| Message ID | 20160809145517.22815-2-afd@ti.com |
|---|---|
| State | Needs Review / ACK |
| Headers | show |
On Tue, 09 Aug 2016, Andrew F. Davis wrote: > The TI SM-USB-DIG is a USB to SPI/I2C/1Wire/GPIO adapter. > Add MFD core support. > > Signed-off-by: Andrew F. Davis <afd@ti.com> > --- > drivers/mfd/Kconfig | 9 +++ > drivers/mfd/Makefile | 2 + > drivers/mfd/ti-smusbdig.c | 138 ++++++++++++++++++++++++++++++++++++++++ > include/linux/mfd/ti-smusbdig.h | 75 ++++++++++++++++++++++ > 4 files changed, 224 insertions(+) > create mode 100644 drivers/mfd/ti-smusbdig.c > create mode 100644 include/linux/mfd/ti-smusbdig.h Still requires a DT Ack. Please ping the relevant guys.
On 08/09/2016 10:27 AM, Lee Jones wrote: > On Tue, 09 Aug 2016, Andrew F. Davis wrote: > >> The TI SM-USB-DIG is a USB to SPI/I2C/1Wire/GPIO adapter. >> Add MFD core support. >> >> Signed-off-by: Andrew F. Davis <afd@ti.com> >> --- >> drivers/mfd/Kconfig | 9 +++ >> drivers/mfd/Makefile | 2 + >> drivers/mfd/ti-smusbdig.c | 138 ++++++++++++++++++++++++++++++++++++++++ >> include/linux/mfd/ti-smusbdig.h | 75 ++++++++++++++++++++++ >> 4 files changed, 224 insertions(+) >> create mode 100644 drivers/mfd/ti-smusbdig.c >> create mode 100644 include/linux/mfd/ti-smusbdig.h > > Still requires a DT Ack. > > Please ping the relevant guys. > This driver doesn't touch DT. If you meant USB, could you give me a hint as to who needs to ack drivers that communicate over USB? -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, 16 Aug 2016, Andrew F. Davis wrote: > On 08/09/2016 10:27 AM, Lee Jones wrote: > > On Tue, 09 Aug 2016, Andrew F. Davis wrote: > > > >> The TI SM-USB-DIG is a USB to SPI/I2C/1Wire/GPIO adapter. > >> Add MFD core support. > >> > >> Signed-off-by: Andrew F. Davis <afd@ti.com> > >> --- > >> drivers/mfd/Kconfig | 9 +++ > >> drivers/mfd/Makefile | 2 + > >> drivers/mfd/ti-smusbdig.c | 138 ++++++++++++++++++++++++++++++++++++++++ > >> include/linux/mfd/ti-smusbdig.h | 75 ++++++++++++++++++++++ > >> 4 files changed, 224 insertions(+) > >> create mode 100644 drivers/mfd/ti-smusbdig.c > >> create mode 100644 include/linux/mfd/ti-smusbdig.h > > > > Still requires a DT Ack. > > > > Please ping the relevant guys. > > > > This driver doesn't touch DT. > > If you meant USB, could you give me a hint as to who needs to ack > drivers that communicate over USB? Ah yes, my bad. I was on auto-pilot, since that's what I usually find myself asking for. W.R.T. the USB Ack, Johan (now CC'ed) has been pretty helpful in the past.
On Tue, Aug 09, 2016 at 09:55:16AM -0500, Andrew F. Davis wrote: > The TI SM-USB-DIG is a USB to SPI/I2C/1Wire/GPIO adapter. > Add MFD core support. > > Signed-off-by: Andrew F. Davis <afd@ti.com> > --- > drivers/mfd/Kconfig | 9 +++ > drivers/mfd/Makefile | 2 + > drivers/mfd/ti-smusbdig.c | 138 ++++++++++++++++++++++++++++++++++++++++ > include/linux/mfd/ti-smusbdig.h | 75 ++++++++++++++++++++++ > 4 files changed, 224 insertions(+) > create mode 100644 drivers/mfd/ti-smusbdig.c > create mode 100644 include/linux/mfd/ti-smusbdig.h > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index 2d1fb64..0b63431 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -1387,6 +1387,15 @@ config MFD_LM3533 > additional drivers must be enabled in order to use the LED, > backlight or ambient-light-sensor functionality of the device. > > +config MFD_TI_SMUSBDIG > + tristate "Texas Instruments SM-USB-DIG interface adapter" > + depends on USB > + select MFD_CORE > + help > + Support for the TI SM-USB-DIG USB to SPI/I2C/1Wire/GPIO adapter. > + Additional drivers such as SPI_TI_SMUSBDIG, I2C_TI_SMUSBDIG, etc. must > + be enabled in order to use the functionality of the device. > + > config MFD_TIMBERDALE > tristate "Timberdale FPGA" > select MFD_CORE > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile > index 2ba3ba3..aa2845e 100644 > --- a/drivers/mfd/Makefile > +++ b/drivers/mfd/Makefile > @@ -68,6 +68,8 @@ obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o > wm8994-objs := wm8994-core.o wm8994-irq.o wm8994-regmap.o > obj-$(CONFIG_MFD_WM8994) += wm8994.o > > +obj-$(CONFIG_MFD_TI_SMUSBDIG) += ti-smusbdig.o > + > obj-$(CONFIG_TPS6105X) += tps6105x.o > obj-$(CONFIG_TPS65010) += tps65010.o > obj-$(CONFIG_TPS6507X) += tps6507x.o > diff --git a/drivers/mfd/ti-smusbdig.c b/drivers/mfd/ti-smusbdig.c > new file mode 100644 > index 0000000..19f48c6 > --- /dev/null > +++ b/drivers/mfd/ti-smusbdig.c > @@ -0,0 +1,138 @@ > +/* > + * MFD Core driver for TI SM-USB-DIG > + * > + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ > + * Andrew F. Davis <afd@ti.com> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + * This program is distributed "as is" WITHOUT ANY WARRANTY of any > + * kind, whether expressed or implied; without even the implied warranty > + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License version 2 for more details. > + */ > + > +#include <linux/mfd/core.h> > +#include <linux/mfd/ti-smusbdig.h> > +#include <linux/module.h> > +#include <linux/usb.h> > + > +#define TI_USB_VENDOR_ID 0x0451 > +#define TI_USB_DEVICE_ID_SM_USB_DIG 0x2f90 > + > +#define TI_SMUSBDIG_USB_TIMEOUT_MS 1000 > + > +struct ti_smusbdig_device { > + struct usb_device *usb_dev; > + struct usb_interface *interface; > +}; > + > +int ti_smusbdig_xfer(struct ti_smusbdig_device *ti_smusbdig, > + u8 *buffer, int size) > +{ > + struct device *dev = &ti_smusbdig->interface->dev; > + int actual_length, ret; > + > + if (!ti_smusbdig || !buffer || size <= 0) > + return -EINVAL; Why not use size_t and skip the negative size check? > + > + ret = usb_interrupt_msg(ti_smusbdig->usb_dev, > + usb_sndctrlpipe(ti_smusbdig->usb_dev, 1), This should be usb_sndintpipe. Hardcoding the EP number isn't that nice, consider using a define or determine and store it at probe. > + buffer, size, &actual_length, > + TI_SMUSBDIG_USB_TIMEOUT_MS); > + if (ret) { > + dev_err(dev, "USB transaction failed\n"); Please include the errno in your error messages (e.g. "failed: %d\n"). You also need to check for short transfers. > + return ret; > + } > + > + ret = usb_interrupt_msg(ti_smusbdig->usb_dev, > + usb_rcvctrlpipe(ti_smusbdig->usb_dev, 1), usb_rcvintpipe, same comment about hardcoded EP number. > + buffer, TI_SMUSBDIG_PACKET_SIZE, &actual_length, > + TI_SMUSBDIG_USB_TIMEOUT_MS); > + if (ret) { > + dev_err(dev, "USB transaction failed\n"); > + return ret; > + } What about the size of the received data? Don't you either need to check it against TI_SMUSBDIG_PACKET_SIZE or return the actual size read? > + > + return 0; > +} You also need to serialise access to the transfer function, or replies could potentially be mismatched. > +EXPORT_SYMBOL_GPL(ti_smusbdig_xfer); > + > +static const struct mfd_cell ti_smusbdig_mfd_cells[] = { > + { .name = "ti-sm-usb-dig-gpio", }, > + { .name = "ti-sm-usb-dig-i2c", }, > + { .name = "ti-sm-usb-dig-spi", }, > + { .name = "ti-sm-usb-dig-w1", }, > +}; > + > +static int ti_smusbdig_probe(struct usb_interface *interface, > + const struct usb_device_id *usb_id) > +{ > + struct usb_host_interface *hostif = interface->cur_altsetting; > + struct device *dev = &interface->dev; > + struct ti_smusbdig_device *ti_smusbdig; > + u8 buffer[TI_SMUSBDIG_PACKET_SIZE]; You must not use a stack-allocated buffer for DMA transfers (use kalloc here or in the transfer function). > + int ret; > + > + if (hostif->desc.bInterfaceNumber != 0 || > + hostif->desc.bNumEndpoints < 2) > + return -ENODEV; > + > + ti_smusbdig = devm_kzalloc(dev, sizeof(*ti_smusbdig), GFP_KERNEL); > + if (!ti_smusbdig) > + return -ENOMEM; > + > + ti_smusbdig->usb_dev = usb_get_dev(interface_to_usbdev(interface)); You must put the reference you acquire here in error paths and at disconnect. > + ti_smusbdig->interface = interface; > + usb_set_intfdata(interface, ti_smusbdig); > + > + buffer[0] = TI_SMUSBDIG_VERSION; > + ret = ti_smusbdig_xfer(ti_smusbdig, buffer, 1); > + if (ret) > + return ret; > + > + dev_info(dev, "TI SM-USB-DIG Version: %d.%02d Found\n", > + buffer[0], buffer[1]); > + > + /* Turn on power supply output */ > + buffer[0] = TI_SMUSBDIG_COMMAND; > + buffer[1] = TI_SMUSBDIG_COMMAND_DUTPOWERON; > + ret = ti_smusbdig_xfer(ti_smusbdig, buffer, 2); > + if (ret) > + return ret; > + > + dev_set_drvdata(dev, ti_smusbdig); > + ret = mfd_add_hotplug_devices(dev, ti_smusbdig_mfd_cells, > + ARRAY_SIZE(ti_smusbdig_mfd_cells)); > + if (ret) { > + dev_err(dev, "unable to add MFD devices\n"); > + return ret; > + } > + > + return 0; > +} > + > +static void ti_smusbdig_disconnect(struct usb_interface *interface) > +{ > + mfd_remove_devices(&interface->dev); > +} > + > +static const struct usb_device_id ti_smusbdig_id_table[] = { > + { USB_DEVICE(TI_USB_VENDOR_ID, TI_USB_DEVICE_ID_SM_USB_DIG) }, > + { /* sentinel */ } > +}; > +MODULE_DEVICE_TABLE(usb, ti_smusbdig_id_table); > + > +static struct usb_driver ti_smusbdig_driver = { > + .name = "ti-sm-usb-dig", > + .probe = ti_smusbdig_probe, > + .disconnect = ti_smusbdig_disconnect, > + .id_table = ti_smusbdig_id_table, > +}; > +module_usb_driver(ti_smusbdig_driver); > + > +MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>"); > +MODULE_DESCRIPTION("Core driver for TI SM-USB-DIG interface adapter"); > +MODULE_LICENSE("GPL v2"); > diff --git a/include/linux/mfd/ti-smusbdig.h b/include/linux/mfd/ti-smusbdig.h > new file mode 100644 > index 0000000..46fd2da > --- /dev/null > +++ b/include/linux/mfd/ti-smusbdig.h > @@ -0,0 +1,75 @@ > +/* > + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ > + * Andrew F. Davis <afd@ti.com> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + * This program is distributed "as is" WITHOUT ANY WARRANTY of any > + * kind, whether expressed or implied; without even the implied warranty > + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License version 2 for more details. > + */ > + > +#ifndef __LINUX_MFD_TI_SMUSBDIG_H > +#define __LINUX_MFD_TI_SMUSBDIG_H > + > +#define TI_SMUSBDIG_PACKET_SIZE 32 > +/* (packet size - packet header */ > +#define TI_SMUSBDIG_DATA_SIZE (TI_SMUSBDIG_PACKET_SIZE - 7) > + > +enum ti_smusbdig_function { > + TI_SMUSBDIG_SPI = 0x01, > + TI_SMUSBDIG_I2C = 0x02, > + TI_SMUSBDIG_1W = 0x03, > + TI_SMUSBDIG_COMMAND = 0x04, > + TI_SMUSBDIG_VERSION = 0x07, > +}; > + > +enum ti_smusbdig_sub_command { > + TI_SMUSBDIG_COMMAND_DUTPOWERON = 0x01, > + TI_SMUSBDIG_COMMAND_DUTPOWEROFF = 0x02, > +}; > + > +struct ti_smusbdig_packet { > + u8 function; > + u8 channel; > + u8 edge_polarity; > + u8 num_commands; > + u8 is_command_mask[3]; > + u8 data[TI_SMUSBDIG_DATA_SIZE]; > +} __packed; So this packet format isn't used for all functions (e.g. TI_SMUSBDIG_COMMAND above). Is the protocol documented somewhere? Making the code and header more self-contained would be good, but you could also provide a link to the documentation. Thanks, Johan -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 2d1fb64..0b63431 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1387,6 +1387,15 @@ config MFD_LM3533 additional drivers must be enabled in order to use the LED, backlight or ambient-light-sensor functionality of the device. +config MFD_TI_SMUSBDIG + tristate "Texas Instruments SM-USB-DIG interface adapter" + depends on USB + select MFD_CORE + help + Support for the TI SM-USB-DIG USB to SPI/I2C/1Wire/GPIO adapter. + Additional drivers such as SPI_TI_SMUSBDIG, I2C_TI_SMUSBDIG, etc. must + be enabled in order to use the functionality of the device. + config MFD_TIMBERDALE tristate "Timberdale FPGA" select MFD_CORE diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 2ba3ba3..aa2845e 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -68,6 +68,8 @@ obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o wm8994-objs := wm8994-core.o wm8994-irq.o wm8994-regmap.o obj-$(CONFIG_MFD_WM8994) += wm8994.o +obj-$(CONFIG_MFD_TI_SMUSBDIG) += ti-smusbdig.o + obj-$(CONFIG_TPS6105X) += tps6105x.o obj-$(CONFIG_TPS65010) += tps65010.o obj-$(CONFIG_TPS6507X) += tps6507x.o diff --git a/drivers/mfd/ti-smusbdig.c b/drivers/mfd/ti-smusbdig.c new file mode 100644 index 0000000..19f48c6 --- /dev/null +++ b/drivers/mfd/ti-smusbdig.c @@ -0,0 +1,138 @@ +/* + * MFD Core driver for TI SM-USB-DIG + * + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * Andrew F. Davis <afd@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether expressed or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License version 2 for more details. + */ + +#include <linux/mfd/core.h> +#include <linux/mfd/ti-smusbdig.h> +#include <linux/module.h> +#include <linux/usb.h> + +#define TI_USB_VENDOR_ID 0x0451 +#define TI_USB_DEVICE_ID_SM_USB_DIG 0x2f90 + +#define TI_SMUSBDIG_USB_TIMEOUT_MS 1000 + +struct ti_smusbdig_device { + struct usb_device *usb_dev; + struct usb_interface *interface; +}; + +int ti_smusbdig_xfer(struct ti_smusbdig_device *ti_smusbdig, + u8 *buffer, int size) +{ + struct device *dev = &ti_smusbdig->interface->dev; + int actual_length, ret; + + if (!ti_smusbdig || !buffer || size <= 0) + return -EINVAL; + + ret = usb_interrupt_msg(ti_smusbdig->usb_dev, + usb_sndctrlpipe(ti_smusbdig->usb_dev, 1), + buffer, size, &actual_length, + TI_SMUSBDIG_USB_TIMEOUT_MS); + if (ret) { + dev_err(dev, "USB transaction failed\n"); + return ret; + } + + ret = usb_interrupt_msg(ti_smusbdig->usb_dev, + usb_rcvctrlpipe(ti_smusbdig->usb_dev, 1), + buffer, TI_SMUSBDIG_PACKET_SIZE, &actual_length, + TI_SMUSBDIG_USB_TIMEOUT_MS); + if (ret) { + dev_err(dev, "USB transaction failed\n"); + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(ti_smusbdig_xfer); + +static const struct mfd_cell ti_smusbdig_mfd_cells[] = { + { .name = "ti-sm-usb-dig-gpio", }, + { .name = "ti-sm-usb-dig-i2c", }, + { .name = "ti-sm-usb-dig-spi", }, + { .name = "ti-sm-usb-dig-w1", }, +}; + +static int ti_smusbdig_probe(struct usb_interface *interface, + const struct usb_device_id *usb_id) +{ + struct usb_host_interface *hostif = interface->cur_altsetting; + struct device *dev = &interface->dev; + struct ti_smusbdig_device *ti_smusbdig; + u8 buffer[TI_SMUSBDIG_PACKET_SIZE]; + int ret; + + if (hostif->desc.bInterfaceNumber != 0 || + hostif->desc.bNumEndpoints < 2) + return -ENODEV; + + ti_smusbdig = devm_kzalloc(dev, sizeof(*ti_smusbdig), GFP_KERNEL); + if (!ti_smusbdig) + return -ENOMEM; + + ti_smusbdig->usb_dev = usb_get_dev(interface_to_usbdev(interface)); + ti_smusbdig->interface = interface; + usb_set_intfdata(interface, ti_smusbdig); + + buffer[0] = TI_SMUSBDIG_VERSION; + ret = ti_smusbdig_xfer(ti_smusbdig, buffer, 1); + if (ret) + return ret; + + dev_info(dev, "TI SM-USB-DIG Version: %d.%02d Found\n", + buffer[0], buffer[1]); + + /* Turn on power supply output */ + buffer[0] = TI_SMUSBDIG_COMMAND; + buffer[1] = TI_SMUSBDIG_COMMAND_DUTPOWERON; + ret = ti_smusbdig_xfer(ti_smusbdig, buffer, 2); + if (ret) + return ret; + + dev_set_drvdata(dev, ti_smusbdig); + ret = mfd_add_hotplug_devices(dev, ti_smusbdig_mfd_cells, + ARRAY_SIZE(ti_smusbdig_mfd_cells)); + if (ret) { + dev_err(dev, "unable to add MFD devices\n"); + return ret; + } + + return 0; +} + +static void ti_smusbdig_disconnect(struct usb_interface *interface) +{ + mfd_remove_devices(&interface->dev); +} + +static const struct usb_device_id ti_smusbdig_id_table[] = { + { USB_DEVICE(TI_USB_VENDOR_ID, TI_USB_DEVICE_ID_SM_USB_DIG) }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(usb, ti_smusbdig_id_table); + +static struct usb_driver ti_smusbdig_driver = { + .name = "ti-sm-usb-dig", + .probe = ti_smusbdig_probe, + .disconnect = ti_smusbdig_disconnect, + .id_table = ti_smusbdig_id_table, +}; +module_usb_driver(ti_smusbdig_driver); + +MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>"); +MODULE_DESCRIPTION("Core driver for TI SM-USB-DIG interface adapter"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/ti-smusbdig.h b/include/linux/mfd/ti-smusbdig.h new file mode 100644 index 0000000..46fd2da --- /dev/null +++ b/include/linux/mfd/ti-smusbdig.h @@ -0,0 +1,75 @@ +/* + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * Andrew F. Davis <afd@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether expressed or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License version 2 for more details. + */ + +#ifndef __LINUX_MFD_TI_SMUSBDIG_H +#define __LINUX_MFD_TI_SMUSBDIG_H + +#define TI_SMUSBDIG_PACKET_SIZE 32 +/* (packet size - packet header */ +#define TI_SMUSBDIG_DATA_SIZE (TI_SMUSBDIG_PACKET_SIZE - 7) + +enum ti_smusbdig_function { + TI_SMUSBDIG_SPI = 0x01, + TI_SMUSBDIG_I2C = 0x02, + TI_SMUSBDIG_1W = 0x03, + TI_SMUSBDIG_COMMAND = 0x04, + TI_SMUSBDIG_VERSION = 0x07, +}; + +enum ti_smusbdig_sub_command { + TI_SMUSBDIG_COMMAND_DUTPOWERON = 0x01, + TI_SMUSBDIG_COMMAND_DUTPOWEROFF = 0x02, +}; + +struct ti_smusbdig_packet { + u8 function; + u8 channel; + u8 edge_polarity; + u8 num_commands; + u8 is_command_mask[3]; + u8 data[TI_SMUSBDIG_DATA_SIZE]; +} __packed; + +static inline void +ti_smusbdig_packet_add_command(struct ti_smusbdig_packet *packet, int command) +{ + int num_commands = packet->num_commands; + int mask_number = num_commands / 8; + int mask_bit = num_commands % 8; + + if (num_commands >= TI_SMUSBDIG_DATA_SIZE) + return; + + packet->is_command_mask[mask_number] |= BIT(7 - mask_bit); + packet->data[num_commands] = command; + packet->num_commands++; +} + +static inline void +ti_smusbdig_packet_add_data(struct ti_smusbdig_packet *packet, u8 data) +{ + int num_commands = packet->num_commands; + + if (num_commands >= TI_SMUSBDIG_DATA_SIZE) + return; + + packet->data[num_commands] = data; + packet->num_commands++; +} + +struct ti_smusbdig_device; +int ti_smusbdig_xfer(struct ti_smusbdig_device *ti_smusbdig, + u8 *buffer, int size); + +#endif /* __LINUX_MFD_TI_SMUSBDIG_H */
The TI SM-USB-DIG is a USB to SPI/I2C/1Wire/GPIO adapter. Add MFD core support. Signed-off-by: Andrew F. Davis <afd@ti.com> --- drivers/mfd/Kconfig | 9 +++ drivers/mfd/Makefile | 2 + drivers/mfd/ti-smusbdig.c | 138 ++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/ti-smusbdig.h | 75 ++++++++++++++++++++++ 4 files changed, 224 insertions(+) create mode 100644 drivers/mfd/ti-smusbdig.c create mode 100644 include/linux/mfd/ti-smusbdig.h