diff mbox

[v7,3/3] irqchip: add nps Internal and external irqchips

Message ID 1459542085-3065-4-git-send-email-noamca@mellanox.com
State New
Headers show

Commit Message

Noam Camus April 1, 2016, 8:21 p.m. UTC
From: Noam Camus <noamc@ezchip.com>

Adding EZchip NPS400 support.
Internal interrupts are handled by Multi Thread Manager (MTM)
Once interrupt is serviced MTM is acked for deactivating the interrupt.
External interrupts are handled by MTM as well as at Global Interrupt
Controller (GIC) e.g. serial and network devices.

Signed-off-by: Noam Camus <noamc@ezchip.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
---
v7:
Rebased on latest HEAD (4.6-rc1)

v6:
Files headers changed to start with:
Copyright (c) 2016, Mellanox Technologies
...

This is due to the acquisition of EZchip made by Mellanox.
One can still find "EZchip" used in tree, and this is ok.

This patch set is a requierement before I can insert new platform to ARC,
one that supports the NPS400 SoC.

v5:
Clocksource, irqchip - Fix gracefull return.
				replace call to panic() with pr_err() and proper return value.

v4:
clocksource -- Apply all Daniel comments (Thanks)
				Handle gracefull return and also using clocksoure mmio driver at init

v3:
irqchip - Fix ARM build failure by adding missing include of linux/irq.h
clocksource -- Avoid 64bit arch's to build driver by adding new dependency !PHYS_ADDR_T_64BIT
				This is since we use explicit io access of 32 bit. So for test coverage we allow
				not only build for ARC, but restrict it to 32 bit arch's.
irqchip - Apply all Thomas comments (Thank you)

v2:
Add header file include/soc/nps/common.h.
Now to build we do not depend on ARC subtree.

General summay:
Both drivers are now apart of previous basic patch set of new platform for ARC.
The rest is now can be seen at ARC srctree:
https://git.kernel.org/cgit/linux/kernel/git/vgupta/arc.git/

Now ARC is supporting DT for clockevents and the interrupt controller ARC
uses irq domain handling.

Compare to last version now clocksource driver do not include clockevent registration
since NPS400 can use ARC generic driver.

Compare to last version now irqchip driver sets domain as default since it is the root domain.
Also mapping of IPI is done in this driver.

Last thing is that drivers can be build cleanly for i386 (still runs only for ARC)
Note: in order to build we need to merge drivers into srctree which includes new header:
soc/nps/common.h
This header is part of patch set applied to ARC srctree.

Regards,
Noam Camus
---
 .../interrupt-controller/ezchip,nps400-ic.txt      |   17 ++
 drivers/irqchip/Kconfig                            |    6 +
 drivers/irqchip/Makefile                           |    1 +
 drivers/irqchip/irq-eznps.c                        |  165 ++++++++++++++++++++
 4 files changed, 189 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt
 create mode 100644 drivers/irqchip/irq-eznps.c

Comments

kernel test robot April 2, 2016, 6:43 a.m. UTC | #1
Hi Noam,

[auto build test WARNING on tip/irq/core]
[also build test WARNING on v4.6-rc1 next-20160401]
[if your patch is applied to the wrong git tree, please drop us a note to help improving the system]

url:    https://github.com/0day-ci/linux/commits/Noam-Camus/Adding-NPS400-drivers/20160402-044058
config: parisc-allyesconfig (attached as .config)
reproduce:
        wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=parisc 

All warnings (new ones prefixed by >>):

   In file included from drivers/irqchip/irq-eznps.c:39:0:
>> include/soc/nps/common.h:37:0: warning: "IPI_IRQ" redefined
    #define IPI_IRQ     5
    ^
   In file included from include/linux/irq.h:26:0,
                    from arch/parisc/include/asm/hardirq.h:12,
                    from include/linux/hardirq.h:8,
                    from include/linux/interrupt.h:12,
                    from drivers/irqchip/irq-eznps.c:33:
   arch/parisc/include/asm/irq.h:24:0: note: this is the location of the previous definition
    #define IPI_IRQ  (CPU_IRQ_BASE + 1)
    ^

vim +/IPI_IRQ +37 include/soc/nps/common.h

4ff0d081 Noam Camus 2016-04-01  21   *        provided with the distribution.
4ff0d081 Noam Camus 2016-04-01  22   *
4ff0d081 Noam Camus 2016-04-01  23   * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
4ff0d081 Noam Camus 2016-04-01  24   * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
4ff0d081 Noam Camus 2016-04-01  25   * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
4ff0d081 Noam Camus 2016-04-01  26   * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
4ff0d081 Noam Camus 2016-04-01  27   * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
4ff0d081 Noam Camus 2016-04-01  28   * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
4ff0d081 Noam Camus 2016-04-01  29   * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
4ff0d081 Noam Camus 2016-04-01  30   * SOFTWARE.
4ff0d081 Noam Camus 2016-04-01  31   */
4ff0d081 Noam Camus 2016-04-01  32  
4ff0d081 Noam Camus 2016-04-01  33  #ifndef SOC_NPS_COMMON_H
4ff0d081 Noam Camus 2016-04-01  34  #define SOC_NPS_COMMON_H
4ff0d081 Noam Camus 2016-04-01  35  
4ff0d081 Noam Camus 2016-04-01  36  #ifdef CONFIG_SMP
4ff0d081 Noam Camus 2016-04-01 @37  #define IPI_IRQ					5
4ff0d081 Noam Camus 2016-04-01  38  #endif
4ff0d081 Noam Camus 2016-04-01  39  
4ff0d081 Noam Camus 2016-04-01  40  #define NPS_HOST_REG_BASE			0xF6000000
4ff0d081 Noam Camus 2016-04-01  41  
4ff0d081 Noam Camus 2016-04-01  42  #define NPS_MSU_BLKID				0x018
4ff0d081 Noam Camus 2016-04-01  43  
4ff0d081 Noam Camus 2016-04-01  44  #define CTOP_INST_RSPI_GIC_0_R12		0x3C56117E
4ff0d081 Noam Camus 2016-04-01  45  #define CTOP_INST_MOV2B_FLIP_R3_B1_B2_INST	0x5B60

:::::: The code at line 37 was first introduced by commit
:::::: 4ff0d0814a05fc7aa0841df0a58bde13f7254c01 soc: Support for EZchip SoC

:::::: TO: Noam Camus <noamc@ezchip.com>
:::::: CC: 0day robot <fengguang.wu@intel.com>

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt
new file mode 100644
index 0000000..888b2b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt
@@ -0,0 +1,17 @@ 
+EZchip NPS Interrupt Controller
+
+Required properties:
+
+- compatible : should be "ezchip,nps400-ic"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+
+
+Example:
+
+intc: interrupt-controller {
+	compatible = "ezchip,nps400-ic";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+};
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 3e12479..1ab632a 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -244,3 +244,9 @@  config IRQ_MXS
 config MVEBU_ODMI
 	bool
 	select GENERIC_MSI_IRQ_DOMAIN
+
+config EZNPS_GIC
+	bool "NPS400 Global Interrupt Manager (GIM)"
+	select IRQ_DOMAIN
+	help
+	  Support the EZchip NPS400 global interrupt controller
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index b03cfcb..9d54d53 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -65,3 +65,4 @@  obj-$(CONFIG_INGENIC_IRQ)		+= irq-ingenic.o
 obj-$(CONFIG_IMX_GPCV2)			+= irq-imx-gpcv2.o
 obj-$(CONFIG_PIC32_EVIC)		+= irq-pic32-evic.o
 obj-$(CONFIG_MVEBU_ODMI)		+= irq-mvebu-odmi.o
+obj-$(CONFIG_EZNPS_GIC)			+= irq-eznps.o
diff --git a/drivers/irqchip/irq-eznps.c b/drivers/irqchip/irq-eznps.c
new file mode 100644
index 0000000..97e4294
--- /dev/null
+++ b/drivers/irqchip/irq-eznps.c
@@ -0,0 +1,165 @@ 
+/*
+ * Copyright (c) 2016, Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip.h>
+#include <soc/nps/common.h>
+
+#define NPS_NR_CPU_IRQS 8  /* number of interrupt lines of NPS400 CPU */
+#define NPS_TIMER0_IRQ  3
+
+/*
+ * NPS400 core includes an Interrupt Controller (IC) support.
+ * All cores can deactivate level irqs at first level control
+ * at cores mesh layer called MTM.
+ * For devices out side chip e.g. uart, network there is another
+ * level called Global Interrupt Manager (GIM).
+ * This second level can control level and edge interrupt.
+ *
+ * NOTE: AUX_IENABLE and CTOP_AUX_IACK are auxiliary registers
+ * with private HW copy per CPU.
+ */
+
+static void nps400_irq_mask(struct irq_data *irqd)
+{
+	unsigned int ienb;
+	unsigned int irq = irqd_to_hwirq(irqd);
+
+	ienb = read_aux_reg(AUX_IENABLE);
+	ienb &= ~(1 << irq);
+	write_aux_reg(AUX_IENABLE, ienb);
+}
+
+static void nps400_irq_unmask(struct irq_data *irqd)
+{
+	unsigned int ienb;
+	unsigned int irq = irqd_to_hwirq(irqd);
+
+	ienb = read_aux_reg(AUX_IENABLE);
+	ienb |= (1 << irq);
+	write_aux_reg(AUX_IENABLE, ienb);
+}
+
+static void nps400_irq_eoi_global(struct irq_data *irqd)
+{
+	unsigned int __maybe_unused irq = irqd_to_hwirq(irqd);
+
+	write_aux_reg(CTOP_AUX_IACK, 1 << irq);
+
+	/* Don't ack GIC before all device access attempts are done */
+	mb();
+
+	nps_ack_gic();
+}
+
+static void nps400_irq_eoi(struct irq_data *irqd)
+{
+	unsigned int __maybe_unused irq = irqd_to_hwirq(irqd);
+
+	write_aux_reg(CTOP_AUX_IACK, 1 << irq);
+}
+
+static struct irq_chip nps400_irq_chip_fasteoi = {
+	.name		= "NPS400 IC Global",
+	.irq_mask	= nps400_irq_mask,
+	.irq_unmask	= nps400_irq_unmask,
+	.irq_eoi	= nps400_irq_eoi_global,
+};
+
+static struct irq_chip nps400_irq_chip_percpu = {
+	.name		= "NPS400 IC",
+	.irq_mask	= nps400_irq_mask,
+	.irq_unmask	= nps400_irq_unmask,
+	.irq_eoi	= nps400_irq_eoi,
+};
+
+static int nps400_irq_map(struct irq_domain *d, unsigned int virq,
+			  irq_hw_number_t hw)
+{
+	switch (hw) {
+	case NPS_TIMER0_IRQ:
+#ifdef CONFIG_SMP
+	case IPI_IRQ:
+#endif
+		irq_set_percpu_devid(virq);
+		irq_set_chip_and_handler(virq, &nps400_irq_chip_percpu,
+					 handle_percpu_devid_irq);
+		break;
+	default:
+		irq_set_chip_and_handler(virq, &nps400_irq_chip_fasteoi,
+					 handle_fasteoi_irq);
+		break;
+	}
+
+	return 0;
+}
+
+static const struct irq_domain_ops nps400_irq_ops = {
+	.xlate = irq_domain_xlate_onecell,
+	.map = nps400_irq_map,
+};
+
+static int __init nps400_of_init(struct device_node *node,
+				 struct device_node *parent)
+{
+	static struct irq_domain *nps400_root_domain;
+
+	if (parent) {
+		pr_err("DeviceTree incore ic not a root irq controller\n");
+		return -EINVAL;
+	}
+
+	nps400_root_domain = irq_domain_add_linear(node, NPS_NR_CPU_IRQS,
+						   &nps400_irq_ops, NULL);
+
+	if (!nps400_root_domain) {
+		pr_err("nps400 root irq domain not avail\n");
+		return -ENOMEM;
+	}
+
+	/*
+	 * Needed for primary domain lookup to succeed
+	 * This is a primary irqchip, and can never have a parent
+	 */
+	irq_set_default_host(nps400_root_domain);
+
+#ifdef CONFIG_SMP
+	irq_create_mapping(nps400_root_domain, IPI_IRQ);
+#endif
+
+	return 0;
+}
+IRQCHIP_DECLARE(ezchip_nps400_ic, "ezchip,nps400-ic", nps400_of_init);