| Message ID | 1456514310-27605-1-git-send-email-dev@lynxeye.de |
|---|---|
| State | Accepted |
| Headers | show |
On 02/26/2016 12:18 PM, Lucas Stach wrote: > Update pinmux to get rid of invalid uses of the rsvd1 function, which lead > to the mux settings on those pins to not be applied. > > Also add correct drive settings, derived from the Tegra3 TRM, for SDIO1, > which makes some more SD-cards work. I replied the following to V1, which I don't see resolved: > I think it would be worth mentioning in the commit description where > this[1] data came from. [1] that was in response to the addition of the sdio1 drive settings. Also, what is different in V2; is this actually V1 REPOST? -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Am Freitag, den 26.02.2016, 12:28 -0700 schrieb Stephen Warren: > On 02/26/2016 12:18 PM, Lucas Stach wrote: > > Update pinmux to get rid of invalid uses of the rsvd1 function, > > which lead > > to the mux settings on those pins to not be applied. > > > > Also add correct drive settings, derived from the Tegra3 TRM, for Your comment from v1 is addressed here ^^^^^^^^^^^^^^^^^^^^^^^^ > > SDIO1, > > which makes some more SD-cards work. > > I replied the following to V1, which I don't see resolved: > > > I think it would be worth mentioning in the commit description > where > > this[1] data came from. > > [1] that was in response to the addition of the sdio1 drive settings. > > Also, what is different in V2; is this actually V1 REPOST? Other than the reworded commit message there is no change in v2. Regards, Lucas -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 02/26/2016 12:36 PM, Lucas Stach wrote: > Am Freitag, den 26.02.2016, 12:28 -0700 schrieb Stephen Warren: >> On 02/26/2016 12:18 PM, Lucas Stach wrote: >>> Update pinmux to get rid of invalid uses of the rsvd1 function, >>> which lead >>> to the mux settings on those pins to not be applied. >>> >>> Also add correct drive settings, derived from the Tegra3 TRM, for > > Your comment from v1 is addressed here ^^^^^^^^^^^^^^^^^^^^^^^^ Oh right, sorry about that. -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Am Freitag, den 26.02.2016, 20:18 +0100 schrieb Lucas Stach: > Update pinmux to get rid of invalid uses of the rsvd1 function, which > lead > to the mux settings on those pins to not be applied. > > Also add correct drive settings, derived from the Tegra3 TRM, for > SDIO1, > which makes some more SD-cards work. > Just a gentle ping on this patch, as I haven't seen it being applied anywhere. > Signed-off-by: Lucas Stach <dev@lynxeye.de> > --- > arch/arm/boot/dts/tegra30-beaver.dts | 39 ++++++++++++++++++++++-- > ------------ > 1 file changed, 24 insertions(+), 15 deletions(-) > > diff --git a/arch/arm/boot/dts/tegra30-beaver.dts > b/arch/arm/boot/dts/tegra30-beaver.dts > index 3dede39..1daed40 100644 > --- a/arch/arm/boot/dts/tegra30-beaver.dts > +++ b/arch/arm/boot/dts/tegra30-beaver.dts > @@ -255,14 +255,14 @@ > }; > sdmmc3_dat6_pd3 { > nvidia,pins = "sdmmc3_dat6_pd3"; > - nvidia,function = "rsvd1"; > + nvidia,function = "spdif"; > nvidia,pull = <TEGRA_PIN_PULL_NONE>; > nvidia,tristate = > <TEGRA_PIN_DISABLE>; > nvidia,enable-input = > <TEGRA_PIN_ENABLE>; > }; > sdmmc3_dat7_pd4 { > nvidia,pins = "sdmmc3_dat7_pd4"; > - nvidia,function = "rsvd1"; > + nvidia,function = "spdif"; > nvidia,pull = <TEGRA_PIN_PULL_NONE>; > nvidia,tristate = > <TEGRA_PIN_DISABLE>; > nvidia,enable-input = > <TEGRA_PIN_ENABLE>; > @@ -276,14 +276,14 @@ > }; > vi_vsync_pd6 { > nvidia,pins = "vi_vsync_pd6"; > - nvidia,function = "rsvd1"; > + nvidia,function = "ddr"; > nvidia,pull = <TEGRA_PIN_PULL_NONE>; > nvidia,tristate = > <TEGRA_PIN_DISABLE>; > nvidia,enable-input = > <TEGRA_PIN_ENABLE>; > }; > vi_hsync_pd7 { > nvidia,pins = "vi_hsync_pd7"; > - nvidia,function = "rsvd1"; > + nvidia,function = "ddr"; > nvidia,pull = <TEGRA_PIN_PULL_NONE>; > nvidia,tristate = > <TEGRA_PIN_DISABLE>; > nvidia,enable-input = > <TEGRA_PIN_ENABLE>; > @@ -801,7 +801,7 @@ > }; > hdmi_int_pn7 { > nvidia,pins = "hdmi_int_pn7"; > - nvidia,function = "rsvd1"; > + nvidia,function = "hdmi"; > nvidia,pull = <TEGRA_PIN_PULL_NONE>; > nvidia,tristate = > <TEGRA_PIN_ENABLE>; > nvidia,enable-input = > <TEGRA_PIN_ENABLE>; > @@ -836,7 +836,7 @@ > }; > ulpi_data3_po4 { > nvidia,pins = "ulpi_data3_po4"; > - nvidia,function = "rsvd1"; > + nvidia,function = "uarta"; > nvidia,pull = <TEGRA_PIN_PULL_NONE>; > nvidia,tristate = > <TEGRA_PIN_DISABLE>; > nvidia,enable-input = > <TEGRA_PIN_ENABLE>; > @@ -1102,21 +1102,21 @@ > }; > vi_d10_pt2 { > nvidia,pins = "vi_d10_pt2"; > - nvidia,function = "rsvd1"; > + nvidia,function = "ddr"; > nvidia,pull = <TEGRA_PIN_PULL_NONE>; > nvidia,tristate = > <TEGRA_PIN_DISABLE>; > nvidia,enable-input = > <TEGRA_PIN_ENABLE>; > }; > vi_d11_pt3 { > nvidia,pins = "vi_d11_pt3"; > - nvidia,function = "rsvd1"; > + nvidia,function = "ddr"; > nvidia,pull = <TEGRA_PIN_PULL_UP>; > nvidia,tristate = > <TEGRA_PIN_DISABLE>; > nvidia,enable-input = > <TEGRA_PIN_ENABLE>; > }; > vi_d0_pt4 { > nvidia,pins = "vi_d0_pt4"; > - nvidia,function = "rsvd1"; > + nvidia,function = "ddr"; > nvidia,pull = <TEGRA_PIN_PULL_NONE>; > nvidia,tristate = > <TEGRA_PIN_DISABLE>; > nvidia,enable-input = > <TEGRA_PIN_ENABLE>; > @@ -1146,7 +1146,7 @@ > }; > pu0 { > nvidia,pins = "pu0"; > - nvidia,function = "rsvd1"; > + nvidia,function = "owr"; > nvidia,pull = <TEGRA_PIN_PULL_NONE>; > nvidia,tristate = > <TEGRA_PIN_DISABLE>; > nvidia,enable-input = > <TEGRA_PIN_ENABLE>; > @@ -1167,7 +1167,7 @@ > }; > pu3 { > nvidia,pins = "pu3"; > - nvidia,function = "rsvd1"; > + nvidia,function = "pwm0"; > nvidia,pull = <TEGRA_PIN_PULL_NONE>; > nvidia,tristate = > <TEGRA_PIN_DISABLE>; > nvidia,enable-input = > <TEGRA_PIN_ENABLE>; > @@ -1188,7 +1188,7 @@ > }; > pu6 { > nvidia,pins = "pu6"; > - nvidia,function = "rsvd1"; > + nvidia,function = "pwm3"; > nvidia,pull = <TEGRA_PIN_PULL_NONE>; > nvidia,tristate = > <TEGRA_PIN_DISABLE>; > nvidia,enable-input = > <TEGRA_PIN_ENABLE>; > @@ -1216,7 +1216,7 @@ > }; > pv3 { > nvidia,pins = "pv3"; > - nvidia,function = "rsvd1"; > + nvidia,function = "clk_12m_out"; > nvidia,pull = <TEGRA_PIN_PULL_NONE>; > nvidia,tristate = > <TEGRA_PIN_DISABLE>; > nvidia,enable-input = > <TEGRA_PIN_DISABLE>; > @@ -1505,7 +1505,7 @@ > }; > pbb0 { > nvidia,pins = "pbb0"; > - nvidia,function = "rsvd1"; > + nvidia,function = "i2s4"; > nvidia,pull = <TEGRA_PIN_PULL_NONE>; > nvidia,tristate = > <TEGRA_PIN_DISABLE>; > nvidia,enable-input = > <TEGRA_PIN_ENABLE>; > @@ -1570,7 +1570,7 @@ > }; > pcc1 { > nvidia,pins = "pcc1"; > - nvidia,function = "rsvd1"; > + nvidia,function = "i2s4"; > nvidia,pull = <TEGRA_PIN_PULL_NONE>; > nvidia,tristate = > <TEGRA_PIN_DISABLE>; > nvidia,enable-input = > <TEGRA_PIN_ENABLE>; > @@ -1718,6 +1718,15 @@ > nvidia,slew-rate-rising = <1>; > nvidia,slew-rate-falling = <1>; > }; > + sdio1 { > + nvidia,pins = "drive_sdio1"; > + nvidia,high-speed-mode = > <TEGRA_PIN_DISABLE>; > + nvidia,schmitt = > <TEGRA_PIN_DISABLE>; > + nvidia,pull-down-strength = <46>; > + nvidia,pull-up-strength = <42>; > + nvidia,slew-rate-rising = <1>; > + nvidia,slew-rate-falling = <1>; > + }; > gpv { > nvidia,pins = "drive_gpv"; > nvidia,pull-up-strength = <16>; -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Feb 26, 2016 at 08:18:30PM +0100, Lucas Stach wrote: > Update pinmux to get rid of invalid uses of the rsvd1 function, which lead > to the mux settings on those pins to not be applied. > > Also add correct drive settings, derived from the Tegra3 TRM, for SDIO1, > which makes some more SD-cards work. > > Signed-off-by: Lucas Stach <dev@lynxeye.de> > --- > arch/arm/boot/dts/tegra30-beaver.dts | 39 ++++++++++++++++++++++-------------- > 1 file changed, 24 insertions(+), 15 deletions(-) Applied, thanks. Stephen, you had looked at this before. If you're happy with it, would you mind providing an Acked-by? I can apply it after the fact. Thierry
On 04/22/2016 05:46 AM, Thierry Reding wrote: > On Fri, Feb 26, 2016 at 08:18:30PM +0100, Lucas Stach wrote: >> Update pinmux to get rid of invalid uses of the rsvd1 function, which lead >> to the mux settings on those pins to not be applied. >> >> Also add correct drive settings, derived from the Tegra3 TRM, for SDIO1, >> which makes some more SD-cards work. >> >> Signed-off-by: Lucas Stach <dev@lynxeye.de> >> --- >> arch/arm/boot/dts/tegra30-beaver.dts | 39 ++++++++++++++++++++++-------------- >> 1 file changed, 24 insertions(+), 15 deletions(-) > > Applied, thanks. > > Stephen, you had looked at this before. If you're happy with it, would > you mind providing an Acked-by? I can apply it after the fact. Acked-by: Stephen Warren <swarren@nvidia.com> This appears to match a recent change in tegra-pinmux-scripts.git. -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index 3dede39..1daed40 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -255,14 +255,14 @@ }; sdmmc3_dat6_pd3 { nvidia,pins = "sdmmc3_dat6_pd3"; - nvidia,function = "rsvd1"; + nvidia,function = "spdif"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; sdmmc3_dat7_pd4 { nvidia,pins = "sdmmc3_dat7_pd4"; - nvidia,function = "rsvd1"; + nvidia,function = "spdif"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; @@ -276,14 +276,14 @@ }; vi_vsync_pd6 { nvidia,pins = "vi_vsync_pd6"; - nvidia,function = "rsvd1"; + nvidia,function = "ddr"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; vi_hsync_pd7 { nvidia,pins = "vi_hsync_pd7"; - nvidia,function = "rsvd1"; + nvidia,function = "ddr"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; @@ -801,7 +801,7 @@ }; hdmi_int_pn7 { nvidia,pins = "hdmi_int_pn7"; - nvidia,function = "rsvd1"; + nvidia,function = "hdmi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; @@ -836,7 +836,7 @@ }; ulpi_data3_po4 { nvidia,pins = "ulpi_data3_po4"; - nvidia,function = "rsvd1"; + nvidia,function = "uarta"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; @@ -1102,21 +1102,21 @@ }; vi_d10_pt2 { nvidia,pins = "vi_d10_pt2"; - nvidia,function = "rsvd1"; + nvidia,function = "ddr"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; vi_d11_pt3 { nvidia,pins = "vi_d11_pt3"; - nvidia,function = "rsvd1"; + nvidia,function = "ddr"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; vi_d0_pt4 { nvidia,pins = "vi_d0_pt4"; - nvidia,function = "rsvd1"; + nvidia,function = "ddr"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; @@ -1146,7 +1146,7 @@ }; pu0 { nvidia,pins = "pu0"; - nvidia,function = "rsvd1"; + nvidia,function = "owr"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; @@ -1167,7 +1167,7 @@ }; pu3 { nvidia,pins = "pu3"; - nvidia,function = "rsvd1"; + nvidia,function = "pwm0"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; @@ -1188,7 +1188,7 @@ }; pu6 { nvidia,pins = "pu6"; - nvidia,function = "rsvd1"; + nvidia,function = "pwm3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; @@ -1216,7 +1216,7 @@ }; pv3 { nvidia,pins = "pv3"; - nvidia,function = "rsvd1"; + nvidia,function = "clk_12m_out"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; @@ -1505,7 +1505,7 @@ }; pbb0 { nvidia,pins = "pbb0"; - nvidia,function = "rsvd1"; + nvidia,function = "i2s4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; @@ -1570,7 +1570,7 @@ }; pcc1 { nvidia,pins = "pcc1"; - nvidia,function = "rsvd1"; + nvidia,function = "i2s4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; @@ -1718,6 +1718,15 @@ nvidia,slew-rate-rising = <1>; nvidia,slew-rate-falling = <1>; }; + sdio1 { + nvidia,pins = "drive_sdio1"; + nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,pull-down-strength = <46>; + nvidia,pull-up-strength = <42>; + nvidia,slew-rate-rising = <1>; + nvidia,slew-rate-falling = <1>; + }; gpv { nvidia,pins = "drive_gpv"; nvidia,pull-up-strength = <16>;
Update pinmux to get rid of invalid uses of the rsvd1 function, which lead to the mux settings on those pins to not be applied. Also add correct drive settings, derived from the Tegra3 TRM, for SDIO1, which makes some more SD-cards work. Signed-off-by: Lucas Stach <dev@lynxeye.de> --- arch/arm/boot/dts/tegra30-beaver.dts | 39 ++++++++++++++++++++++-------------- 1 file changed, 24 insertions(+), 15 deletions(-)