| Message ID | 1479487989-24543-3-git-send-email-Eugeniy.Paltsev@synopsys.com |
|---|---|
| State | New |
| Headers | show |
On Fri, 2016-11-18 at 19:53 +0300, Eugeniy Paltsev wrote: > Several versions of DW DMAC have multi block transfers hardware > support. Hardware support of multi block transfers is disabled > by default if we use DT to configure DMAC and software emulation > of multi block transfers used instead. > Add multi-block property, so it is possible to enable hardware > multi block transfers (if present) via DT. > > Switch from per device is_nollp variable to multi_block array > to be able enable/disable multi block transfers separately per > channel. > > Update DT documentation. > > Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> > --- > Documentation/devicetree/bindings/dma/snps-dma.txt | 2 ++ > drivers/dma/dw/core.c | 2 +- > drivers/dma/dw/platform.c | 5 +++++ > include/linux/platform_data/dma-dw.h | 4 ++-- > 4 files changed, 10 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt > b/Documentation/devicetree/bindings/dma/snps-dma.txt > index 0f55832..03d6d6d 100644 > --- a/Documentation/devicetree/bindings/dma/snps-dma.txt > +++ b/Documentation/devicetree/bindings/dma/snps-dma.txt > @@ -27,6 +27,8 @@ Optional properties: > that services interrupts for this device > - is_private: The device channels should be marked as private and not > for by the > general purpose DMA channel allocator. False if not passed. > +- multi-block: Multi block transfers supported by hardware per AHB > master. > + 0 (default): not supported, 1: supported. Since default is "not supported" you have to update users accordingly. (Check platform data and existing DTS). > Example: > > diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c > index c2c0a61..f2a3d06 100644 > --- a/drivers/dma/dw/core.c > +++ b/drivers/dma/dw/core.c > @@ -1569,7 +1569,7 @@ int dw_dma_probe(struct dw_dma_chip *chip) > (dwc_params >> DWC_PARAMS_MBLK_EN & > 0x1) == 0; > } else { > dwc->block_size = pdata->block_size; > - dwc->nollp = pdata->is_nollp; > + dwc->nollp = pdata->multi_block[i]; This inverts the default logic. > } > } > > diff --git a/drivers/dma/dw/platform.c b/drivers/dma/dw/platform.c > index aa7a5c1..b262fd3 100644 > --- a/drivers/dma/dw/platform.c > +++ b/drivers/dma/dw/platform.c > @@ -152,6 +152,11 @@ dw_dma_parse_dt(struct platform_device *pdev) > pdata->data_width[tmp] = BIT(arr[tmp] & > 0x07); > } > > + if (!of_property_read_u32_array(np, "multi-block", arr, > nr_masters)) { > + for (tmp = 0; tmp < nr_masters; tmp++) > + pdata->multi_block[tmp] = arr[tmp]; > + } > + > return pdata; > } > #else > diff --git a/include/linux/platform_data/dma-dw.h > b/include/linux/platform_data/dma-dw.h > index 5f0e11e..0773bb4 100644 > --- a/include/linux/platform_data/dma-dw.h > +++ b/include/linux/platform_data/dma-dw.h > @@ -40,19 +40,18 @@ struct dw_dma_slave { > * @is_private: The device channels should be marked as private and > not for > * by the general purpose DMA channel allocator. > * @is_memcpy: The device channels do support memory-to-memory > transfers. > - * @is_nollp: The device channels does not support multi block > transfers. > * @chan_allocation_order: Allocate channels starting from 0 or 7 > * @chan_priority: Set channel priority increasing from 0 to 7 or 7 > to 0. > * @block_size: Maximum block size supported by the controller > * @nr_masters: Number of AHB masters supported by the controller > * @data_width: Maximum data width supported by hardware per AHB > master > * (in bytes, power of 2) > + * @multi_block: Multi block transfers supported by hardware per AHB > master. > */ > struct dw_dma_platform_data { > unsigned int nr_channels; > bool is_private; > bool is_memcpy; > - bool is_nollp; > #define CHAN_ALLOCATION_ASCENDING 0 /* zero to seven */ > #define CHAN_ALLOCATION_DESCENDING 1 /* seven to zero > */ > unsigned char chan_allocation_order; > @@ -62,6 +61,7 @@ struct dw_dma_platform_data { > unsigned int block_size; > unsigned char nr_masters; > unsigned char data_width[DW_DMA_MAX_NR_MASTERS]; > + unsigned char multi_block[DW_DMA_MAX_NR_MASTERS]; > }; > > #endif /* _PLATFORM_DATA_DMA_DW_H */
diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt b/Documentation/devicetree/bindings/dma/snps-dma.txt index 0f55832..03d6d6d 100644 --- a/Documentation/devicetree/bindings/dma/snps-dma.txt +++ b/Documentation/devicetree/bindings/dma/snps-dma.txt @@ -27,6 +27,8 @@ Optional properties: that services interrupts for this device - is_private: The device channels should be marked as private and not for by the general purpose DMA channel allocator. False if not passed. +- multi-block: Multi block transfers supported by hardware per AHB master. + 0 (default): not supported, 1: supported. Example: diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c index c2c0a61..f2a3d06 100644 --- a/drivers/dma/dw/core.c +++ b/drivers/dma/dw/core.c @@ -1569,7 +1569,7 @@ int dw_dma_probe(struct dw_dma_chip *chip) (dwc_params >> DWC_PARAMS_MBLK_EN & 0x1) == 0; } else { dwc->block_size = pdata->block_size; - dwc->nollp = pdata->is_nollp; + dwc->nollp = pdata->multi_block[i]; } } diff --git a/drivers/dma/dw/platform.c b/drivers/dma/dw/platform.c index aa7a5c1..b262fd3 100644 --- a/drivers/dma/dw/platform.c +++ b/drivers/dma/dw/platform.c @@ -152,6 +152,11 @@ dw_dma_parse_dt(struct platform_device *pdev) pdata->data_width[tmp] = BIT(arr[tmp] & 0x07); } + if (!of_property_read_u32_array(np, "multi-block", arr, nr_masters)) { + for (tmp = 0; tmp < nr_masters; tmp++) + pdata->multi_block[tmp] = arr[tmp]; + } + return pdata; } #else diff --git a/include/linux/platform_data/dma-dw.h b/include/linux/platform_data/dma-dw.h index 5f0e11e..0773bb4 100644 --- a/include/linux/platform_data/dma-dw.h +++ b/include/linux/platform_data/dma-dw.h @@ -40,19 +40,18 @@ struct dw_dma_slave { * @is_private: The device channels should be marked as private and not for * by the general purpose DMA channel allocator. * @is_memcpy: The device channels do support memory-to-memory transfers. - * @is_nollp: The device channels does not support multi block transfers. * @chan_allocation_order: Allocate channels starting from 0 or 7 * @chan_priority: Set channel priority increasing from 0 to 7 or 7 to 0. * @block_size: Maximum block size supported by the controller * @nr_masters: Number of AHB masters supported by the controller * @data_width: Maximum data width supported by hardware per AHB master * (in bytes, power of 2) + * @multi_block: Multi block transfers supported by hardware per AHB master. */ struct dw_dma_platform_data { unsigned int nr_channels; bool is_private; bool is_memcpy; - bool is_nollp; #define CHAN_ALLOCATION_ASCENDING 0 /* zero to seven */ #define CHAN_ALLOCATION_DESCENDING 1 /* seven to zero */ unsigned char chan_allocation_order; @@ -62,6 +61,7 @@ struct dw_dma_platform_data { unsigned int block_size; unsigned char nr_masters; unsigned char data_width[DW_DMA_MAX_NR_MASTERS]; + unsigned char multi_block[DW_DMA_MAX_NR_MASTERS]; }; #endif /* _PLATFORM_DATA_DMA_DW_H */
Several versions of DW DMAC have multi block transfers hardware support. Hardware support of multi block transfers is disabled by default if we use DT to configure DMAC and software emulation of multi block transfers used instead. Add multi-block property, so it is possible to enable hardware multi block transfers (if present) via DT. Switch from per device is_nollp variable to multi_block array to be able enable/disable multi block transfers separately per channel. Update DT documentation. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> --- Documentation/devicetree/bindings/dma/snps-dma.txt | 2 ++ drivers/dma/dw/core.c | 2 +- drivers/dma/dw/platform.c | 5 +++++ include/linux/platform_data/dma-dw.h | 4 ++-- 4 files changed, 10 insertions(+), 3 deletions(-)