diff mbox

[1/3,v2] drm/i2c/adv7511: Add audio support

Message ID 15b1936d307912ba12df7fa09ec3a7a80ac5fcef.1459174494.git.joabreu@synopsys.com
State New
Headers show

Commit Message

Jose Abreu March 28, 2016, 2:36 p.m. UTC
This patch adds audio support for the ADV7511 HDMI transmitter
using ALSA SoC.

The code was ported from Analog Devices linux tree from
commit 1770c4a1e32b ("Merge remote-tracking branch
'xilinx/master' into xcomm_zynq"), which is available at:
	- https://github.com/analogdevicesinc/linux/

The main core file was renamed from adv7511.c to adv7511_core.c
so that audio and video compile into a single adv7511.ko module
and to keep up with Analog Devices kernel tree.

The audio can be disabled using menu-config so it is possible
to use only video mode.

The HDMI mode is automatically started at boot and the audio
(when enabled) registers as a codec into ALSA.

SPDIF DAI format was also added to ASoC as it is required
by adv7511 audio.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
---

No changes v1 -> v2.

 drivers/gpu/drm/i2c/Kconfig         |   11 +
 drivers/gpu/drm/i2c/Makefile        |    2 +
 drivers/gpu/drm/i2c/adv7511.c       | 1024 -----------------------------------
 drivers/gpu/drm/i2c/adv7511.h       |   41 ++
 drivers/gpu/drm/i2c/adv7511_audio.c |  310 +++++++++++
 drivers/gpu/drm/i2c/adv7511_core.c  | 1005 ++++++++++++++++++++++++++++++++++
 include/sound/soc-dai.h             |    1 +
 7 files changed, 1370 insertions(+), 1024 deletions(-)
 delete mode 100644 drivers/gpu/drm/i2c/adv7511.c
 create mode 100644 drivers/gpu/drm/i2c/adv7511_audio.c
 create mode 100644 drivers/gpu/drm/i2c/adv7511_core.c

Comments

Archit Taneja March 29, 2016, 8:05 a.m. UTC | #1
Hi,

On 03/28/2016 08:06 PM, Jose Abreu wrote:
> This patch adds audio support for the ADV7511 HDMI transmitter
> using ALSA SoC.
>
> The code was ported from Analog Devices linux tree from
> commit 1770c4a1e32b ("Merge remote-tracking branch
> 'xilinx/master' into xcomm_zynq"), which is available at:
> 	- https://github.com/analogdevicesinc/linux/
>
> The main core file was renamed from adv7511.c to adv7511_core.c
> so that audio and video compile into a single adv7511.ko module
> and to keep up with Analog Devices kernel tree.
>
> The audio can be disabled using menu-config so it is possible
> to use only video mode.
>
> The HDMI mode is automatically started at boot and the audio
> (when enabled) registers as a codec into ALSA.

Is there a reason why we set the mode to HDMI at probe itself?
Shouldn't it be okay to set the mode later once we read the
EDID off the panel?

Some more comments below.

>
> SPDIF DAI format was also added to ASoC as it is required
> by adv7511 audio.
>
> Signed-off-by: Jose Abreu <joabreu@synopsys.com>
> ---
>
> No changes v1 -> v2.
>
>   drivers/gpu/drm/i2c/Kconfig         |   11 +
>   drivers/gpu/drm/i2c/Makefile        |    2 +
>   drivers/gpu/drm/i2c/adv7511.c       | 1024 -----------------------------------
>   drivers/gpu/drm/i2c/adv7511.h       |   41 ++
>   drivers/gpu/drm/i2c/adv7511_audio.c |  310 +++++++++++
>   drivers/gpu/drm/i2c/adv7511_core.c  | 1005 ++++++++++++++++++++++++++++++++++
>   include/sound/soc-dai.h             |    1 +
>   7 files changed, 1370 insertions(+), 1024 deletions(-)
>   delete mode 100644 drivers/gpu/drm/i2c/adv7511.c
>   create mode 100644 drivers/gpu/drm/i2c/adv7511_audio.c
>   create mode 100644 drivers/gpu/drm/i2c/adv7511_core.c

<snip>

> +
> +static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
> +{
> +	struct adv7511_link_config link_config;
> +	struct adv7511 *adv7511;
> +	struct device *dev = &i2c->dev;
> +	unsigned int val;
> +	int ret;
> +
> +	if (!dev->of_node)
> +		return -EINVAL;
> +
> +	adv7511 = devm_kzalloc(dev, sizeof(*adv7511), GFP_KERNEL);
> +	if (!adv7511)
> +		return -ENOMEM;
> +
> +	adv7511->powered = false;
> +	adv7511->status = connector_status_disconnected;
> +
> +	ret = adv7511_parse_dt(dev->of_node, &link_config);
> +	if (ret)
> +		return ret;
> +
> +	/*
> +	 * The power down GPIO is optional. If present, toggle it from active to
> +	 * inactive to wake up the encoder.
> +	 */
> +	adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH);
> +	if (IS_ERR(adv7511->gpio_pd))
> +		return PTR_ERR(adv7511->gpio_pd);
> +
> +	if (adv7511->gpio_pd) {
> +		mdelay(5);
> +		gpiod_set_value_cansleep(adv7511->gpio_pd, 0);
> +	}
> +
> +	adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config);
> +	if (IS_ERR(adv7511->regmap))
> +		return PTR_ERR(adv7511->regmap);
> +
> +	ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val);
> +	if (ret)
> +		return ret;
> +	dev_dbg(dev, "Rev. %d\n", val);
> +
> +	ret = regmap_register_patch(adv7511->regmap, adv7511_fixed_registers,
> +				    ARRAY_SIZE(adv7511_fixed_registers));
> +	if (ret)
> +		return ret;
> +
> +	regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, edid_i2c_addr);
> +	regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
> +		     packet_i2c_addr);
> +	regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR, cec_i2c_addr);
> +	adv7511_packet_disable(adv7511, 0xffff);
> +
> +	adv7511->i2c_main = i2c;
> +	adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
> +	if (!adv7511->i2c_edid)
> +		return -ENOMEM;
> +
> +	if (i2c->irq) {
> +		init_waitqueue_head(&adv7511->wq);
> +
> +		ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
> +						adv7511_irq_handler,
> +						IRQF_ONESHOT, dev_name(dev),
> +						adv7511);
> +		if (ret)
> +			goto err_i2c_unregister_device;
> +	}
> +
> +	/* CEC is unused for now */
> +	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
> +		     ADV7511_CEC_CTRL_POWER_DOWN);
> +
> +	adv7511_power_off(adv7511);
> +
> +	i2c_set_clientdata(i2c, adv7511);
> +
> +#ifdef CONFIG_DRM_I2C_ADV7511_AUDIO
> +	adv7511_audio_init(&i2c->dev);
> +#endif

If we intend to have more audio funcs being used by the core in the
future, it would be nice to have NOP audio funcs rather than having
multiple #ifdef checks in the driver when CONFIG_DRM_I2C_ADV7511_AUDIO
isn't set.

> +
> +	adv7511_set_link_config(adv7511, &link_config);
> +
> +	/* Enable HDMI mode */
> +	regmap_update_bits(adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG,
> +			ADV7511_HDMI_CFG_MODE_MASK,
> +			ADV7511_HDMI_CFG_MODE_HDMI);
> +
> +	return 0;
> +
> +err_i2c_unregister_device:
> +	i2c_unregister_device(adv7511->i2c_edid);
> +
> +	return ret;
> +}
> +
> +static int adv7511_remove(struct i2c_client *i2c)
> +{
> +	struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
> +

Are we missing a call to adv7511_audio_exit() here?

Thanks,
Archit
Jose Abreu March 29, 2016, 10:52 a.m. UTC | #2
Hi Archit,

On 29-03-2016 09:05, Archit Taneja wrote:
> Hi,
>
> On 03/28/2016 08:06 PM, Jose Abreu wrote:
>> This patch adds audio support for the ADV7511 HDMI transmitter
>> using ALSA SoC.
>>
>> The code was ported from Analog Devices linux tree from
>> commit 1770c4a1e32b ("Merge remote-tracking branch
>> 'xilinx/master' into xcomm_zynq"), which is available at:
>>     - https://github.com/analogdevicesinc/linux/
>>
>> The main core file was renamed from adv7511.c to adv7511_core.c
>> so that audio and video compile into a single adv7511.ko module
>> and to keep up with Analog Devices kernel tree.
>>
>> The audio can be disabled using menu-config so it is possible
>> to use only video mode.
>>
>> The HDMI mode is automatically started at boot and the audio
>> (when enabled) registers as a codec into ALSA.
>
> Is there a reason why we set the mode to HDMI at probe itself?
> Shouldn't it be okay to set the mode later once we read the
> EDID off the panel?
>
> Some more comments below.
>

Well, when I was using this in kernel 3.18 (with an older version of the driver)
I noticed that DVI mode was being used even when HDMI was connected so I forced
the driver to start in HDMI mode. There were some changes in the driver so it is
possible that this is no longer needed. Should I drop it?

>>
>> SPDIF DAI format was also added to ASoC as it is required
>> by adv7511 audio.
>>
>> Signed-off-by: Jose Abreu <joabreu@synopsys.com>
>> ---
>>
>> No changes v1 -> v2.
>>
>>   drivers/gpu/drm/i2c/Kconfig         |   11 +
>>   drivers/gpu/drm/i2c/Makefile        |    2 +
>>   drivers/gpu/drm/i2c/adv7511.c       | 1024 -----------------------------------
>>   drivers/gpu/drm/i2c/adv7511.h       |   41 ++
>>   drivers/gpu/drm/i2c/adv7511_audio.c |  310 +++++++++++
>>   drivers/gpu/drm/i2c/adv7511_core.c  | 1005 ++++++++++++++++++++++++++++++++++
>>   include/sound/soc-dai.h             |    1 +
>>   7 files changed, 1370 insertions(+), 1024 deletions(-)
>>   delete mode 100644 drivers/gpu/drm/i2c/adv7511.c
>>   create mode 100644 drivers/gpu/drm/i2c/adv7511_audio.c
>>   create mode 100644 drivers/gpu/drm/i2c/adv7511_core.c
>
> <snip>
>
>> +
>> +static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id
>> *id)
>> +{
>> +    struct adv7511_link_config link_config;
>> +    struct adv7511 *adv7511;
>> +    struct device *dev = &i2c->dev;
>> +    unsigned int val;
>> +    int ret;
>> +
>> +    if (!dev->of_node)
>> +        return -EINVAL;
>> +
>> +    adv7511 = devm_kzalloc(dev, sizeof(*adv7511), GFP_KERNEL);
>> +    if (!adv7511)
>> +        return -ENOMEM;
>> +
>> +    adv7511->powered = false;
>> +    adv7511->status = connector_status_disconnected;
>> +
>> +    ret = adv7511_parse_dt(dev->of_node, &link_config);
>> +    if (ret)
>> +        return ret;
>> +
>> +    /*
>> +     * The power down GPIO is optional. If present, toggle it from active to
>> +     * inactive to wake up the encoder.
>> +     */
>> +    adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH);
>> +    if (IS_ERR(adv7511->gpio_pd))
>> +        return PTR_ERR(adv7511->gpio_pd);
>> +
>> +    if (adv7511->gpio_pd) {
>> +        mdelay(5);
>> +        gpiod_set_value_cansleep(adv7511->gpio_pd, 0);
>> +    }
>> +
>> +    adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config);
>> +    if (IS_ERR(adv7511->regmap))
>> +        return PTR_ERR(adv7511->regmap);
>> +
>> +    ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val);
>> +    if (ret)
>> +        return ret;
>> +    dev_dbg(dev, "Rev. %d\n", val);
>> +
>> +    ret = regmap_register_patch(adv7511->regmap, adv7511_fixed_registers,
>> +                    ARRAY_SIZE(adv7511_fixed_registers));
>> +    if (ret)
>> +        return ret;
>> +
>> +    regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, edid_i2c_addr);
>> +    regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
>> +             packet_i2c_addr);
>> +    regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR, cec_i2c_addr);
>> +    adv7511_packet_disable(adv7511, 0xffff);
>> +
>> +    adv7511->i2c_main = i2c;
>> +    adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
>> +    if (!adv7511->i2c_edid)
>> +        return -ENOMEM;
>> +
>> +    if (i2c->irq) {
>> +        init_waitqueue_head(&adv7511->wq);
>> +
>> +        ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
>> +                        adv7511_irq_handler,
>> +                        IRQF_ONESHOT, dev_name(dev),
>> +                        adv7511);
>> +        if (ret)
>> +            goto err_i2c_unregister_device;
>> +    }
>> +
>> +    /* CEC is unused for now */
>> +    regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
>> +             ADV7511_CEC_CTRL_POWER_DOWN);
>> +
>> +    adv7511_power_off(adv7511);
>> +
>> +    i2c_set_clientdata(i2c, adv7511);
>> +
>> +#ifdef CONFIG_DRM_I2C_ADV7511_AUDIO
>> +    adv7511_audio_init(&i2c->dev);
>> +#endif
>
> If we intend to have more audio funcs being used by the core in the
> future, it would be nice to have NOP audio funcs rather than having
> multiple #ifdef checks in the driver when CONFIG_DRM_I2C_ADV7511_AUDIO
> isn't set.
>

I will move this ifdef to adv751_audio and use NOP functions.

>> +
>> +    adv7511_set_link_config(adv7511, &link_config);
>> +
>> +    /* Enable HDMI mode */
>> +    regmap_update_bits(adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG,
>> +            ADV7511_HDMI_CFG_MODE_MASK,
>> +            ADV7511_HDMI_CFG_MODE_HDMI);
>> +
>> +    return 0;
>> +
>> +err_i2c_unregister_device:
>> +    i2c_unregister_device(adv7511->i2c_edid);
>> +
>> +    return ret;
>> +}
>> +
>> +static int adv7511_remove(struct i2c_client *i2c)
>> +{
>> +    struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
>> +
>
> Are we missing a call to adv7511_audio_exit() here?

I followed the code in Analog Devices tree where there is no call to
audio_exit() but indeed you are correct. I will add this call.

>
> Thanks,
> Archit
>

Thanks for your comments!

Best regards,
Jose Miguel Abreu
Archit Taneja March 29, 2016, 5:03 p.m. UTC | #3
On 3/29/2016 4:22 PM, Jose Abreu wrote:
> Hi Archit,
>
> On 29-03-2016 09:05, Archit Taneja wrote:
>> Hi,
>>
>> On 03/28/2016 08:06 PM, Jose Abreu wrote:
>>> This patch adds audio support for the ADV7511 HDMI transmitter
>>> using ALSA SoC.
>>>
>>> The code was ported from Analog Devices linux tree from
>>> commit 1770c4a1e32b ("Merge remote-tracking branch
>>> 'xilinx/master' into xcomm_zynq"), which is available at:
>>>      - https://github.com/analogdevicesinc/linux/
>>>
>>> The main core file was renamed from adv7511.c to adv7511_core.c
>>> so that audio and video compile into a single adv7511.ko module
>>> and to keep up with Analog Devices kernel tree.
>>>
>>> The audio can be disabled using menu-config so it is possible
>>> to use only video mode.
>>>
>>> The HDMI mode is automatically started at boot and the audio
>>> (when enabled) registers as a codec into ALSA.
>>
>> Is there a reason why we set the mode to HDMI at probe itself?
>> Shouldn't it be okay to set the mode later once we read the
>> EDID off the panel?
>>
>> Some more comments below.
>>
>
> Well, when I was using this in kernel 3.18 (with an older version of the driver)
> I noticed that DVI mode was being used even when HDMI was connected so I forced
> the driver to start in HDMI mode. There were some changes in the driver so it is
> possible that this is no longer needed. Should I drop it?

Mode selection works fine with ADV7533 on a 4.5 kernel. I'm assuming it
should work out of the box for ADV7511 too. We should drop this.


>
>>>
>>> SPDIF DAI format was also added to ASoC as it is required
>>> by adv7511 audio.
>>>
>>> Signed-off-by: Jose Abreu <joabreu@synopsys.com>
>>> ---
>>>
>>> No changes v1 -> v2.
>>>
>>>    drivers/gpu/drm/i2c/Kconfig         |   11 +
>>>    drivers/gpu/drm/i2c/Makefile        |    2 +
>>>    drivers/gpu/drm/i2c/adv7511.c       | 1024 -----------------------------------
>>>    drivers/gpu/drm/i2c/adv7511.h       |   41 ++
>>>    drivers/gpu/drm/i2c/adv7511_audio.c |  310 +++++++++++
>>>    drivers/gpu/drm/i2c/adv7511_core.c  | 1005 ++++++++++++++++++++++++++++++++++
>>>    include/sound/soc-dai.h             |    1 +
>>>    7 files changed, 1370 insertions(+), 1024 deletions(-)
>>>    delete mode 100644 drivers/gpu/drm/i2c/adv7511.c
>>>    create mode 100644 drivers/gpu/drm/i2c/adv7511_audio.c
>>>    create mode 100644 drivers/gpu/drm/i2c/adv7511_core.c
>>
>> <snip>
>>
>>> +
>>> +static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id
>>> *id)
>>> +{
>>> +    struct adv7511_link_config link_config;
>>> +    struct adv7511 *adv7511;
>>> +    struct device *dev = &i2c->dev;
>>> +    unsigned int val;
>>> +    int ret;
>>> +
>>> +    if (!dev->of_node)
>>> +        return -EINVAL;
>>> +
>>> +    adv7511 = devm_kzalloc(dev, sizeof(*adv7511), GFP_KERNEL);
>>> +    if (!adv7511)
>>> +        return -ENOMEM;
>>> +
>>> +    adv7511->powered = false;
>>> +    adv7511->status = connector_status_disconnected;
>>> +
>>> +    ret = adv7511_parse_dt(dev->of_node, &link_config);
>>> +    if (ret)
>>> +        return ret;
>>> +
>>> +    /*
>>> +     * The power down GPIO is optional. If present, toggle it from active to
>>> +     * inactive to wake up the encoder.
>>> +     */
>>> +    adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH);
>>> +    if (IS_ERR(adv7511->gpio_pd))
>>> +        return PTR_ERR(adv7511->gpio_pd);
>>> +
>>> +    if (adv7511->gpio_pd) {
>>> +        mdelay(5);
>>> +        gpiod_set_value_cansleep(adv7511->gpio_pd, 0);
>>> +    }
>>> +
>>> +    adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config);
>>> +    if (IS_ERR(adv7511->regmap))
>>> +        return PTR_ERR(adv7511->regmap);
>>> +
>>> +    ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val);
>>> +    if (ret)
>>> +        return ret;
>>> +    dev_dbg(dev, "Rev. %d\n", val);
>>> +
>>> +    ret = regmap_register_patch(adv7511->regmap, adv7511_fixed_registers,
>>> +                    ARRAY_SIZE(adv7511_fixed_registers));
>>> +    if (ret)
>>> +        return ret;
>>> +
>>> +    regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, edid_i2c_addr);
>>> +    regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
>>> +             packet_i2c_addr);
>>> +    regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR, cec_i2c_addr);
>>> +    adv7511_packet_disable(adv7511, 0xffff);
>>> +
>>> +    adv7511->i2c_main = i2c;
>>> +    adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
>>> +    if (!adv7511->i2c_edid)
>>> +        return -ENOMEM;
>>> +
>>> +    if (i2c->irq) {
>>> +        init_waitqueue_head(&adv7511->wq);
>>> +
>>> +        ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
>>> +                        adv7511_irq_handler,
>>> +                        IRQF_ONESHOT, dev_name(dev),
>>> +                        adv7511);
>>> +        if (ret)
>>> +            goto err_i2c_unregister_device;
>>> +    }
>>> +
>>> +    /* CEC is unused for now */
>>> +    regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
>>> +             ADV7511_CEC_CTRL_POWER_DOWN);
>>> +
>>> +    adv7511_power_off(adv7511);
>>> +
>>> +    i2c_set_clientdata(i2c, adv7511);
>>> +
>>> +#ifdef CONFIG_DRM_I2C_ADV7511_AUDIO
>>> +    adv7511_audio_init(&i2c->dev);
>>> +#endif
>>
>> If we intend to have more audio funcs being used by the core in the
>> future, it would be nice to have NOP audio funcs rather than having
>> multiple #ifdef checks in the driver when CONFIG_DRM_I2C_ADV7511_AUDIO
>> isn't set.
>>
>
> I will move this ifdef to adv751_audio and use NOP functions.

Thanks, I think it should help in the longer run.

>
>>> +
>>> +    adv7511_set_link_config(adv7511, &link_config);
>>> +
>>> +    /* Enable HDMI mode */
>>> +    regmap_update_bits(adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG,
>>> +            ADV7511_HDMI_CFG_MODE_MASK,
>>> +            ADV7511_HDMI_CFG_MODE_HDMI);
>>> +
>>> +    return 0;
>>> +
>>> +err_i2c_unregister_device:
>>> +    i2c_unregister_device(adv7511->i2c_edid);
>>> +
>>> +    return ret;
>>> +}
>>> +
>>> +static int adv7511_remove(struct i2c_client *i2c)
>>> +{
>>> +    struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
>>> +
>>
>> Are we missing a call to adv7511_audio_exit() here?
>
> I followed the code in Analog Devices tree where there is no call to
> audio_exit() but indeed you are correct. I will add this call.
>

Since we have 3 files for adv7511 now, could we also move the driver
to a separate folder? The long term plan is to convert all the i2c
slave encoder drivers to bridges. Keeping them together would be nicer
when we migrate this driver to the bridge folder.

Thanks,
Archit
Emil Velikov March 30, 2016, 9:58 a.m. UTC | #4
Hi Jose,

On 28 March 2016 at 15:36, Jose Abreu <Jose.Abreu@synopsys.com> wrote:
> This patch adds audio support for the ADV7511 HDMI transmitter
> using ALSA SoC.
>
> The code was ported from Analog Devices linux tree from
> commit 1770c4a1e32b ("Merge remote-tracking branch
> 'xilinx/master' into xcomm_zynq"), which is available at:
>         - https://github.com/analogdevicesinc/linux/
>
> The main core file was renamed from adv7511.c to adv7511_core.c
> so that audio and video compile into a single adv7511.ko module
> and to keep up with Analog Devices kernel tree.
>
> The audio can be disabled using menu-config so it is possible
> to use only video mode.
>
> The HDMI mode is automatically started at boot and the audio
> (when enabled) registers as a codec into ALSA.
>
> SPDIF DAI format was also added to ASoC as it is required
> by adv7511 audio.
>
> Signed-off-by: Jose Abreu <joabreu@synopsys.com>
> ---
>
> No changes v1 -> v2.
>
>  drivers/gpu/drm/i2c/Kconfig         |   11 +
>  drivers/gpu/drm/i2c/Makefile        |    2 +
>  drivers/gpu/drm/i2c/adv7511.c       | 1024 -----------------------------------
>  drivers/gpu/drm/i2c/adv7511.h       |   41 ++
>  drivers/gpu/drm/i2c/adv7511_audio.c |  310 +++++++++++
>  drivers/gpu/drm/i2c/adv7511_core.c  | 1005 ++++++++++++++++++++++++++++++++++
Please keep the file rename separate (and use -M flag when generating
the patch) from the introduction of audio support. Having to check 1k
LOC movement alongside the introduction of new one is a bit...
suboptimal.

Regards,
Emil
Jose Abreu March 31, 2016, 12:57 p.m. UTC | #5
Hi Archit,


On 29-03-2016 18:03, Archit Taneja wrote:
>
>
> On 3/29/2016 4:22 PM, Jose Abreu wrote:
>> Hi Archit,
>>
>> On 29-03-2016 09:05, Archit Taneja wrote:
>>> Hi,
>>>
>>> On 03/28/2016 08:06 PM, Jose Abreu wrote:
>>>> This patch adds audio support for the ADV7511 HDMI transmitter
>>>> using ALSA SoC.
>>>>
>>>> The code was ported from Analog Devices linux tree from
>>>> commit 1770c4a1e32b ("Merge remote-tracking branch
>>>> 'xilinx/master' into xcomm_zynq"), which is available at:
>>>>      - https://github.com/analogdevicesinc/linux/
>>>>
>>>> The main core file was renamed from adv7511.c to adv7511_core.c
>>>> so that audio and video compile into a single adv7511.ko module
>>>> and to keep up with Analog Devices kernel tree.
>>>>
>>>> The audio can be disabled using menu-config so it is possible
>>>> to use only video mode.
>>>>
>>>> The HDMI mode is automatically started at boot and the audio
>>>> (when enabled) registers as a codec into ALSA.
>>>
>>> Is there a reason why we set the mode to HDMI at probe itself?
>>> Shouldn't it be okay to set the mode later once we read the
>>> EDID off the panel?
>>>
>>> Some more comments below.
>>>
>>
>> Well, when I was using this in kernel 3.18 (with an older version of the driver)
>> I noticed that DVI mode was being used even when HDMI was connected so I forced
>> the driver to start in HDMI mode. There were some changes in the driver so it is
>> possible that this is no longer needed. Should I drop it?
>
> Mode selection works fine with ADV7533 on a 4.5 kernel. I'm assuming it
> should work out of the box for ADV7511 too. We should drop this.
>
>

Ok, will drop.

>>
>>>>
>>>> SPDIF DAI format was also added to ASoC as it is required
>>>> by adv7511 audio.
>>>>
>>>> Signed-off-by: Jose Abreu <joabreu@synopsys.com>
>>>> ---
>>>>
>>>> No changes v1 -> v2.
>>>>
>>>>    drivers/gpu/drm/i2c/Kconfig         |   11 +
>>>>    drivers/gpu/drm/i2c/Makefile        |    2 +
>>>>    drivers/gpu/drm/i2c/adv7511.c       | 1024
>>>> -----------------------------------
>>>>    drivers/gpu/drm/i2c/adv7511.h       |   41 ++
>>>>    drivers/gpu/drm/i2c/adv7511_audio.c |  310 +++++++++++
>>>>    drivers/gpu/drm/i2c/adv7511_core.c  | 1005
>>>> ++++++++++++++++++++++++++++++++++
>>>>    include/sound/soc-dai.h             |    1 +
>>>>    7 files changed, 1370 insertions(+), 1024 deletions(-)
>>>>    delete mode 100644 drivers/gpu/drm/i2c/adv7511.c
>>>>    create mode 100644 drivers/gpu/drm/i2c/adv7511_audio.c
>>>>    create mode 100644 drivers/gpu/drm/i2c/adv7511_core.c
>>>
>>> <snip>
>>>
>>>> +
>>>> +static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id
>>>> *id)
>>>> +{
>>>> +    struct adv7511_link_config link_config;
>>>> +    struct adv7511 *adv7511;
>>>> +    struct device *dev = &i2c->dev;
>>>> +    unsigned int val;
>>>> +    int ret;
>>>> +
>>>> +    if (!dev->of_node)
>>>> +        return -EINVAL;
>>>> +
>>>> +    adv7511 = devm_kzalloc(dev, sizeof(*adv7511), GFP_KERNEL);
>>>> +    if (!adv7511)
>>>> +        return -ENOMEM;
>>>> +
>>>> +    adv7511->powered = false;
>>>> +    adv7511->status = connector_status_disconnected;
>>>> +
>>>> +    ret = adv7511_parse_dt(dev->of_node, &link_config);
>>>> +    if (ret)
>>>> +        return ret;
>>>> +
>>>> +    /*
>>>> +     * The power down GPIO is optional. If present, toggle it from active to
>>>> +     * inactive to wake up the encoder.
>>>> +     */
>>>> +    adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH);
>>>> +    if (IS_ERR(adv7511->gpio_pd))
>>>> +        return PTR_ERR(adv7511->gpio_pd);
>>>> +
>>>> +    if (adv7511->gpio_pd) {
>>>> +        mdelay(5);
>>>> +        gpiod_set_value_cansleep(adv7511->gpio_pd, 0);
>>>> +    }
>>>> +
>>>> +    adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config);
>>>> +    if (IS_ERR(adv7511->regmap))
>>>> +        return PTR_ERR(adv7511->regmap);
>>>> +
>>>> +    ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val);
>>>> +    if (ret)
>>>> +        return ret;
>>>> +    dev_dbg(dev, "Rev. %d\n", val);
>>>> +
>>>> +    ret = regmap_register_patch(adv7511->regmap, adv7511_fixed_registers,
>>>> +                    ARRAY_SIZE(adv7511_fixed_registers));
>>>> +    if (ret)
>>>> +        return ret;
>>>> +
>>>> +    regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, edid_i2c_addr);
>>>> +    regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
>>>> +             packet_i2c_addr);
>>>> +    regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR, cec_i2c_addr);
>>>> +    adv7511_packet_disable(adv7511, 0xffff);
>>>> +
>>>> +    adv7511->i2c_main = i2c;
>>>> +    adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
>>>> +    if (!adv7511->i2c_edid)
>>>> +        return -ENOMEM;
>>>> +
>>>> +    if (i2c->irq) {
>>>> +        init_waitqueue_head(&adv7511->wq);
>>>> +
>>>> +        ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
>>>> +                        adv7511_irq_handler,
>>>> +                        IRQF_ONESHOT, dev_name(dev),
>>>> +                        adv7511);
>>>> +        if (ret)
>>>> +            goto err_i2c_unregister_device;
>>>> +    }
>>>> +
>>>> +    /* CEC is unused for now */
>>>> +    regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
>>>> +             ADV7511_CEC_CTRL_POWER_DOWN);
>>>> +
>>>> +    adv7511_power_off(adv7511);
>>>> +
>>>> +    i2c_set_clientdata(i2c, adv7511);
>>>> +
>>>> +#ifdef CONFIG_DRM_I2C_ADV7511_AUDIO
>>>> +    adv7511_audio_init(&i2c->dev);
>>>> +#endif
>>>
>>> If we intend to have more audio funcs being used by the core in the
>>> future, it would be nice to have NOP audio funcs rather than having
>>> multiple #ifdef checks in the driver when CONFIG_DRM_I2C_ADV7511_AUDIO
>>> isn't set.
>>>
>>
>> I will move this ifdef to adv751_audio and use NOP functions.
>
> Thanks, I think it should help in the longer run.
>
>>
>>>> +
>>>> +    adv7511_set_link_config(adv7511, &link_config);
>>>> +
>>>> +    /* Enable HDMI mode */
>>>> +    regmap_update_bits(adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG,
>>>> +            ADV7511_HDMI_CFG_MODE_MASK,
>>>> +            ADV7511_HDMI_CFG_MODE_HDMI);
>>>> +
>>>> +    return 0;
>>>> +
>>>> +err_i2c_unregister_device:
>>>> +    i2c_unregister_device(adv7511->i2c_edid);
>>>> +
>>>> +    return ret;
>>>> +}
>>>> +
>>>> +static int adv7511_remove(struct i2c_client *i2c)
>>>> +{
>>>> +    struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
>>>> +
>>>
>>> Are we missing a call to adv7511_audio_exit() here?
>>
>> I followed the code in Analog Devices tree where there is no call to
>> audio_exit() but indeed you are correct. I will add this call.
>>
>
> Since we have 3 files for adv7511 now, could we also move the driver
> to a separate folder? The long term plan is to convert all the i2c
> slave encoder drivers to bridges. Keeping them together would be nicer
> when we migrate this driver to the bridge folder.

Ok, will move to separate folder.

>
> Thanks,
> Archit
>

Best regards,
Jose Miguel Abreu
Laurent Pinchart April 1, 2016, 5:10 p.m. UTC | #6
Hi Jose,

Thank you for the patch.

On Monday 28 Mar 2016 15:36:09 Jose Abreu wrote:
> This patch adds audio support for the ADV7511 HDMI transmitter
> using ALSA SoC.
> 
> The code was ported from Analog Devices linux tree from
> commit 1770c4a1e32b ("Merge remote-tracking branch
> 'xilinx/master' into xcomm_zynq"), which is available at:
> 	- https://github.com/analogdevicesinc/linux/
> 
> The main core file was renamed from adv7511.c to adv7511_core.c
> so that audio and video compile into a single adv7511.ko module
> and to keep up with Analog Devices kernel tree.
> 
> The audio can be disabled using menu-config so it is possible
> to use only video mode.
> 
> The HDMI mode is automatically started at boot and the audio
> (when enabled) registers as a codec into ALSA.
> 
> SPDIF DAI format was also added to ASoC as it is required
> by adv7511 audio.
> 
> Signed-off-by: Jose Abreu <joabreu@synopsys.com>
> ---
> 
> No changes v1 -> v2.
> 
>  drivers/gpu/drm/i2c/Kconfig         |   11 +
>  drivers/gpu/drm/i2c/Makefile        |    2 +
>  drivers/gpu/drm/i2c/adv7511.c       | 1024 -------------------------------
>  drivers/gpu/drm/i2c/adv7511.h       |   41 ++
>  drivers/gpu/drm/i2c/adv7511_audio.c |  310 +++++++++++
>  drivers/gpu/drm/i2c/adv7511_core.c  | 1005 ++++++++++++++++++++++++++++++

Please use git-format-patch -M to detect renames if you send a new version of 
this series, it will help with review.

>  include/sound/soc-dai.h             |    1 +
>  7 files changed, 1370 insertions(+), 1024 deletions(-)
>  delete mode 100644 drivers/gpu/drm/i2c/adv7511.c
>  create mode 100644 drivers/gpu/drm/i2c/adv7511_audio.c
>  create mode 100644 drivers/gpu/drm/i2c/adv7511_core.c

[snip]

> diff --git a/drivers/gpu/drm/i2c/adv7511_core.c
> b/drivers/gpu/drm/i2c/adv7511_core.c new file mode 100644
> index 0000000..d54256a
> --- /dev/null
> +++ b/drivers/gpu/drm/i2c/adv7511_core.c

[snip]

> +static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id
> *id) +{
> +	struct adv7511_link_config link_config;
> +	struct adv7511 *adv7511;
> +	struct device *dev = &i2c->dev;
> +	unsigned int val;
> +	int ret;
> +
> +	if (!dev->of_node)
> +		return -EINVAL;
> +
> +	adv7511 = devm_kzalloc(dev, sizeof(*adv7511), GFP_KERNEL);
> +	if (!adv7511)
> +		return -ENOMEM;
> +
> +	adv7511->powered = false;
> +	adv7511->status = connector_status_disconnected;
> +
> +	ret = adv7511_parse_dt(dev->of_node, &link_config);
> +	if (ret)
> +		return ret;
> +
> +	/*
> +	 * The power down GPIO is optional. If present, toggle it from active to
> +	 * inactive to wake up the encoder.
> +	 */
> +	adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH);
> +	if (IS_ERR(adv7511->gpio_pd))
> +		return PTR_ERR(adv7511->gpio_pd);
> +
> +	if (adv7511->gpio_pd) {
> +		mdelay(5);
> +		gpiod_set_value_cansleep(adv7511->gpio_pd, 0);
> +	}
> +
> +	adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config);
> +	if (IS_ERR(adv7511->regmap))
> +		return PTR_ERR(adv7511->regmap);
> +
> +	ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val);
> +	if (ret)
> +		return ret;
> +	dev_dbg(dev, "Rev. %d\n", val);
> +
> +	ret = regmap_register_patch(adv7511->regmap, adv7511_fixed_registers,
> +				    ARRAY_SIZE(adv7511_fixed_registers));
> +	if (ret)
> +		return ret;
> +
> +	regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, edid_i2c_addr);
> +	regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
> +		     packet_i2c_addr);
> +	regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR, cec_i2c_addr);
> +	adv7511_packet_disable(adv7511, 0xffff);
> +
> +	adv7511->i2c_main = i2c;
> +	adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
> +	if (!adv7511->i2c_edid)
> +		return -ENOMEM;
> +
> +	if (i2c->irq) {
> +		init_waitqueue_head(&adv7511->wq);
> +
> +		ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
> +						adv7511_irq_handler,
> +						IRQF_ONESHOT, dev_name(dev),
> +						adv7511);
> +		if (ret)
> +			goto err_i2c_unregister_device;
> +	}
> +
> +	/* CEC is unused for now */
> +	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
> +		     ADV7511_CEC_CTRL_POWER_DOWN);
> +
> +	adv7511_power_off(adv7511);
> +
> +	i2c_set_clientdata(i2c, adv7511);
> +
> +#ifdef CONFIG_DRM_I2C_ADV7511_AUDIO
> +	adv7511_audio_init(&i2c->dev);
> +#endif

Shouldn't we condition this to the audio channel being somehow described in DT 
? If a board doesn't route audio signals to the ADV7511 audio input, there's 
no need to register an audio codec.

> +
> +	adv7511_set_link_config(adv7511, &link_config);
> +
> +	/* Enable HDMI mode */
> +	regmap_update_bits(adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG,
> +			ADV7511_HDMI_CFG_MODE_MASK,
> +			ADV7511_HDMI_CFG_MODE_HDMI);
> +
> +	return 0;
> +
> +err_i2c_unregister_device:
> +	i2c_unregister_device(adv7511->i2c_edid);
> +
> +	return ret;
> +}
kernel test robot April 3, 2016, 5:05 a.m. UTC | #7
Hi Jose,

[auto build test ERROR on drm/drm-next]
[also build test ERROR on v4.6-rc1 next-20160401]
[if your patch is applied to the wrong git tree, please drop us a note to help improving the system]

url:    https://github.com/0day-ci/linux/commits/Jose-Abreu/Add-I2S-ADV7511-audio-support-for-ARC-AXS10x-boards/20160328-224040
base:   git://people.freedesktop.org/~airlied/linux.git drm-next
config: x86_64-randconfig-s5-04031201 (attached as .config)
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

All errors (new ones prefixed by >>):

   drivers/built-in.o: In function `adv7511_audio_init':
>> (.text+0x1c608b): undefined reference to `snd_soc_register_codec'
   drivers/built-in.o: In function `adv7511_audio_exit':
>> (.text+0x1c6096): undefined reference to `snd_soc_unregister_codec'

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
Jose Abreu April 4, 2016, 9:05 a.m. UTC | #8
Hi Laurent,


On 01-04-2016 18:10, Laurent Pinchart wrote:
> Hi Jose,
>
> Thank you for the patch.
>
> On Monday 28 Mar 2016 15:36:09 Jose Abreu wrote:
>> This patch adds audio support for the ADV7511 HDMI transmitter
>> using ALSA SoC.
>>
>> The code was ported from Analog Devices linux tree from
>> commit 1770c4a1e32b ("Merge remote-tracking branch
>> 'xilinx/master' into xcomm_zynq"), which is available at:
>> 	- https://github.com/analogdevicesinc/linux/
>>
>> The main core file was renamed from adv7511.c to adv7511_core.c
>> so that audio and video compile into a single adv7511.ko module
>> and to keep up with Analog Devices kernel tree.
>>
>> The audio can be disabled using menu-config so it is possible
>> to use only video mode.
>>
>> The HDMI mode is automatically started at boot and the audio
>> (when enabled) registers as a codec into ALSA.
>>
>> SPDIF DAI format was also added to ASoC as it is required
>> by adv7511 audio.
>>
>> Signed-off-by: Jose Abreu <joabreu@synopsys.com>
>> ---
>>
>> No changes v1 -> v2.
>>
>>  drivers/gpu/drm/i2c/Kconfig         |   11 +
>>  drivers/gpu/drm/i2c/Makefile        |    2 +
>>  drivers/gpu/drm/i2c/adv7511.c       | 1024 -------------------------------
>>  drivers/gpu/drm/i2c/adv7511.h       |   41 ++
>>  drivers/gpu/drm/i2c/adv7511_audio.c |  310 +++++++++++
>>  drivers/gpu/drm/i2c/adv7511_core.c  | 1005 ++++++++++++++++++++++++++++++
> Please use git-format-patch -M to detect renames if you send a new version of 
> this series, it will help with review.

Ok, will do that in next version.

>>  include/sound/soc-dai.h             |    1 +
>>  7 files changed, 1370 insertions(+), 1024 deletions(-)
>>  delete mode 100644 drivers/gpu/drm/i2c/adv7511.c
>>  create mode 100644 drivers/gpu/drm/i2c/adv7511_audio.c
>>  create mode 100644 drivers/gpu/drm/i2c/adv7511_core.c
> [snip]
>
>> diff --git a/drivers/gpu/drm/i2c/adv7511_core.c
>> b/drivers/gpu/drm/i2c/adv7511_core.c new file mode 100644
>> index 0000000..d54256a
>> --- /dev/null
>> +++ b/drivers/gpu/drm/i2c/adv7511_core.c
> [snip]
>
>> +static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id
>> *id) +{
>> +	struct adv7511_link_config link_config;
>> +	struct adv7511 *adv7511;
>> +	struct device *dev = &i2c->dev;
>> +	unsigned int val;
>> +	int ret;
>> +
>> +	if (!dev->of_node)
>> +		return -EINVAL;
>> +
>> +	adv7511 = devm_kzalloc(dev, sizeof(*adv7511), GFP_KERNEL);
>> +	if (!adv7511)
>> +		return -ENOMEM;
>> +
>> +	adv7511->powered = false;
>> +	adv7511->status = connector_status_disconnected;
>> +
>> +	ret = adv7511_parse_dt(dev->of_node, &link_config);
>> +	if (ret)
>> +		return ret;
>> +
>> +	/*
>> +	 * The power down GPIO is optional. If present, toggle it from active to
>> +	 * inactive to wake up the encoder.
>> +	 */
>> +	adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH);
>> +	if (IS_ERR(adv7511->gpio_pd))
>> +		return PTR_ERR(adv7511->gpio_pd);
>> +
>> +	if (adv7511->gpio_pd) {
>> +		mdelay(5);
>> +		gpiod_set_value_cansleep(adv7511->gpio_pd, 0);
>> +	}
>> +
>> +	adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config);
>> +	if (IS_ERR(adv7511->regmap))
>> +		return PTR_ERR(adv7511->regmap);
>> +
>> +	ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val);
>> +	if (ret)
>> +		return ret;
>> +	dev_dbg(dev, "Rev. %d\n", val);
>> +
>> +	ret = regmap_register_patch(adv7511->regmap, adv7511_fixed_registers,
>> +				    ARRAY_SIZE(adv7511_fixed_registers));
>> +	if (ret)
>> +		return ret;
>> +
>> +	regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, edid_i2c_addr);
>> +	regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
>> +		     packet_i2c_addr);
>> +	regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR, cec_i2c_addr);
>> +	adv7511_packet_disable(adv7511, 0xffff);
>> +
>> +	adv7511->i2c_main = i2c;
>> +	adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
>> +	if (!adv7511->i2c_edid)
>> +		return -ENOMEM;
>> +
>> +	if (i2c->irq) {
>> +		init_waitqueue_head(&adv7511->wq);
>> +
>> +		ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
>> +						adv7511_irq_handler,
>> +						IRQF_ONESHOT, dev_name(dev),
>> +						adv7511);
>> +		if (ret)
>> +			goto err_i2c_unregister_device;
>> +	}
>> +
>> +	/* CEC is unused for now */
>> +	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
>> +		     ADV7511_CEC_CTRL_POWER_DOWN);
>> +
>> +	adv7511_power_off(adv7511);
>> +
>> +	i2c_set_clientdata(i2c, adv7511);
>> +
>> +#ifdef CONFIG_DRM_I2C_ADV7511_AUDIO
>> +	adv7511_audio_init(&i2c->dev);
>> +#endif
> Shouldn't we condition this to the audio channel being somehow described in DT 
> ? If a board doesn't route audio signals to the ADV7511 audio input, there's 
> no need to register an audio codec.

I can do this but the audio is already conditionally compiled using menuconfig.
Is it really necessary to add this extra layer of condition?

>> +
>> +	adv7511_set_link_config(adv7511, &link_config);
>> +
>> +	/* Enable HDMI mode */
>> +	regmap_update_bits(adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG,
>> +			ADV7511_HDMI_CFG_MODE_MASK,
>> +			ADV7511_HDMI_CFG_MODE_HDMI);
>> +
>> +	return 0;
>> +
>> +err_i2c_unregister_device:
>> +	i2c_unregister_device(adv7511->i2c_edid);
>> +
>> +	return ret;
>> +}

Best regards,
Jose Miguel Abreu
Laurent Pinchart April 4, 2016, 9:41 p.m. UTC | #9
Hi Jose,

On Monday 04 Apr 2016 10:05:39 Jose Abreu wrote:
> On 01-04-2016 18:10, Laurent Pinchart wrote:
> > On Monday 28 Mar 2016 15:36:09 Jose Abreu wrote:
> >> This patch adds audio support for the ADV7511 HDMI transmitter
> >> using ALSA SoC.
> >> 
> >> The code was ported from Analog Devices linux tree from
> >> commit 1770c4a1e32b ("Merge remote-tracking branch
> >> 
> >> 'xilinx/master' into xcomm_zynq"), which is available at:
> >> 	- https://github.com/analogdevicesinc/linux/
> >> 
> >> The main core file was renamed from adv7511.c to adv7511_core.c
> >> so that audio and video compile into a single adv7511.ko module
> >> and to keep up with Analog Devices kernel tree.
> >> 
> >> The audio can be disabled using menu-config so it is possible
> >> to use only video mode.
> >> 
> >> The HDMI mode is automatically started at boot and the audio
> >> (when enabled) registers as a codec into ALSA.
> >> 
> >> SPDIF DAI format was also added to ASoC as it is required
> >> by adv7511 audio.
> >> 
> >> Signed-off-by: Jose Abreu <joabreu@synopsys.com>
> >> ---
> >> 
> >> No changes v1 -> v2.
> >> 
> >>  drivers/gpu/drm/i2c/Kconfig         |   11 +
> >>  drivers/gpu/drm/i2c/Makefile        |    2 +
> >>  drivers/gpu/drm/i2c/adv7511.c       | 1024 ----------------------------
> >>  drivers/gpu/drm/i2c/adv7511.h       |   41 ++
> >>  drivers/gpu/drm/i2c/adv7511_audio.c |  310 +++++++++++
> >>  drivers/gpu/drm/i2c/adv7511_core.c  | 1005 ++++++++++++++++++++++++++++
> > 
> > Please use git-format-patch -M to detect renames if you send a new version
> > of this series, it will help with review.
> 
> Ok, will do that in next version.
> 
> >>  include/sound/soc-dai.h             |    1 +
> >>  7 files changed, 1370 insertions(+), 1024 deletions(-)
> >>  delete mode 100644 drivers/gpu/drm/i2c/adv7511.c
> >>  create mode 100644 drivers/gpu/drm/i2c/adv7511_audio.c
> >>  create mode 100644 drivers/gpu/drm/i2c/adv7511_core.c
> > 
> > [snip]
> > 
> >> diff --git a/drivers/gpu/drm/i2c/adv7511_core.c
> >> b/drivers/gpu/drm/i2c/adv7511_core.c new file mode 100644
> >> index 0000000..d54256a
> >> --- /dev/null
> >> +++ b/drivers/gpu/drm/i2c/adv7511_core.c
> > 
> > [snip]
> > 
> >> +static int adv7511_probe(struct i2c_client *i2c, const struct
> >> i2c_device_id *id) +{
> >> +	struct adv7511_link_config link_config;
> >> +	struct adv7511 *adv7511;
> >> +	struct device *dev = &i2c->dev;
> >> +	unsigned int val;
> >> +	int ret;
> >> +
> >> +	if (!dev->of_node)
> >> +		return -EINVAL;
> >> +
> >> +	adv7511 = devm_kzalloc(dev, sizeof(*adv7511), GFP_KERNEL);
> >> +	if (!adv7511)
> >> +		return -ENOMEM;
> >> +
> >> +	adv7511->powered = false;
> >> +	adv7511->status = connector_status_disconnected;
> >> +
> >> +	ret = adv7511_parse_dt(dev->of_node, &link_config);
> >> +	if (ret)
> >> +		return ret;
> >> +
> >> +	/*
> >> +	 * The power down GPIO is optional. If present, toggle it from active
> >> to
> >> +	 * inactive to wake up the encoder.
> >> +	 */
> >> +	adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd", 
GPIOD_OUT_HIGH);
> >> +	if (IS_ERR(adv7511->gpio_pd))
> >> +		return PTR_ERR(adv7511->gpio_pd);
> >> +
> >> +	if (adv7511->gpio_pd) {
> >> +		mdelay(5);
> >> +		gpiod_set_value_cansleep(adv7511->gpio_pd, 0);
> >> +	}
> >> +
> >> +	adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config);
> >> +	if (IS_ERR(adv7511->regmap))
> >> +		return PTR_ERR(adv7511->regmap);
> >> +
> >> +	ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val);
> >> +	if (ret)
> >> +		return ret;
> >> +	dev_dbg(dev, "Rev. %d\n", val);
> >> +
> >> +	ret = regmap_register_patch(adv7511->regmap, adv7511_fixed_registers,
> >> +				    ARRAY_SIZE(adv7511_fixed_registers));
> >> +	if (ret)
> >> +		return ret;
> >> +
> >> +	regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR,
> >> edid_i2c_addr);
> >> +	regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
> >> +		     packet_i2c_addr);
> >> +	regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR, 
cec_i2c_addr);
> >> +	adv7511_packet_disable(adv7511, 0xffff);
> >> +
> >> +	adv7511->i2c_main = i2c;
> >> +	adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
> >> +	if (!adv7511->i2c_edid)
> >> +		return -ENOMEM;
> >> +
> >> +	if (i2c->irq) {
> >> +		init_waitqueue_head(&adv7511->wq);
> >> +
> >> +		ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
> >> +						adv7511_irq_handler,
> >> +						IRQF_ONESHOT, dev_name(dev),
> >> +						adv7511);
> >> +		if (ret)
> >> +			goto err_i2c_unregister_device;
> >> +	}
> >> +
> >> +	/* CEC is unused for now */
> >> +	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
> >> +		     ADV7511_CEC_CTRL_POWER_DOWN);
> >> +
> >> +	adv7511_power_off(adv7511);
> >> +
> >> +	i2c_set_clientdata(i2c, adv7511);
> >> +
> >> +#ifdef CONFIG_DRM_I2C_ADV7511_AUDIO
> >> +	adv7511_audio_init(&i2c->dev);
> >> +#endif
> > 
> > Shouldn't we condition this to the audio channel being somehow described
> > in DT ? If a board doesn't route audio signals to the ADV7511 audio
> > input, there's no need to register an audio codec.
> 
> I can do this but the audio is already conditionally compiled using
> menuconfig. Is it really necessary to add this extra layer of condition?

The idea is that enabling support for ADV7511 audio in the kernel isn't 
coupled with whether the system includes audio support. It would be confusing, 
and would also waste resources, to create a Linux sound device when no sound 
channel is routed on the board.

> >> +
> >> +	adv7511_set_link_config(adv7511, &link_config);
> >> +
> >> +	/* Enable HDMI mode */
> >> +	regmap_update_bits(adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG,
> >> +			ADV7511_HDMI_CFG_MODE_MASK,
> >> +			ADV7511_HDMI_CFG_MODE_HDMI);
> >> +
> >> +	return 0;
> >> +
> >> +err_i2c_unregister_device:
> >> +	i2c_unregister_device(adv7511->i2c_edid);
> >> +
> >> +	return ret;
> >> +}
Jose Abreu April 5, 2016, 11 a.m. UTC | #10
Hi Laurent,


On 04-04-2016 22:41, Laurent Pinchart wrote:
> Hi Jose,
>
> On Monday 04 Apr 2016 10:05:39 Jose Abreu wrote:
>> On 01-04-2016 18:10, Laurent Pinchart wrote:
>>> On Monday 28 Mar 2016 15:36:09 Jose Abreu wrote:
>>>> This patch adds audio support for the ADV7511 HDMI transmitter
>>>> using ALSA SoC.
>>>>
>>>> The code was ported from Analog Devices linux tree from
>>>> commit 1770c4a1e32b ("Merge remote-tracking branch
>>>>
>>>> 'xilinx/master' into xcomm_zynq"), which is available at:
>>>> 	- https://github.com/analogdevicesinc/linux/
>>>>
>>>> The main core file was renamed from adv7511.c to adv7511_core.c
>>>> so that audio and video compile into a single adv7511.ko module
>>>> and to keep up with Analog Devices kernel tree.
>>>>
>>>> The audio can be disabled using menu-config so it is possible
>>>> to use only video mode.
>>>>
>>>> The HDMI mode is automatically started at boot and the audio
>>>> (when enabled) registers as a codec into ALSA.
>>>>
>>>> SPDIF DAI format was also added to ASoC as it is required
>>>> by adv7511 audio.
>>>>
>>>> Signed-off-by: Jose Abreu <joabreu@synopsys.com>
>>>> ---
>>>>
>>>> No changes v1 -> v2.
>>>>
>>>>  drivers/gpu/drm/i2c/Kconfig         |   11 +
>>>>  drivers/gpu/drm/i2c/Makefile        |    2 +
>>>>  drivers/gpu/drm/i2c/adv7511.c       | 1024 ----------------------------
>>>>  drivers/gpu/drm/i2c/adv7511.h       |   41 ++
>>>>  drivers/gpu/drm/i2c/adv7511_audio.c |  310 +++++++++++
>>>>  drivers/gpu/drm/i2c/adv7511_core.c  | 1005 ++++++++++++++++++++++++++++
>>> Please use git-format-patch -M to detect renames if you send a new version
>>> of this series, it will help with review.
>> Ok, will do that in next version.
>>
>>>>  include/sound/soc-dai.h             |    1 +
>>>>  7 files changed, 1370 insertions(+), 1024 deletions(-)
>>>>  delete mode 100644 drivers/gpu/drm/i2c/adv7511.c
>>>>  create mode 100644 drivers/gpu/drm/i2c/adv7511_audio.c
>>>>  create mode 100644 drivers/gpu/drm/i2c/adv7511_core.c
>>> [snip]
>>>
>>>> diff --git a/drivers/gpu/drm/i2c/adv7511_core.c
>>>> b/drivers/gpu/drm/i2c/adv7511_core.c new file mode 100644
>>>> index 0000000..d54256a
>>>> --- /dev/null
>>>> +++ b/drivers/gpu/drm/i2c/adv7511_core.c
>>> [snip]
>>>
>>>> +static int adv7511_probe(struct i2c_client *i2c, const struct
>>>> i2c_device_id *id) +{
>>>> +	struct adv7511_link_config link_config;
>>>> +	struct adv7511 *adv7511;
>>>> +	struct device *dev = &i2c->dev;
>>>> +	unsigned int val;
>>>> +	int ret;
>>>> +
>>>> +	if (!dev->of_node)
>>>> +		return -EINVAL;
>>>> +
>>>> +	adv7511 = devm_kzalloc(dev, sizeof(*adv7511), GFP_KERNEL);
>>>> +	if (!adv7511)
>>>> +		return -ENOMEM;
>>>> +
>>>> +	adv7511->powered = false;
>>>> +	adv7511->status = connector_status_disconnected;
>>>> +
>>>> +	ret = adv7511_parse_dt(dev->of_node, &link_config);
>>>> +	if (ret)
>>>> +		return ret;
>>>> +
>>>> +	/*
>>>> +	 * The power down GPIO is optional. If present, toggle it from active
>>>> to
>>>> +	 * inactive to wake up the encoder.
>>>> +	 */
>>>> +	adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd", 
> GPIOD_OUT_HIGH);
>>>> +	if (IS_ERR(adv7511->gpio_pd))
>>>> +		return PTR_ERR(adv7511->gpio_pd);
>>>> +
>>>> +	if (adv7511->gpio_pd) {
>>>> +		mdelay(5);
>>>> +		gpiod_set_value_cansleep(adv7511->gpio_pd, 0);
>>>> +	}
>>>> +
>>>> +	adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config);
>>>> +	if (IS_ERR(adv7511->regmap))
>>>> +		return PTR_ERR(adv7511->regmap);
>>>> +
>>>> +	ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val);
>>>> +	if (ret)
>>>> +		return ret;
>>>> +	dev_dbg(dev, "Rev. %d\n", val);
>>>> +
>>>> +	ret = regmap_register_patch(adv7511->regmap, adv7511_fixed_registers,
>>>> +				    ARRAY_SIZE(adv7511_fixed_registers));
>>>> +	if (ret)
>>>> +		return ret;
>>>> +
>>>> +	regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR,
>>>> edid_i2c_addr);
>>>> +	regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
>>>> +		     packet_i2c_addr);
>>>> +	regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR, 
> cec_i2c_addr);
>>>> +	adv7511_packet_disable(adv7511, 0xffff);
>>>> +
>>>> +	adv7511->i2c_main = i2c;
>>>> +	adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
>>>> +	if (!adv7511->i2c_edid)
>>>> +		return -ENOMEM;
>>>> +
>>>> +	if (i2c->irq) {
>>>> +		init_waitqueue_head(&adv7511->wq);
>>>> +
>>>> +		ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
>>>> +						adv7511_irq_handler,
>>>> +						IRQF_ONESHOT, dev_name(dev),
>>>> +						adv7511);
>>>> +		if (ret)
>>>> +			goto err_i2c_unregister_device;
>>>> +	}
>>>> +
>>>> +	/* CEC is unused for now */
>>>> +	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
>>>> +		     ADV7511_CEC_CTRL_POWER_DOWN);
>>>> +
>>>> +	adv7511_power_off(adv7511);
>>>> +
>>>> +	i2c_set_clientdata(i2c, adv7511);
>>>> +
>>>> +#ifdef CONFIG_DRM_I2C_ADV7511_AUDIO
>>>> +	adv7511_audio_init(&i2c->dev);
>>>> +#endif
>>> Shouldn't we condition this to the audio channel being somehow described
>>> in DT ? If a board doesn't route audio signals to the ADV7511 audio
>>> input, there's no need to register an audio codec.
>> I can do this but the audio is already conditionally compiled using
>> menuconfig. Is it really necessary to add this extra layer of condition?
> The idea is that enabling support for ADV7511 audio in the kernel isn't 
> coupled with whether the system includes audio support. It would be confusing, 
> and would also waste resources, to create a Linux sound device when no sound 
> channel is routed on the board.

Ok, will do that in next version. Another question: I am facing a problem when
compiling ALSA as a module, as the ADV7511 audio is not embedded into ALSA the
compilation fails with undefined references to ALSA functions. The solution that
I am planning to use is to add a default value to the ADV7511 kconfig entry so
that the driver is compiled as module when ALSA is a module and as embedded if
ALSA is embedded. Is this okay or is there another solution without moving the
ADV7511 audio to the ALSA directory?

>
>>>> +
>>>> +	adv7511_set_link_config(adv7511, &link_config);
>>>> +
>>>> +	/* Enable HDMI mode */
>>>> +	regmap_update_bits(adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG,
>>>> +			ADV7511_HDMI_CFG_MODE_MASK,
>>>> +			ADV7511_HDMI_CFG_MODE_HDMI);
>>>> +
>>>> +	return 0;
>>>> +
>>>> +err_i2c_unregister_device:
>>>> +	i2c_unregister_device(adv7511->i2c_edid);
>>>> +
>>>> +	return ret;
>>>> +}

Best regards,
Jose Miguel Abreu
Laurent Pinchart April 5, 2016, 4:03 p.m. UTC | #11
Hi Jose,

On Tuesday 05 Apr 2016 12:00:54 Jose Abreu wrote:
> On 04-04-2016 22:41, Laurent Pinchart wrote:
> > On Monday 04 Apr 2016 10:05:39 Jose Abreu wrote:
> >> On 01-04-2016 18:10, Laurent Pinchart wrote:
> >>> On Monday 28 Mar 2016 15:36:09 Jose Abreu wrote:
> >>>> This patch adds audio support for the ADV7511 HDMI transmitter
> >>>> using ALSA SoC.
> >>>> 
> >>>> The code was ported from Analog Devices linux tree from
> >>>> commit 1770c4a1e32b ("Merge remote-tracking branch
> >>>> 
> >>>> 'xilinx/master' into xcomm_zynq"), which is available at:
> >>>> 	- https://github.com/analogdevicesinc/linux/
> >>>> 
> >>>> The main core file was renamed from adv7511.c to adv7511_core.c
> >>>> so that audio and video compile into a single adv7511.ko module
> >>>> and to keep up with Analog Devices kernel tree.
> >>>> 
> >>>> The audio can be disabled using menu-config so it is possible
> >>>> to use only video mode.
> >>>> 
> >>>> The HDMI mode is automatically started at boot and the audio
> >>>> (when enabled) registers as a codec into ALSA.
> >>>> 
> >>>> SPDIF DAI format was also added to ASoC as it is required
> >>>> by adv7511 audio.
> >>>> 
> >>>> Signed-off-by: Jose Abreu <joabreu@synopsys.com>
> >>>> ---
> >>>> 
> >>>> No changes v1 -> v2.
> >>>> 
> >>>>  drivers/gpu/drm/i2c/Kconfig         |   11 +
> >>>>  drivers/gpu/drm/i2c/Makefile        |    2 +
> >>>>  drivers/gpu/drm/i2c/adv7511.c       | 1024
> >>>>  ----------------------------
> >>>>  drivers/gpu/drm/i2c/adv7511.h       |   41 ++
> >>>>  drivers/gpu/drm/i2c/adv7511_audio.c |  310 +++++++++++
> >>>>  drivers/gpu/drm/i2c/adv7511_core.c  | 1005
> >>>>  ++++++++++++++++++++++++++++
> >>> 
> >>> Please use git-format-patch -M to detect renames if you send a new
> >>> version
> >>> of this series, it will help with review.
> >> 
> >> Ok, will do that in next version.
> >> 
> >>>>  include/sound/soc-dai.h             |    1 +
> >>>>  7 files changed, 1370 insertions(+), 1024 deletions(-)
> >>>>  delete mode 100644 drivers/gpu/drm/i2c/adv7511.c
> >>>>  create mode 100644 drivers/gpu/drm/i2c/adv7511_audio.c
> >>>>  create mode 100644 drivers/gpu/drm/i2c/adv7511_core.c
> >>> 
> >>> [snip]
> >>> 
> >>>> diff --git a/drivers/gpu/drm/i2c/adv7511_core.c
> >>>> b/drivers/gpu/drm/i2c/adv7511_core.c new file mode 100644
> >>>> index 0000000..d54256a
> >>>> --- /dev/null
> >>>> +++ b/drivers/gpu/drm/i2c/adv7511_core.c
> >>> 
> >>> [snip]
> >>> 
> >>>> +static int adv7511_probe(struct i2c_client *i2c, const struct
> >>>> i2c_device_id *id) +{
> >>>> +	struct adv7511_link_config link_config;
> >>>> +	struct adv7511 *adv7511;
> >>>> +	struct device *dev = &i2c->dev;
> >>>> +	unsigned int val;
> >>>> +	int ret;
> >>>> +
> >>>> +	if (!dev->of_node)
> >>>> +		return -EINVAL;
> >>>> +
> >>>> +	adv7511 = devm_kzalloc(dev, sizeof(*adv7511), GFP_KERNEL);
> >>>> +	if (!adv7511)
> >>>> +		return -ENOMEM;
> >>>> +
> >>>> +	adv7511->powered = false;
> >>>> +	adv7511->status = connector_status_disconnected;
> >>>> +
> >>>> +	ret = adv7511_parse_dt(dev->of_node, &link_config);
> >>>> +	if (ret)
> >>>> +		return ret;
> >>>> +
> >>>> +	/*
> >>>> +	 * The power down GPIO is optional. If present, toggle it from active
> >>>> to
> >>>> +	 * inactive to wake up the encoder.
> >>>> +	 */
> >>>> +	adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd",
> > 
> > GPIOD_OUT_HIGH);
> > 
> >>>> +	if (IS_ERR(adv7511->gpio_pd))
> >>>> +		return PTR_ERR(adv7511->gpio_pd);
> >>>> +
> >>>> +	if (adv7511->gpio_pd) {
> >>>> +		mdelay(5);
> >>>> +		gpiod_set_value_cansleep(adv7511->gpio_pd, 0);
> >>>> +	}
> >>>> +
> >>>> +	adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config);
> >>>> +	if (IS_ERR(adv7511->regmap))
> >>>> +		return PTR_ERR(adv7511->regmap);
> >>>> +
> >>>> +	ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val);
> >>>> +	if (ret)
> >>>> +		return ret;
> >>>> +	dev_dbg(dev, "Rev. %d\n", val);
> >>>> +
> >>>> +	ret = regmap_register_patch(adv7511->regmap, adv7511_fixed_registers,
> >>>> +				    ARRAY_SIZE(adv7511_fixed_registers));
> >>>> +	if (ret)
> >>>> +		return ret;
> >>>> +
> >>>> +	regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR,
> >>>> edid_i2c_addr);
> >>>> +	regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
> >>>> +		     packet_i2c_addr);
> >>>> +	regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR,
> > 
> > cec_i2c_addr);
> > 
> >>>> +	adv7511_packet_disable(adv7511, 0xffff);
> >>>> +
> >>>> +	adv7511->i2c_main = i2c;
> >>>> +	adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
> >>>> +	if (!adv7511->i2c_edid)
> >>>> +		return -ENOMEM;
> >>>> +
> >>>> +	if (i2c->irq) {
> >>>> +		init_waitqueue_head(&adv7511->wq);
> >>>> +
> >>>> +		ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
> >>>> +						adv7511_irq_handler,
> >>>> +						IRQF_ONESHOT, dev_name(dev),
> >>>> +						adv7511);
> >>>> +		if (ret)
> >>>> +			goto err_i2c_unregister_device;
> >>>> +	}
> >>>> +
> >>>> +	/* CEC is unused for now */
> >>>> +	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
> >>>> +		     ADV7511_CEC_CTRL_POWER_DOWN);
> >>>> +
> >>>> +	adv7511_power_off(adv7511);
> >>>> +
> >>>> +	i2c_set_clientdata(i2c, adv7511);
> >>>> +
> >>>> +#ifdef CONFIG_DRM_I2C_ADV7511_AUDIO
> >>>> +	adv7511_audio_init(&i2c->dev);
> >>>> +#endif
> >>> 
> >>> Shouldn't we condition this to the audio channel being somehow described
> >>> in DT ? If a board doesn't route audio signals to the ADV7511 audio
> >>> input, there's no need to register an audio codec.
> >> 
> >> I can do this but the audio is already conditionally compiled using
> >> menuconfig. Is it really necessary to add this extra layer of condition?
> > 
> > The idea is that enabling support for ADV7511 audio in the kernel isn't
> > coupled with whether the system includes audio support. It would be
> > confusing, and would also waste resources, to create a Linux sound device
> > when no sound channel is routed on the board.
> 
> Ok, will do that in next version. Another question: I am facing a problem
> when compiling ALSA as a module, as the ADV7511 audio is not embedded into
> ALSA the compilation fails with undefined references to ALSA functions. The
> solution that I am planning to use is to add a default value to the ADV7511
> kconfig entry so that the driver is compiled as module when ALSA is a
> module and as embedded if ALSA is embedded. Is this okay or is there
> another solution without moving the ADV7511 audio to the ALSA directory?

You can write the Kconfig dependency as

depends on DRM_I2C_ADV7511
depends on SND_SOC=y || (SND_SOC && DRM_I2C_ADV7511=m)

> >>>> +
> >>>> +	adv7511_set_link_config(adv7511, &link_config);
> >>>> +
> >>>> +	/* Enable HDMI mode */
> >>>> +	regmap_update_bits(adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG,
> >>>> +			ADV7511_HDMI_CFG_MODE_MASK,
> >>>> +			ADV7511_HDMI_CFG_MODE_HDMI);
> >>>> +
> >>>> +	return 0;
> >>>> +
> >>>> +err_i2c_unregister_device:
> >>>> +	i2c_unregister_device(adv7511->i2c_edid);
> >>>> +
> >>>> +	return ret;
> >>>> +}
diff mbox

Patch

diff --git a/drivers/gpu/drm/i2c/Kconfig b/drivers/gpu/drm/i2c/Kconfig
index 22c7ed6..baed409 100644
--- a/drivers/gpu/drm/i2c/Kconfig
+++ b/drivers/gpu/drm/i2c/Kconfig
@@ -7,6 +7,17 @@  config DRM_I2C_ADV7511
 	help
 	  Support for the Analog Device ADV7511(W) and ADV7513 HDMI encoders.
 
+config DRM_I2C_ADV7511_AUDIO
+	bool "ADV7511 audio"
+	depends on DRM_I2C_ADV7511 && SND_SOC
+	default y
+	help
+	  This adds support for audio on the ADV7511(W) and ADV7513 HDMI
+	  encoders.
+
+	  By selecting this option the ADV7511 will register a codec interface
+	  into ALSA.
+
 config DRM_I2C_CH7006
 	tristate "Chrontel ch7006 TV encoder"
 	default m if DRM_NOUVEAU
diff --git a/drivers/gpu/drm/i2c/Makefile b/drivers/gpu/drm/i2c/Makefile
index 2c72eb5..7fae13b9 100644
--- a/drivers/gpu/drm/i2c/Makefile
+++ b/drivers/gpu/drm/i2c/Makefile
@@ -1,5 +1,7 @@ 
 ccflags-y := -Iinclude/drm
 
+adv7511-y := adv7511_core.o
+adv7511-$(CONFIG_DRM_I2C_ADV7511_AUDIO) += adv7511_audio.o
 obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511.o
 
 ch7006-y := ch7006_drv.o ch7006_mode.o
diff --git a/drivers/gpu/drm/i2c/adv7511.c b/drivers/gpu/drm/i2c/adv7511.c
deleted file mode 100644
index a02112b..0000000
--- a/drivers/gpu/drm/i2c/adv7511.c
+++ /dev/null
@@ -1,1024 +0,0 @@ 
-/*
- * Analog Devices ADV7511 HDMI transmitter driver
- *
- * Copyright 2012 Analog Devices Inc.
- *
- * Licensed under the GPL-2.
- */
-
-#include <linux/device.h>
-#include <linux/gpio/consumer.h>
-#include <linux/i2c.h>
-#include <linux/module.h>
-#include <linux/regmap.h>
-#include <linux/slab.h>
-
-#include <drm/drmP.h>
-#include <drm/drm_crtc_helper.h>
-#include <drm/drm_edid.h>
-#include <drm/drm_encoder_slave.h>
-
-#include "adv7511.h"
-
-struct adv7511 {
-	struct i2c_client *i2c_main;
-	struct i2c_client *i2c_edid;
-
-	struct regmap *regmap;
-	struct regmap *packet_memory_regmap;
-	enum drm_connector_status status;
-	bool powered;
-
-	unsigned int f_tmds;
-
-	unsigned int current_edid_segment;
-	uint8_t edid_buf[256];
-	bool edid_read;
-
-	wait_queue_head_t wq;
-	struct drm_encoder *encoder;
-
-	bool embedded_sync;
-	enum adv7511_sync_polarity vsync_polarity;
-	enum adv7511_sync_polarity hsync_polarity;
-	bool rgb;
-
-	struct edid *edid;
-
-	struct gpio_desc *gpio_pd;
-};
-
-static struct adv7511 *encoder_to_adv7511(struct drm_encoder *encoder)
-{
-	return to_encoder_slave(encoder)->slave_priv;
-}
-
-/* ADI recommended values for proper operation. */
-static const struct reg_sequence adv7511_fixed_registers[] = {
-	{ 0x98, 0x03 },
-	{ 0x9a, 0xe0 },
-	{ 0x9c, 0x30 },
-	{ 0x9d, 0x61 },
-	{ 0xa2, 0xa4 },
-	{ 0xa3, 0xa4 },
-	{ 0xe0, 0xd0 },
-	{ 0xf9, 0x00 },
-	{ 0x55, 0x02 },
-};
-
-/* -----------------------------------------------------------------------------
- * Register access
- */
-
-static const uint8_t adv7511_register_defaults[] = {
-	0x12, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 00 */
-	0x00, 0x00, 0x01, 0x0e, 0xbc, 0x18, 0x01, 0x13,
-	0x25, 0x37, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 10 */
-	0x46, 0x62, 0x04, 0xa8, 0x00, 0x00, 0x1c, 0x84,
-	0x1c, 0xbf, 0x04, 0xa8, 0x1e, 0x70, 0x02, 0x1e, /* 20 */
-	0x00, 0x00, 0x04, 0xa8, 0x08, 0x12, 0x1b, 0xac,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 30 */
-	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0xb0,
-	0x00, 0x50, 0x90, 0x7e, 0x79, 0x70, 0x00, 0x00, /* 40 */
-	0x00, 0xa8, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x02, 0x0d, 0x00, 0x00, 0x00, 0x00, /* 50 */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 60 */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x01, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 70 */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 80 */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, /* 90 */
-	0x0b, 0x02, 0x00, 0x18, 0x5a, 0x60, 0x00, 0x00,
-	0x00, 0x00, 0x80, 0x80, 0x08, 0x04, 0x00, 0x00, /* a0 */
-	0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x14,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b0 */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c0 */
-	0x00, 0x03, 0x00, 0x00, 0x02, 0x00, 0x01, 0x04,
-	0x30, 0xff, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, /* d0 */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x01,
-	0x80, 0x75, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, /* e0 */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x75, 0x11, 0x00, /* f0 */
-	0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-};
-
-static bool adv7511_register_volatile(struct device *dev, unsigned int reg)
-{
-	switch (reg) {
-	case ADV7511_REG_CHIP_REVISION:
-	case ADV7511_REG_SPDIF_FREQ:
-	case ADV7511_REG_CTS_AUTOMATIC1:
-	case ADV7511_REG_CTS_AUTOMATIC2:
-	case ADV7511_REG_VIC_DETECTED:
-	case ADV7511_REG_VIC_SEND:
-	case ADV7511_REG_AUX_VIC_DETECTED:
-	case ADV7511_REG_STATUS:
-	case ADV7511_REG_GC(1):
-	case ADV7511_REG_INT(0):
-	case ADV7511_REG_INT(1):
-	case ADV7511_REG_PLL_STATUS:
-	case ADV7511_REG_AN(0):
-	case ADV7511_REG_AN(1):
-	case ADV7511_REG_AN(2):
-	case ADV7511_REG_AN(3):
-	case ADV7511_REG_AN(4):
-	case ADV7511_REG_AN(5):
-	case ADV7511_REG_AN(6):
-	case ADV7511_REG_AN(7):
-	case ADV7511_REG_HDCP_STATUS:
-	case ADV7511_REG_BCAPS:
-	case ADV7511_REG_BKSV(0):
-	case ADV7511_REG_BKSV(1):
-	case ADV7511_REG_BKSV(2):
-	case ADV7511_REG_BKSV(3):
-	case ADV7511_REG_BKSV(4):
-	case ADV7511_REG_DDC_STATUS:
-	case ADV7511_REG_EDID_READ_CTRL:
-	case ADV7511_REG_BSTATUS(0):
-	case ADV7511_REG_BSTATUS(1):
-	case ADV7511_REG_CHIP_ID_HIGH:
-	case ADV7511_REG_CHIP_ID_LOW:
-		return true;
-	}
-
-	return false;
-}
-
-static const struct regmap_config adv7511_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-
-	.max_register = 0xff,
-	.cache_type = REGCACHE_RBTREE,
-	.reg_defaults_raw = adv7511_register_defaults,
-	.num_reg_defaults_raw = ARRAY_SIZE(adv7511_register_defaults),
-
-	.volatile_reg = adv7511_register_volatile,
-};
-
-/* -----------------------------------------------------------------------------
- * Hardware configuration
- */
-
-static void adv7511_set_colormap(struct adv7511 *adv7511, bool enable,
-				 const uint16_t *coeff,
-				 unsigned int scaling_factor)
-{
-	unsigned int i;
-
-	regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(1),
-			   ADV7511_CSC_UPDATE_MODE, ADV7511_CSC_UPDATE_MODE);
-
-	if (enable) {
-		for (i = 0; i < 12; ++i) {
-			regmap_update_bits(adv7511->regmap,
-					   ADV7511_REG_CSC_UPPER(i),
-					   0x1f, coeff[i] >> 8);
-			regmap_write(adv7511->regmap,
-				     ADV7511_REG_CSC_LOWER(i),
-				     coeff[i] & 0xff);
-		}
-	}
-
-	if (enable)
-		regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(0),
-				   0xe0, 0x80 | (scaling_factor << 5));
-	else
-		regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(0),
-				   0x80, 0x00);
-
-	regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(1),
-			   ADV7511_CSC_UPDATE_MODE, 0);
-}
-
-static int adv7511_packet_enable(struct adv7511 *adv7511, unsigned int packet)
-{
-	if (packet & 0xff)
-		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE0,
-				   packet, 0xff);
-
-	if (packet & 0xff00) {
-		packet >>= 8;
-		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE1,
-				   packet, 0xff);
-	}
-
-	return 0;
-}
-
-static int adv7511_packet_disable(struct adv7511 *adv7511, unsigned int packet)
-{
-	if (packet & 0xff)
-		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE0,
-				   packet, 0x00);
-
-	if (packet & 0xff00) {
-		packet >>= 8;
-		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE1,
-				   packet, 0x00);
-	}
-
-	return 0;
-}
-
-/* Coefficients for adv7511 color space conversion */
-static const uint16_t adv7511_csc_ycbcr_to_rgb[] = {
-	0x0734, 0x04ad, 0x0000, 0x1c1b,
-	0x1ddc, 0x04ad, 0x1f24, 0x0135,
-	0x0000, 0x04ad, 0x087c, 0x1b77,
-};
-
-static void adv7511_set_config_csc(struct adv7511 *adv7511,
-				   struct drm_connector *connector,
-				   bool rgb)
-{
-	struct adv7511_video_config config;
-	bool output_format_422, output_format_ycbcr;
-	unsigned int mode;
-	uint8_t infoframe[17];
-
-	if (adv7511->edid)
-		config.hdmi_mode = drm_detect_hdmi_monitor(adv7511->edid);
-	else
-		config.hdmi_mode = false;
-
-	hdmi_avi_infoframe_init(&config.avi_infoframe);
-
-	config.avi_infoframe.scan_mode = HDMI_SCAN_MODE_UNDERSCAN;
-
-	if (rgb) {
-		config.csc_enable = false;
-		config.avi_infoframe.colorspace = HDMI_COLORSPACE_RGB;
-	} else {
-		config.csc_scaling_factor = ADV7511_CSC_SCALING_4;
-		config.csc_coefficents = adv7511_csc_ycbcr_to_rgb;
-
-		if ((connector->display_info.color_formats &
-		     DRM_COLOR_FORMAT_YCRCB422) &&
-		    config.hdmi_mode) {
-			config.csc_enable = false;
-			config.avi_infoframe.colorspace =
-				HDMI_COLORSPACE_YUV422;
-		} else {
-			config.csc_enable = true;
-			config.avi_infoframe.colorspace = HDMI_COLORSPACE_RGB;
-		}
-	}
-
-	if (config.hdmi_mode) {
-		mode = ADV7511_HDMI_CFG_MODE_HDMI;
-
-		switch (config.avi_infoframe.colorspace) {
-		case HDMI_COLORSPACE_YUV444:
-			output_format_422 = false;
-			output_format_ycbcr = true;
-			break;
-		case HDMI_COLORSPACE_YUV422:
-			output_format_422 = true;
-			output_format_ycbcr = true;
-			break;
-		default:
-			output_format_422 = false;
-			output_format_ycbcr = false;
-			break;
-		}
-	} else {
-		mode = ADV7511_HDMI_CFG_MODE_DVI;
-		output_format_422 = false;
-		output_format_ycbcr = false;
-	}
-
-	adv7511_packet_disable(adv7511, ADV7511_PACKET_ENABLE_AVI_INFOFRAME);
-
-	adv7511_set_colormap(adv7511, config.csc_enable,
-			     config.csc_coefficents,
-			     config.csc_scaling_factor);
-
-	regmap_update_bits(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG1, 0x81,
-			   (output_format_422 << 7) | output_format_ycbcr);
-
-	regmap_update_bits(adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG,
-			   ADV7511_HDMI_CFG_MODE_MASK, mode);
-
-	hdmi_avi_infoframe_pack(&config.avi_infoframe, infoframe,
-				sizeof(infoframe));
-
-	/* The AVI infoframe id is not configurable */
-	regmap_bulk_write(adv7511->regmap, ADV7511_REG_AVI_INFOFRAME_VERSION,
-			  infoframe + 1, sizeof(infoframe) - 1);
-
-	adv7511_packet_enable(adv7511, ADV7511_PACKET_ENABLE_AVI_INFOFRAME);
-}
-
-static void adv7511_set_link_config(struct adv7511 *adv7511,
-				    const struct adv7511_link_config *config)
-{
-	/*
-	 * The input style values documented in the datasheet don't match the
-	 * hardware register field values :-(
-	 */
-	static const unsigned int input_styles[4] = { 0, 2, 1, 3 };
-
-	unsigned int clock_delay;
-	unsigned int color_depth;
-	unsigned int input_id;
-
-	clock_delay = (config->clock_delay + 1200) / 400;
-	color_depth = config->input_color_depth == 8 ? 3
-		    : (config->input_color_depth == 10 ? 1 : 2);
-
-	/* TODO Support input ID 6 */
-	if (config->input_colorspace != HDMI_COLORSPACE_YUV422)
-		input_id = config->input_clock == ADV7511_INPUT_CLOCK_DDR
-			 ? 5 : 0;
-	else if (config->input_clock == ADV7511_INPUT_CLOCK_DDR)
-		input_id = config->embedded_sync ? 8 : 7;
-	else if (config->input_clock == ADV7511_INPUT_CLOCK_2X)
-		input_id = config->embedded_sync ? 4 : 3;
-	else
-		input_id = config->embedded_sync ? 2 : 1;
-
-	regmap_update_bits(adv7511->regmap, ADV7511_REG_I2C_FREQ_ID_CFG, 0xf,
-			   input_id);
-	regmap_update_bits(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG1, 0x7e,
-			   (color_depth << 4) |
-			   (input_styles[config->input_style] << 2));
-	regmap_write(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG2,
-		     config->input_justification << 3);
-	regmap_write(adv7511->regmap, ADV7511_REG_TIMING_GEN_SEQ,
-		     config->sync_pulse << 2);
-
-	regmap_write(adv7511->regmap, 0xba, clock_delay << 5);
-
-	adv7511->embedded_sync = config->embedded_sync;
-	adv7511->hsync_polarity = config->hsync_polarity;
-	adv7511->vsync_polarity = config->vsync_polarity;
-	adv7511->rgb = config->input_colorspace == HDMI_COLORSPACE_RGB;
-}
-
-static void adv7511_power_on(struct adv7511 *adv7511)
-{
-	adv7511->current_edid_segment = -1;
-
-	regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
-			   ADV7511_POWER_POWER_DOWN, 0);
-	if (adv7511->i2c_main->irq) {
-		/*
-		 * Documentation says the INT_ENABLE registers are reset in
-		 * POWER_DOWN mode. My 7511w preserved the bits, however.
-		 * Still, let's be safe and stick to the documentation.
-		 */
-		regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0),
-			     ADV7511_INT0_EDID_READY);
-		regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(1),
-			     ADV7511_INT1_DDC_ERROR);
-	}
-
-	/*
-	 * Per spec it is allowed to pulse the HPD signal to indicate that the
-	 * EDID information has changed. Some monitors do this when they wakeup
-	 * from standby or are enabled. When the HPD goes low the adv7511 is
-	 * reset and the outputs are disabled which might cause the monitor to
-	 * go to standby again. To avoid this we ignore the HPD pin for the
-	 * first few seconds after enabling the output.
-	 */
-	regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
-			   ADV7511_REG_POWER2_HPD_SRC_MASK,
-			   ADV7511_REG_POWER2_HPD_SRC_NONE);
-
-	/*
-	 * Most of the registers are reset during power down or when HPD is low.
-	 */
-	regcache_sync(adv7511->regmap);
-
-	adv7511->powered = true;
-}
-
-static void adv7511_power_off(struct adv7511 *adv7511)
-{
-	/* TODO: setup additional power down modes */
-	regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
-			   ADV7511_POWER_POWER_DOWN,
-			   ADV7511_POWER_POWER_DOWN);
-	regcache_mark_dirty(adv7511->regmap);
-
-	adv7511->powered = false;
-}
-
-/* -----------------------------------------------------------------------------
- * Interrupt and hotplug detection
- */
-
-static bool adv7511_hpd(struct adv7511 *adv7511)
-{
-	unsigned int irq0;
-	int ret;
-
-	ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(0), &irq0);
-	if (ret < 0)
-		return false;
-
-	if (irq0 & ADV7511_INT0_HPD) {
-		regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
-			     ADV7511_INT0_HPD);
-		return true;
-	}
-
-	return false;
-}
-
-static int adv7511_irq_process(struct adv7511 *adv7511)
-{
-	unsigned int irq0, irq1;
-	int ret;
-
-	ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(0), &irq0);
-	if (ret < 0)
-		return ret;
-
-	ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(1), &irq1);
-	if (ret < 0)
-		return ret;
-
-	regmap_write(adv7511->regmap, ADV7511_REG_INT(0), irq0);
-	regmap_write(adv7511->regmap, ADV7511_REG_INT(1), irq1);
-
-	if (irq0 & ADV7511_INT0_HPD && adv7511->encoder)
-		drm_helper_hpd_irq_event(adv7511->encoder->dev);
-
-	if (irq0 & ADV7511_INT0_EDID_READY || irq1 & ADV7511_INT1_DDC_ERROR) {
-		adv7511->edid_read = true;
-
-		if (adv7511->i2c_main->irq)
-			wake_up_all(&adv7511->wq);
-	}
-
-	return 0;
-}
-
-static irqreturn_t adv7511_irq_handler(int irq, void *devid)
-{
-	struct adv7511 *adv7511 = devid;
-	int ret;
-
-	ret = adv7511_irq_process(adv7511);
-	return ret < 0 ? IRQ_NONE : IRQ_HANDLED;
-}
-
-/* -----------------------------------------------------------------------------
- * EDID retrieval
- */
-
-static int adv7511_wait_for_edid(struct adv7511 *adv7511, int timeout)
-{
-	int ret;
-
-	if (adv7511->i2c_main->irq) {
-		ret = wait_event_interruptible_timeout(adv7511->wq,
-				adv7511->edid_read, msecs_to_jiffies(timeout));
-	} else {
-		for (; timeout > 0; timeout -= 25) {
-			ret = adv7511_irq_process(adv7511);
-			if (ret < 0)
-				break;
-
-			if (adv7511->edid_read)
-				break;
-
-			msleep(25);
-		}
-	}
-
-	return adv7511->edid_read ? 0 : -EIO;
-}
-
-static int adv7511_get_edid_block(void *data, u8 *buf, unsigned int block,
-				  size_t len)
-{
-	struct adv7511 *adv7511 = data;
-	struct i2c_msg xfer[2];
-	uint8_t offset;
-	unsigned int i;
-	int ret;
-
-	if (len > 128)
-		return -EINVAL;
-
-	if (adv7511->current_edid_segment != block / 2) {
-		unsigned int status;
-
-		ret = regmap_read(adv7511->regmap, ADV7511_REG_DDC_STATUS,
-				  &status);
-		if (ret < 0)
-			return ret;
-
-		if (status != 2) {
-			adv7511->edid_read = false;
-			regmap_write(adv7511->regmap, ADV7511_REG_EDID_SEGMENT,
-				     block);
-			ret = adv7511_wait_for_edid(adv7511, 200);
-			if (ret < 0)
-				return ret;
-		}
-
-		/* Break this apart, hopefully more I2C controllers will
-		 * support 64 byte transfers than 256 byte transfers
-		 */
-
-		xfer[0].addr = adv7511->i2c_edid->addr;
-		xfer[0].flags = 0;
-		xfer[0].len = 1;
-		xfer[0].buf = &offset;
-		xfer[1].addr = adv7511->i2c_edid->addr;
-		xfer[1].flags = I2C_M_RD;
-		xfer[1].len = 64;
-		xfer[1].buf = adv7511->edid_buf;
-
-		offset = 0;
-
-		for (i = 0; i < 4; ++i) {
-			ret = i2c_transfer(adv7511->i2c_edid->adapter, xfer,
-					   ARRAY_SIZE(xfer));
-			if (ret < 0)
-				return ret;
-			else if (ret != 2)
-				return -EIO;
-
-			xfer[1].buf += 64;
-			offset += 64;
-		}
-
-		adv7511->current_edid_segment = block / 2;
-	}
-
-	if (block % 2 == 0)
-		memcpy(buf, adv7511->edid_buf, len);
-	else
-		memcpy(buf, adv7511->edid_buf + 128, len);
-
-	return 0;
-}
-
-/* -----------------------------------------------------------------------------
- * Encoder operations
- */
-
-static int adv7511_get_modes(struct drm_encoder *encoder,
-			     struct drm_connector *connector)
-{
-	struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
-	struct edid *edid;
-	unsigned int count;
-
-	/* Reading the EDID only works if the device is powered */
-	if (!adv7511->powered) {
-		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
-				   ADV7511_POWER_POWER_DOWN, 0);
-		if (adv7511->i2c_main->irq) {
-			regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0),
-				     ADV7511_INT0_EDID_READY);
-			regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(1),
-				     ADV7511_INT1_DDC_ERROR);
-		}
-		adv7511->current_edid_segment = -1;
-	}
-
-	edid = drm_do_get_edid(connector, adv7511_get_edid_block, adv7511);
-
-	if (!adv7511->powered)
-		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
-				   ADV7511_POWER_POWER_DOWN,
-				   ADV7511_POWER_POWER_DOWN);
-
-	kfree(adv7511->edid);
-	adv7511->edid = edid;
-	if (!edid)
-		return 0;
-
-	drm_mode_connector_update_edid_property(connector, edid);
-	count = drm_add_edid_modes(connector, edid);
-
-	adv7511_set_config_csc(adv7511, connector, adv7511->rgb);
-
-	return count;
-}
-
-static void adv7511_encoder_dpms(struct drm_encoder *encoder, int mode)
-{
-	struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
-
-	if (mode == DRM_MODE_DPMS_ON)
-		adv7511_power_on(adv7511);
-	else
-		adv7511_power_off(adv7511);
-}
-
-static enum drm_connector_status
-adv7511_encoder_detect(struct drm_encoder *encoder,
-		       struct drm_connector *connector)
-{
-	struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
-	enum drm_connector_status status;
-	unsigned int val;
-	bool hpd;
-	int ret;
-
-	ret = regmap_read(adv7511->regmap, ADV7511_REG_STATUS, &val);
-	if (ret < 0)
-		return connector_status_disconnected;
-
-	if (val & ADV7511_STATUS_HPD)
-		status = connector_status_connected;
-	else
-		status = connector_status_disconnected;
-
-	hpd = adv7511_hpd(adv7511);
-
-	/* The chip resets itself when the cable is disconnected, so in case
-	 * there is a pending HPD interrupt and the cable is connected there was
-	 * at least one transition from disconnected to connected and the chip
-	 * has to be reinitialized. */
-	if (status == connector_status_connected && hpd && adv7511->powered) {
-		regcache_mark_dirty(adv7511->regmap);
-		adv7511_power_on(adv7511);
-		adv7511_get_modes(encoder, connector);
-		if (adv7511->status == connector_status_connected)
-			status = connector_status_disconnected;
-	} else {
-		/* Renable HPD sensing */
-		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
-				   ADV7511_REG_POWER2_HPD_SRC_MASK,
-				   ADV7511_REG_POWER2_HPD_SRC_BOTH);
-	}
-
-	adv7511->status = status;
-	return status;
-}
-
-static int adv7511_encoder_mode_valid(struct drm_encoder *encoder,
-				      struct drm_display_mode *mode)
-{
-	if (mode->clock > 165000)
-		return MODE_CLOCK_HIGH;
-
-	return MODE_OK;
-}
-
-static void adv7511_encoder_mode_set(struct drm_encoder *encoder,
-				     struct drm_display_mode *mode,
-				     struct drm_display_mode *adj_mode)
-{
-	struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
-	unsigned int low_refresh_rate;
-	unsigned int hsync_polarity = 0;
-	unsigned int vsync_polarity = 0;
-
-	if (adv7511->embedded_sync) {
-		unsigned int hsync_offset, hsync_len;
-		unsigned int vsync_offset, vsync_len;
-
-		hsync_offset = adj_mode->crtc_hsync_start -
-			       adj_mode->crtc_hdisplay;
-		vsync_offset = adj_mode->crtc_vsync_start -
-			       adj_mode->crtc_vdisplay;
-		hsync_len = adj_mode->crtc_hsync_end -
-			    adj_mode->crtc_hsync_start;
-		vsync_len = adj_mode->crtc_vsync_end -
-			    adj_mode->crtc_vsync_start;
-
-		/* The hardware vsync generator has a off-by-one bug */
-		vsync_offset += 1;
-
-		regmap_write(adv7511->regmap, ADV7511_REG_HSYNC_PLACEMENT_MSB,
-			     ((hsync_offset >> 10) & 0x7) << 5);
-		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(0),
-			     (hsync_offset >> 2) & 0xff);
-		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(1),
-			     ((hsync_offset & 0x3) << 6) |
-			     ((hsync_len >> 4) & 0x3f));
-		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(2),
-			     ((hsync_len & 0xf) << 4) |
-			     ((vsync_offset >> 6) & 0xf));
-		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(3),
-			     ((vsync_offset & 0x3f) << 2) |
-			     ((vsync_len >> 8) & 0x3));
-		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(4),
-			     vsync_len & 0xff);
-
-		hsync_polarity = !(adj_mode->flags & DRM_MODE_FLAG_PHSYNC);
-		vsync_polarity = !(adj_mode->flags & DRM_MODE_FLAG_PVSYNC);
-	} else {
-		enum adv7511_sync_polarity mode_hsync_polarity;
-		enum adv7511_sync_polarity mode_vsync_polarity;
-
-		/**
-		 * If the input signal is always low or always high we want to
-		 * invert or let it passthrough depending on the polarity of the
-		 * current mode.
-		 **/
-		if (adj_mode->flags & DRM_MODE_FLAG_NHSYNC)
-			mode_hsync_polarity = ADV7511_SYNC_POLARITY_LOW;
-		else
-			mode_hsync_polarity = ADV7511_SYNC_POLARITY_HIGH;
-
-		if (adj_mode->flags & DRM_MODE_FLAG_NVSYNC)
-			mode_vsync_polarity = ADV7511_SYNC_POLARITY_LOW;
-		else
-			mode_vsync_polarity = ADV7511_SYNC_POLARITY_HIGH;
-
-		if (adv7511->hsync_polarity != mode_hsync_polarity &&
-		    adv7511->hsync_polarity !=
-		    ADV7511_SYNC_POLARITY_PASSTHROUGH)
-			hsync_polarity = 1;
-
-		if (adv7511->vsync_polarity != mode_vsync_polarity &&
-		    adv7511->vsync_polarity !=
-		    ADV7511_SYNC_POLARITY_PASSTHROUGH)
-			vsync_polarity = 1;
-	}
-
-	if (mode->vrefresh <= 24000)
-		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_24HZ;
-	else if (mode->vrefresh <= 25000)
-		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_25HZ;
-	else if (mode->vrefresh <= 30000)
-		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_30HZ;
-	else
-		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_NONE;
-
-	regmap_update_bits(adv7511->regmap, 0xfb,
-		0x6, low_refresh_rate << 1);
-	regmap_update_bits(adv7511->regmap, 0x17,
-		0x60, (vsync_polarity << 6) | (hsync_polarity << 5));
-
-	/*
-	 * TODO Test first order 4:2:2 to 4:4:4 up conversion method, which is
-	 * supposed to give better results.
-	 */
-
-	adv7511->f_tmds = mode->clock;
-}
-
-static const struct drm_encoder_slave_funcs adv7511_encoder_funcs = {
-	.dpms = adv7511_encoder_dpms,
-	.mode_valid = adv7511_encoder_mode_valid,
-	.mode_set = adv7511_encoder_mode_set,
-	.detect = adv7511_encoder_detect,
-	.get_modes = adv7511_get_modes,
-};
-
-/* -----------------------------------------------------------------------------
- * Probe & remove
- */
-
-static int adv7511_parse_dt(struct device_node *np,
-			    struct adv7511_link_config *config)
-{
-	const char *str;
-	int ret;
-
-	memset(config, 0, sizeof(*config));
-
-	of_property_read_u32(np, "adi,input-depth", &config->input_color_depth);
-	if (config->input_color_depth != 8 && config->input_color_depth != 10 &&
-	    config->input_color_depth != 12)
-		return -EINVAL;
-
-	ret = of_property_read_string(np, "adi,input-colorspace", &str);
-	if (ret < 0)
-		return ret;
-
-	if (!strcmp(str, "rgb"))
-		config->input_colorspace = HDMI_COLORSPACE_RGB;
-	else if (!strcmp(str, "yuv422"))
-		config->input_colorspace = HDMI_COLORSPACE_YUV422;
-	else if (!strcmp(str, "yuv444"))
-		config->input_colorspace = HDMI_COLORSPACE_YUV444;
-	else
-		return -EINVAL;
-
-	ret = of_property_read_string(np, "adi,input-clock", &str);
-	if (ret < 0)
-		return ret;
-
-	if (!strcmp(str, "1x"))
-		config->input_clock = ADV7511_INPUT_CLOCK_1X;
-	else if (!strcmp(str, "2x"))
-		config->input_clock = ADV7511_INPUT_CLOCK_2X;
-	else if (!strcmp(str, "ddr"))
-		config->input_clock = ADV7511_INPUT_CLOCK_DDR;
-	else
-		return -EINVAL;
-
-	if (config->input_colorspace == HDMI_COLORSPACE_YUV422 ||
-	    config->input_clock != ADV7511_INPUT_CLOCK_1X) {
-		ret = of_property_read_u32(np, "adi,input-style",
-					   &config->input_style);
-		if (ret)
-			return ret;
-
-		if (config->input_style < 1 || config->input_style > 3)
-			return -EINVAL;
-
-		ret = of_property_read_string(np, "adi,input-justification",
-					      &str);
-		if (ret < 0)
-			return ret;
-
-		if (!strcmp(str, "left"))
-			config->input_justification =
-				ADV7511_INPUT_JUSTIFICATION_LEFT;
-		else if (!strcmp(str, "evenly"))
-			config->input_justification =
-				ADV7511_INPUT_JUSTIFICATION_EVENLY;
-		else if (!strcmp(str, "right"))
-			config->input_justification =
-				ADV7511_INPUT_JUSTIFICATION_RIGHT;
-		else
-			return -EINVAL;
-
-	} else {
-		config->input_style = 1;
-		config->input_justification = ADV7511_INPUT_JUSTIFICATION_LEFT;
-	}
-
-	of_property_read_u32(np, "adi,clock-delay", &config->clock_delay);
-	if (config->clock_delay < -1200 || config->clock_delay > 1600)
-		return -EINVAL;
-
-	config->embedded_sync = of_property_read_bool(np, "adi,embedded-sync");
-
-	/* Hardcode the sync pulse configurations for now. */
-	config->sync_pulse = ADV7511_INPUT_SYNC_PULSE_NONE;
-	config->vsync_polarity = ADV7511_SYNC_POLARITY_PASSTHROUGH;
-	config->hsync_polarity = ADV7511_SYNC_POLARITY_PASSTHROUGH;
-
-	return 0;
-}
-
-static const int edid_i2c_addr = 0x7e;
-static const int packet_i2c_addr = 0x70;
-static const int cec_i2c_addr = 0x78;
-
-static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
-{
-	struct adv7511_link_config link_config;
-	struct adv7511 *adv7511;
-	struct device *dev = &i2c->dev;
-	unsigned int val;
-	int ret;
-
-	if (!dev->of_node)
-		return -EINVAL;
-
-	adv7511 = devm_kzalloc(dev, sizeof(*adv7511), GFP_KERNEL);
-	if (!adv7511)
-		return -ENOMEM;
-
-	adv7511->powered = false;
-	adv7511->status = connector_status_disconnected;
-
-	ret = adv7511_parse_dt(dev->of_node, &link_config);
-	if (ret)
-		return ret;
-
-	/*
-	 * The power down GPIO is optional. If present, toggle it from active to
-	 * inactive to wake up the encoder.
-	 */
-	adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH);
-	if (IS_ERR(adv7511->gpio_pd))
-		return PTR_ERR(adv7511->gpio_pd);
-
-	if (adv7511->gpio_pd) {
-		mdelay(5);
-		gpiod_set_value_cansleep(adv7511->gpio_pd, 0);
-	}
-
-	adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config);
-	if (IS_ERR(adv7511->regmap))
-		return PTR_ERR(adv7511->regmap);
-
-	ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val);
-	if (ret)
-		return ret;
-	dev_dbg(dev, "Rev. %d\n", val);
-
-	ret = regmap_register_patch(adv7511->regmap, adv7511_fixed_registers,
-				    ARRAY_SIZE(adv7511_fixed_registers));
-	if (ret)
-		return ret;
-
-	regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, edid_i2c_addr);
-	regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
-		     packet_i2c_addr);
-	regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR, cec_i2c_addr);
-	adv7511_packet_disable(adv7511, 0xffff);
-
-	adv7511->i2c_main = i2c;
-	adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
-	if (!adv7511->i2c_edid)
-		return -ENOMEM;
-
-	if (i2c->irq) {
-		init_waitqueue_head(&adv7511->wq);
-
-		ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
-						adv7511_irq_handler,
-						IRQF_ONESHOT, dev_name(dev),
-						adv7511);
-		if (ret)
-			goto err_i2c_unregister_device;
-	}
-
-	/* CEC is unused for now */
-	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
-		     ADV7511_CEC_CTRL_POWER_DOWN);
-
-	adv7511_power_off(adv7511);
-
-	i2c_set_clientdata(i2c, adv7511);
-
-	adv7511_set_link_config(adv7511, &link_config);
-
-	return 0;
-
-err_i2c_unregister_device:
-	i2c_unregister_device(adv7511->i2c_edid);
-
-	return ret;
-}
-
-static int adv7511_remove(struct i2c_client *i2c)
-{
-	struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
-
-	i2c_unregister_device(adv7511->i2c_edid);
-
-	kfree(adv7511->edid);
-
-	return 0;
-}
-
-static int adv7511_encoder_init(struct i2c_client *i2c, struct drm_device *dev,
-				struct drm_encoder_slave *encoder)
-{
-
-	struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
-
-	encoder->slave_priv = adv7511;
-	encoder->slave_funcs = &adv7511_encoder_funcs;
-
-	adv7511->encoder = &encoder->base;
-
-	return 0;
-}
-
-static const struct i2c_device_id adv7511_i2c_ids[] = {
-	{ "adv7511", 0 },
-	{ "adv7511w", 0 },
-	{ "adv7513", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, adv7511_i2c_ids);
-
-static const struct of_device_id adv7511_of_ids[] = {
-	{ .compatible = "adi,adv7511", },
-	{ .compatible = "adi,adv7511w", },
-	{ .compatible = "adi,adv7513", },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, adv7511_of_ids);
-
-static struct drm_i2c_encoder_driver adv7511_driver = {
-	.i2c_driver = {
-		.driver = {
-			.name = "adv7511",
-			.of_match_table = adv7511_of_ids,
-		},
-		.id_table = adv7511_i2c_ids,
-		.probe = adv7511_probe,
-		.remove = adv7511_remove,
-	},
-
-	.encoder_init = adv7511_encoder_init,
-};
-
-static int __init adv7511_init(void)
-{
-	return drm_i2c_encoder_register(THIS_MODULE, &adv7511_driver);
-}
-module_init(adv7511_init);
-
-static void __exit adv7511_exit(void)
-{
-	drm_i2c_encoder_unregister(&adv7511_driver);
-}
-module_exit(adv7511_exit);
-
-MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
-MODULE_DESCRIPTION("ADV7511 HDMI transmitter driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/i2c/adv7511.h b/drivers/gpu/drm/i2c/adv7511.h
index 38515b3..fccb86e 100644
--- a/drivers/gpu/drm/i2c/adv7511.h
+++ b/drivers/gpu/drm/i2c/adv7511.h
@@ -10,6 +10,8 @@ 
 #define __DRM_I2C_ADV7511_H__
 
 #include <linux/hdmi.h>
+#include <linux/gpio/consumer.h>
+#include <drm/drmP.h>
 
 #define ADV7511_REG_CHIP_REVISION		0x00
 #define ADV7511_REG_N0				0x01
@@ -286,4 +288,43 @@  struct adv7511_video_config {
 	struct hdmi_avi_infoframe avi_infoframe;
 };
 
+struct adv7511 {
+	struct i2c_client *i2c_main;
+	struct i2c_client *i2c_edid;
+
+	struct regmap *regmap;
+	struct regmap *packet_memory_regmap;
+	enum drm_connector_status status;
+	bool powered;
+
+	unsigned int f_tmds;
+	unsigned int f_audio;
+
+	unsigned int audio_source;
+
+	unsigned int current_edid_segment;
+	uint8_t edid_buf[256];
+	bool edid_read;
+
+	wait_queue_head_t wq;
+	struct drm_encoder *encoder;
+
+	bool embedded_sync;
+	enum adv7511_sync_polarity vsync_polarity;
+	enum adv7511_sync_polarity hsync_polarity;
+	bool rgb;
+
+	struct edid *edid;
+
+	struct gpio_desc *gpio_pd;
+};
+
+int adv7511_packet_enable(struct adv7511 *adv7511, unsigned int packet);
+int adv7511_packet_disable(struct adv7511 *adv7511, unsigned int packet);
+
+#ifdef CONFIG_DRM_I2C_ADV7511_AUDIO
+int adv7511_audio_init(struct device *dev);
+void adv7511_audio_exit(struct device *dev);
+#endif
+
 #endif /* __DRM_I2C_ADV7511_H__ */
diff --git a/drivers/gpu/drm/i2c/adv7511_audio.c b/drivers/gpu/drm/i2c/adv7511_audio.c
new file mode 100644
index 0000000..5562ed5
--- /dev/null
+++ b/drivers/gpu/drm/i2c/adv7511_audio.c
@@ -0,0 +1,310 @@ 
+/*
+ * Analog Devices ADV7511 HDMI transmitter driver
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "adv7511.h"
+
+static const struct snd_soc_dapm_widget adv7511_dapm_widgets[] = {
+	SND_SOC_DAPM_OUTPUT("TMDS"),
+	SND_SOC_DAPM_AIF_IN("AIFIN", "Playback", 0, SND_SOC_NOPM, 0, 0),
+};
+
+static const struct snd_soc_dapm_route adv7511_routes[] = {
+	{ "TMDS", NULL, "AIFIN" },
+};
+
+static void adv7511_calc_cts_n(unsigned int f_tmds, unsigned int fs,
+			       unsigned int *cts, unsigned int *n)
+{
+	switch (fs) {
+	case 32000:
+		*n = 4096;
+		break;
+	case 44100:
+		*n = 6272;
+		break;
+	case 48000:
+		*n = 6144;
+		break;
+	}
+
+	*cts = ((f_tmds * *n) / (128 * fs)) * 1000;
+}
+
+static int adv7511_update_cts_n(struct adv7511 *adv7511)
+{
+	unsigned int cts = 0;
+	unsigned int n = 0;
+
+	adv7511_calc_cts_n(adv7511->f_tmds, adv7511->f_audio, &cts, &n);
+
+	regmap_write(adv7511->regmap, ADV7511_REG_N0, (n >> 16) & 0xf);
+	regmap_write(adv7511->regmap, ADV7511_REG_N1, (n >> 8) & 0xff);
+	regmap_write(adv7511->regmap, ADV7511_REG_N2, n & 0xff);
+
+	regmap_write(adv7511->regmap, ADV7511_REG_CTS_MANUAL0,
+		     (cts >> 16) & 0xf);
+	regmap_write(adv7511->regmap, ADV7511_REG_CTS_MANUAL1,
+		     (cts >> 8) & 0xff);
+	regmap_write(adv7511->regmap, ADV7511_REG_CTS_MANUAL2,
+		     cts & 0xff);
+
+	return 0;
+}
+
+static int adv7511_hw_params(struct snd_pcm_substream *substream,
+			     struct snd_pcm_hw_params *params,
+			     struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_codec *codec = rtd->codec;
+	struct adv7511 *adv7511 = snd_soc_codec_get_drvdata(codec);
+	unsigned int rate;
+	unsigned int len;
+
+	switch (params_rate(params)) {
+	case 32000:
+		rate = ADV7511_SAMPLE_FREQ_32000;
+		break;
+	case 44100:
+		rate = ADV7511_SAMPLE_FREQ_44100;
+		break;
+	case 48000:
+		rate = ADV7511_SAMPLE_FREQ_48000;
+		break;
+	case 88200:
+		rate = ADV7511_SAMPLE_FREQ_88200;
+		break;
+	case 96000:
+		rate = ADV7511_SAMPLE_FREQ_96000;
+		break;
+	case 176400:
+		rate = ADV7511_SAMPLE_FREQ_176400;
+		break;
+	case 192000:
+		rate = ADV7511_SAMPLE_FREQ_192000;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		len = ADV7511_I2S_SAMPLE_LEN_16;
+		break;
+	case SNDRV_PCM_FORMAT_S18_3LE:
+		len = ADV7511_I2S_SAMPLE_LEN_18;
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+		len = ADV7511_I2S_SAMPLE_LEN_20;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		len = ADV7511_I2S_SAMPLE_LEN_24;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	adv7511->f_audio = params_rate(params);
+
+	adv7511_update_cts_n(adv7511);
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_CFG3,
+			   ADV7511_AUDIO_CFG3_LEN_MASK, len);
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_I2C_FREQ_ID_CFG,
+			   ADV7511_I2C_FREQ_ID_CFG_RATE_MASK, rate << 4);
+
+	return 0;
+}
+
+static int adv7511_set_dai_fmt(struct snd_soc_dai *codec_dai,
+			       unsigned int fmt)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	struct adv7511 *adv7511 = snd_soc_codec_get_drvdata(codec);
+	unsigned int audio_source, i2s_format = 0;
+	unsigned int invert_clock;
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		audio_source = ADV7511_AUDIO_SOURCE_I2S;
+		i2s_format = ADV7511_I2S_FORMAT_I2S;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		audio_source = ADV7511_AUDIO_SOURCE_I2S;
+		i2s_format = ADV7511_I2S_FORMAT_RIGHT_J;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		audio_source = ADV7511_AUDIO_SOURCE_I2S;
+		i2s_format = ADV7511_I2S_FORMAT_LEFT_J;
+		break;
+	case SND_SOC_DAIFMT_SPDIF:
+		audio_source = ADV7511_AUDIO_SOURCE_SPDIF;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		invert_clock = 0;
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		invert_clock = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_SOURCE, 0x70,
+			   audio_source << 4);
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_CONFIG, BIT(6),
+			   invert_clock << 6);
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_I2S_CONFIG, 0x03,
+			   i2s_format);
+
+	adv7511->audio_source = audio_source;
+
+	return 0;
+}
+
+static int adv7511_set_bias_level(struct snd_soc_codec *codec,
+				  enum snd_soc_bias_level level)
+{
+	struct adv7511 *adv7511 = snd_soc_codec_get_drvdata(codec);
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		switch (adv7511->audio_source) {
+		case ADV7511_AUDIO_SOURCE_I2S:
+			break;
+		case ADV7511_AUDIO_SOURCE_SPDIF:
+			regmap_update_bits(adv7511->regmap,
+					   ADV7511_REG_AUDIO_CONFIG, BIT(7),
+					   BIT(7));
+			break;
+		}
+		break;
+	case SND_SOC_BIAS_PREPARE:
+		if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_STANDBY) {
+			adv7511_packet_enable(adv7511,
+					ADV7511_PACKET_ENABLE_AUDIO_SAMPLE);
+			adv7511_packet_enable(adv7511,
+					ADV7511_PACKET_ENABLE_AUDIO_INFOFRAME);
+			adv7511_packet_enable(adv7511,
+					ADV7511_PACKET_ENABLE_N_CTS);
+		} else {
+			adv7511_packet_disable(adv7511,
+					ADV7511_PACKET_ENABLE_AUDIO_SAMPLE);
+			adv7511_packet_disable(adv7511,
+					ADV7511_PACKET_ENABLE_AUDIO_INFOFRAME);
+			adv7511_packet_disable(adv7511,
+					ADV7511_PACKET_ENABLE_N_CTS);
+		}
+		break;
+	case SND_SOC_BIAS_STANDBY:
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_CONFIG,
+				   BIT(7), 0);
+		break;
+	case SND_SOC_BIAS_OFF:
+		break;
+	}
+	return 0;
+}
+
+#define ADV7511_RATES (SNDRV_PCM_RATE_32000 |\
+		SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |\
+		SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 |\
+		SNDRV_PCM_RATE_176400 | SNDRV_PCM_RATE_192000)
+
+#define ADV7511_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S18_3LE |\
+		SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE)
+
+static const struct snd_soc_dai_ops adv7511_dai_ops = {
+	.hw_params	= adv7511_hw_params,
+	/*.set_sysclk	= adv7511_set_dai_sysclk,*/
+	.set_fmt	= adv7511_set_dai_fmt,
+};
+
+static struct snd_soc_dai_driver adv7511_dai = {
+	.name = "adv7511",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = ADV7511_RATES,
+		.formats = ADV7511_FORMATS,
+	},
+	.ops = &adv7511_dai_ops,
+};
+
+static int adv7511_suspend(struct snd_soc_codec *codec)
+{
+	return adv7511_set_bias_level(codec, SND_SOC_BIAS_OFF);
+}
+
+static int adv7511_resume(struct snd_soc_codec *codec)
+{
+	return adv7511_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+}
+
+static int adv7511_probe(struct snd_soc_codec *codec)
+{
+	return adv7511_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+}
+
+static int adv7511_remove(struct snd_soc_codec *codec)
+{
+	adv7511_set_bias_level(codec, SND_SOC_BIAS_OFF);
+	return 0;
+}
+
+static struct snd_soc_codec_driver adv7511_codec_driver = {
+	.probe		    = adv7511_probe,
+	.remove		    = adv7511_remove,
+	.suspend	    = adv7511_suspend,
+	.resume		    = adv7511_resume,
+	.set_bias_level	    = adv7511_set_bias_level,
+
+	.dapm_widgets	    = adv7511_dapm_widgets,
+	.num_dapm_widgets   = ARRAY_SIZE(adv7511_dapm_widgets),
+	.dapm_routes	    = adv7511_routes,
+	.num_dapm_routes    = ARRAY_SIZE(adv7511_routes),
+};
+
+int adv7511_audio_init(struct device *dev)
+{
+	return snd_soc_register_codec(dev, &adv7511_codec_driver,
+			&adv7511_dai, 1);
+}
+
+void adv7511_audio_exit(struct device *dev)
+{
+	snd_soc_unregister_codec(dev);
+}
diff --git a/drivers/gpu/drm/i2c/adv7511_core.c b/drivers/gpu/drm/i2c/adv7511_core.c
new file mode 100644
index 0000000..d54256a
--- /dev/null
+++ b/drivers/gpu/drm/i2c/adv7511_core.c
@@ -0,0 +1,1005 @@ 
+/*
+ * Analog Devices ADV7511 HDMI transmitter driver
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_encoder_slave.h>
+
+#include "adv7511.h"
+
+static struct adv7511 *encoder_to_adv7511(struct drm_encoder *encoder)
+{
+	return to_encoder_slave(encoder)->slave_priv;
+}
+
+/* ADI recommended values for proper operation. */
+static const struct reg_sequence adv7511_fixed_registers[] = {
+	{ 0x98, 0x03 },
+	{ 0x9a, 0xe0 },
+	{ 0x9c, 0x30 },
+	{ 0x9d, 0x61 },
+	{ 0xa2, 0xa4 },
+	{ 0xa3, 0xa4 },
+	{ 0xe0, 0xd0 },
+	{ 0xf9, 0x00 },
+	{ 0x55, 0x02 },
+};
+
+/* -----------------------------------------------------------------------------
+ * Register access
+ */
+
+static const uint8_t adv7511_register_defaults[] = {
+	0x12, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 00 */
+	0x00, 0x00, 0x01, 0x0e, 0xbc, 0x18, 0x01, 0x13,
+	0x25, 0x37, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 10 */
+	0x46, 0x62, 0x04, 0xa8, 0x00, 0x00, 0x1c, 0x84,
+	0x1c, 0xbf, 0x04, 0xa8, 0x1e, 0x70, 0x02, 0x1e, /* 20 */
+	0x00, 0x00, 0x04, 0xa8, 0x08, 0x12, 0x1b, 0xac,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 30 */
+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0xb0,
+	0x00, 0x50, 0x90, 0x7e, 0x79, 0x70, 0x00, 0x00, /* 40 */
+	0x00, 0xa8, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x02, 0x0d, 0x00, 0x00, 0x00, 0x00, /* 50 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 60 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x01, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 70 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 80 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, /* 90 */
+	0x0b, 0x02, 0x00, 0x18, 0x5a, 0x60, 0x00, 0x00,
+	0x00, 0x00, 0x80, 0x80, 0x08, 0x04, 0x00, 0x00, /* a0 */
+	0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x14,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b0 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c0 */
+	0x00, 0x03, 0x00, 0x00, 0x02, 0x00, 0x01, 0x04,
+	0x30, 0xff, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, /* d0 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x01,
+	0x80, 0x75, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, /* e0 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x75, 0x11, 0x00, /* f0 */
+	0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+static bool adv7511_register_volatile(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case ADV7511_REG_CHIP_REVISION:
+	case ADV7511_REG_SPDIF_FREQ:
+	case ADV7511_REG_CTS_AUTOMATIC1:
+	case ADV7511_REG_CTS_AUTOMATIC2:
+	case ADV7511_REG_VIC_DETECTED:
+	case ADV7511_REG_VIC_SEND:
+	case ADV7511_REG_AUX_VIC_DETECTED:
+	case ADV7511_REG_STATUS:
+	case ADV7511_REG_GC(1):
+	case ADV7511_REG_INT(0):
+	case ADV7511_REG_INT(1):
+	case ADV7511_REG_PLL_STATUS:
+	case ADV7511_REG_AN(0):
+	case ADV7511_REG_AN(1):
+	case ADV7511_REG_AN(2):
+	case ADV7511_REG_AN(3):
+	case ADV7511_REG_AN(4):
+	case ADV7511_REG_AN(5):
+	case ADV7511_REG_AN(6):
+	case ADV7511_REG_AN(7):
+	case ADV7511_REG_HDCP_STATUS:
+	case ADV7511_REG_BCAPS:
+	case ADV7511_REG_BKSV(0):
+	case ADV7511_REG_BKSV(1):
+	case ADV7511_REG_BKSV(2):
+	case ADV7511_REG_BKSV(3):
+	case ADV7511_REG_BKSV(4):
+	case ADV7511_REG_DDC_STATUS:
+	case ADV7511_REG_EDID_READ_CTRL:
+	case ADV7511_REG_BSTATUS(0):
+	case ADV7511_REG_BSTATUS(1):
+	case ADV7511_REG_CHIP_ID_HIGH:
+	case ADV7511_REG_CHIP_ID_LOW:
+		return true;
+	}
+
+	return false;
+}
+
+static const struct regmap_config adv7511_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = 0xff,
+	.cache_type = REGCACHE_RBTREE,
+	.reg_defaults_raw = adv7511_register_defaults,
+	.num_reg_defaults_raw = ARRAY_SIZE(adv7511_register_defaults),
+
+	.volatile_reg = adv7511_register_volatile,
+};
+
+/* -----------------------------------------------------------------------------
+ * Hardware configuration
+ */
+
+static void adv7511_set_colormap(struct adv7511 *adv7511, bool enable,
+				 const uint16_t *coeff,
+				 unsigned int scaling_factor)
+{
+	unsigned int i;
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(1),
+			   ADV7511_CSC_UPDATE_MODE, ADV7511_CSC_UPDATE_MODE);
+
+	if (enable) {
+		for (i = 0; i < 12; ++i) {
+			regmap_update_bits(adv7511->regmap,
+					   ADV7511_REG_CSC_UPPER(i),
+					   0x1f, coeff[i] >> 8);
+			regmap_write(adv7511->regmap,
+				     ADV7511_REG_CSC_LOWER(i),
+				     coeff[i] & 0xff);
+		}
+	}
+
+	if (enable)
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(0),
+				   0xe0, 0x80 | (scaling_factor << 5));
+	else
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(0),
+				   0x80, 0x00);
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(1),
+			   ADV7511_CSC_UPDATE_MODE, 0);
+}
+
+int adv7511_packet_enable(struct adv7511 *adv7511, unsigned int packet)
+{
+	if (packet & 0xff)
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE0,
+				   packet, 0xff);
+
+	if (packet & 0xff00) {
+		packet >>= 8;
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE1,
+				   packet, 0xff);
+	}
+
+	return 0;
+}
+
+int adv7511_packet_disable(struct adv7511 *adv7511, unsigned int packet)
+{
+	if (packet & 0xff)
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE0,
+				   packet, 0x00);
+
+	if (packet & 0xff00) {
+		packet >>= 8;
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE1,
+				   packet, 0x00);
+	}
+
+	return 0;
+}
+
+/* Coefficients for adv7511 color space conversion */
+static const uint16_t adv7511_csc_ycbcr_to_rgb[] = {
+	0x0734, 0x04ad, 0x0000, 0x1c1b,
+	0x1ddc, 0x04ad, 0x1f24, 0x0135,
+	0x0000, 0x04ad, 0x087c, 0x1b77,
+};
+
+static void adv7511_set_config_csc(struct adv7511 *adv7511,
+				   struct drm_connector *connector,
+				   bool rgb)
+{
+	struct adv7511_video_config config;
+	bool output_format_422, output_format_ycbcr;
+	unsigned int mode;
+	uint8_t infoframe[17];
+
+	if (adv7511->edid)
+		config.hdmi_mode = drm_detect_hdmi_monitor(adv7511->edid);
+	else
+		config.hdmi_mode = false;
+
+	hdmi_avi_infoframe_init(&config.avi_infoframe);
+
+	config.avi_infoframe.scan_mode = HDMI_SCAN_MODE_UNDERSCAN;
+
+	if (rgb) {
+		config.csc_enable = false;
+		config.avi_infoframe.colorspace = HDMI_COLORSPACE_RGB;
+	} else {
+		config.csc_scaling_factor = ADV7511_CSC_SCALING_4;
+		config.csc_coefficents = adv7511_csc_ycbcr_to_rgb;
+
+		if ((connector->display_info.color_formats &
+		     DRM_COLOR_FORMAT_YCRCB422) &&
+		    config.hdmi_mode) {
+			config.csc_enable = false;
+			config.avi_infoframe.colorspace =
+				HDMI_COLORSPACE_YUV422;
+		} else {
+			config.csc_enable = true;
+			config.avi_infoframe.colorspace = HDMI_COLORSPACE_RGB;
+		}
+	}
+
+	if (config.hdmi_mode) {
+		mode = ADV7511_HDMI_CFG_MODE_HDMI;
+
+		switch (config.avi_infoframe.colorspace) {
+		case HDMI_COLORSPACE_YUV444:
+			output_format_422 = false;
+			output_format_ycbcr = true;
+			break;
+		case HDMI_COLORSPACE_YUV422:
+			output_format_422 = true;
+			output_format_ycbcr = true;
+			break;
+		default:
+			output_format_422 = false;
+			output_format_ycbcr = false;
+			break;
+		}
+	} else {
+		mode = ADV7511_HDMI_CFG_MODE_DVI;
+		output_format_422 = false;
+		output_format_ycbcr = false;
+	}
+
+	adv7511_packet_disable(adv7511, ADV7511_PACKET_ENABLE_AVI_INFOFRAME);
+
+	adv7511_set_colormap(adv7511, config.csc_enable,
+			     config.csc_coefficents,
+			     config.csc_scaling_factor);
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG1, 0x81,
+			   (output_format_422 << 7) | output_format_ycbcr);
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG,
+			   ADV7511_HDMI_CFG_MODE_MASK, mode);
+
+	hdmi_avi_infoframe_pack(&config.avi_infoframe, infoframe,
+				sizeof(infoframe));
+
+	/* The AVI infoframe id is not configurable */
+	regmap_bulk_write(adv7511->regmap, ADV7511_REG_AVI_INFOFRAME_VERSION,
+			  infoframe + 1, sizeof(infoframe) - 1);
+
+	adv7511_packet_enable(adv7511, ADV7511_PACKET_ENABLE_AVI_INFOFRAME);
+}
+
+static void adv7511_set_link_config(struct adv7511 *adv7511,
+				    const struct adv7511_link_config *config)
+{
+	/*
+	 * The input style values documented in the datasheet don't match the
+	 * hardware register field values :-(
+	 */
+	static const unsigned int input_styles[4] = { 0, 2, 1, 3 };
+
+	unsigned int clock_delay;
+	unsigned int color_depth;
+	unsigned int input_id;
+
+	clock_delay = (config->clock_delay + 1200) / 400;
+	color_depth = config->input_color_depth == 8 ? 3
+		    : (config->input_color_depth == 10 ? 1 : 2);
+
+	/* TODO Support input ID 6 */
+	if (config->input_colorspace != HDMI_COLORSPACE_YUV422)
+		input_id = config->input_clock == ADV7511_INPUT_CLOCK_DDR
+			 ? 5 : 0;
+	else if (config->input_clock == ADV7511_INPUT_CLOCK_DDR)
+		input_id = config->embedded_sync ? 8 : 7;
+	else if (config->input_clock == ADV7511_INPUT_CLOCK_2X)
+		input_id = config->embedded_sync ? 4 : 3;
+	else
+		input_id = config->embedded_sync ? 2 : 1;
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_I2C_FREQ_ID_CFG, 0xf,
+			   input_id);
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG1, 0x7e,
+			   (color_depth << 4) |
+			   (input_styles[config->input_style] << 2));
+	regmap_write(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG2,
+		     config->input_justification << 3);
+	regmap_write(adv7511->regmap, ADV7511_REG_TIMING_GEN_SEQ,
+		     config->sync_pulse << 2);
+
+	regmap_write(adv7511->regmap, 0xba, clock_delay << 5);
+
+	adv7511->embedded_sync = config->embedded_sync;
+	adv7511->hsync_polarity = config->hsync_polarity;
+	adv7511->vsync_polarity = config->vsync_polarity;
+	adv7511->rgb = config->input_colorspace == HDMI_COLORSPACE_RGB;
+}
+
+static void adv7511_power_on(struct adv7511 *adv7511)
+{
+	adv7511->current_edid_segment = -1;
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
+			   ADV7511_POWER_POWER_DOWN, 0);
+	if (adv7511->i2c_main->irq) {
+		/*
+		 * Documentation says the INT_ENABLE registers are reset in
+		 * POWER_DOWN mode. My 7511w preserved the bits, however.
+		 * Still, let's be safe and stick to the documentation.
+		 */
+		regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0),
+			     ADV7511_INT0_EDID_READY);
+		regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(1),
+			     ADV7511_INT1_DDC_ERROR);
+	}
+
+	/*
+	 * Per spec it is allowed to pulse the HPD signal to indicate that the
+	 * EDID information has changed. Some monitors do this when they wakeup
+	 * from standby or are enabled. When the HPD goes low the adv7511 is
+	 * reset and the outputs are disabled which might cause the monitor to
+	 * go to standby again. To avoid this we ignore the HPD pin for the
+	 * first few seconds after enabling the output.
+	 */
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
+			   ADV7511_REG_POWER2_HPD_SRC_MASK,
+			   ADV7511_REG_POWER2_HPD_SRC_NONE);
+
+	/*
+	 * Most of the registers are reset during power down or when HPD is low.
+	 */
+	regcache_sync(adv7511->regmap);
+
+	adv7511->powered = true;
+}
+
+static void adv7511_power_off(struct adv7511 *adv7511)
+{
+	/* TODO: setup additional power down modes */
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
+			   ADV7511_POWER_POWER_DOWN,
+			   ADV7511_POWER_POWER_DOWN);
+	regcache_mark_dirty(adv7511->regmap);
+
+	adv7511->powered = false;
+}
+
+/* -----------------------------------------------------------------------------
+ * Interrupt and hotplug detection
+ */
+
+static bool adv7511_hpd(struct adv7511 *adv7511)
+{
+	unsigned int irq0;
+	int ret;
+
+	ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(0), &irq0);
+	if (ret < 0)
+		return false;
+
+	if (irq0 & ADV7511_INT0_HPD) {
+		regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
+			     ADV7511_INT0_HPD);
+		return true;
+	}
+
+	return false;
+}
+
+static int adv7511_irq_process(struct adv7511 *adv7511)
+{
+	unsigned int irq0, irq1;
+	int ret;
+
+	ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(0), &irq0);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(1), &irq1);
+	if (ret < 0)
+		return ret;
+
+	regmap_write(adv7511->regmap, ADV7511_REG_INT(0), irq0);
+	regmap_write(adv7511->regmap, ADV7511_REG_INT(1), irq1);
+
+	if (irq0 & ADV7511_INT0_HPD && adv7511->encoder)
+		drm_helper_hpd_irq_event(adv7511->encoder->dev);
+
+	if (irq0 & ADV7511_INT0_EDID_READY || irq1 & ADV7511_INT1_DDC_ERROR) {
+		adv7511->edid_read = true;
+
+		if (adv7511->i2c_main->irq)
+			wake_up_all(&adv7511->wq);
+	}
+
+	return 0;
+}
+
+static irqreturn_t adv7511_irq_handler(int irq, void *devid)
+{
+	struct adv7511 *adv7511 = devid;
+	int ret;
+
+	ret = adv7511_irq_process(adv7511);
+	return ret < 0 ? IRQ_NONE : IRQ_HANDLED;
+}
+
+/* -----------------------------------------------------------------------------
+ * EDID retrieval
+ */
+
+static int adv7511_wait_for_edid(struct adv7511 *adv7511, int timeout)
+{
+	int ret;
+
+	if (adv7511->i2c_main->irq) {
+		ret = wait_event_interruptible_timeout(adv7511->wq,
+				adv7511->edid_read, msecs_to_jiffies(timeout));
+	} else {
+		for (; timeout > 0; timeout -= 25) {
+			ret = adv7511_irq_process(adv7511);
+			if (ret < 0)
+				break;
+
+			if (adv7511->edid_read)
+				break;
+
+			msleep(25);
+		}
+	}
+
+	return adv7511->edid_read ? 0 : -EIO;
+}
+
+static int adv7511_get_edid_block(void *data, u8 *buf, unsigned int block,
+				  size_t len)
+{
+	struct adv7511 *adv7511 = data;
+	struct i2c_msg xfer[2];
+	uint8_t offset;
+	unsigned int i;
+	int ret;
+
+	if (len > 128)
+		return -EINVAL;
+
+	if (adv7511->current_edid_segment != block / 2) {
+		unsigned int status;
+
+		ret = regmap_read(adv7511->regmap, ADV7511_REG_DDC_STATUS,
+				  &status);
+		if (ret < 0)
+			return ret;
+
+		if (status != 2) {
+			adv7511->edid_read = false;
+			regmap_write(adv7511->regmap, ADV7511_REG_EDID_SEGMENT,
+				     block);
+			ret = adv7511_wait_for_edid(adv7511, 200);
+			if (ret < 0)
+				return ret;
+		}
+
+		/* Break this apart, hopefully more I2C controllers will
+		 * support 64 byte transfers than 256 byte transfers
+		 */
+
+		xfer[0].addr = adv7511->i2c_edid->addr;
+		xfer[0].flags = 0;
+		xfer[0].len = 1;
+		xfer[0].buf = &offset;
+		xfer[1].addr = adv7511->i2c_edid->addr;
+		xfer[1].flags = I2C_M_RD;
+		xfer[1].len = 64;
+		xfer[1].buf = adv7511->edid_buf;
+
+		offset = 0;
+
+		for (i = 0; i < 4; ++i) {
+			ret = i2c_transfer(adv7511->i2c_edid->adapter, xfer,
+					   ARRAY_SIZE(xfer));
+			if (ret < 0)
+				return ret;
+			else if (ret != 2)
+				return -EIO;
+
+			xfer[1].buf += 64;
+			offset += 64;
+		}
+
+		adv7511->current_edid_segment = block / 2;
+	}
+
+	if (block % 2 == 0)
+		memcpy(buf, adv7511->edid_buf, len);
+	else
+		memcpy(buf, adv7511->edid_buf + 128, len);
+
+	return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * Encoder operations
+ */
+
+static int adv7511_get_modes(struct drm_encoder *encoder,
+			     struct drm_connector *connector)
+{
+	struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
+	struct edid *edid;
+	unsigned int count;
+
+	/* Reading the EDID only works if the device is powered */
+	if (!adv7511->powered) {
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
+				   ADV7511_POWER_POWER_DOWN, 0);
+		if (adv7511->i2c_main->irq) {
+			regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0),
+				     ADV7511_INT0_EDID_READY);
+			regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(1),
+				     ADV7511_INT1_DDC_ERROR);
+		}
+		adv7511->current_edid_segment = -1;
+	}
+
+	edid = drm_do_get_edid(connector, adv7511_get_edid_block, adv7511);
+
+	if (!adv7511->powered)
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
+				   ADV7511_POWER_POWER_DOWN,
+				   ADV7511_POWER_POWER_DOWN);
+
+	kfree(adv7511->edid);
+	adv7511->edid = edid;
+	if (!edid)
+		return 0;
+
+	drm_mode_connector_update_edid_property(connector, edid);
+	count = drm_add_edid_modes(connector, edid);
+
+	adv7511_set_config_csc(adv7511, connector, adv7511->rgb);
+
+	return count;
+}
+
+static void adv7511_encoder_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
+
+	if (mode == DRM_MODE_DPMS_ON)
+		adv7511_power_on(adv7511);
+	else
+		adv7511_power_off(adv7511);
+}
+
+static enum drm_connector_status
+adv7511_encoder_detect(struct drm_encoder *encoder,
+		       struct drm_connector *connector)
+{
+	struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
+	enum drm_connector_status status;
+	unsigned int val;
+	bool hpd;
+	int ret;
+
+	ret = regmap_read(adv7511->regmap, ADV7511_REG_STATUS, &val);
+	if (ret < 0)
+		return connector_status_disconnected;
+
+	if (val & ADV7511_STATUS_HPD)
+		status = connector_status_connected;
+	else
+		status = connector_status_disconnected;
+
+	hpd = adv7511_hpd(adv7511);
+
+	/* The chip resets itself when the cable is disconnected, so in case
+	 * there is a pending HPD interrupt and the cable is connected there was
+	 * at least one transition from disconnected to connected and the chip
+	 * has to be reinitialized. */
+	if (status == connector_status_connected && hpd && adv7511->powered) {
+		regcache_mark_dirty(adv7511->regmap);
+		adv7511_power_on(adv7511);
+		adv7511_get_modes(encoder, connector);
+		if (adv7511->status == connector_status_connected)
+			status = connector_status_disconnected;
+	} else {
+		/* Renable HPD sensing */
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
+				   ADV7511_REG_POWER2_HPD_SRC_MASK,
+				   ADV7511_REG_POWER2_HPD_SRC_BOTH);
+	}
+
+	adv7511->status = status;
+	return status;
+}
+
+static int adv7511_encoder_mode_valid(struct drm_encoder *encoder,
+				      struct drm_display_mode *mode)
+{
+	if (mode->clock > 165000)
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
+static void adv7511_encoder_mode_set(struct drm_encoder *encoder,
+				     struct drm_display_mode *mode,
+				     struct drm_display_mode *adj_mode)
+{
+	struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
+	unsigned int low_refresh_rate;
+	unsigned int hsync_polarity = 0;
+	unsigned int vsync_polarity = 0;
+
+	if (adv7511->embedded_sync) {
+		unsigned int hsync_offset, hsync_len;
+		unsigned int vsync_offset, vsync_len;
+
+		hsync_offset = adj_mode->crtc_hsync_start -
+			       adj_mode->crtc_hdisplay;
+		vsync_offset = adj_mode->crtc_vsync_start -
+			       adj_mode->crtc_vdisplay;
+		hsync_len = adj_mode->crtc_hsync_end -
+			    adj_mode->crtc_hsync_start;
+		vsync_len = adj_mode->crtc_vsync_end -
+			    adj_mode->crtc_vsync_start;
+
+		/* The hardware vsync generator has a off-by-one bug */
+		vsync_offset += 1;
+
+		regmap_write(adv7511->regmap, ADV7511_REG_HSYNC_PLACEMENT_MSB,
+			     ((hsync_offset >> 10) & 0x7) << 5);
+		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(0),
+			     (hsync_offset >> 2) & 0xff);
+		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(1),
+			     ((hsync_offset & 0x3) << 6) |
+			     ((hsync_len >> 4) & 0x3f));
+		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(2),
+			     ((hsync_len & 0xf) << 4) |
+			     ((vsync_offset >> 6) & 0xf));
+		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(3),
+			     ((vsync_offset & 0x3f) << 2) |
+			     ((vsync_len >> 8) & 0x3));
+		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(4),
+			     vsync_len & 0xff);
+
+		hsync_polarity = !(adj_mode->flags & DRM_MODE_FLAG_PHSYNC);
+		vsync_polarity = !(adj_mode->flags & DRM_MODE_FLAG_PVSYNC);
+	} else {
+		enum adv7511_sync_polarity mode_hsync_polarity;
+		enum adv7511_sync_polarity mode_vsync_polarity;
+
+		/**
+		 * If the input signal is always low or always high we want to
+		 * invert or let it passthrough depending on the polarity of the
+		 * current mode.
+		 **/
+		if (adj_mode->flags & DRM_MODE_FLAG_NHSYNC)
+			mode_hsync_polarity = ADV7511_SYNC_POLARITY_LOW;
+		else
+			mode_hsync_polarity = ADV7511_SYNC_POLARITY_HIGH;
+
+		if (adj_mode->flags & DRM_MODE_FLAG_NVSYNC)
+			mode_vsync_polarity = ADV7511_SYNC_POLARITY_LOW;
+		else
+			mode_vsync_polarity = ADV7511_SYNC_POLARITY_HIGH;
+
+		if (adv7511->hsync_polarity != mode_hsync_polarity &&
+		    adv7511->hsync_polarity !=
+		    ADV7511_SYNC_POLARITY_PASSTHROUGH)
+			hsync_polarity = 1;
+
+		if (adv7511->vsync_polarity != mode_vsync_polarity &&
+		    adv7511->vsync_polarity !=
+		    ADV7511_SYNC_POLARITY_PASSTHROUGH)
+			vsync_polarity = 1;
+	}
+
+	if (mode->vrefresh <= 24000)
+		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_24HZ;
+	else if (mode->vrefresh <= 25000)
+		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_25HZ;
+	else if (mode->vrefresh <= 30000)
+		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_30HZ;
+	else
+		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_NONE;
+
+	regmap_update_bits(adv7511->regmap, 0xfb,
+		0x6, low_refresh_rate << 1);
+	regmap_update_bits(adv7511->regmap, 0x17,
+		0x60, (vsync_polarity << 6) | (hsync_polarity << 5));
+
+	/*
+	 * TODO Test first order 4:2:2 to 4:4:4 up conversion method, which is
+	 * supposed to give better results.
+	 */
+
+	adv7511->f_tmds = mode->clock;
+}
+
+static const struct drm_encoder_slave_funcs adv7511_encoder_funcs = {
+	.dpms = adv7511_encoder_dpms,
+	.mode_valid = adv7511_encoder_mode_valid,
+	.mode_set = adv7511_encoder_mode_set,
+	.detect = adv7511_encoder_detect,
+	.get_modes = adv7511_get_modes,
+};
+
+/* -----------------------------------------------------------------------------
+ * Probe & remove
+ */
+
+static int adv7511_parse_dt(struct device_node *np,
+			    struct adv7511_link_config *config)
+{
+	const char *str;
+	int ret;
+
+	memset(config, 0, sizeof(*config));
+
+	of_property_read_u32(np, "adi,input-depth", &config->input_color_depth);
+	if (config->input_color_depth != 8 && config->input_color_depth != 10 &&
+	    config->input_color_depth != 12)
+		return -EINVAL;
+
+	ret = of_property_read_string(np, "adi,input-colorspace", &str);
+	if (ret < 0)
+		return ret;
+
+	if (!strcmp(str, "rgb"))
+		config->input_colorspace = HDMI_COLORSPACE_RGB;
+	else if (!strcmp(str, "yuv422"))
+		config->input_colorspace = HDMI_COLORSPACE_YUV422;
+	else if (!strcmp(str, "yuv444"))
+		config->input_colorspace = HDMI_COLORSPACE_YUV444;
+	else
+		return -EINVAL;
+
+	ret = of_property_read_string(np, "adi,input-clock", &str);
+	if (ret < 0)
+		return ret;
+
+	if (!strcmp(str, "1x"))
+		config->input_clock = ADV7511_INPUT_CLOCK_1X;
+	else if (!strcmp(str, "2x"))
+		config->input_clock = ADV7511_INPUT_CLOCK_2X;
+	else if (!strcmp(str, "ddr"))
+		config->input_clock = ADV7511_INPUT_CLOCK_DDR;
+	else
+		return -EINVAL;
+
+	if (config->input_colorspace == HDMI_COLORSPACE_YUV422 ||
+	    config->input_clock != ADV7511_INPUT_CLOCK_1X) {
+		ret = of_property_read_u32(np, "adi,input-style",
+					   &config->input_style);
+		if (ret)
+			return ret;
+
+		if (config->input_style < 1 || config->input_style > 3)
+			return -EINVAL;
+
+		ret = of_property_read_string(np, "adi,input-justification",
+					      &str);
+		if (ret < 0)
+			return ret;
+
+		if (!strcmp(str, "left"))
+			config->input_justification =
+				ADV7511_INPUT_JUSTIFICATION_LEFT;
+		else if (!strcmp(str, "evenly"))
+			config->input_justification =
+				ADV7511_INPUT_JUSTIFICATION_EVENLY;
+		else if (!strcmp(str, "right"))
+			config->input_justification =
+				ADV7511_INPUT_JUSTIFICATION_RIGHT;
+		else
+			return -EINVAL;
+
+	} else {
+		config->input_style = 1;
+		config->input_justification = ADV7511_INPUT_JUSTIFICATION_LEFT;
+	}
+
+	of_property_read_u32(np, "adi,clock-delay", &config->clock_delay);
+	if (config->clock_delay < -1200 || config->clock_delay > 1600)
+		return -EINVAL;
+
+	config->embedded_sync = of_property_read_bool(np, "adi,embedded-sync");
+
+	/* Hardcode the sync pulse configurations for now. */
+	config->sync_pulse = ADV7511_INPUT_SYNC_PULSE_NONE;
+	config->vsync_polarity = ADV7511_SYNC_POLARITY_PASSTHROUGH;
+	config->hsync_polarity = ADV7511_SYNC_POLARITY_PASSTHROUGH;
+
+	return 0;
+}
+
+static const int edid_i2c_addr = 0x7e;
+static const int packet_i2c_addr = 0x70;
+static const int cec_i2c_addr = 0x78;
+
+static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
+{
+	struct adv7511_link_config link_config;
+	struct adv7511 *adv7511;
+	struct device *dev = &i2c->dev;
+	unsigned int val;
+	int ret;
+
+	if (!dev->of_node)
+		return -EINVAL;
+
+	adv7511 = devm_kzalloc(dev, sizeof(*adv7511), GFP_KERNEL);
+	if (!adv7511)
+		return -ENOMEM;
+
+	adv7511->powered = false;
+	adv7511->status = connector_status_disconnected;
+
+	ret = adv7511_parse_dt(dev->of_node, &link_config);
+	if (ret)
+		return ret;
+
+	/*
+	 * The power down GPIO is optional. If present, toggle it from active to
+	 * inactive to wake up the encoder.
+	 */
+	adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH);
+	if (IS_ERR(adv7511->gpio_pd))
+		return PTR_ERR(adv7511->gpio_pd);
+
+	if (adv7511->gpio_pd) {
+		mdelay(5);
+		gpiod_set_value_cansleep(adv7511->gpio_pd, 0);
+	}
+
+	adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config);
+	if (IS_ERR(adv7511->regmap))
+		return PTR_ERR(adv7511->regmap);
+
+	ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val);
+	if (ret)
+		return ret;
+	dev_dbg(dev, "Rev. %d\n", val);
+
+	ret = regmap_register_patch(adv7511->regmap, adv7511_fixed_registers,
+				    ARRAY_SIZE(adv7511_fixed_registers));
+	if (ret)
+		return ret;
+
+	regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, edid_i2c_addr);
+	regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
+		     packet_i2c_addr);
+	regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR, cec_i2c_addr);
+	adv7511_packet_disable(adv7511, 0xffff);
+
+	adv7511->i2c_main = i2c;
+	adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
+	if (!adv7511->i2c_edid)
+		return -ENOMEM;
+
+	if (i2c->irq) {
+		init_waitqueue_head(&adv7511->wq);
+
+		ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
+						adv7511_irq_handler,
+						IRQF_ONESHOT, dev_name(dev),
+						adv7511);
+		if (ret)
+			goto err_i2c_unregister_device;
+	}
+
+	/* CEC is unused for now */
+	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
+		     ADV7511_CEC_CTRL_POWER_DOWN);
+
+	adv7511_power_off(adv7511);
+
+	i2c_set_clientdata(i2c, adv7511);
+
+#ifdef CONFIG_DRM_I2C_ADV7511_AUDIO
+	adv7511_audio_init(&i2c->dev);
+#endif
+
+	adv7511_set_link_config(adv7511, &link_config);
+
+	/* Enable HDMI mode */
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG,
+			ADV7511_HDMI_CFG_MODE_MASK,
+			ADV7511_HDMI_CFG_MODE_HDMI);
+
+	return 0;
+
+err_i2c_unregister_device:
+	i2c_unregister_device(adv7511->i2c_edid);
+
+	return ret;
+}
+
+static int adv7511_remove(struct i2c_client *i2c)
+{
+	struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
+
+	i2c_unregister_device(adv7511->i2c_edid);
+
+	kfree(adv7511->edid);
+
+	return 0;
+}
+
+static int adv7511_encoder_init(struct i2c_client *i2c, struct drm_device *dev,
+				struct drm_encoder_slave *encoder)
+{
+
+	struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
+
+	encoder->slave_priv = adv7511;
+	encoder->slave_funcs = &adv7511_encoder_funcs;
+
+	adv7511->encoder = &encoder->base;
+
+	return 0;
+}
+
+static const struct i2c_device_id adv7511_i2c_ids[] = {
+	{ "adv7511", 0 },
+	{ "adv7511w", 0 },
+	{ "adv7513", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adv7511_i2c_ids);
+
+static const struct of_device_id adv7511_of_ids[] = {
+	{ .compatible = "adi,adv7511", },
+	{ .compatible = "adi,adv7511w", },
+	{ .compatible = "adi,adv7513", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, adv7511_of_ids);
+
+static struct drm_i2c_encoder_driver adv7511_driver = {
+	.i2c_driver = {
+		.driver = {
+			.name = "adv7511",
+			.of_match_table = adv7511_of_ids,
+		},
+		.id_table = adv7511_i2c_ids,
+		.probe = adv7511_probe,
+		.remove = adv7511_remove,
+	},
+
+	.encoder_init = adv7511_encoder_init,
+};
+
+static int __init adv7511_init(void)
+{
+	return drm_i2c_encoder_register(THIS_MODULE, &adv7511_driver);
+}
+module_init(adv7511_init);
+
+static void __exit adv7511_exit(void)
+{
+	drm_i2c_encoder_unregister(&adv7511_driver);
+}
+module_exit(adv7511_exit);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("ADV7511 HDMI transmitter driver");
+MODULE_LICENSE("GPL");
diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h
index 964b7de..539c091 100644
--- a/include/sound/soc-dai.h
+++ b/include/sound/soc-dai.h
@@ -33,6 +33,7 @@  struct snd_compr_stream;
 #define SND_SOC_DAIFMT_DSP_B		5 /* L data MSB during FRM LRC */
 #define SND_SOC_DAIFMT_AC97		6 /* AC97 */
 #define SND_SOC_DAIFMT_PDM		7 /* Pulse density modulation */
+#define SND_SOC_DAIFMT_SPDIF		8 /* SPDIF */
 
 /* left and right justified also known as MSB and LSB respectively */
 #define SND_SOC_DAIFMT_MSB		SND_SOC_DAIFMT_LEFT_J