diff mbox

ARM64: zynqmp: Fix i2c node's compatible string

Message ID 1482385788-7187-1-git-send-email-moritz.fischer@ettus.com
State New
Headers show

Commit Message

Moritz Fischer Dec. 22, 2016, 5:49 a.m. UTC
From: Moritz Fischer <mdf@kernel.org>

The Zynq Ultrascale MP uses version 1.4 of the Cadence IP core
which fixes some silicon bugs that needed software workarounds
in Version 1.0 that was used on Zynq systems.

Signed-off-by: Moritz Fischer <mdf@kernel.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Sören Brinkmann <soren.brinkmann@xilinx.com>
Cc: U-Boot List <u-boot@lists.denx.de>
Cc: Rob Herring <robh+dt@kernel.org>
---

Hi Michal,

I think this is a slip up and should be r1p14 for
Ultrascale ZynqMP. drivers/i2c/i2c-cadence.c already uses this.
I Cc'd the u-boot list, because the same change would be required there.

Cheers,

Moritz

---
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Michal Simek Dec. 22, 2016, 7:35 a.m. UTC | #1
On 22.12.2016 06:49, Moritz Fischer wrote:
> From: Moritz Fischer <mdf@kernel.org>
> 
> The Zynq Ultrascale MP uses version 1.4 of the Cadence IP core
> which fixes some silicon bugs that needed software workarounds
> in Version 1.0 that was used on Zynq systems.
> 
> Signed-off-by: Moritz Fischer <mdf@kernel.org>
> Cc: Michal Simek <michal.simek@xilinx.com>
> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com>
> Cc: U-Boot List <u-boot@lists.denx.de>
> Cc: Rob Herring <robh+dt@kernel.org>
> ---
> 
> Hi Michal,
> 
> I think this is a slip up and should be r1p14 for
> Ultrascale ZynqMP. drivers/i2c/i2c-cadence.c already uses this.
> I Cc'd the u-boot list, because the same change would be required there.
> 
> Cheers,
> 
> Moritz
> 
> ---
>  arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> index 68a90833..a5a5f91 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> @@ -175,7 +175,7 @@
>  		};
>  
>  		i2c0: i2c@ff020000 {
> -			compatible = "cdns,i2c-r1p10";
> +			compatible = "cdns,i2c-r1p14";

I was checking this internally and p10 is doing something what p14
doesn't need to do. That's why this should be

compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";

The same of course for u-boot where also p14 should be added to the driver.

Thanks,
Michal
Moritz Fischer Dec. 22, 2016, 4:26 p.m. UTC | #2
Hi Michal,

On Wed, Dec 21, 2016 at 11:35 PM, Michal Simek <michal.simek@xilinx.com> wrote:

> compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";

I keep getting that wrong .. .damn ... :) Will resubmit.

> The same of course for u-boot where also p14 should be added to the driver.

Yeah, I realized that part after submitting...

Thanks
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 68a90833..a5a5f91 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -175,7 +175,7 @@ 
 		};
 
 		i2c0: i2c@ff020000 {
-			compatible = "cdns,i2c-r1p10";
+			compatible = "cdns,i2c-r1p14";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 17 4>;
@@ -185,7 +185,7 @@ 
 		};
 
 		i2c1: i2c@ff030000 {
-			compatible = "cdns,i2c-r1p10";
+			compatible = "cdns,i2c-r1p14";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 18 4>;