Message ID | 1467272586-28761-2-git-send-email-florian.vaussard@heig-vd.ch |
---|---|
State | Not Applicable, archived |
Headers | show |
On 30/06/16 08:43, Florian Vaussard wrote: > Add the device tree documentation for all the supported parts. Mandatory > binding is the compatible string and the slave I2C address. > > Optional properties can be used to specify the Vcc / Vref regulators, as > well as the IRQ line if available. > > Acked-by: Rob Herring <robh@kernel.org> > Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch> Really small point, but typically author sign off goes first then acks etc that are gained at any intermediate states, then the sign off of whoever takes the patch and applies it (here, that's me). So it kind of communicates some idea of when in the process various tags were obtained. It's not a rule set in stone though so I'll be lazy and leave this as it is. Anyhow, great and applied to the togreg branch of iio.git initially pushed out as testing for the autobuilders to poke it (or not in the case of this docume Jonathan > --- > .../devicetree/bindings/iio/adc/max1363.txt | 63 ++++++++++++++++++++++ > 1 file changed, 63 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/max1363.txt > > diff --git a/Documentation/devicetree/bindings/iio/adc/max1363.txt b/Documentation/devicetree/bindings/iio/adc/max1363.txt > new file mode 100644 > index 0000000..94a9011 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/adc/max1363.txt > @@ -0,0 +1,63 @@ > +* Maxim 1x3x/136x/116xx Analog to Digital Converter (ADC) > + > +The node for this driver must be a child node of a I2C controller, hence > +all mandatory properties for your controller must be specified. See directory: > + > + Documentation/devicetree/bindings/i2c > + > +for more details. > + > +Required properties: > + - compatible: Should be one of > + "maxim,max1361" > + "maxim,max1362" > + "maxim,max1363" > + "maxim,max1364" > + "maxim,max1036" > + "maxim,max1037" > + "maxim,max1038" > + "maxim,max1039" > + "maxim,max1136" > + "maxim,max1137" > + "maxim,max1138" > + "maxim,max1139" > + "maxim,max1236" > + "maxim,max1237" > + "maxim,max1238" > + "maxim,max1239" > + "maxim,max11600" > + "maxim,max11601" > + "maxim,max11602" > + "maxim,max11603" > + "maxim,max11604" > + "maxim,max11605" > + "maxim,max11606" > + "maxim,max11607" > + "maxim,max11608" > + "maxim,max11609" > + "maxim,max11610" > + "maxim,max11611" > + "maxim,max11612" > + "maxim,max11613" > + "maxim,max11614" > + "maxim,max11615" > + "maxim,max11616" > + "maxim,max11617" > + "maxim,max11644" > + "maxim,max11645" > + "maxim,max11646" > + "maxim,max11647" > + - reg: Should contain the ADC I2C address > + > +Optional properties: > + - vcc-supply: phandle to the regulator that provides power to the ADC. > + - vref-supply: phandle to the regulator for ADC reference voltage. > + - interrupts: IRQ line for the ADC. If not used the driver will use > + polling. > + > +Example: > +adc: max11644@36 { > + compatible = "maxim,max11644"; > + reg = <0x36>; > + vref-supply = <&adc_vref>; > +}; > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Jonathan, On 07/03/2016 12:41 PM, Jonathan Cameron wrote: > On 30/06/16 08:43, Florian Vaussard wrote: >> Add the device tree documentation for all the supported parts. Mandatory >> binding is the compatible string and the slave I2C address. >> >> Optional properties can be used to specify the Vcc / Vref regulators, as >> well as the IRQ line if available. >> >> Acked-by: Rob Herring <robh@kernel.org> >> Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch> > Really small point, but typically author sign off goes first then acks etc > that are gained at any intermediate states, then the sign off of whoever takes > the patch and applies it (here, that's me). So it kind of communicates some > idea of when in the process various tags were obtained. It's not a rule > set in stone though so I'll be lazy and leave this as it is. > Agree, I will try to stick to this in the future. Looking at some previous patches, I see that I used both styles without noticing. > Anyhow, great and applied to the togreg branch of iio.git initially pushed > out as testing for the autobuilders to poke it (or not in the case of this > docume > Great. Do you plan to send them for the next merge window, or will you wait for the 4.9 cycle? Best, Florian -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 04/07/16 07:56, Florian Vaussard wrote: > Hi Jonathan, > > On 07/03/2016 12:41 PM, Jonathan Cameron wrote: >> On 30/06/16 08:43, Florian Vaussard wrote: >>> Add the device tree documentation for all the supported parts. Mandatory >>> binding is the compatible string and the slave I2C address. >>> >>> Optional properties can be used to specify the Vcc / Vref regulators, as >>> well as the IRQ line if available. >>> >>> Acked-by: Rob Herring <robh@kernel.org> >>> Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch> >> Really small point, but typically author sign off goes first then acks etc >> that are gained at any intermediate states, then the sign off of whoever takes >> the patch and applies it (here, that's me). So it kind of communicates some >> idea of when in the process various tags were obtained. It's not a rule >> set in stone though so I'll be lazy and leave this as it is. >> > > Agree, I will try to stick to this in the future. Looking at some previous > patches, I see that I used both styles without noticing. > >> Anyhow, great and applied to the togreg branch of iio.git initially pushed >> out as testing for the autobuilders to poke it (or not in the case of this >> docume >> > > Great. Do you plan to send them for the next merge window, or will you wait for > the 4.9 cycle? > Just sending now... Should be in time for the coming merge window. Jonathan > Best, > Florian > -- > To unsubscribe from this list: send the line "unsubscribe linux-iio" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/iio/adc/max1363.txt b/Documentation/devicetree/bindings/iio/adc/max1363.txt new file mode 100644 index 0000000..94a9011 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/max1363.txt @@ -0,0 +1,63 @@ +* Maxim 1x3x/136x/116xx Analog to Digital Converter (ADC) + +The node for this driver must be a child node of a I2C controller, hence +all mandatory properties for your controller must be specified. See directory: + + Documentation/devicetree/bindings/i2c + +for more details. + +Required properties: + - compatible: Should be one of + "maxim,max1361" + "maxim,max1362" + "maxim,max1363" + "maxim,max1364" + "maxim,max1036" + "maxim,max1037" + "maxim,max1038" + "maxim,max1039" + "maxim,max1136" + "maxim,max1137" + "maxim,max1138" + "maxim,max1139" + "maxim,max1236" + "maxim,max1237" + "maxim,max1238" + "maxim,max1239" + "maxim,max11600" + "maxim,max11601" + "maxim,max11602" + "maxim,max11603" + "maxim,max11604" + "maxim,max11605" + "maxim,max11606" + "maxim,max11607" + "maxim,max11608" + "maxim,max11609" + "maxim,max11610" + "maxim,max11611" + "maxim,max11612" + "maxim,max11613" + "maxim,max11614" + "maxim,max11615" + "maxim,max11616" + "maxim,max11617" + "maxim,max11644" + "maxim,max11645" + "maxim,max11646" + "maxim,max11647" + - reg: Should contain the ADC I2C address + +Optional properties: + - vcc-supply: phandle to the regulator that provides power to the ADC. + - vref-supply: phandle to the regulator for ADC reference voltage. + - interrupts: IRQ line for the ADC. If not used the driver will use + polling. + +Example: +adc: max11644@36 { + compatible = "maxim,max11644"; + reg = <0x36>; + vref-supply = <&adc_vref>; +};