Message ID | 1486928328-25870-1-git-send-email-stefan.wahren@i2se.com |
---|---|
State | Not Applicable, archived |
Headers | show |
Stefan Wahren <stefan.wahren@i2se.com> writes: > Add a thermal zone in order to make the example complete. > > Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> This looks fine to me. Eduardo, will this be enough to get the driver in?
On Sun, Feb 12, 2017 at 07:38:48PM +0000, Stefan Wahren wrote: > As suggested by Eduardo Valentin this adds the thermal zone for > the bcm2835 SoC with its single thermal sensor. We start with > the criticial trip point and leave the cooling devices empty > since we don't have any at the moment. > > Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> > --- > > Changes in V2: > - add missing thermal-sensor-cells property > - change gpu-thermal to cpu-thermal > > arch/arm/boot/dts/bcm283x.dtsi | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > > diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi > index a3106aa..4dc74f6 100644 > --- a/arch/arm/boot/dts/bcm283x.dtsi > +++ b/arch/arm/boot/dts/bcm283x.dtsi > @@ -19,6 +19,25 @@ > bootargs = "earlyprintk console=ttyAMA0"; > }; > > + thermal-zones { > + cpu_thermal: cpu-thermal { > + polling-delay-passive = <0>; > + polling-delay = <1000>; > + Check the diff I sent and also add the following for differentiating the offsets and slopes depending on which chip the zone describes: coefficients = <-538 407000>; /* for the zone on bcm2835 and bcm2836 */ and coefficients = <-538 412000>; /* for the zone on bcm2837 */ Despite the changes mentioned for the driver and DT, I am ok with the driver and the DTS descriptors. BR, -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Eduardo, > Eduardo Valentin <edubezval@gmail.com> hat am 19. Februar 2017 um 02:17 geschrieben: > > > On Sun, Feb 12, 2017 at 07:38:48PM +0000, Stefan Wahren wrote: > > As suggested by Eduardo Valentin this adds the thermal zone for > > the bcm2835 SoC with its single thermal sensor. We start with > > the criticial trip point and leave the cooling devices empty > > since we don't have any at the moment. > > > > Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> > > --- > > > > Changes in V2: > > - add missing thermal-sensor-cells property > > - change gpu-thermal to cpu-thermal > > > > arch/arm/boot/dts/bcm283x.dtsi | 20 ++++++++++++++++++++ > > 1 file changed, 20 insertions(+) > > > > diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi > > index a3106aa..4dc74f6 100644 > > --- a/arch/arm/boot/dts/bcm283x.dtsi > > +++ b/arch/arm/boot/dts/bcm283x.dtsi > > @@ -19,6 +19,25 @@ > > bootargs = "earlyprintk console=ttyAMA0"; > > }; > > > > + thermal-zones { > > + cpu_thermal: cpu-thermal { > > + polling-delay-passive = <0>; > > + polling-delay = <1000>; > > + > > Check the diff I sent and also add the following for differentiating the > offsets and slopes depending on which chip the zone describes: > coefficients = <-538 407000>; /* for the zone on bcm2835 and bcm2836 */ > > and > > coefficients = <-538 412000>; /* for the zone on bcm2837 */ > > > Despite the changes mentioned for the driver and DT, I am ok with the driver and the DTS descriptors. thanks for providing the necessary driver changes, but the coefficients above causes a DTC parse error. The Device Tree doesn't provide support for native signed integer. Looking at this old thread [1] suggests to add parentheses which fixed the parse issue. But of-thermal expected u32 for coefficients [2]. Any suggestions? [1] - http://lists.infradead.org/pipermail/linux-arm-kernel/2013-April/159681.html [2] - http://elixir.free-electrons.com/source/drivers/thermal/of-thermal.c?v=4.10-rc7#L854 > > BR, -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hey Stefan, On Sun, Feb 19, 2017 at 01:31:49PM +0100, Stefan Wahren wrote: > Hi Eduardo, > > > Eduardo Valentin <edubezval@gmail.com> hat am 19. Februar 2017 um 02:17 geschrieben: > > > > > > On Sun, Feb 12, 2017 at 07:38:48PM +0000, Stefan Wahren wrote: > > > As suggested by Eduardo Valentin this adds the thermal zone for > > > the bcm2835 SoC with its single thermal sensor. We start with > > > the criticial trip point and leave the cooling devices empty > > > since we don't have any at the moment. > > > > > > Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> > > > --- > > > > > > Changes in V2: > > > - add missing thermal-sensor-cells property > > > - change gpu-thermal to cpu-thermal > > > > > > arch/arm/boot/dts/bcm283x.dtsi | 20 ++++++++++++++++++++ > > > 1 file changed, 20 insertions(+) > > > > > > diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi > > > index a3106aa..4dc74f6 100644 > > > --- a/arch/arm/boot/dts/bcm283x.dtsi > > > +++ b/arch/arm/boot/dts/bcm283x.dtsi > > > @@ -19,6 +19,25 @@ > > > bootargs = "earlyprintk console=ttyAMA0"; > > > }; > > > > > > + thermal-zones { > > > + cpu_thermal: cpu-thermal { > > > + polling-delay-passive = <0>; > > > + polling-delay = <1000>; > > > + > > > > Check the diff I sent and also add the following for differentiating the > > offsets and slopes depending on which chip the zone describes: > > coefficients = <-538 407000>; /* for the zone on bcm2835 and bcm2836 */ > > > > and > > > > coefficients = <-538 412000>; /* for the zone on bcm2837 */ > > > > > > Despite the changes mentioned for the driver and DT, I am ok with the driver and the DTS descriptors. > > thanks for providing the necessary driver changes, but the coefficients above causes a DTC parse error. The Device Tree doesn't provide support for native signed integer. Looking at this old thread [1] suggests to add parentheses which fixed the parse issue. But of-thermal expected u32 for coefficients [2]. > > Any suggestions? I am OK if you provide a patch to of-thermal in your series, assuming that would fix the representation issue the data of your driver has. BR, > > [1] - http://lists.infradead.org/pipermail/linux-arm-kernel/2013-April/159681.html > [2] - http://elixir.free-electrons.com/source/drivers/thermal/of-thermal.c?v=4.10-rc7#L854 > > > > > BR, -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
> Eduardo Valentin <edubezval@gmail.com> hat am 19. Februar 2017 um 22:27 geschrieben: > > > Hey Stefan, > > > On Sun, Feb 19, 2017 at 01:31:49PM +0100, Stefan Wahren wrote: > > Hi Eduardo, > > > > > Eduardo Valentin <edubezval@gmail.com> hat am 19. Februar 2017 um 02:17 geschrieben: > > > > > > > > > On Sun, Feb 12, 2017 at 07:38:48PM +0000, Stefan Wahren wrote: > > > > As suggested by Eduardo Valentin this adds the thermal zone for > > > > the bcm2835 SoC with its single thermal sensor. We start with > > > > the criticial trip point and leave the cooling devices empty > > > > since we don't have any at the moment. > > > > > > > > Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> > > > > --- > > > > > > > > Changes in V2: > > > > - add missing thermal-sensor-cells property > > > > - change gpu-thermal to cpu-thermal > > > > > > > > arch/arm/boot/dts/bcm283x.dtsi | 20 ++++++++++++++++++++ > > > > 1 file changed, 20 insertions(+) > > > > > > > > diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi > > > > index a3106aa..4dc74f6 100644 > > > > --- a/arch/arm/boot/dts/bcm283x.dtsi > > > > +++ b/arch/arm/boot/dts/bcm283x.dtsi > > > > @@ -19,6 +19,25 @@ > > > > bootargs = "earlyprintk console=ttyAMA0"; > > > > }; > > > > > > > > + thermal-zones { > > > > + cpu_thermal: cpu-thermal { > > > > + polling-delay-passive = <0>; > > > > + polling-delay = <1000>; > > > > + > > > > > > Check the diff I sent and also add the following for differentiating the > > > offsets and slopes depending on which chip the zone describes: > > > coefficients = <-538 407000>; /* for the zone on bcm2835 and bcm2836 */ > > > > > > and > > > > > > coefficients = <-538 412000>; /* for the zone on bcm2837 */ > > > > > > > > > Despite the changes mentioned for the driver and DT, I am ok with the driver and the DTS descriptors. > > > > thanks for providing the necessary driver changes, but the coefficients above causes a DTC parse error. The Device Tree doesn't provide support for native signed integer. Looking at this old thread [1] suggests to add parentheses which fixed the parse issue. But of-thermal expected u32 for coefficients [2]. > > > > Any suggestions? > > I am OK if you provide a patch to of-thermal in your series, assuming > that would fix the representation issue the data of your driver has. > I prepared a new patch series to fix that issue in my github repo [1]. At first we need to implement a new function of_property_read_s32_array() [2]. After that we could use this function in of-thermal in order to use signed integer for both coefficients [3]. @Eduardo: Is it okay for you? @Martin: Do you want to send the next version of the patch series or should i? [1] - https://github.com/lategoodbye/rpi-zero/commits/thermal [2] - https://github.com/lategoodbye/rpi-zero/commit/3dc43581ada74d1345f79b4c36562fdf5f7941e5 [3] - https://github.com/lategoodbye/rpi-zero/commit/c02ed37c0ebdca98aee570862af10e90b3c9a0d0 > BR, > > > > > [1] - http://lists.infradead.org/pipermail/linux-arm-kernel/2013-April/159681.html > > [2] - http://elixir.free-electrons.com/source/drivers/thermal/of-thermal.c?v=4.10-rc7#L854 > > > > > > > > BR, -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sun, Feb 12, 2017 at 07:38:47PM +0000, Stefan Wahren wrote: > Add a thermal zone in order to make the example complete. > > Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> > --- > > Changes in V2: > - add missing thermal-sensor-cells property > - change gpu-thermal to cpu-thermal > > .../bindings/thermal/brcm,bcm2835-thermal.txt | 29 +++++++++++++++++--- > 1 file changed, 25 insertions(+), 4 deletions(-) Acked-by: Rob Herring <robh@kernel.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hey, On Tue, Feb 21, 2017 at 07:14:36PM +0100, Stefan Wahren wrote: > > <cut> > > I prepared a new patch series to fix that issue in my github repo [1]. At first we need to implement a new function of_property_read_s32_array() [2]. After that we could use this function in of-thermal in order to use signed integer for both coefficients [3]. > > @Eduardo: Is it okay for you? > Yes, as I mentioned before, I am OK to patch of-thermal. And the representation of offset and slope are already signed. > @Martin: Do you want to send the next version of the patch series or should i? > > [1] - https://github.com/lategoodbye/rpi-zero/commits/thermal > [2] - https://github.com/lategoodbye/rpi-zero/commit/3dc43581ada74d1345f79b4c36562fdf5f7941e5 > [3] - https://github.com/lategoodbye/rpi-zero/commit/c02ed37c0ebdca98aee570862af10e90b3c9a0d0 > Number 3 is fine with me. Please send them in a single series for proper review in linux-pm. BR, -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt index 474531d..6b8607a 100644 --- a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt @@ -3,15 +3,36 @@ Binding for Thermal Sensor driver for BCM2835 SoCs. Required parameters: ------------------- -compatible: should be one of: "brcm,bcm2835-thermal", - "brcm,bcm2836-thermal" or "brcm,bcm2837-thermal" -reg: Address range of the thermal registers. -clocks: Phandle of the clock used by the thermal sensor. +compatible: should be one of: "brcm,bcm2835-thermal", + "brcm,bcm2836-thermal" or "brcm,bcm2837-thermal" +reg: Address range of the thermal registers. +clocks: Phandle of the clock used by the thermal sensor. +#thermal-sensor-cells: should be 0 (see thermal.txt) Example: +thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <80000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + }; + }; +}; + thermal: thermal@7e212000 { compatible = "brcm,bcm2835-thermal"; reg = <0x7e212000 0x8>; clocks = <&clocks BCM2835_CLOCK_TSENS>; + #thermal-sensor-cells = <0>; };
Add a thermal zone in order to make the example complete. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> --- Changes in V2: - add missing thermal-sensor-cells property - change gpu-thermal to cpu-thermal .../bindings/thermal/brcm,bcm2835-thermal.txt | 29 +++++++++++++++++--- 1 file changed, 25 insertions(+), 4 deletions(-)