Message ID | 1477644996-23990-1-git-send-email-caoj.fnst@cn.fujitsu.com |
---|---|
State | New |
Headers | show |
28.10.2016 11:56, Cao jin wrote: > Also refactor a little bit for readability See comments below... > Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> > --- > util/mmap-alloc.c | 17 ++++++++--------- > 1 file changed, 8 insertions(+), 9 deletions(-) > > diff --git a/util/mmap-alloc.c b/util/mmap-alloc.c > index 5a85aa3..2f55f5e 100644 > --- a/util/mmap-alloc.c > +++ b/util/mmap-alloc.c > @@ -12,6 +12,7 @@ > > #include "qemu/osdep.h" > #include "qemu/mmap-alloc.h" > +#include "qemu/host-utils.h" > > #define HUGETLBFS_MAGIC 0x958458f6 > > @@ -61,18 +62,18 @@ void *qemu_ram_mmap(int fd, size_t size, size_t align, bool shared) > #else > void *ptr = mmap(0, total, PROT_NONE, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0); > #endif > - size_t offset = QEMU_ALIGN_UP((uintptr_t)ptr, align) - (uintptr_t)ptr; > + size_t offset; > void *ptr1; > > if (ptr == MAP_FAILED) { > return MAP_FAILED; > } > > - /* Make sure align is a power of 2 */ > - assert(!(align & (align - 1))); > + assert(is_power_of_2(align)); > /* Always align to host page size */ > assert(align >= getpagesize()); > > + offset = QEMU_ALIGN_UP((uintptr_t)ptr, align) - (uintptr_t)ptr; > ptr1 = mmap(ptr + offset, size, PROT_READ | PROT_WRITE, > MAP_FIXED | > (fd == -1 ? MAP_ANONYMOUS : 0) | > @@ -83,22 +84,20 @@ void *qemu_ram_mmap(int fd, size_t size, size_t align, bool shared) > return MAP_FAILED; > } > > - ptr += offset; > - total -= offset; > - > if (offset > 0) { > - munmap(ptr - offset, offset); > + munmap(ptr, offset); > } > > /* > * Leave a single PROT_NONE page allocated after the RAM block, to serve as > * a guard page guarding against potential buffer overflows. > */ > + total -= offset; > if (total > size + getpagesize()) { > - munmap(ptr + size + getpagesize(), total - size - getpagesize()); > + munmap(ptr1 + size + getpagesize(), total - size - getpagesize()); > } > > - return ptr; > + return ptr1; Why did you change ptr to ptr1 here and above? On linux, mmap(2) manpage says that address serves as hint, and the system create the mapping at a nearby page boundary. Generally, this address is just a hint. So I'm not really sure if this code is actually right.. :) At the very least, your commit comment is a bit misleading, as it says about readability, but it also MAY change semantics. Maybe just move BOTH "ptr+=, total-=" parts down the line and keep using ptr instead of ptr1? It'd be very good, in my opinion, to document how this whole thing is supposed to work :) Thanks, /mjt
On 10/28/2016 10:22 PM, Michael Tokarev wrote: > 28.10.2016 11:56, Cao jin wrote: >> Also refactor a little bit for readability > > See comments below... > >> Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> >> --- >> util/mmap-alloc.c | 17 ++++++++--------- >> 1 file changed, 8 insertions(+), 9 deletions(-) >> >> diff --git a/util/mmap-alloc.c b/util/mmap-alloc.c >> index 5a85aa3..2f55f5e 100644 >> --- a/util/mmap-alloc.c >> +++ b/util/mmap-alloc.c >> @@ -12,6 +12,7 @@ >> >> #include "qemu/osdep.h" >> #include "qemu/mmap-alloc.h" >> +#include "qemu/host-utils.h" >> >> #define HUGETLBFS_MAGIC 0x958458f6 >> >> @@ -61,18 +62,18 @@ void *qemu_ram_mmap(int fd, size_t size, size_t align, bool shared) >> #else >> void *ptr = mmap(0, total, PROT_NONE, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0); >> #endif >> - size_t offset = QEMU_ALIGN_UP((uintptr_t)ptr, align) - (uintptr_t)ptr; >> + size_t offset; >> void *ptr1; >> >> if (ptr == MAP_FAILED) { >> return MAP_FAILED; >> } >> >> - /* Make sure align is a power of 2 */ >> - assert(!(align & (align - 1))); >> + assert(is_power_of_2(align)); >> /* Always align to host page size */ >> assert(align >= getpagesize()); >> >> + offset = QEMU_ALIGN_UP((uintptr_t)ptr, align) - (uintptr_t)ptr; >> ptr1 = mmap(ptr + offset, size, PROT_READ | PROT_WRITE, >> MAP_FIXED | >> (fd == -1 ? MAP_ANONYMOUS : 0) | >> @@ -83,22 +84,20 @@ void *qemu_ram_mmap(int fd, size_t size, size_t align, bool shared) >> return MAP_FAILED; >> } >> >> - ptr += offset; >> - total -= offset; >> - >> if (offset > 0) { >> - munmap(ptr - offset, offset); >> + munmap(ptr, offset); >> } >> >> /* >> * Leave a single PROT_NONE page allocated after the RAM block, to serve as >> * a guard page guarding against potential buffer overflows. >> */ >> + total -= offset; >> if (total > size + getpagesize()) { >> - munmap(ptr + size + getpagesize(), total - size - getpagesize()); >> + munmap(ptr1 + size + getpagesize(), total - size - getpagesize()); >> } >> >> - return ptr; >> + return ptr1; > > Why did you change ptr to ptr1 here and above? Because, I think there always is: ptr + offset == ptr1 > > On linux, mmap(2) manpage says that address serves as hint, and the > system create the mapping at a nearby page boundary. Generally, this > address is just a hint. So I'm not really sure if this code is actually > right.. :) > Yes, but the 2nd mmap used MAP_FIXED, which the manpage says: /Don't interpret addr as a hint: place the mapping at exactly that/ /address. addr must be a multiple of the page size/ /If the specified address cannot be used, mmap() will fail/ > At the very least, your commit comment is a bit misleading, as it says > about readability, but it also MAY change semantics. > I don't think so, one just need dig a little deeper:) > Maybe just move BOTH "ptr+=, total-=" parts down the line and keep > using ptr instead of ptr1? > > It'd be very good, in my opinion, to document how this whole thing > is supposed to work :) > the change is just some simple arithmetic operation, I think it is little difficult for me to find a decent description. Hope this could also got other maintainer's help, review, or ack > Thanks, > > /mjt > > > . >
On 31.10.2016 04:57, Cao jin wrote: > > > On 10/28/2016 10:22 PM, Michael Tokarev wrote: >> 28.10.2016 11:56, Cao jin wrote: >>> Also refactor a little bit for readability >> >> See comments below... >> >>> Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> >>> --- >>> util/mmap-alloc.c | 17 ++++++++--------- >>> 1 file changed, 8 insertions(+), 9 deletions(-) >>> >>> diff --git a/util/mmap-alloc.c b/util/mmap-alloc.c >>> index 5a85aa3..2f55f5e 100644 >>> --- a/util/mmap-alloc.c >>> +++ b/util/mmap-alloc.c >>> @@ -12,6 +12,7 @@ >>> >>> #include "qemu/osdep.h" >>> #include "qemu/mmap-alloc.h" >>> +#include "qemu/host-utils.h" >>> >>> #define HUGETLBFS_MAGIC 0x958458f6 >>> >>> @@ -61,18 +62,18 @@ void *qemu_ram_mmap(int fd, size_t size, size_t >>> align, bool shared) >>> #else >>> void *ptr = mmap(0, total, PROT_NONE, MAP_ANONYMOUS | >>> MAP_PRIVATE, -1, 0); >>> #endif >>> - size_t offset = QEMU_ALIGN_UP((uintptr_t)ptr, align) - >>> (uintptr_t)ptr; >>> + size_t offset; >>> void *ptr1; >>> >>> if (ptr == MAP_FAILED) { >>> return MAP_FAILED; >>> } >>> >>> - /* Make sure align is a power of 2 */ >>> - assert(!(align & (align - 1))); >>> + assert(is_power_of_2(align)); >>> /* Always align to host page size */ >>> assert(align >= getpagesize()); >>> >>> + offset = QEMU_ALIGN_UP((uintptr_t)ptr, align) - (uintptr_t)ptr; >>> ptr1 = mmap(ptr + offset, size, PROT_READ | PROT_WRITE, >>> MAP_FIXED | >>> (fd == -1 ? MAP_ANONYMOUS : 0) | >>> @@ -83,22 +84,20 @@ void *qemu_ram_mmap(int fd, size_t size, size_t >>> align, bool shared) >>> return MAP_FAILED; >>> } >>> >>> - ptr += offset; >>> - total -= offset; >>> - >>> if (offset > 0) { >>> - munmap(ptr - offset, offset); >>> + munmap(ptr, offset); >>> } >>> >>> /* >>> * Leave a single PROT_NONE page allocated after the RAM block, >>> to serve as >>> * a guard page guarding against potential buffer overflows. >>> */ >>> + total -= offset; >>> if (total > size + getpagesize()) { >>> - munmap(ptr + size + getpagesize(), total - size - >>> getpagesize()); >>> + munmap(ptr1 + size + getpagesize(), total - size - >>> getpagesize()); >>> } >>> >>> - return ptr; >>> + return ptr1; >> >> Why did you change ptr to ptr1 here and above? > > Because, I think there always is: ptr + offset == ptr1 > >> >> On linux, mmap(2) manpage says that address serves as hint, and the >> system create the mapping at a nearby page boundary. Generally, this >> address is just a hint. So I'm not really sure if this code is actually >> right.. :) >> > > Yes, but the 2nd mmap used MAP_FIXED, which the manpage says: > > /Don't interpret addr as a hint: place the mapping at exactly that/ > /address. addr must be a multiple of the page size/ > /If the specified address cannot be used, mmap() will fail/ > >> At the very least, your commit comment is a bit misleading, as it says >> about readability, but it also MAY change semantics. >> > > I don't think so, one just need dig a little deeper:) > >> Maybe just move BOTH "ptr+=, total-=" parts down the line and keep >> using ptr instead of ptr1? >> >> It'd be very good, in my opinion, to document how this whole thing >> is supposed to work :) >> > > the change is just some simple arithmetic operation, I think it is > little difficult for me to find a decent description. I originally had similar problems as Michael understanding your changes to ptr / ptr1 ... so you should likely at add the information with MAP_FIXED etc. to the patch description at least, I think. It's maybe also cleaner if you split your patch into two parts, first patch to fix the parameter checking, and second patch to change the ptr1 stuff. That way the later patch could also be easier reverted in case there are problems with that. Thomas
On 10/31/2016 03:32 PM, Thomas Huth wrote: > On 31.10.2016 04:57, Cao jin wrote: >>> >>> Why did you change ptr to ptr1 here and above? >> >> Because, I think there always is: ptr + offset == ptr1 >> >>> >>> On linux, mmap(2) manpage says that address serves as hint, and the >>> system create the mapping at a nearby page boundary. Generally, this >>> address is just a hint. So I'm not really sure if this code is actually >>> right.. :) >>> >> >> Yes, but the 2nd mmap used MAP_FIXED, which the manpage says: >> >> /Don't interpret addr as a hint: place the mapping at exactly that/ >> /address. addr must be a multiple of the page size/ >> /If the specified address cannot be used, mmap() will fail/ >> >>> At the very least, your commit comment is a bit misleading, as it says >>> about readability, but it also MAY change semantics. >>> >> >> I don't think so, one just need dig a little deeper:) >> >>> Maybe just move BOTH "ptr+=, total-=" parts down the line and keep >>> using ptr instead of ptr1? >>> >>> It'd be very good, in my opinion, to document how this whole thing >>> is supposed to work :) >>> >> >> the change is just some simple arithmetic operation, I think it is >> little difficult for me to find a decent description. > > I originally had similar problems as Michael understanding your changes > to ptr / ptr1 ... so you should likely at add the information with > MAP_FIXED etc. to the patch description at least, I think. > > It's maybe also cleaner if you split your patch into two parts, first > patch to fix the parameter checking, and second patch to change the ptr1 > stuff. That way the later patch could also be easier reverted in case > there are problems with that. > > Thomas > Oh, I didn't realize it would confuse people so easy, seems it actually did:( Readability is kind of personal taste thing, generally, I woundn't send a patch only care readability which maybe controversial, so I am not sure this one worth the trouble to split the patch, but if everyone want it, I am pleased to do it. I was hoping someone(maybe author) could give a ack, or point out the error I made. Will try to document it in next version.
diff --git a/util/mmap-alloc.c b/util/mmap-alloc.c index 5a85aa3..2f55f5e 100644 --- a/util/mmap-alloc.c +++ b/util/mmap-alloc.c @@ -12,6 +12,7 @@ #include "qemu/osdep.h" #include "qemu/mmap-alloc.h" +#include "qemu/host-utils.h" #define HUGETLBFS_MAGIC 0x958458f6 @@ -61,18 +62,18 @@ void *qemu_ram_mmap(int fd, size_t size, size_t align, bool shared) #else void *ptr = mmap(0, total, PROT_NONE, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0); #endif - size_t offset = QEMU_ALIGN_UP((uintptr_t)ptr, align) - (uintptr_t)ptr; + size_t offset; void *ptr1; if (ptr == MAP_FAILED) { return MAP_FAILED; } - /* Make sure align is a power of 2 */ - assert(!(align & (align - 1))); + assert(is_power_of_2(align)); /* Always align to host page size */ assert(align >= getpagesize()); + offset = QEMU_ALIGN_UP((uintptr_t)ptr, align) - (uintptr_t)ptr; ptr1 = mmap(ptr + offset, size, PROT_READ | PROT_WRITE, MAP_FIXED | (fd == -1 ? MAP_ANONYMOUS : 0) | @@ -83,22 +84,20 @@ void *qemu_ram_mmap(int fd, size_t size, size_t align, bool shared) return MAP_FAILED; } - ptr += offset; - total -= offset; - if (offset > 0) { - munmap(ptr - offset, offset); + munmap(ptr, offset); } /* * Leave a single PROT_NONE page allocated after the RAM block, to serve as * a guard page guarding against potential buffer overflows. */ + total -= offset; if (total > size + getpagesize()) { - munmap(ptr + size + getpagesize(), total - size - getpagesize()); + munmap(ptr1 + size + getpagesize(), total - size - getpagesize()); } - return ptr; + return ptr1; } void qemu_ram_munmap(void *ptr, size_t size)
Also refactor a little bit for readability Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> --- util/mmap-alloc.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-)