Message ID | 20100524162325.11133.8579.stgit@ES-J7S4D2J.amer.consind.ge.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
On Mon, May 24, 2010 at 10:25 AM, Martyn Welch <martyn.welch@ge.com> wrote: > Currently the irqs for the i8042, which historically provides keyboard and > mouse (aux) support, is hardwired in the driver rather than parsing the > dts. This patch modifies the powerpc legacy IO code to attempt to parse > the device tree for this information, failing back to the hardcoded values > if it fails. > > Signed-off-by: Martyn Welch <martyn.welch@ge.com> > --- > > v2: This patch no longer requires the DTS files to be modified, reading the > interrupts from the current location as suggested by Grant. > > arch/powerpc/kernel/setup-common.c | 49 ++++++++++++++++++++++++++++++++++-- > drivers/input/serio/i8042-io.h | 8 ++++++ > 2 files changed, 54 insertions(+), 3 deletions(-) > > diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c > index 48f0a00..7f1bb99 100644 > --- a/arch/powerpc/kernel/setup-common.c > +++ b/arch/powerpc/kernel/setup-common.c > @@ -94,6 +94,10 @@ struct screen_info screen_info = { > .orig_video_points = 16 > }; > > +/* Variables required to store legacy IO irq routing */ > +int of_i8042_kbd_irq; > +int of_i8042_aux_irq; > + > #ifdef __DO_IRQ_CANON > /* XXX should go elsewhere eventually */ > int ppc_do_canonicalize_irqs; > @@ -558,13 +562,52 @@ void probe_machine(void) > /* Match a class of boards, not a specific device configuration. */ > int check_legacy_ioport(unsigned long base_port) > { > - struct device_node *parent, *np = NULL; > + struct device_node *parent, *np = NULL, *np_aux = NULL; > int ret = -ENODEV; > > switch(base_port) { > case I8042_DATA_REG: > - if (!(np = of_find_compatible_node(NULL, NULL, "pnpPNP,303"))) > - np = of_find_compatible_node(NULL, NULL, "pnpPNP,f03"); > + np = of_find_compatible_node(NULL, NULL, "pnpPNP,303"); > + if (np) { > + /* Interrupt routing in parent node */ > + parent = of_get_parent(np); > + if (parent) { > + /* > + * Attempt to parse DTS for keyboard irq, > + * fallback to standard. > + */ > + of_i8042_kbd_irq = irq_of_parse_and_map(parent, > + 0); > + if (!of_i8042_kbd_irq) > + of_i8042_kbd_irq = 1; > + > + of_node_put(parent); > + } > + } > + > + np_aux = of_find_compatible_node(NULL, NULL, "pnpPNP,f03"); > + if (np_aux) { > + if (!np) { > + of_node_put(np); > + np = np_aux; > + } > + > + /* Interrupt routing in parent node */ > + parent = of_get_parent(np_aux); > + if (parent) { > + /* > + * Attempt to parse DTS for mouse (aux) irq, > + * fallback to standard. > + */ > + of_i8042_aux_irq = irq_of_parse_and_map(parent, > + 1); > + if (!of_i8042_aux_irq) > + of_i8042_aux_irq = 12; > + > + of_node_put(parent); > + } > + } > + This seems to be a lot more code that you need. The existing code already obtains a pointer to the parent node for you. All you really should need to add is the two calls to irq_of_parse_and_map() for obtaining the kbd and aux irq numbers. > if (np) { > parent = of_get_parent(np); > of_node_put(np); > diff --git a/drivers/input/serio/i8042-io.h b/drivers/input/serio/i8042-io.h > index 847f4aa..8fc8753 100644 > --- a/drivers/input/serio/i8042-io.h > +++ b/drivers/input/serio/i8042-io.h > @@ -19,6 +19,11 @@ > * IRQs. > */ > > +#if defined(CONFIG_PPC) > +extern int of_i8042_kbd_irq; > +extern int of_i8042_aux_irq; > +#endif Please fold these two extern definitions into the #elif defined(CONFIG_PPC) block below. > + > #ifdef __alpha__ > # define I8042_KBD_IRQ 1 > # define I8042_AUX_IRQ (RTC_PORT(0) == 0x170 ? 9 : 12) /* Jensen is special */ > @@ -27,6 +32,9 @@ > #include <asm/irq.h> > #elif defined(CONFIG_SH_CAYMAN) > #include <asm/irq.h> > +#elif defined(CONFIG_PPC) > +#define I8042_KBD_IRQ of_i8042_kbd_irq > +#define I8042_AUX_IRQ of_i8042_aux_irq > #else > # define I8042_KBD_IRQ 1 > # define I8042_AUX_IRQ 12 Cheers, g.
Grant Likely wrote: > On Mon, May 24, 2010 at 10:25 AM, Martyn Welch <martyn.welch@ge.com> wrote: > >> Currently the irqs for the i8042, which historically provides keyboard and >> mouse (aux) support, is hardwired in the driver rather than parsing the >> dts. This patch modifies the powerpc legacy IO code to attempt to parse >> the device tree for this information, failing back to the hardcoded values >> if it fails. >> >> Signed-off-by: Martyn Welch <martyn.welch@ge.com> >> --- >> >> v2: This patch no longer requires the DTS files to be modified, reading the >> interrupts from the current location as suggested by Grant. >> >> arch/powerpc/kernel/setup-common.c | 49 ++++++++++++++++++++++++++++++++++-- >> drivers/input/serio/i8042-io.h | 8 ++++++ >> 2 files changed, 54 insertions(+), 3 deletions(-) >> >> diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c >> index 48f0a00..7f1bb99 100644 >> --- a/arch/powerpc/kernel/setup-common.c >> +++ b/arch/powerpc/kernel/setup-common.c >> @@ -94,6 +94,10 @@ struct screen_info screen_info = { >> .orig_video_points = 16 >> }; >> >> +/* Variables required to store legacy IO irq routing */ >> +int of_i8042_kbd_irq; >> +int of_i8042_aux_irq; >> + >> #ifdef __DO_IRQ_CANON >> /* XXX should go elsewhere eventually */ >> int ppc_do_canonicalize_irqs; >> @@ -558,13 +562,52 @@ void probe_machine(void) >> /* Match a class of boards, not a specific device configuration. */ >> int check_legacy_ioport(unsigned long base_port) >> { >> - struct device_node *parent, *np = NULL; >> + struct device_node *parent, *np = NULL, *np_aux = NULL; >> int ret = -ENODEV; >> >> switch(base_port) { >> case I8042_DATA_REG: >> - if (!(np = of_find_compatible_node(NULL, NULL, "pnpPNP,303"))) >> - np = of_find_compatible_node(NULL, NULL, "pnpPNP,f03"); >> + np = of_find_compatible_node(NULL, NULL, "pnpPNP,303"); >> + if (np) { >> + /* Interrupt routing in parent node */ >> + parent = of_get_parent(np); >> + if (parent) { >> + /* >> + * Attempt to parse DTS for keyboard irq, >> + * fallback to standard. >> + */ >> + of_i8042_kbd_irq = irq_of_parse_and_map(parent, >> + 0); >> + if (!of_i8042_kbd_irq) >> + of_i8042_kbd_irq = 1; >> + >> + of_node_put(parent); >> + } >> + } >> + >> + np_aux = of_find_compatible_node(NULL, NULL, "pnpPNP,f03"); >> + if (np_aux) { >> + if (!np) { >> + of_node_put(np); >> + np = np_aux; >> + } >> + >> + /* Interrupt routing in parent node */ >> + parent = of_get_parent(np_aux); >> + if (parent) { >> + /* >> + * Attempt to parse DTS for mouse (aux) irq, >> + * fallback to standard. >> + */ >> + of_i8042_aux_irq = irq_of_parse_and_map(parent, >> + 1); >> + if (!of_i8042_aux_irq) >> + of_i8042_aux_irq = 12; >> + >> + of_node_put(parent); >> + } >> + } >> + >> > > This seems to be a lot more code that you need. The existing code > already obtains a pointer to the parent node for you. All you really > should need to add is the two calls to irq_of_parse_and_map() for > obtaining the kbd and aux irq numbers. > Your right - new patch on it's way. >> if (np) { >> parent = of_get_parent(np); >> of_node_put(np); >> diff --git a/drivers/input/serio/i8042-io.h b/drivers/input/serio/i8042-io.h >> index 847f4aa..8fc8753 100644 >> --- a/drivers/input/serio/i8042-io.h >> +++ b/drivers/input/serio/i8042-io.h >> @@ -19,6 +19,11 @@ >> * IRQs. >> */ >> >> +#if defined(CONFIG_PPC) >> +extern int of_i8042_kbd_irq; >> +extern int of_i8042_aux_irq; >> +#endif >> > > Please fold these two extern definitions into the #elif > defined(CONFIG_PPC) block below. > Will do. >> + >> #ifdef __alpha__ >> # define I8042_KBD_IRQ 1 >> # define I8042_AUX_IRQ (RTC_PORT(0) == 0x170 ? 9 : 12) /* Jensen is special */ >> @@ -27,6 +32,9 @@ >> #include <asm/irq.h> >> #elif defined(CONFIG_SH_CAYMAN) >> #include <asm/irq.h> >> +#elif defined(CONFIG_PPC) >> +#define I8042_KBD_IRQ of_i8042_kbd_irq >> +#define I8042_AUX_IRQ of_i8042_aux_irq >> #else >> # define I8042_KBD_IRQ 1 >> # define I8042_AUX_IRQ 12 >> > > Cheers, > g. >
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 48f0a00..7f1bb99 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -94,6 +94,10 @@ struct screen_info screen_info = { .orig_video_points = 16 }; +/* Variables required to store legacy IO irq routing */ +int of_i8042_kbd_irq; +int of_i8042_aux_irq; + #ifdef __DO_IRQ_CANON /* XXX should go elsewhere eventually */ int ppc_do_canonicalize_irqs; @@ -558,13 +562,52 @@ void probe_machine(void) /* Match a class of boards, not a specific device configuration. */ int check_legacy_ioport(unsigned long base_port) { - struct device_node *parent, *np = NULL; + struct device_node *parent, *np = NULL, *np_aux = NULL; int ret = -ENODEV; switch(base_port) { case I8042_DATA_REG: - if (!(np = of_find_compatible_node(NULL, NULL, "pnpPNP,303"))) - np = of_find_compatible_node(NULL, NULL, "pnpPNP,f03"); + np = of_find_compatible_node(NULL, NULL, "pnpPNP,303"); + if (np) { + /* Interrupt routing in parent node */ + parent = of_get_parent(np); + if (parent) { + /* + * Attempt to parse DTS for keyboard irq, + * fallback to standard. + */ + of_i8042_kbd_irq = irq_of_parse_and_map(parent, + 0); + if (!of_i8042_kbd_irq) + of_i8042_kbd_irq = 1; + + of_node_put(parent); + } + } + + np_aux = of_find_compatible_node(NULL, NULL, "pnpPNP,f03"); + if (np_aux) { + if (!np) { + of_node_put(np); + np = np_aux; + } + + /* Interrupt routing in parent node */ + parent = of_get_parent(np_aux); + if (parent) { + /* + * Attempt to parse DTS for mouse (aux) irq, + * fallback to standard. + */ + of_i8042_aux_irq = irq_of_parse_and_map(parent, + 1); + if (!of_i8042_aux_irq) + of_i8042_aux_irq = 12; + + of_node_put(parent); + } + } + if (np) { parent = of_get_parent(np); of_node_put(np); diff --git a/drivers/input/serio/i8042-io.h b/drivers/input/serio/i8042-io.h index 847f4aa..8fc8753 100644 --- a/drivers/input/serio/i8042-io.h +++ b/drivers/input/serio/i8042-io.h @@ -19,6 +19,11 @@ * IRQs. */ +#if defined(CONFIG_PPC) +extern int of_i8042_kbd_irq; +extern int of_i8042_aux_irq; +#endif + #ifdef __alpha__ # define I8042_KBD_IRQ 1 # define I8042_AUX_IRQ (RTC_PORT(0) == 0x170 ? 9 : 12) /* Jensen is special */ @@ -27,6 +32,9 @@ #include <asm/irq.h> #elif defined(CONFIG_SH_CAYMAN) #include <asm/irq.h> +#elif defined(CONFIG_PPC) +#define I8042_KBD_IRQ of_i8042_kbd_irq +#define I8042_AUX_IRQ of_i8042_aux_irq #else # define I8042_KBD_IRQ 1 # define I8042_AUX_IRQ 12
Currently the irqs for the i8042, which historically provides keyboard and mouse (aux) support, is hardwired in the driver rather than parsing the dts. This patch modifies the powerpc legacy IO code to attempt to parse the device tree for this information, failing back to the hardcoded values if it fails. Signed-off-by: Martyn Welch <martyn.welch@ge.com> --- v2: This patch no longer requires the DTS files to be modified, reading the interrupts from the current location as suggested by Grant. arch/powerpc/kernel/setup-common.c | 49 ++++++++++++++++++++++++++++++++++-- drivers/input/serio/i8042-io.h | 8 ++++++ 2 files changed, 54 insertions(+), 3 deletions(-) -- Martyn Welch (Principal Software Engineer) | Registered in England and GE Intelligent Platforms | Wales (3828642) at 100 T +44(0)127322748 | Barbirolli Square, Manchester, E martyn.welch@ge.com | M2 3AB VAT:GB 927559189