diff mbox

[v3] i2c: mediatek: i2c multi transfer optimization

Message ID 1457375031-3769-1-git-send-email-liguo.zhang@mediatek.com
State Deferred
Delegated to: Wolfram Sang
Headers show

Commit Message

Liguo Zhang March 7, 2016, 6:23 p.m. UTC 
Signal complete() in the i2c irq handler after one transfer done,
and then wait_for_completion_timeout() will return, this procedure
may cost much time, so only signal complete() when the entire
transaction has been completed, it will reduce the entire transaction
time.

Signed-off-by: Liguo Zhang <liguo.zhang@mediatek.com>
---
change in v3:
Update the commit message of this patch.
change in v2:
Remove the unused variable left_num in mtk_i2c_transfer().
---
 drivers/i2c/busses/i2c-mt65xx.c | 221 ++++++++++++++++++++++------------------
 1 file changed, 123 insertions(+), 98 deletions(-)

Comments

Wolfram Sang April 12, 2016, 9:13 p.m. UTC | #1 
Hi,

thanks for the submission!

On Tue, Mar 08, 2016 at 02:23:51AM +0800, Liguo Zhang wrote:
> Signal complete() in the i2c irq handler after one transfer done,
> and then wait_for_completion_timeout() will return, this procedure
> may cost much time, so only signal complete() when the entire
> transaction has been completed, it will reduce the entire transaction
> time.
> 
> Signed-off-by: Liguo Zhang <liguo.zhang@mediatek.com>

I wonder. You have less context switches, yes. On the other hand, you
likely have bigger interrupt latency because you do more stuff in the
interrupt handler. Is it really a gain in the end?

Regards,

   Wolfram
Liguo Zhang April 16, 2016, 4:21 a.m. UTC | #2 
On Tue, 2016-04-12 at 23:13 +0200, Wolfram Sang wrote:
> Hi,
> 
> thanks for the submission!
> 
> On Tue, Mar 08, 2016 at 02:23:51AM +0800, Liguo Zhang wrote:
> > Signal complete() in the i2c irq handler after one transfer done,
> > and then wait_for_completion_timeout() will return, this procedure
> > may cost much time, so only signal complete() when the entire
> > transaction has been completed, it will reduce the entire transaction
> > time.
> > 
> > Signed-off-by: Liguo Zhang <liguo.zhang@mediatek.com>
> 
> I wonder. You have less context switches, yes. On the other hand, you
> likely have bigger interrupt latency because you do more stuff in the
> interrupt handler. Is it really a gain in the end?
> 

When doing i2c multi transfer(first i2c write then i2c read, and not
using the MTK i2c WRRD mode) repeatedly in our stress test, we found the
procedure(complete()-->wait_for_completion_timeout()) may cost much
time, and it will affect the following i2c transfer. In our stress test,
It will affect the i2c read transfer, the value from the i2c read is not
right.
So when doing i2c multi transfer, the first is i2c write,then i2c read,
we will use the MTK i2c WRRD mode to do i2c multi transfer in the
previous patch.
But If i2c multi transfer has at least three transfer, we can't use the
MTK i2c WRRD mode, this patch may be important. Now we have not already
seen the i2c multi transfer scenario, which has at least three transfer.

> Regards,
> 
>    Wolfram
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 453358b..3a498e1 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -139,6 +139,15 @@  struct mtk_i2c_compatible {
 	unsigned char support_33bits: 1;
 };
 
+struct mtk_i2c_transaction {
+	u32 num;
+	u32 index;
+	dma_addr_t wpaddr;
+	dma_addr_t rpaddr;
+	struct i2c_msg *msgs;
+	int result;
+};
+
 struct mtk_i2c {
 	struct i2c_adapter adap;	/* i2c host adapter */
 	struct device *dev;
@@ -161,6 +170,7 @@  struct mtk_i2c {
 	unsigned char auto_restart;
 	bool ignore_restart_irq;
 	const struct mtk_i2c_compatible *dev_comp;
+	struct mtk_i2c_transaction transac;
 };
 
 static const struct i2c_adapter_quirks mt6577_i2c_quirks = {
@@ -378,8 +388,7 @@  static inline u32 mtk_i2c_set_4g_mode(dma_addr_t addr)
 	return (addr & BIT_ULL(32)) ? I2C_DMA_4G_MODE : I2C_DMA_CLR_FLAG;
 }
 
-static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
-			       int num, int left_num)
+static int mtk_i2c_start_transfer(struct mtk_i2c *i2c)
 {
 	u16 addr_reg;
 	u16 start_reg;
@@ -388,15 +397,31 @@  static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 	u32 reg_4g_mode;
 	dma_addr_t rpaddr = 0;
 	dma_addr_t wpaddr = 0;
-	int ret;
+	struct i2c_msg *msg;
+	struct mtk_i2c_transaction *i2c_transac;
+	int num;
+	int left_num;
 
 	i2c->irq_stat = 0;
 
+	i2c_transac = &i2c->transac;
+	num = i2c_transac->num;
+	left_num = i2c_transac->num - i2c_transac->index - 1;
+	msg = &i2c_transac->msgs[i2c_transac->index];
+
+	if (!msg->buf)
+		return -EINVAL;
+
+	if (i2c->op == I2C_MASTER_WRRD)
+		left_num--;
+	else if (msg->flags & I2C_M_RD)
+		i2c->op = I2C_MASTER_RD;
+	else
+		i2c->op = I2C_MASTER_WR;
+
 	if (i2c->auto_restart)
 		restart_flag = I2C_RS_TRANSFER;
 
-	reinit_completion(&i2c->msg_complete);
-
 	control_reg = readw(i2c->base + OFFSET_CONTROL) &
 			~(I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS);
 	if ((i2c->speed_hz > 400000) || (left_num >= 1))
@@ -413,7 +438,7 @@  static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 	else
 		writew(I2C_FS_START_CON, i2c->base + OFFSET_EXT_CONF);
 
-	addr_reg = msgs->addr << 1;
+	addr_reg = msg->addr << 1;
 	if (i2c->op == I2C_MASTER_RD)
 		addr_reg |= 0x1;
 
@@ -431,16 +456,16 @@  static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 	/* Set transfer and transaction len */
 	if (i2c->op == I2C_MASTER_WRRD) {
 		if (i2c->dev_comp->aux_len_reg) {
-			writew(msgs->len, i2c->base + OFFSET_TRANSFER_LEN);
-			writew((msgs + 1)->len, i2c->base +
+			writew(msg->len, i2c->base + OFFSET_TRANSFER_LEN);
+			writew((msg + 1)->len, i2c->base +
 			       OFFSET_TRANSFER_LEN_AUX);
 		} else {
-			writew(msgs->len | ((msgs + 1)->len) << 8,
+			writew(msg->len | ((msg + 1)->len) << 8,
 			       i2c->base + OFFSET_TRANSFER_LEN);
 		}
 		writew(I2C_WRRD_TRANAC_VALUE, i2c->base + OFFSET_TRANSAC_LEN);
 	} else {
-		writew(msgs->len, i2c->base + OFFSET_TRANSFER_LEN);
+		writew(msg->len, i2c->base + OFFSET_TRANSFER_LEN);
 		writew(num, i2c->base + OFFSET_TRANSAC_LEN);
 	}
 
@@ -448,8 +473,8 @@  static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 	if (i2c->op == I2C_MASTER_RD) {
 		writel(I2C_DMA_INT_FLAG_NONE, i2c->pdmabase + OFFSET_INT_FLAG);
 		writel(I2C_DMA_CON_RX, i2c->pdmabase + OFFSET_CON);
-		rpaddr = dma_map_single(i2c->dev, msgs->buf,
-					msgs->len, DMA_FROM_DEVICE);
+		rpaddr = dma_map_single(i2c->dev, msg->buf, msg->len,
+					DMA_FROM_DEVICE);
 		if (dma_mapping_error(i2c->dev, rpaddr))
 			return -ENOMEM;
 
@@ -459,12 +484,13 @@  static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 		}
 
 		writel((u32)rpaddr, i2c->pdmabase + OFFSET_RX_MEM_ADDR);
-		writel(msgs->len, i2c->pdmabase + OFFSET_RX_LEN);
+		writel(msg->len, i2c->pdmabase + OFFSET_RX_LEN);
+		i2c_transac->rpaddr = rpaddr;
 	} else if (i2c->op == I2C_MASTER_WR) {
 		writel(I2C_DMA_INT_FLAG_NONE, i2c->pdmabase + OFFSET_INT_FLAG);
 		writel(I2C_DMA_CON_TX, i2c->pdmabase + OFFSET_CON);
-		wpaddr = dma_map_single(i2c->dev, msgs->buf,
-					msgs->len, DMA_TO_DEVICE);
+		wpaddr = dma_map_single(i2c->dev, msg->buf, msg->len,
+					DMA_TO_DEVICE);
 		if (dma_mapping_error(i2c->dev, wpaddr))
 			return -ENOMEM;
 
@@ -474,20 +500,21 @@  static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 		}
 
 		writel((u32)wpaddr, i2c->pdmabase + OFFSET_TX_MEM_ADDR);
-		writel(msgs->len, i2c->pdmabase + OFFSET_TX_LEN);
+		writel(msg->len, i2c->pdmabase + OFFSET_TX_LEN);
+
+		i2c_transac->wpaddr = wpaddr;
 	} else {
 		writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_INT_FLAG);
 		writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_CON);
-		wpaddr = dma_map_single(i2c->dev, msgs->buf,
-					msgs->len, DMA_TO_DEVICE);
+		wpaddr = dma_map_single(i2c->dev, msg->buf, msg->len,
+					DMA_TO_DEVICE);
 		if (dma_mapping_error(i2c->dev, wpaddr))
 			return -ENOMEM;
-		rpaddr = dma_map_single(i2c->dev, (msgs + 1)->buf,
-					(msgs + 1)->len,
-					DMA_FROM_DEVICE);
+		rpaddr = dma_map_single(i2c->dev, (msg + 1)->buf,
+					(msg + 1)->len, DMA_FROM_DEVICE);
 		if (dma_mapping_error(i2c->dev, rpaddr)) {
-			dma_unmap_single(i2c->dev, wpaddr,
-					 msgs->len, DMA_TO_DEVICE);
+			dma_unmap_single(i2c->dev, wpaddr, msg->len,
+					 DMA_TO_DEVICE);
 			return -ENOMEM;
 		}
 
@@ -501,8 +528,11 @@  static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 
 		writel((u32)wpaddr, i2c->pdmabase + OFFSET_TX_MEM_ADDR);
 		writel((u32)rpaddr, i2c->pdmabase + OFFSET_RX_MEM_ADDR);
-		writel(msgs->len, i2c->pdmabase + OFFSET_TX_LEN);
-		writel((msgs + 1)->len, i2c->pdmabase + OFFSET_RX_LEN);
+		writel(msg->len, i2c->pdmabase + OFFSET_TX_LEN);
+		writel((msg + 1)->len, i2c->pdmabase + OFFSET_RX_LEN);
+
+		i2c_transac->wpaddr = wpaddr;
+		i2c_transac->rpaddr = rpaddr;
 	}
 
 	writel(I2C_DMA_START_EN, i2c->pdmabase + OFFSET_EN);
@@ -516,40 +546,6 @@  static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 	}
 	writew(start_reg, i2c->base + OFFSET_START);
 
-	ret = wait_for_completion_timeout(&i2c->msg_complete,
-					  i2c->adap.timeout);
-
-	/* Clear interrupt mask */
-	writew(~(restart_flag | I2C_HS_NACKERR | I2C_ACKERR |
-	       I2C_TRANSAC_COMP), i2c->base + OFFSET_INTR_MASK);
-
-	if (i2c->op == I2C_MASTER_WR) {
-		dma_unmap_single(i2c->dev, wpaddr,
-				 msgs->len, DMA_TO_DEVICE);
-	} else if (i2c->op == I2C_MASTER_RD) {
-		dma_unmap_single(i2c->dev, rpaddr,
-				 msgs->len, DMA_FROM_DEVICE);
-	} else {
-		dma_unmap_single(i2c->dev, wpaddr, msgs->len,
-				 DMA_TO_DEVICE);
-		dma_unmap_single(i2c->dev, rpaddr, (msgs + 1)->len,
-				 DMA_FROM_DEVICE);
-	}
-
-	if (ret == 0) {
-		dev_dbg(i2c->dev, "addr: %x, transfer timeout\n", msgs->addr);
-		mtk_i2c_init_hw(i2c);
-		return -ETIMEDOUT;
-	}
-
-	completion_done(&i2c->msg_complete);
-
-	if (i2c->irq_stat & (I2C_HS_NACKERR | I2C_ACKERR)) {
-		dev_dbg(i2c->dev, "addr: %x, transfer ACK error\n", msgs->addr);
-		mtk_i2c_init_hw(i2c);
-		return -ENXIO;
-	}
-
 	return 0;
 }
 
@@ -557,21 +553,28 @@  static int mtk_i2c_transfer(struct i2c_adapter *adap,
 			    struct i2c_msg msgs[], int num)
 {
 	int ret;
-	int left_num = num;
 	struct mtk_i2c *i2c = i2c_get_adapdata(adap);
+	struct mtk_i2c_transaction *i2c_transac = &i2c->transac;
+
+	i2c_transac->num = num;
+	i2c_transac->index = 0;
+	i2c_transac->msgs = msgs;
+	i2c_transac->result = 0;
+
+	reinit_completion(&i2c->msg_complete);
 
 	ret = mtk_i2c_clock_enable(i2c);
 	if (ret)
 		return ret;
 
+	i2c->op = 0;
 	i2c->auto_restart = i2c->dev_comp->auto_restart;
 
 	/* checking if we can skip restart and optimize using WRRD mode */
-	if (i2c->auto_restart && num == 2) {
-		if (!(msgs[0].flags & I2C_M_RD) && (msgs[1].flags & I2C_M_RD) &&
-		    msgs[0].addr == msgs[1].addr) {
-			i2c->auto_restart = 0;
-		}
+	if (num == 2 && !(msgs[0].flags & I2C_M_RD) &&
+	    (msgs[1].flags & I2C_M_RD) && msgs[0].addr == msgs[1].addr) {
+		i2c->op = I2C_MASTER_WRRD;
+		i2c->auto_restart = 0;
 	}
 
 	if (i2c->auto_restart && num >= 2 && i2c->speed_hz > MAX_FS_MODE_SPEED)
@@ -582,33 +585,33 @@  static int mtk_i2c_transfer(struct i2c_adapter *adap,
 	else
 		i2c->ignore_restart_irq = false;
 
-	while (left_num--) {
-		if (!msgs->buf) {
-			dev_dbg(i2c->dev, "data buffer is NULL.\n");
-			ret = -EINVAL;
-			goto err_exit;
-		}
+	/* always use DMA mode. */
+	ret = mtk_i2c_start_transfer(i2c);
+	if (ret < 0)
+		goto err_exit;
 
-		if (msgs->flags & I2C_M_RD)
-			i2c->op = I2C_MASTER_RD;
-		else
-			i2c->op = I2C_MASTER_WR;
-
-		if (!i2c->auto_restart) {
-			if (num > 1) {
-				/* combined two messages into one transaction */
-				i2c->op = I2C_MASTER_WRRD;
-				left_num--;
-			}
-		}
+	ret = wait_for_completion_timeout(&i2c->msg_complete,
+					  i2c->adap.timeout);
 
-		/* always use DMA mode. */
-		ret = mtk_i2c_do_transfer(i2c, msgs, num, left_num);
-		if (ret < 0)
-			goto err_exit;
+	if (ret == 0) {
+		dev_dbg(i2c->dev, "addr: %x, transfer timeout\n", msgs->addr);
+		mtk_i2c_init_hw(i2c);
+		ret = -ETIMEDOUT;
+		goto err_exit;
+	}
 
-		msgs++;
+	if (i2c->irq_stat & (I2C_HS_NACKERR | I2C_ACKERR)) {
+		dev_dbg(i2c->dev, "addr: %x, transfer ACK error\n", msgs->addr);
+		mtk_i2c_init_hw(i2c);
+		ret = -ENXIO;
+		goto err_exit;
+	}
+
+	if (i2c_transac->result) {
+		ret = i2c_transac->result;
+		goto err_exit;
 	}
+
 	/* the return value is number of executed messages */
 	ret = num;
 
@@ -621,29 +624,51 @@  static irqreturn_t mtk_i2c_irq(int irqno, void *dev_id)
 {
 	struct mtk_i2c *i2c = dev_id;
 	u16 restart_flag = 0;
-	u16 intr_stat;
+	struct i2c_msg *msg;
+	struct mtk_i2c_transaction *i2c_transac = &i2c->transac;
 
 	if (i2c->auto_restart)
 		restart_flag = I2C_RS_TRANSFER;
 
-	intr_stat = readw(i2c->base + OFFSET_INTR_STAT);
-	writew(intr_stat, i2c->base + OFFSET_INTR_STAT);
+	/* Clear interrupt mask */
+	writew(~(restart_flag | I2C_HS_NACKERR | I2C_ACKERR |
+	       I2C_TRANSAC_COMP), i2c->base + OFFSET_INTR_MASK);
 
-	/*
-	 * when occurs ack error, i2c controller generate two interrupts
-	 * first is the ack error interrupt, then the complete interrupt
-	 * i2c->irq_stat need keep the two interrupt value.
-	 */
-	i2c->irq_stat |= intr_stat;
+	i2c->irq_stat = readw(i2c->base + OFFSET_INTR_STAT);
+	writew(i2c->irq_stat, i2c->base + OFFSET_INTR_STAT);
 
 	if (i2c->ignore_restart_irq && (i2c->irq_stat & restart_flag)) {
 		i2c->ignore_restart_irq = false;
 		i2c->irq_stat = 0;
+		/* Enable interrupt */
+		writew(restart_flag | I2C_HS_NACKERR | I2C_ACKERR |
+		       I2C_TRANSAC_COMP, i2c->base + OFFSET_INTR_MASK);
 		writew(I2C_RS_MUL_CNFG | I2C_RS_MUL_TRIG | I2C_TRANSAC_START,
 		       i2c->base + OFFSET_START);
 	} else {
-		if (i2c->irq_stat & (I2C_TRANSAC_COMP | restart_flag))
+		msg = &i2c_transac->msgs[i2c_transac->index];
+
+		if (i2c->op == I2C_MASTER_WR || i2c->op == I2C_MASTER_WRRD) {
+			dma_unmap_single(i2c->dev, i2c_transac->wpaddr,
+					 msg->len, DMA_TO_DEVICE);
+		}
+
+		if (i2c->op == I2C_MASTER_WRRD)
+			dma_unmap_single(i2c->dev, i2c_transac->rpaddr,
+					 (msg + 1)->len, DMA_FROM_DEVICE);
+
+		if (i2c->op == I2C_MASTER_RD)
+			dma_unmap_single(i2c->dev, i2c_transac->rpaddr,
+					 msg->len, DMA_FROM_DEVICE);
+
+		if (i2c->irq_stat & ~restart_flag) {
 			complete(&i2c->msg_complete);
+		} else {
+			i2c_transac->index++;
+			i2c_transac->result = mtk_i2c_start_transfer(i2c);
+			if (i2c_transac->result)
+				complete(&i2c->msg_complete);
+		}
 	}
 
 	return IRQ_HANDLED;