		anfc_setpagecoladdr(nfc, page_addr, column);
+		break;
+	case NAND_CMD_READOOB:
+		column += mtd->writesize;
+	case NAND_CMD_READ0:
+	case NAND_CMD_READ1:
+		addrcycles = achip->raddr_cycles + achip->caddr_cycles;
+		anfc_prepare_cmd(nfc, NAND_CMD_READ0, NAND_CMD_READSTART, 1,
+				 mtd->writesize, addrcycles);
+		anfc_setpagecoladdr(nfc, page_addr, column);
+		break;
+	case NAND_CMD_RNDOUT:
+		anfc_prepare_cmd(nfc, cmd, NAND_CMD_RNDOUTSTART, 1,
+				 mtd->writesize, 2);
+		anfc_setpagecoladdr(nfc, page_addr, column);
+		break;
+	case NAND_CMD_PARAM:
+		anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 1);
+		anfc_setpagecoladdr(nfc, page_addr, column);
+		anfc_rw_buf_pio(mtd, nfc->buf,
+				(4 * sizeof(struct nand_onfi_params)),
+				1, PROG_RDPARAM);
+		break;
+	case NAND_CMD_READID:
+		anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 1);
+		anfc_setpagecoladdr(nfc, page_addr, column);
+		anfc_rw_buf_pio(mtd, nfc->buf, ONFI_ID_LEN, 1, PROG_RDID);
+		break;
+	case NAND_CMD_ERASE1:
+		addrcycles = achip->raddr_cycles;
+		prog = PROG_ERASE;
+		anfc_prepare_cmd(nfc, cmd, NAND_CMD_ERASE2, 0, 0, addrcycles);
+		column = page_addr & 0xffff;
+		page_addr = (page_addr >> PG_ADDR_SHIFT) & 0xffff;
+		anfc_setpagecoladdr(nfc, page_addr, column);
+		wait = true;
+		break;
+	case NAND_CMD_STATUS:
+		anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 0);
+		anfc_setpktszcnt(nfc, achip->spktsize/4, 1);
+		anfc_setpagecoladdr(nfc, page_addr, column);
+		prog = PROG_STATUS;
+		wait = read = true;
+		break;
+	case NAND_CMD_GET_FEATURES:
+		anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 1);
+		anfc_setpagecoladdr(nfc, page_addr, column);
+		anfc_rw_buf_pio(mtd, nfc->buf, achip->spktsize, 1,
+				PROG_GET_FEATURE);
+		break;
+	case NAND_CMD_SET_FEATURES:
+		anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 1);
+		anfc_setpagecoladdr(nfc, page_addr, column);
+		break;
+	default:
+		return;
+	}
+
+	if (wait) {
+		anfc_enable_intrs(nfc, XFER_COMPLETE);
+		writel(prog, nfc->base + PROG_OFST);
+		anfc_wait_for_event(nfc);
+	}
+
+	if (read)
+		bufptr[0] = readl(nfc->base + FLASH_STS_OFST);
+}
+
+static void anfc_select_chip(struct mtd_info *mtd, int num)
+{
+	u32 val;
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct anfc_nand_chip *achip = to_anfc_nand(chip);
+	struct anfc *nfc = to_anfc(chip->controller);
+
+	if (num == -1)
+		return;
+
+	val = readl(nfc->base + MEM_ADDR2_OFST);
+	val &= (val & ~(CS_MASK | BCH_MODE_MASK));
+	val |= (achip->csnum << CS_SHIFT) | (achip->bchmode << BCH_MODE_SHIFT);
+	writel(val, nfc->base + MEM_ADDR2_OFST);
+	nfc->csnum = achip->csnum;
+	writel(achip->eccval, nfc->base + ECC_OFST);
+	writel(achip->inftimeval, nfc->base + DATA_INTERFACE_OFST);
+}
+
+static irqreturn_t anfc_irq_handler(int irq, void *ptr)
+{
+	struct anfc *nfc = ptr;
+	u32 status;
+
+	status = readl(nfc->base + INTR_STS_OFST);
+	if (status & EVENT_MASK) {
+		complete(&nfc->event);
+		writel((status & EVENT_MASK), nfc->base + INTR_STS_OFST);
+		writel(0, nfc->base + INTR_STS_EN_OFST);
+		writel(0, nfc->base + INTR_SIG_EN_OFST);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static int anfc_onfi_set_features(struct mtd_info *mtd, struct nand_chip *chip,
+				int addr, uint8_t *subfeature_param)
+{
+	struct anfc_nand_chip *achip = to_anfc_nand(chip);
+	int status;
+
+	if (!chip->onfi_version)
+		return -EINVAL;
+
+	if (!(le16_to_cpu(chip->onfi_params.opt_cmd) &
+		ONFI_OPT_CMD_SET_GET_FEATURES))
+		return -EINVAL;
+
+	chip->cmdfunc(mtd, NAND_CMD_SET_FEATURES, addr, -1);
+	anfc_rw_buf_pio(mtd, subfeature_param, achip->spktsize,
+			0, PROG_SET_FEATURE);
+	status = chip->waitfunc(mtd, chip);
+	if (status & NAND_STATUS_FAIL)
+		return -EIO;
+
+	return 0;
+}
+
+static int anfc_init_timing_mode(struct anfc *nfc,
+				 struct anfc_nand_chip *achip)
+{
+	int mode, err;
+	unsigned int feature[2];
+	u32 inftimeval;
+	struct nand_chip *chip = &achip->chip;
+	struct mtd_info *mtd = nand_to_mtd(chip);
+
+	memset(feature, 0, NVDDR_MODE_PACKET_SIZE);
+	/* Get nvddr timing modes */
+	mode = onfi_get_sync_timing_mode(chip) & 0xff;
+	if (!mode) {
+		mode = fls(onfi_get_async_timing_mode(chip)) - 1;
+		inftimeval = mode;
+	} else {
+		mode = fls(mode) - 1;
+		inftimeval = NVDDR_MODE | (mode << NVDDR_TIMING_MODE_SHIFT);
+		mode |= ONFI_DATA_INTERFACE_NVDDR;
+	}
+
+	feature[0] = mode;
+	chip->select_chip(mtd, achip->csnum);
+	err = chip->onfi_set_features(mtd, chip, ONFI_FEATURE_ADDR_TIMING_MODE,
+				      (uint8_t *)feature);
+	chip->select_chip(mtd, -1);
+	if (err)
+		return err;
+
+	achip->inftimeval = inftimeval;
+
+	if (mode & ONFI_DATA_INTERFACE_NVDDR)
+		achip->spktsize = NVDDR_MODE_PACKET_SIZE;
+
+	return 0;
+}
+
+static int anfc_nand_chip_init(struct anfc *nfc,
+				struct anfc_nand_chip *anand_chip,
+				struct device_node *np)
+{
+	struct nand_chip *chip = &anand_chip->chip;
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	int ret;
+
+	ret = of_property_read_u32(np, "reg", &anand_chip->csnum);
+	if (ret) {
+		dev_err(nfc->dev, "can't get chip-select\n");
+		return -ENXIO;
+	}
+
+	mtd->name = devm_kasprintf(nfc->dev, GFP_KERNEL, "arasan_nand.%d",
+				   anand_chip->csnum);
+	mtd->dev.parent = nfc->dev;
+
+	chip->cmdfunc = anfc_cmd_function;
+	chip->chip_delay = 30;
+	chip->controller = &nfc->controller;
+	chip->read_buf = anfc_read_buf;
+	chip->write_buf = anfc_write_buf;
+	chip->read_byte = anfc_read_byte;
+	chip->options = NAND_BUSWIDTH_AUTO | NAND_NO_SUBPAGE_WRITE;
+	chip->bbt_options = NAND_BBT_USE_FLASH;
+	chip->select_chip = anfc_select_chip;
+	chip->onfi_set_features = anfc_onfi_set_features;
+	nand_set_flash_node(chip, np);
+
+	anand_chip->spktsize = SDR_MODE_PACKET_SIZE;
+	ret = nand_scan_ident(mtd, 1, NULL);
+	if (ret) {
+		dev_err(nfc->dev, "nand_scan_ident for NAND failed\n");
+		return ret;
+	}
+	if (chip->onfi_version) {
+		anand_chip->raddr_cycles = chip->onfi_params.addr_cycles & 0xf;
+		anand_chip->caddr_cycles =
+				(chip->onfi_params.addr_cycles >> 4) & 0xf;
+	} else {
+		/* For non-ONFI devices, configuring the address cyles as 5 */
+		anand_chip->raddr_cycles = 3;
+		anand_chip->caddr_cycles = 2;
+	}
+
+	ret = anfc_init_timing_mode(nfc, anand_chip);
+	if (ret) {
+		dev_err(nfc->dev, "timing mode init failed\n");
+		return ret;
+	}
+
+	ret = anfc_ecc_init(mtd, &chip->ecc);
+	if (ret)
+		return ret;
+
+	ret = nand_scan_tail(mtd);
+	if (ret) {
+		dev_err(nfc->dev, "nand_scan_tail for NAND failed\n");
+		return ret;
+	}
+
+	return mtd_device_register(mtd, NULL, 0);
+}
+
+static int anfc_probe(struct platform_device *pdev)
+{
+	struct anfc *nfc;
+	struct anfc_nand_chip *anand_chip;
+	struct device_node *np = pdev->dev.of_node, *child;
+	struct resource *res;
+	int err;
+
+	nfc = devm_kzalloc(&pdev->dev, sizeof(*nfc), GFP_KERNEL);
+	if (!nfc)
+		return -ENOMEM;
+
+	init_waitqueue_head(&nfc->controller.wq);
+	INIT_LIST_HEAD(&nfc->chips);
+	init_completion(&nfc->event);
+	nfc->dev = &pdev->dev;
+	platform_set_drvdata(pdev, nfc);
+	nfc->csnum = -1;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	nfc->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(nfc->base))
+		return PTR_ERR(nfc->base);
+	nfc->dma = of_property_read_bool(pdev->dev.of_node,
+					 "arasan,has-mdma");
+	nfc->irq = platform_get_irq(pdev, 0);
+	if (nfc->irq < 0) {
+		dev_err(&pdev->dev, "platform_get_irq failed\n");
+		return -ENXIO;
+	}
+	err = devm_request_irq(&pdev->dev, nfc->irq, anfc_irq_handler,
+			       0, "arasannfc", nfc);
+	if (err)
+		return err;
+	nfc->clk_sys = devm_clk_get(&pdev->dev, "clk_sys");
+	if (IS_ERR(nfc->clk_sys)) {
+		dev_err(&pdev->dev, "sys clock not found.\n");
+		return PTR_ERR(nfc->clk_sys);
+	}
+
+	nfc->clk_flash = devm_clk_get(&pdev->dev, "clk_flash");
+	if (IS_ERR(nfc->clk_flash)) {
+		dev_err(&pdev->dev, "flash clock not found.\n");
+		return PTR_ERR(nfc->clk_flash);
+	}
+
+	err = clk_prepare_enable(nfc->clk_sys);
+	if (err) {
+		dev_err(&pdev->dev, "Unable to enable sys clock.\n");
+		return err;
+	}
+
+	err = clk_prepare_enable(nfc->clk_flash);
+	if (err) {
+		dev_err(&pdev->dev, "Unable to enable flash clock.\n");
+		goto clk_dis_sys;
+	}
+
+	for_each_available_child_of_node(np, child) {
+		anand_chip = devm_kzalloc(&pdev->dev, sizeof(*anand_chip),
+					  GFP_KERNEL);
+		if (!anand_chip) {
+			of_node_put(child);
+			err = -ENOMEM;
+			goto nandchip_clean_up;
+		}
+
+		err = anfc_nand_chip_init(nfc, anand_chip, child);
+		if (err) {
+			devm_kfree(&pdev->dev, anand_chip);
+			continue;
+		}
+
+		list_add_tail(&anand_chip->node, &nfc->chips);
+	}
+
+	return 0;
+
+nandchip_clean_up:
+	list_for_each_entry(anand_chip, &nfc->chips, node)
+		nand_release(nand_to_mtd(&anand_chip->chip));
+	clk_disable_unprepare(nfc->clk_flash);
+clk_dis_sys:
+	clk_disable_unprepare(nfc->clk_sys);
+
+	return err;
+}
+
+static int anfc_remove(struct platform_device *pdev)
+{
+	struct anfc *nfc = platform_get_drvdata(pdev);
+	struct anfc_nand_chip *anand_chip;
+
+	list_for_each_entry(anand_chip, &nfc->chips, node)
+		nand_release(nand_to_mtd(&anand_chip->chip));
+
+	clk_disable_unprepare(nfc->clk_sys);
+	clk_disable_unprepare(nfc->clk_flash);
+
+	return 0;
+}
+
+static const struct of_device_id anfc_ids[] = {
+	{ .compatible = "arasan,nfc-v3p10" },
+	{  }
+};
+MODULE_DEVICE_TABLE(of, anfc_ids);
+
+static struct platform_driver anfc_driver = {
+	.driver = {
+		.name = DRIVER_NAME,
+		.of_match_table = anfc_ids,
+	},
+	.probe = anfc_probe,
+	.remove = anfc_remove,
+};
+module_platform_driver(anfc_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Xilinx, Inc");
+MODULE_DESCRIPTION("Arasan NAND Flash Controller Driver");