Message ID | 20100830000751.2b845d05@debxo |
---|---|
State | Not Applicable |
Delegated to: | David Miller |
Headers | show |
On Sun, Aug 29, 2010 at 10:07 PM, Andres Salomon <dilinger@queued.net> wrote: > > Make use of PROC_DEVICETREE to export the tree, and sparc's PROMTREE code to > call into OLPC's Open Firmware to build the tree. > > This also adds an init hook to proc_device_tree_init so that we can ensure > the device tree has been built prior to the proc_root_init stuff attempting > to populate /proc/device-tree. I'm not clear as to why this is needed. I would expect OLPC platform setup code would take care of extracting the device tree well before the kernel gets to setting up the representation in /proc/device-tree. g. > > Signed-off-by: Andres Salomon <dilinger@queued.net> > --- > arch/x86/Kconfig | 2 + > arch/x86/include/asm/olpc_ofw.h | 4 + > arch/x86/include/asm/prom.h | 1 + > arch/x86/kernel/Makefile | 1 + > arch/x86/kernel/olpc_ofw.c | 8 ++ > arch/x86/kernel/olpc_prom.c | 152 +++++++++++++++++++++++++++++++++++++++ > drivers/of/pdt.c | 2 + > fs/proc/proc_devtree.c | 4 + > include/linux/of_pdt.h | 1 + > 9 files changed, 175 insertions(+), 0 deletions(-) > create mode 100644 arch/x86/include/asm/prom.h > create mode 100644 arch/x86/kernel/olpc_prom.c > > diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig > index cea0cd9..7d4ef72 100644 > --- a/arch/x86/Kconfig > +++ b/arch/x86/Kconfig > @@ -2069,6 +2069,8 @@ config OLPC_OPENFIRMWARE > bool "Support for OLPC's Open Firmware" > depends on !X86_64 && !X86_PAE > default y if OLPC > + select OF > + select OF_PROMTREE > help > This option adds support for the implementation of Open Firmware > that is used on the OLPC XO-1 Children's Machine. > diff --git a/arch/x86/include/asm/olpc_ofw.h b/arch/x86/include/asm/olpc_ofw.h > index 08fde47..13075df 100644 > --- a/arch/x86/include/asm/olpc_ofw.h > +++ b/arch/x86/include/asm/olpc_ofw.h > @@ -28,4 +28,8 @@ static inline void setup_olpc_ofw_pgd(void) { } > > #endif /* !CONFIG_OLPC_OPENFIRMWARE */ > > +#ifdef CONFIG_PROC_DEVICETREE > +extern void olpc_prom_build_devicetree(void); > +#endif /* CONFIG_PROC_DEVICETREE */ > + > #endif /* _ASM_X86_OLPC_OFW_H */ > diff --git a/arch/x86/include/asm/prom.h b/arch/x86/include/asm/prom.h > new file mode 100644 > index 0000000..b4ec95f > --- /dev/null > +++ b/arch/x86/include/asm/prom.h > @@ -0,0 +1 @@ > +/* dummy prom.h; here to make linux/of.h's #includes happy */ > diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile > index 0925676..3d7e535 100644 > --- a/arch/x86/kernel/Makefile > +++ b/arch/x86/kernel/Makefile > @@ -105,6 +105,7 @@ scx200-y += scx200_32.o > > obj-$(CONFIG_OLPC) += olpc.o > obj-$(CONFIG_OLPC_OPENFIRMWARE) += olpc_ofw.o > +obj-$(CONFIG_PROC_DEVICETREE) += olpc_prom.o > obj-$(CONFIG_X86_MRST) += mrst.o > > microcode-y := microcode_core.o > diff --git a/arch/x86/kernel/olpc_ofw.c b/arch/x86/kernel/olpc_ofw.c > index 3218aa7..6c4d243 100644 > --- a/arch/x86/kernel/olpc_ofw.c > +++ b/arch/x86/kernel/olpc_ofw.c > @@ -1,5 +1,7 @@ > #include <linux/kernel.h> > #include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_pdt.h> > #include <linux/init.h> > #include <asm/page.h> > #include <asm/setup.h> > @@ -38,6 +40,12 @@ void __init setup_olpc_ofw_pgd(void) > /* implicit optimization barrier here due to uninline function return */ > > early_iounmap(base, sizeof(olpc_ofw_pgd) * PTRS_PER_PGD); > + > +#ifdef CONFIG_PROC_DEVICETREE > + /* OFW set up succesfully; use it for the device tree */ > + of_pdt_init_devicetree = olpc_prom_build_devicetree; > +#endif > + > } > > int __olpc_ofw(const char *name, int nr_args, const void **args, int nr_res, > diff --git a/arch/x86/kernel/olpc_prom.c b/arch/x86/kernel/olpc_prom.c > new file mode 100644 > index 0000000..fb04d8a > --- /dev/null > +++ b/arch/x86/kernel/olpc_prom.c > @@ -0,0 +1,152 @@ > +/* > + * olpc_prom.c: OLPC-specific OFW device tree support code. > + * > + * Paul Mackerras August 1996. > + * Copyright (C) 1996-2005 Paul Mackerras. > + * > + * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner. > + * {engebret|bergner}@us.ibm.com > + * > + * Adapted for sparc by David S. Miller davem@davemloft.net > + * Adapted for x86/OLPC by Andres Salomon <dilinger@queued.net> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * as published by the Free Software Foundation; either version > + * 2 of the License, or (at your option) any later version. > + */ > + > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/errno.h> > +#include <linux/slab.h> > +#include <linux/of.h> > +#include <linux/of_pdt.h> > +#include <asm/olpc_ofw.h> > + > +static phandle __init olpc_prom_getsibling(phandle node) > +{ > + const void *args[] = { (void *)node }; > + void *res[] = { &node }; > + > + if (node == -1) > + return 0; > + > + if (olpc_ofw("peer", args, res) || node == -1) > + return 0; > + > + return node; > +} > + > +static phandle __init olpc_prom_getchild(phandle node) > +{ > + const void *args[] = { (void *)node }; > + void *res[] = { &node }; > + > + if (node == -1) > + return 0; > + > + if (olpc_ofw("child", args, res) || node == -1) { > + pr_err("PROM: %s: fetching child failed!\n", __func__); > + return 0; > + } > + > + return node; > +} > + > +static int __init olpc_prom_getproplen(phandle node, const char *prop) > +{ > + const void *args[] = { (void *)node, prop }; > + int len; > + void *res[] = { &len }; > + > + if (node == -1) > + return -1; > + > + if (olpc_ofw("getproplen", args, res)) { > + pr_err("PROM: %s: getproplen failed!\n", __func__); > + return -1; > + } > + > + return len; > +} > + > +static int __init olpc_prom_getproperty(phandle node, const char *prop, > + char *buf, int bufsize) > +{ > + int plen; > + > + plen = olpc_prom_getproplen(node, prop); > + if (plen > bufsize || plen < 1) > + return -1; > + else { > + const void *args[] = { (void *)node, prop, buf, (void *)plen }; > + void *res[] = { &plen }; > + > + if (olpc_ofw("getprop", args, res)) { > + pr_err("PROM: %s: getprop failed!\n", __func__); > + return -1; > + } > + } > + > + return plen; > +} > + > +static int __init olpc_prom_nextprop(phandle node, const char *prev, char *buf) > +{ > + const void *args[] = { (void *)node, prev, buf }; > + int success; > + void *res[] = { &success }; > + > + buf[0] = '\0'; > + > + if (node == -1) > + return -1; > + > + if (olpc_ofw("nextprop", args, res) || success != 1) > + return -1; > + > + return 0; > +} > + > +static int __init olpc_prom_pkg2path(phandle node, char *buf, > + const int buflen, int *len) > +{ > + const void *args[] = { (void *)node, buf, (void *)buflen }; > + void *res[] = { len }; > + > + if (node == -1) > + return -1; > + > + if (olpc_ofw("package-to-path", args, res) || *len < 1) > + return -1; > + > + return 0; > +} > + > +void * __init prom_early_alloc(unsigned long size) > +{ > + /* this is called late enough that we can alloc normally */ > + return kzalloc(size, GFP_KERNEL); > +} > + > +static struct of_pdt_ops prom_olpc_ops __initdata = { > + .nextprop = olpc_prom_nextprop, > + .getproplen = olpc_prom_getproplen, > + .getproperty = olpc_prom_getproperty, > + .getchild = olpc_prom_getchild, > + .getsibling = olpc_prom_getsibling, > + .pkg2path = olpc_prom_pkg2path, > +}; > + > +void __init olpc_prom_build_devicetree(void) > +{ > + phandle root; > + > + root = olpc_prom_getsibling(0); > + if (root < 0) { > + pr_err("PROM: unable to get root node from OFW!\n"); > + return; > + } > + of_pdt_build_devicetree(root, &prom_olpc_ops); > +} > diff --git a/drivers/of/pdt.c b/drivers/of/pdt.c > index 28295d0..07e3daa 100644 > --- a/drivers/of/pdt.c > +++ b/drivers/of/pdt.c > @@ -29,6 +29,8 @@ static struct of_pdt_ops *of_pdt_prom_ops __initdata; > void __initdata (*of_pdt_build_more)(struct device_node *dp, > struct device_node ***nextp); > > +void __initdata (*of_pdt_init_devicetree)(void); > + > #if defined(CONFIG_SPARC) > unsigned int of_pdt_unique_id __initdata; > > diff --git a/fs/proc/proc_devtree.c b/fs/proc/proc_devtree.c > index d9396a4..9779039 100644 > --- a/fs/proc/proc_devtree.c > +++ b/fs/proc/proc_devtree.c > @@ -11,6 +11,7 @@ > #include <linux/stat.h> > #include <linux/string.h> > #include <linux/of.h> > +#include <linux/of_pdt.h> > #include <linux/module.h> > #include <linux/slab.h> > #include <asm/prom.h> > @@ -228,6 +229,9 @@ void __init proc_device_tree_init(void) > { > struct device_node *root; > > + if (of_pdt_init_devicetree) > + of_pdt_init_devicetree(); > + > proc_device_tree = proc_mkdir("device-tree", NULL); > if (proc_device_tree == NULL) > return; > diff --git a/include/linux/of_pdt.h b/include/linux/of_pdt.h > index 9945e58..b4bd0ee 100644 > --- a/include/linux/of_pdt.h > +++ b/include/linux/of_pdt.h > @@ -38,6 +38,7 @@ extern void *prom_early_alloc(unsigned long size); > > /* for building the device tree */ > extern void of_pdt_build_devicetree(phandle root_node, struct of_pdt_ops *ops); > +extern void (*of_pdt_init_devicetree)(void); > > extern void (*of_pdt_build_more)(struct device_node *dp, > struct device_node ***nextp); > -- > 1.5.6.5 > >
On Mon, 30 Aug 2010 12:14:57 -0600 Grant Likely <grant.likely@secretlab.ca> wrote: > On Sun, Aug 29, 2010 at 10:07 PM, Andres Salomon > <dilinger@queued.net> wrote: > > > > Make use of PROC_DEVICETREE to export the tree, and sparc's > > PROMTREE code to call into OLPC's Open Firmware to build the tree. > > > > This also adds an init hook to proc_device_tree_init so that we can > > ensure the device tree has been built prior to the proc_root_init > > stuff attempting to populate /proc/device-tree. > > I'm not clear as to why this is needed. I would expect OLPC platform > setup code would take care of extracting the device tree well before > the kernel gets to setting up the representation in /proc/device-tree. > > g. > For simplicity; the OLPC platform setup code runs very early during boot. I preferred to keep that as minimal as possible, and defer device tree allocation until the x86 mm code has finished initializing (this skipping all the fun bootmem/etc work that'll be happening for x86 soon). Of course, once it's done initializing, one can either hardcode an olpc_init_devtree call at the end of x86's setup_arch, or we can add a generic hook for late devtree initialization right before proc populates /proc/device-tree. I chose the latter, but it could easily be changed to the former if folks feel strongly about it. I would've normally just used an initcall for it, but the proc_devtree code runs prior to any of the initcall hooks. -- To unsubscribe from this list: send the line "unsubscribe sparclinux" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Aug 30, 2010 at 12:49 PM, Andres Salomon <dilinger@queued.net> wrote: > On Mon, 30 Aug 2010 12:14:57 -0600 > Grant Likely <grant.likely@secretlab.ca> wrote: > >> On Sun, Aug 29, 2010 at 10:07 PM, Andres Salomon >> <dilinger@queued.net> wrote: >> > >> > Make use of PROC_DEVICETREE to export the tree, and sparc's >> > PROMTREE code to call into OLPC's Open Firmware to build the tree. >> > >> > This also adds an init hook to proc_device_tree_init so that we can >> > ensure the device tree has been built prior to the proc_root_init >> > stuff attempting to populate /proc/device-tree. >> >> I'm not clear as to why this is needed. I would expect OLPC platform >> setup code would take care of extracting the device tree well before >> the kernel gets to setting up the representation in /proc/device-tree. >> >> g. >> > > For simplicity; the OLPC platform setup code runs very early during > boot. I preferred to keep that as minimal as possible, and defer > device tree allocation until the x86 mm code has finished initializing > (this skipping all the fun bootmem/etc work that'll be happening for > x86 soon). > > Of course, once it's done initializing, one can either hardcode an > olpc_init_devtree call at the end of x86's setup_arch, or we can add a > generic hook for late devtree initialization right before proc > populates /proc/device-tree. I chose the latter, but it could easily > be changed to the former if folks feel strongly about it. > > I would've normally just used an initcall for it, but the proc_devtree > code runs prior to any of the initcall hooks. Hmmm. I wonder if proc_devtree initialization could be deferred to an initcall. That would make the problem go away. g. -- To unsubscribe from this list: send the line "unsubscribe sparclinux" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index cea0cd9..7d4ef72 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -2069,6 +2069,8 @@ config OLPC_OPENFIRMWARE bool "Support for OLPC's Open Firmware" depends on !X86_64 && !X86_PAE default y if OLPC + select OF + select OF_PROMTREE help This option adds support for the implementation of Open Firmware that is used on the OLPC XO-1 Children's Machine. diff --git a/arch/x86/include/asm/olpc_ofw.h b/arch/x86/include/asm/olpc_ofw.h index 08fde47..13075df 100644 --- a/arch/x86/include/asm/olpc_ofw.h +++ b/arch/x86/include/asm/olpc_ofw.h @@ -28,4 +28,8 @@ static inline void setup_olpc_ofw_pgd(void) { } #endif /* !CONFIG_OLPC_OPENFIRMWARE */ +#ifdef CONFIG_PROC_DEVICETREE +extern void olpc_prom_build_devicetree(void); +#endif /* CONFIG_PROC_DEVICETREE */ + #endif /* _ASM_X86_OLPC_OFW_H */ diff --git a/arch/x86/include/asm/prom.h b/arch/x86/include/asm/prom.h new file mode 100644 index 0000000..b4ec95f --- /dev/null +++ b/arch/x86/include/asm/prom.h @@ -0,0 +1 @@ +/* dummy prom.h; here to make linux/of.h's #includes happy */ diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 0925676..3d7e535 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -105,6 +105,7 @@ scx200-y += scx200_32.o obj-$(CONFIG_OLPC) += olpc.o obj-$(CONFIG_OLPC_OPENFIRMWARE) += olpc_ofw.o +obj-$(CONFIG_PROC_DEVICETREE) += olpc_prom.o obj-$(CONFIG_X86_MRST) += mrst.o microcode-y := microcode_core.o diff --git a/arch/x86/kernel/olpc_ofw.c b/arch/x86/kernel/olpc_ofw.c index 3218aa7..6c4d243 100644 --- a/arch/x86/kernel/olpc_ofw.c +++ b/arch/x86/kernel/olpc_ofw.c @@ -1,5 +1,7 @@ #include <linux/kernel.h> #include <linux/module.h> +#include <linux/of.h> +#include <linux/of_pdt.h> #include <linux/init.h> #include <asm/page.h> #include <asm/setup.h> @@ -38,6 +40,12 @@ void __init setup_olpc_ofw_pgd(void) /* implicit optimization barrier here due to uninline function return */ early_iounmap(base, sizeof(olpc_ofw_pgd) * PTRS_PER_PGD); + +#ifdef CONFIG_PROC_DEVICETREE + /* OFW set up succesfully; use it for the device tree */ + of_pdt_init_devicetree = olpc_prom_build_devicetree; +#endif + } int __olpc_ofw(const char *name, int nr_args, const void **args, int nr_res, diff --git a/arch/x86/kernel/olpc_prom.c b/arch/x86/kernel/olpc_prom.c new file mode 100644 index 0000000..fb04d8a --- /dev/null +++ b/arch/x86/kernel/olpc_prom.c @@ -0,0 +1,152 @@ +/* + * olpc_prom.c: OLPC-specific OFW device tree support code. + * + * Paul Mackerras August 1996. + * Copyright (C) 1996-2005 Paul Mackerras. + * + * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner. + * {engebret|bergner}@us.ibm.com + * + * Adapted for sparc by David S. Miller davem@davemloft.net + * Adapted for x86/OLPC by Andres Salomon <dilinger@queued.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/of_pdt.h> +#include <asm/olpc_ofw.h> + +static phandle __init olpc_prom_getsibling(phandle node) +{ + const void *args[] = { (void *)node }; + void *res[] = { &node }; + + if (node == -1) + return 0; + + if (olpc_ofw("peer", args, res) || node == -1) + return 0; + + return node; +} + +static phandle __init olpc_prom_getchild(phandle node) +{ + const void *args[] = { (void *)node }; + void *res[] = { &node }; + + if (node == -1) + return 0; + + if (olpc_ofw("child", args, res) || node == -1) { + pr_err("PROM: %s: fetching child failed!\n", __func__); + return 0; + } + + return node; +} + +static int __init olpc_prom_getproplen(phandle node, const char *prop) +{ + const void *args[] = { (void *)node, prop }; + int len; + void *res[] = { &len }; + + if (node == -1) + return -1; + + if (olpc_ofw("getproplen", args, res)) { + pr_err("PROM: %s: getproplen failed!\n", __func__); + return -1; + } + + return len; +} + +static int __init olpc_prom_getproperty(phandle node, const char *prop, + char *buf, int bufsize) +{ + int plen; + + plen = olpc_prom_getproplen(node, prop); + if (plen > bufsize || plen < 1) + return -1; + else { + const void *args[] = { (void *)node, prop, buf, (void *)plen }; + void *res[] = { &plen }; + + if (olpc_ofw("getprop", args, res)) { + pr_err("PROM: %s: getprop failed!\n", __func__); + return -1; + } + } + + return plen; +} + +static int __init olpc_prom_nextprop(phandle node, const char *prev, char *buf) +{ + const void *args[] = { (void *)node, prev, buf }; + int success; + void *res[] = { &success }; + + buf[0] = '\0'; + + if (node == -1) + return -1; + + if (olpc_ofw("nextprop", args, res) || success != 1) + return -1; + + return 0; +} + +static int __init olpc_prom_pkg2path(phandle node, char *buf, + const int buflen, int *len) +{ + const void *args[] = { (void *)node, buf, (void *)buflen }; + void *res[] = { len }; + + if (node == -1) + return -1; + + if (olpc_ofw("package-to-path", args, res) || *len < 1) + return -1; + + return 0; +} + +void * __init prom_early_alloc(unsigned long size) +{ + /* this is called late enough that we can alloc normally */ + return kzalloc(size, GFP_KERNEL); +} + +static struct of_pdt_ops prom_olpc_ops __initdata = { + .nextprop = olpc_prom_nextprop, + .getproplen = olpc_prom_getproplen, + .getproperty = olpc_prom_getproperty, + .getchild = olpc_prom_getchild, + .getsibling = olpc_prom_getsibling, + .pkg2path = olpc_prom_pkg2path, +}; + +void __init olpc_prom_build_devicetree(void) +{ + phandle root; + + root = olpc_prom_getsibling(0); + if (root < 0) { + pr_err("PROM: unable to get root node from OFW!\n"); + return; + } + of_pdt_build_devicetree(root, &prom_olpc_ops); +} diff --git a/drivers/of/pdt.c b/drivers/of/pdt.c index 28295d0..07e3daa 100644 --- a/drivers/of/pdt.c +++ b/drivers/of/pdt.c @@ -29,6 +29,8 @@ static struct of_pdt_ops *of_pdt_prom_ops __initdata; void __initdata (*of_pdt_build_more)(struct device_node *dp, struct device_node ***nextp); +void __initdata (*of_pdt_init_devicetree)(void); + #if defined(CONFIG_SPARC) unsigned int of_pdt_unique_id __initdata; diff --git a/fs/proc/proc_devtree.c b/fs/proc/proc_devtree.c index d9396a4..9779039 100644 --- a/fs/proc/proc_devtree.c +++ b/fs/proc/proc_devtree.c @@ -11,6 +11,7 @@ #include <linux/stat.h> #include <linux/string.h> #include <linux/of.h> +#include <linux/of_pdt.h> #include <linux/module.h> #include <linux/slab.h> #include <asm/prom.h> @@ -228,6 +229,9 @@ void __init proc_device_tree_init(void) { struct device_node *root; + if (of_pdt_init_devicetree) + of_pdt_init_devicetree(); + proc_device_tree = proc_mkdir("device-tree", NULL); if (proc_device_tree == NULL) return; diff --git a/include/linux/of_pdt.h b/include/linux/of_pdt.h index 9945e58..b4bd0ee 100644 --- a/include/linux/of_pdt.h +++ b/include/linux/of_pdt.h @@ -38,6 +38,7 @@ extern void *prom_early_alloc(unsigned long size); /* for building the device tree */ extern void of_pdt_build_devicetree(phandle root_node, struct of_pdt_ops *ops); +extern void (*of_pdt_init_devicetree)(void); extern void (*of_pdt_build_more)(struct device_node *dp, struct device_node ***nextp);
Make use of PROC_DEVICETREE to export the tree, and sparc's PROMTREE code to call into OLPC's Open Firmware to build the tree. This also adds an init hook to proc_device_tree_init so that we can ensure the device tree has been built prior to the proc_root_init stuff attempting to populate /proc/device-tree. Signed-off-by: Andres Salomon <dilinger@queued.net> --- arch/x86/Kconfig | 2 + arch/x86/include/asm/olpc_ofw.h | 4 + arch/x86/include/asm/prom.h | 1 + arch/x86/kernel/Makefile | 1 + arch/x86/kernel/olpc_ofw.c | 8 ++ arch/x86/kernel/olpc_prom.c | 152 +++++++++++++++++++++++++++++++++++++++ drivers/of/pdt.c | 2 + fs/proc/proc_devtree.c | 4 + include/linux/of_pdt.h | 1 + 9 files changed, 175 insertions(+), 0 deletions(-) create mode 100644 arch/x86/include/asm/prom.h create mode 100644 arch/x86/kernel/olpc_prom.c