diff mbox

[U-Boot] armv8: dts: fsl: Remove cpu nodes from Layerscape DTSIs

Message ID 1465890511-13049-1-git-send-email-abhimanyu.saini@nxp.com
State Accepted
Commit dee01e426b39eac974364c0658fca431894987c3
Delegated to: York Sun
Headers show

Commit Message

Abhimanyu Saini June 14, 2016, 7:48 a.m. UTC 
Currently layescape SoCs are not using cpu nodes. So removing
them in favour of compatibly with  similar SoCs that
have different cores like LS2080A and LS2088A.

This has been tested on LS2080AQDS, LS1043ARDB, LS1012ARDB.

Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
---
 arch/arm/dts/fsl-ls1012a.dtsi | 12 ---------
 arch/arm/dts/fsl-ls1043a.dtsi | 32 -----------------------
 arch/arm/dts/fsl-ls2080a.dtsi | 61 -------------------------------------------
 3 files changed, 105 deletions(-)

Comments

York Sun June 28, 2016, 6:25 p.m. UTC | #1 
On 06/14/2016 12:48 AM, Abhimanyu Saini wrote:
> Currently layescape SoCs are not using cpu nodes. So removing
> them in favour of compatibly with  similar SoCs that
> have different cores like LS2080A and LS2088A.
>
> This has been tested on LS2080AQDS, LS1043ARDB, LS1012ARDB.
>
> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
> Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
> ---
>   arch/arm/dts/fsl-ls1012a.dtsi | 12 ---------
>   arch/arm/dts/fsl-ls1043a.dtsi | 32 -----------------------
>   arch/arm/dts/fsl-ls2080a.dtsi | 61 -------------------------------------------
>   3 files changed, 105 deletions(-)
>


Applied to u-boot-fsl-qoriq. Awaiting upstream.
Thanks.

York
diff mbox

Patch

diff --git a/arch/arm/dts/fsl-ls1012a.dtsi b/arch/arm/dts/fsl-ls1012a.dtsi
index 546a87a..024527e 100644
--- a/arch/arm/dts/fsl-ls1012a.dtsi
+++ b/arch/arm/dts/fsl-ls1012a.dtsi
@@ -9,18 +9,6 @@ 
 / {
 	compatible = "fsl,ls1012a";
 	interrupt-parent = <&gic>;
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x0>;
-			clocks = <&clockgen 1 0>;
-		};
-
-	};
 
 	sysclk: sysclk {
 		compatible = "fixed-clock";
diff --git a/arch/arm/dts/fsl-ls1043a.dtsi b/arch/arm/dts/fsl-ls1043a.dtsi
index bf1dfe6..a8bffba 100644
--- a/arch/arm/dts/fsl-ls1043a.dtsi
+++ b/arch/arm/dts/fsl-ls1043a.dtsi
@@ -15,38 +15,6 @@ 
 / {
 	compatible = "fsl,ls1043a";
 	interrupt-parent = <&gic>;
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x0>;
-			clocks = <&clockgen 1 0>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x1>;
-			clocks = <&clockgen 1 0>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x2>;
-			clocks = <&clockgen 1 0>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x3>;
-			clocks = <&clockgen 1 0>;
-		};
-	};
 
 	sysclk: sysclk {
 		compatible = "fixed-clock";
diff --git a/arch/arm/dts/fsl-ls2080a.dtsi b/arch/arm/dts/fsl-ls2080a.dtsi
index a5c579c..b29ba2e 100644
--- a/arch/arm/dts/fsl-ls2080a.dtsi
+++ b/arch/arm/dts/fsl-ls2080a.dtsi
@@ -12,67 +12,6 @@ 
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		/*
-		 * We expect the enable-method for cpu's to be "psci", but this
-		 * is dependent on the SoC FW, which will fill this in.
-		 *
-		 * Currently supported enable-method is psci v0.2
-		 */
-
-		/* We have 4 clusters having 2 Cortex-A57 cores each */
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a57";
-			reg = <0x0 0x0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a57";
-			reg = <0x0 0x1>;
-		};
-
-		cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a57";
-			reg = <0x0 0x100>;
-		};
-
-		cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a57";
-			reg = <0x0 0x101>;
-		};
-
-		cpu@200 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a57";
-			reg = <0x0 0x200>;
-		};
-
-		cpu@201 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a57";
-			reg = <0x0 0x201>;
-		};
-
-		cpu@300 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a57";
-			reg = <0x0 0x300>;
-		};
-
-		cpu@301 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a57";
-			reg = <0x0 0x301>;
-		};
-	};
-
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000 0 0x80000000>;