[1/4] gpio: Add AXP209 GPIO driver

Message ID	1457520614-32239-2-git-send-email-maxime.ripard@free-electrons.com
State	New
Headers	show Return-Path: <linux-gpio-owner@vger.kernel.org> From: Maxime Ripard <maxime.ripard@free-electrons.com> To: Linus Walleij <linus.walleij@linaro.org>, Alexandre Courbot <gnurou@gmail.com>, Lee Jones <lee.jones@linaro.org>, Chen-Yu Tsai <wens@csie.org> Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com, Hans de Goede <hdegoede@redhat.com>, Maxime Ripard <maxime.ripard@free-electrons.com> Subject: [PATCH 1/4] gpio: Add AXP209 GPIO driver Date: Wed, 9 Mar 2016 11:50:11 +0100 Message-Id: <1457520614-32239-2-git-send-email-maxime.ripard@free-electrons.com> In-Reply-To: <1457520614-32239-1-git-send-email-maxime.ripard@free-electrons.com> References: <1457520614-32239-1-git-send-email-maxime.ripard@free-electrons.com> Sender: linux-gpio-owner@vger.kernel.org Precedence: bulk

diff --git a/Documentation/devicetree/bindings/gpio/gpio-axp209.txt b/Documentation/devicetree/bindings/gpio/gpio-axp209.txt new file mode 100644 index 000000000000..a6611304dd3c --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-axp209.txt @@ -0,0 +1,30 @@ +AXP209 GPIO controller + +This driver follows the usual GPIO bindings found in +Documentation/devicetree/bindings/gpio/gpio.txt + +Required properties: +- compatible: Should be "x-powers,axp209-gpio" +- #gpio-cells: Should be two. The first cell is the pin number and the + second is the GPIO flags. +- gpio-controller: Marks the device node as a GPIO controller. + +This node must be a subnode of the axp20x PMIC, documented in +Documentation/devicetree/bindings/mfd/axp20x.txt + +Example: + +axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + + axp_gpio: gpio { + compatible = "x-powers,axp209-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; +}; diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 1118fef45a86..cd5ab93ac197 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -136,6 +136,12 @@ config GPIO_ATH79 Select this option to enable GPIO driver for Atheros AR71XX/AR724X/AR913X SoC devices. +config GPIO_AXP209 + tristate "X-Powers AXP209 PMIC GPIO Support" + depends on MFD_AXP20X + help + Say yes to enable GPIO support for the AXP209 PMIC + config GPIO_BCM_KONA bool "Broadcom Kona GPIO" depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST) diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 6f969df1431a..e9e7fbe80ab7 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o obj-$(CONFIG_GPIO_AMDPT) += gpio-amdpt.o obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o +obj-$(CONFIG_GPIO_AXP209) += gpio-axp209.o obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o diff --git a/drivers/gpio/gpio-axp209.c b/drivers/gpio/gpio-axp209.c new file mode 100644 index 000000000000..822f39faaadf --- /dev/null +++ b/drivers/gpio/gpio-axp209.c @@ -0,0 +1,166 @@ +/* + * AXP20x GPIO driver + * + * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/device.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/mfd/axp20x.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +#define AXP20X_GPIO_FUNCTIONS 0x7 +#define AXP20X_GPIO_FUNCTION_OUT_LOW 0 +#define AXP20X_GPIO_FUNCTION_OUT_HIGH 1 +#define AXP20X_GPIO_FUNCTION_INPUT 2 + +struct axp20x_gpio { + struct gpio_chip chip; + struct regmap *regmap; +}; + +struct axp20x_gpio *to_axp20x_gpio(struct gpio_chip *chip) +{ + return container_of(chip, struct axp20x_gpio, chip); +} + +static int axp20x_gpio_get_reg(unsigned offset) +{ + switch (offset) { + case 0: + return AXP20X_GPIO0_CTRL; + case 1: + return AXP20X_GPIO1_CTRL; + case 2: + return AXP20X_GPIO2_CTRL; + } + + return -EINVAL; +} + +static int axp20x_gpio_input(struct gpio_chip *chip, unsigned offset) +{ + struct axp20x_gpio *gpio = to_axp20x_gpio(chip); + int reg; + + reg = axp20x_gpio_get_reg(offset); + if (reg < 0) + return reg; + + return regmap_update_bits(gpio->regmap, reg, + AXP20X_GPIO_FUNCTIONS, + AXP20X_GPIO_FUNCTION_INPUT); +} + +static int axp20x_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct axp20x_gpio *gpio = to_axp20x_gpio(chip); + unsigned int val; + int reg, ret; + + reg = axp20x_gpio_get_reg(offset); + if (reg < 0) + return reg; + + ret = regmap_read(gpio->regmap, reg, &val); + if (ret) + return ret; + + return val & (1 << (offset + 4)); +} + +static int axp20x_gpio_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + struct axp20x_gpio *gpio = to_axp20x_gpio(chip); + int reg; + + reg = axp20x_gpio_get_reg(offset); + if (reg < 0) + return reg; + + return regmap_update_bits(gpio->regmap, reg, + AXP20X_GPIO_FUNCTIONS, + value ? AXP20X_GPIO_FUNCTION_OUT_HIGH + : AXP20X_GPIO_FUNCTION_OUT_LOW); +} + +static void axp20x_gpio_set(struct gpio_chip *chip, unsigned offset, + int value) +{ + axp20x_gpio_output(chip, offset, value); +} + +static int axp20x_gpio_probe(struct platform_device *pdev) +{ + struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); + struct axp20x_gpio *gpio; + int ret; + + if (!of_device_is_available(pdev->dev.of_node)) + return -ENODEV; + + if (!axp20x) { + dev_err(&pdev->dev, "Parent drvdata not set\n"); + return -EINVAL; + } + + gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL); + if (!gpio) + return -ENOMEM; + + gpio->chip.base = -1; + gpio->chip.can_sleep = true; + gpio->chip.dev = &pdev->dev; + gpio->chip.label = dev_name(&pdev->dev); + gpio->chip.owner = THIS_MODULE; + gpio->chip.get = axp20x_gpio_get; + gpio->chip.set = axp20x_gpio_set; + gpio->chip.direction_input = axp20x_gpio_input; + gpio->chip.direction_output = axp20x_gpio_output; + gpio->chip.ngpio = 3; + + gpio->regmap = axp20x->regmap; + + ret = gpiochip_add(&gpio->chip); + if (ret) { + dev_err(&pdev->dev, "Failed to register GPIO chip\n"); + return ret; + } + + dev_info(&pdev->dev, "AXP209 GPIO driver loaded\n"); + + return 0; +} + +static const struct of_device_id axp20x_gpio_match[] = { + { .compatible = "x-powers,axp209-gpio" }, + { } +}; +MODULE_DEVICE_TABLE(of, axp20x_gpio_match); + +static struct platform_driver axp20x_gpio_driver = { + .probe = axp20x_gpio_probe, + .driver = { + .name = "axp20x-gpio", + .of_match_table = axp20x_gpio_match, + }, +}; + +module_platform_driver(axp20x_gpio_driver); + +MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>"); +MODULE_DESCRIPTION("AXP20x PMIC GPIO driver"); +MODULE_LICENSE("GPL");

[1/4] gpio: Add AXP209 GPIO driver

Commit Message

Comments

Patch