Message ID | 20160216215313.15f228fe@gmx.net |
---|---|
State | Not Applicable |
Headers | show |
Peter, All, On Tue, Feb 16, 2016 at 9:53 PM, Peter Seiderer <ps.report@gmx.net> wrote: > > Hello Gary, > > On Mon, 1 Feb 2016 22:55:58 +0100, Gary Bisson <gary.bisson@boundarydevices.com> wrote: > > > <snip> > > +LIBIMXVPUAPI_VERSION = 0.10.1 > > +LIBIMXVPUAPI_SITE = $(call github,Freescale,libimxvpuapi,$(LIBIMXVPUAPI_VERSION)) > > +LIBIMXVPUAPI_LICENSE = LGPLv2.1+ > > +LIBIMXVPUAPI_LICENSE_FILES = LICENSE > > +LIBIMXVPUAPI_DEPENDENCIES = host-pkgconf host-python imx-vpu > > +LIBIMXVPUAPI_INSTALL_STAGING = YES > > + > > +define LIBIMXVPUAPI_CONFIGURE_CMDS > > + cd $(@D); \ > > + $(TARGET_CONFIGURE_OPTS) $(HOST_DIR)/usr/bin/python2 ./waf configure \ > > + --prefix=/usr > > +endef > > On my x86_64 (OpenSUSE-13.2) host build the libs and libimxvpuapi.pc > are installed into $(STAGING_DIR)/usr/lib64 and $(TARGET_DIR)/usr/lib64. > > To be usable by eg. gst1-imx the install path should be $(STAGING_DIR)/usr/lib > and $(TARGET_DIR)/usr/lib. To achieve this I added '--libdir=/usr/lib' to > overwrite the default '/usr/lib64': I'd like to understand why it behaves like this with your setup. I'm using a 64-bit OS too (Debian Testing) but the libs go to /usr/lib as expected. Could you pastebin the full log of libimxvpuapi build, your buildroot configuration as well as you 'env'? > --- a/package/libimxvpuapi/libimxvpuapi.mk > +++ b/package/libimxvpuapi/libimxvpuapi.mk > @@ -14,7 +14,7 @@ LIBIMXVPUAPI_INSTALL_STAGING = YES > define LIBIMXVPUAPI_CONFIGURE_CMDS > cd $(@D); \ > $(TARGET_CONFIGURE_OPTS) $(HOST_DIR)/usr/bin/python2 ./waf configure \ > - --prefix=/usr > + --prefix=/usr --libdir=/usr/lib > endef > > define LIBIMXVPUAPI_BUILD_CMDS > > > With this you can add my > > Tested-by: Peter Seiderer <ps.report@gmx.net> > > for '...! imxvpudec ! imxipuvideosink' Ok, I'll do that once I understand the difference which requires this libdir argument. > But I had problems using the imxeglvivsink element and > with qt5 eglfs, suspecting your 'Update most Freescale packages' patch series > (using buildroot-2016.02-rc1 with your '[PATCH v3 0/2] gst1-imx: bump version to 0.12.0' > patches on top), but did not find time yet to investigate further... Does a basic gstreamer pipeline work? # gst-launch-1.0 videotestsrc ! imxeglvivsink If not there's no wonder qt5 doesn't like it. I haven't tried qt5 but I'm sure the gstreamer imxeglvivsink does work. In case you've enabled BR2_PACKAGE_KERNEL_MODULE_IMX_GPU_VIV, you might need to load the Galcore module manually in case you don't have eudev for instance: # insmod /lib/modules/3.14.28/extra/galcore.ko Regards, Gary
Hello Gary, > Gesendet: Dienstag, 16. Februar 2016 um 23:57 Uhr > Von: "Gary Bisson" <gary.bisson@boundarydevices.com> > An: "Peter Seiderer" <ps.report@gmx.net> > Cc: buildroot@busybox.net, "Thomas Petazzoni" <thomas.petazzoni@free-electrons.com> > Betreff: Re: [Buildroot] [PATCH v2 1/2] libimxvpuapi: add new package [snip] > > > But I had problems using the imxeglvivsink element and > > with qt5 eglfs, suspecting your 'Update most Freescale packages' patch series > > (using buildroot-2016.02-rc1 with your '[PATCH v3 0/2] gst1-imx: bump version to 0.12.0' > > patches on top), but did not find time yet to investigate further... > > Does a basic gstreamer pipeline work? > # gst-launch-1.0 videotestsrc ! imxeglvivsink > No: $ GST_DEBUG=*:3 gst-launch-1.0 videotestsrc ! imxeglvivsink Setting pipeline to PAUSED ... mxc_sdc_fb fb.20: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36 pixclock=148500000 Hz imx-ipuv3 2800000.ipu: try ipu internal clk imx-ipuv3 2800000.ipu: disp=0, pixel_clk=148500000 148500000 parent=148500000 div=1 0:00:00.229253000 245 0x9d1ee0 ERROR imxeglplatform_fb egl_platform_fb.c:72:gst_imx_egl_viv_sink_egl_platform_create: eglGetDisplay failed: bad alloc ERROR: Pipeline doesn't want to pause. Setting pipeline to NULL ... Freeing pipeline ... mxc_sdc_fb fb.20: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36 pixclock=148500000 Hz imx-ipuv3 2800000.ipu: try ipu internal clk imx-ipuv3 2800000.ipu: disp=0, pixel_clk=148500000 148500000 parent=148500000 div=1 Using Buildroot-2016-02-rc1 with https://patchwork.ozlabs.org/patch/577011/mbox/ https://patchwork.ozlabs.org/patch/577012/mbox/ and 'qt5tools: new package' patches on top with the following defconfig (based on the original nitrogen6x_defconfig config): BR2_arm=y BR2_cortex_a9=y BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_14=y BR2_TOOLCHAIN_BUILDROOT_GLIBC=y BR2_GLIBC_VERSION_2_22=y BR2_BINUTILS_VERSION_2_25_X=y BR2_TOOLCHAIN_BUILDROOT_CXX=y BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1" BR2_ROOTFS_POST_BUILD_SCRIPT="board/boundarydevices/nitrogen6x/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/boundarydevices/nitrogen6x/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux-imx6/tarball/f4c8395/linux-imx6-f4c8395.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="boundary" BR2_LINUX_KERNEL_ZIMAGE=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-nit6xlite imx6dl-nitrogen6_vm imx6dl-nitrogen6x imx6q-nitrogen6x imx6q-nitrogen6_max imx6q-sabrelite" BR2_LINUX_KERNEL_INSTALL_TARGET=y BR2_PACKAGE_GSTREAMER1=y BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_APP=y BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_AUDIOTESTSRC=y BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_VIDEOTESTSRC=y BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_ALSA=y BR2_PACKAGE_GST1_PLUGINS_GOOD=y BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_V4L2=y BR2_PACKAGE_GST1_PLUGINS_BAD=y BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_VIDEOPARSERS=y BR2_PACKAGE_GST1_PLUGINS_UGLY=y BR2_PACKAGE_GST1_IMX=y BR2_PACKAGE_BINUTILS=y BR2_PACKAGE_DEJAVU=y BR2_PACKAGE_QT5=y BR2_PACKAGE_QT5BASE_LICENSE_APPROVED=y BR2_PACKAGE_QT5BASE_SQLITE_SYSTEM=y BR2_PACKAGE_QT5BASE_OPENGL_LIB=y BR2_PACKAGE_QT5BASE_LINUXFB=y BR2_PACKAGE_QT5BASE_EGLFS=y BR2_PACKAGE_QT5BASE_DEFAULT_QPA="eglfs" BR2_PACKAGE_QT5BASE_FONTCONFIG=y BR2_PACKAGE_QT5BASE_GIF=y BR2_PACKAGE_QT5BASE_JPEG=y BR2_PACKAGE_QT5BASE_PNG=y BR2_PACKAGE_QT5GRAPHICALEFFECTS=y BR2_PACKAGE_QT5MULTIMEDIA=y BR2_PACKAGE_QT5QUICKCONTROLS=y BR2_PACKAGE_QT5SERIALPORT=y BR2_PACKAGE_QT5TOOLS=y BR2_PACKAGE_QT5TOOLS_LINGUIST_TOOLS=y BR2_PACKAGE_QT5WEBSOCKETS=y BR2_PACKAGE_QT5SCRIPT=y BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6Q=y BR2_PACKAGE_IMX_LIB=y BR2_PACKAGE_IMX_GPU_VIV=y BR2_PACKAGE_OPENSSL=y BR2_PACKAGE_LIBV4L=y BR2_PACKAGE_LIBV4L_UTILS=y BR2_PACKAGE_LIBIMXVPUAPI=y BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BOARDNAME="nitrogen6q" BR2_TARGET_UBOOT_CUSTOM_TARBALL=y BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="http://github.com/boundarydevices/u-boot-imx6/tarball/a4070a8/u-boot-a4070a8.tar.gz" BR2_TARGET_UBOOT_FORMAT_IMX=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y > If not there's no wonder qt5 doesn't like it. I haven't tried qt5 but > I'm sure the gstreamer imxeglvivsink does work. > My last working version was based on buildroot-2015.11.1 plus 'qt5: bump version to 5.5.1' and 'qt5tools: new package' on top... > In case you've enabled BR2_PACKAGE_KERNEL_MODULE_IMX_GPU_VIV, you > might need to load the Galcore module manually in case you don't have > eudev for instance: > # insmod /lib/modules/3.14.28/extra/galcore.ko No, working with boundarydevices linux-imx6-f4c8395 and original boundary config and there is a '/dev/galcore' entry on the target... Regards, Peter > > Regards, > Gary >
Hi Peter, On Wed, Feb 17, 2016 at 10:26 AM, Peter Seiderer <ps.report@gmx.net> wrote: > > Hello Gary, > > > Gesendet: Dienstag, 16. Februar 2016 um 23:57 Uhr > > Von: "Gary Bisson" <gary.bisson@boundarydevices.com> > > An: "Peter Seiderer" <ps.report@gmx.net> > > Cc: buildroot@busybox.net, "Thomas Petazzoni" <thomas.petazzoni@free-electrons.com> > > Betreff: Re: [Buildroot] [PATCH v2 1/2] libimxvpuapi: add new package > > [snip] > > > > > > But I had problems using the imxeglvivsink element and > > > with qt5 eglfs, suspecting your 'Update most Freescale packages' patch series > > > (using buildroot-2016.02-rc1 with your '[PATCH v3 0/2] gst1-imx: bump version to 0.12.0' > > > patches on top), but did not find time yet to investigate further... > > > > Does a basic gstreamer pipeline work? > > # gst-launch-1.0 videotestsrc ! imxeglvivsink > > > > No: > > $ GST_DEBUG=*:3 gst-launch-1.0 videotestsrc ! imxeglvivsink > Setting pipeline to PAUSED ... > mxc_sdc_fb fb.20: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36 pixclock=148500000 Hz > imx-ipuv3 2800000.ipu: try ipu internal clk > imx-ipuv3 2800000.ipu: disp=0, pixel_clk=148500000 148500000 parent=148500000 div=1 > 0:00:00.229253000 245 0x9d1ee0 ERROR imxeglplatform_fb egl_platform_fb.c:72:gst_imx_egl_viv_sink_egl_platform_create: eglGetDisplay failed: bad alloc > ERROR: Pipeline doesn't want to pause. > Setting pipeline to NULL ... > Freeing pipeline ... > mxc_sdc_fb fb.20: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36 pixclock=148500000 Hz > imx-ipuv3 2800000.ipu: try ipu internal clk > imx-ipuv3 2800000.ipu: disp=0, pixel_clk=148500000 148500000 parent=148500000 div=1 > > Using Buildroot-2016-02-rc1 with > https://patchwork.ozlabs.org/patch/577011/mbox/ > https://patchwork.ozlabs.org/patch/577012/mbox/ The setup I tried yesterday was: - Buildroot master commit f3fac0dcfdf (post 2016.02-rc1). - Plus the two patches you mention above > and 'qt5tools: new package' patches on top with the following defconfig (based on > the original nitrogen6x_defconfig config): > > BR2_arm=y > BR2_cortex_a9=y > BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_14=y > BR2_TOOLCHAIN_BUILDROOT_GLIBC=y > BR2_GLIBC_VERSION_2_22=y > BR2_BINUTILS_VERSION_2_25_X=y > BR2_TOOLCHAIN_BUILDROOT_CXX=y > BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y > BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1" > BR2_ROOTFS_POST_BUILD_SCRIPT="board/boundarydevices/nitrogen6x/post-build.sh" > BR2_ROOTFS_POST_IMAGE_SCRIPT="board/boundarydevices/nitrogen6x/post-image.sh" > BR2_LINUX_KERNEL=y > BR2_LINUX_KERNEL_CUSTOM_TARBALL=y > BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux-imx6/tarball/f4c8395/linux-imx6-f4c8395.tar.gz" > BR2_LINUX_KERNEL_DEFCONFIG="boundary" > BR2_LINUX_KERNEL_ZIMAGE=y > BR2_LINUX_KERNEL_DTS_SUPPORT=y > BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-nit6xlite imx6dl-nitrogen6_vm imx6dl-nitrogen6x imx6q-nitrogen6x imx6q-nitrogen6_max imx6q-sabrelite" > BR2_LINUX_KERNEL_INSTALL_TARGET=y > BR2_PACKAGE_GSTREAMER1=y > BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_APP=y > BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_AUDIOTESTSRC=y > BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_VIDEOTESTSRC=y > BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_ALSA=y > BR2_PACKAGE_GST1_PLUGINS_GOOD=y > BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_V4L2=y > BR2_PACKAGE_GST1_PLUGINS_BAD=y > BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_VIDEOPARSERS=y > BR2_PACKAGE_GST1_PLUGINS_UGLY=y > BR2_PACKAGE_GST1_IMX=y > BR2_PACKAGE_BINUTILS=y > BR2_PACKAGE_DEJAVU=y > BR2_PACKAGE_QT5=y > BR2_PACKAGE_QT5BASE_LICENSE_APPROVED=y > BR2_PACKAGE_QT5BASE_SQLITE_SYSTEM=y > BR2_PACKAGE_QT5BASE_OPENGL_LIB=y > BR2_PACKAGE_QT5BASE_LINUXFB=y > BR2_PACKAGE_QT5BASE_EGLFS=y > BR2_PACKAGE_QT5BASE_DEFAULT_QPA="eglfs" > BR2_PACKAGE_QT5BASE_FONTCONFIG=y > BR2_PACKAGE_QT5BASE_GIF=y > BR2_PACKAGE_QT5BASE_JPEG=y > BR2_PACKAGE_QT5BASE_PNG=y > BR2_PACKAGE_QT5GRAPHICALEFFECTS=y > BR2_PACKAGE_QT5MULTIMEDIA=y > BR2_PACKAGE_QT5QUICKCONTROLS=y > BR2_PACKAGE_QT5SERIALPORT=y > BR2_PACKAGE_QT5TOOLS=y > BR2_PACKAGE_QT5TOOLS_LINGUIST_TOOLS=y > BR2_PACKAGE_QT5WEBSOCKETS=y > BR2_PACKAGE_QT5SCRIPT=y > BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6Q=y > BR2_PACKAGE_IMX_LIB=y > BR2_PACKAGE_IMX_GPU_VIV=y > BR2_PACKAGE_OPENSSL=y > BR2_PACKAGE_LIBV4L=y > BR2_PACKAGE_LIBV4L_UTILS=y > BR2_PACKAGE_LIBIMXVPUAPI=y > BR2_TARGET_ROOTFS_EXT2=y > BR2_TARGET_ROOTFS_EXT2_4=y > BR2_TARGET_UBOOT=y > BR2_TARGET_UBOOT_BOARDNAME="nitrogen6q" > BR2_TARGET_UBOOT_CUSTOM_TARBALL=y > BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="http://github.com/boundarydevices/u-boot-imx6/tarball/a4070a8/u-boot-a4070a8.tar.gz" > BR2_TARGET_UBOOT_FORMAT_IMX=y > BR2_PACKAGE_HOST_GENIMAGE=y > BR2_PACKAGE_HOST_UBOOT_TOOLS=y > > > If not there's no wonder qt5 doesn't like it. I haven't tried qt5 but > > I'm sure the gstreamer imxeglvivsink does work. > > > > My last working version was based on buildroot-2015.11.1 plus 'qt5: bump version to 5.5.1' and > 'qt5tools: new package' on top... > > > In case you've enabled BR2_PACKAGE_KERNEL_MODULE_IMX_GPU_VIV, you > > might need to load the Galcore module manually in case you don't have > > eudev for instance: > > # insmod /lib/modules/3.14.28/extra/galcore.ko > > No, working with boundarydevices linux-imx6-f4c8395 and original boundary config > and there is a '/dev/galcore' entry on the target... Yes but that is the problem. Please try again with BR2_PACKAGE_KERNEL_MODULE_IMX_GPU_VIV. As you know, 3D graphics libraries match a specific kernel driver. Since it was an issue for many people, Vivante started to provide a kernel module so you can easily have the latest driver on an older kernel. Since I've updated the graphics to the latest (5.0.11 p7.1), the driver inside the 3.14.28 kernel is outdated so you need to use the Vivante kernel module. I didn't for the selection of the kernel module when the libraries are selected since some kernels (3.14.52) have the correct driver built-in. Sorry for the confusion but know that if you want to make sure the driver matches the user-space blobs, always select the Vivante kernel module as I'll make to always update both at the same time. Regards, Gary
Hello Gary, > Gesendet: Dienstag, 16. Februar 2016 um 23:57 Uhr > Von: "Gary Bisson" <gary.bisson@boundarydevices.com> > An: "Peter Seiderer" <ps.report@gmx.net> > Cc: buildroot@busybox.net, "Thomas Petazzoni" <thomas.petazzoni@free-electrons.com> > Betreff: Re: [Buildroot] [PATCH v2 1/2] libimxvpuapi: add new package > > Peter, All, > > On Tue, Feb 16, 2016 at 9:53 PM, Peter Seiderer <ps.report@gmx.net> wrote: > > > > Hello Gary, > > > > On Mon, 1 Feb 2016 22:55:58 +0100, Gary Bisson <gary.bisson@boundarydevices.com> wrote: > > > > > <snip> > > > +LIBIMXVPUAPI_VERSION = 0.10.1 > > > +LIBIMXVPUAPI_SITE = $(call github,Freescale,libimxvpuapi,$(LIBIMXVPUAPI_VERSION)) > > > +LIBIMXVPUAPI_LICENSE = LGPLv2.1+ > > > +LIBIMXVPUAPI_LICENSE_FILES = LICENSE > > > +LIBIMXVPUAPI_DEPENDENCIES = host-pkgconf host-python imx-vpu > > > +LIBIMXVPUAPI_INSTALL_STAGING = YES > > > + > > > +define LIBIMXVPUAPI_CONFIGURE_CMDS > > > + cd $(@D); \ > > > + $(TARGET_CONFIGURE_OPTS) $(HOST_DIR)/usr/bin/python2 ./waf configure \ > > > + --prefix=/usr > > > +endef > > > > On my x86_64 (OpenSUSE-13.2) host build the libs and libimxvpuapi.pc > > are installed into $(STAGING_DIR)/usr/lib64 and $(TARGET_DIR)/usr/lib64. > > > > To be usable by eg. gst1-imx the install path should be $(STAGING_DIR)/usr/lib > > and $(TARGET_DIR)/usr/lib. To achieve this I added '--libdir=/usr/lib' to > > overwrite the default '/usr/lib64': > > I'd like to understand why it behaves like this with your setup. I'm > using a 64-bit OS too (Debian Testing) but the libs go to /usr/lib as > expected. > > Could you pastebin the full log of libimxvpuapi build, your buildroot > configuration as well as you 'env'? > Build log attached (rm -r build/libimxvpuapi-0.10.1; make V=1 2>&1 | tee out_build_libimxvpuapi_orig.txt), same buildroot setup as in previous e-mail: out_build_libimxvpuapi_orig.txt $ cd build/libimxvpuapi-0.10.1/ $ /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/python2 ./waf configure --help ... --libdir=LIBDIR object code libraries [EXEC_PREFIX/lib64] ... $ env LESSKEY=/etc/lesskey.bin NNTPSERVER=news MANPATH=/usr/local/man:/usr/share/man HOSTNAME=XXXXXXX XKEYSYMDB=/usr/X11R6/lib/X11/XKeysymDB HOST=XXXXXXX TERM=rxvt-unicode-256color SHELL=/bin/bash PROFILEREAD=true HISTSIZE=1000 MORE=-sl JRE_HOME=/usr/lib64/jvm/java/jre USER=seiderer LS_COLORS= XNLSPATH=/usr/share/X11/nls QEMU_AUDIO_DRV=pa HOSTTYPE=x86_64 CONFIG_SITE=/usr/share/site/x86_64-unknown-linux-gnu FROM_HEADER= PAGER=less CSHEDIT=emacs XDG_CONFIG_DIRS=/etc/xdg LIBGL_DEBUG=quiet MINICOM=-c on MAIL=/var/mail/seiderer PATH=/opt/tools/bin:/home/seiderer/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games CPU=x86_64 JAVA_BINDIR=/usr/lib64/jvm/java/bin INPUTRC=/home/seiderer/.inputrc PWD=/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/libimxvpuapi-0.10.1 gopher_proxy= JAVA_HOME=/usr/lib64/jvm/java LANG=en_US.UTF-8 PYTHONSTARTUP=/etc/pythonstart SDK_HOME=/usr/lib64/jvm/java GPG_TTY=/dev/pts/3 AUDIODRIVER=pulseaudio QT_SYSTEM_DIR=/usr/share/desktop-data JDK_HOME=/usr/lib64/jvm/java SHLVL=1 HOME=/home/seiderer ALSA_CONFIG_PATH=/etc/alsa-pulse.conf SDL_AUDIODRIVER=pulse LESS_ADVANCED_PREPROCESSOR=no OSTYPE=linux LS_OPTIONS=-N --color=none -T 0 WINDOWMANAGER=/usr/bin/gnome G_FILENAME_ENCODING=@locale,UTF-8,ISO-8859-15,CP1252 LESS=-M -I -R MACHTYPE=x86_64-suse-linux LOGNAME=seiderer CVS_RSH=ssh XDG_DATA_DIRS=/usr/share SSH_CONNECTION=10.5.121.193 49159 10.5.123.15 22 LESSOPEN=lessopen.sh %s XDG_RUNTIME_DIR=/run/user/1000 DISPLAY=localhost:13.0 XAUTHLOCALHOSTNAME=DLxX9PSE02 NO_AT_BRIDGE=1 LESSCLOSE=lessclose.sh %s %s G_BROKEN_FILENAMES=1 JAVA_ROOT=/usr/lib64/jvm/java COLORTERM=1 BASH_FUNC_mc%%=() { . /usr/share/mc/mc-wrapper.sh } OLDPWD=/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001 _=/usr/bin/env Regards, Peter > > --- a/package/libimxvpuapi/libimxvpuapi.mk > > +++ b/package/libimxvpuapi/libimxvpuapi.mk > > @@ -14,7 +14,7 @@ LIBIMXVPUAPI_INSTALL_STAGING = YES > > define LIBIMXVPUAPI_CONFIGURE_CMDS > > cd $(@D); \ > > $(TARGET_CONFIGURE_OPTS) $(HOST_DIR)/usr/bin/python2 ./waf configure \ > > - --prefix=/usr > > + --prefix=/usr --libdir=/usr/lib > > endef > > > > define LIBIMXVPUAPI_BUILD_CMDS > > > > > > With this you can add my > > > > Tested-by: Peter Seiderer <ps.report@gmx.net> > > > > for '...! imxvpudec ! imxipuvideosink' > > Ok, I'll do that once I understand the difference which requires this > libdir argument. > > > But I had problems using the imxeglvivsink element and > > with qt5 eglfs, suspecting your 'Update most Freescale packages' patch series > > (using buildroot-2016.02-rc1 with your '[PATCH v3 0/2] gst1-imx: bump version to 0.12.0' > > patches on top), but did not find time yet to investigate further... > > Does a basic gstreamer pipeline work? > # gst-launch-1.0 videotestsrc ! imxeglvivsink > > If not there's no wonder qt5 doesn't like it. I haven't tried qt5 but > I'm sure the gstreamer imxeglvivsink does work. > > In case you've enabled BR2_PACKAGE_KERNEL_MODULE_IMX_GPU_VIV, you > might need to load the Galcore module manually in case you don't have > eudev for instance: > # insmod /lib/modules/3.14.28/extra/galcore.ko > > Regards, > Gary > umask 0022 && make -C /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1 O=/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/. /usr/bin/make -j1 O=/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/. HOSTCC="/usr/bin/gcc" HOSTCXX="/usr/bin/g++" silentoldconfig /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/support/scripts/mkmakefile /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1 /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/. GEN /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/./Makefile BR2_DEFCONFIG='' KCONFIG_AUTOCONFIG=/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/buildroot-config/auto.conf KCONFIG_AUTOHEADER=/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/buildroot-config/autoconf.h KCONFIG_TRISTATE=/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/buildroot-config/tristate.config BR2_CONFIG=/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/./.config BR2_EXTERNAL=support/dummy-external HOST_GCC_VERSION="4 8" SKIP_LEGACY= /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/buildroot-config/conf --silentoldconfig Config.in for p in https://github.com/Freescale/libimxvpuapi/archive/0.10.1/libimxvpuapi-0.10.1.tar.gz; do \ if test ! -e /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/dl/`basename $p` ; then \ echo "[7m>>> libimxvpuapi 0.10.1 Downloading[27m" ; \ break ; \ fi ; \ done if test -n "" ; then case "" in file) PATH="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/sbin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/sbin:/opt/tools/bin:/home/seiderer/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games" BR2_DL_DIR="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/dl" BUILD_DIR=/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build BR2_EXTERNAL=support/dummy-external support/download/dl-wrapper -b cp -o /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/dl/libimxvpuapi-0.10.1.tar.gz -H package/libimxvpuapi//libimxvpuapi.hash -- /libimxvpuapi-0.10.1.tar.gz && exit ;; scp) PATH="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/sbin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/sbin:/opt/tools/bin:/home/seiderer/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games" BR2_DL_DIR="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/dl" BUILD_DIR=/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build BR2_EXTERNAL=support/dummy-external support/download/dl-wrapper -b scp -o /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/dl/libimxvpuapi-0.10.1.tar.gz -H package/libimxvpuapi//libimxvpuapi.hash -- '/libimxvpuapi-0.10.1.tar.gz' && exit ;; *) PATH="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/sbin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/sbin:/opt/tools/bin:/home/seiderer/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games" BR2_DL_DIR="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/dl" BUILD_DIR=/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build BR2_EXTERNAL=support/dummy-external support/download/dl-wrapper -b wget -o /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/dl/libimxvpuapi-0.10.1.tar.gz -H package/libimxvpuapi//libimxvpuapi.hash -- '/libimxvpuapi-0.10.1.tar.gz' && exit ;; esac ; fi ; if test "" = "y" ; then exit 1 ; fi ; if test -n "https://github.com/Freescale/libimxvpuapi/archive/0.10.1/libimxvpuapi-0.10.1.tar.gz" ; then case "https" in git) PATH="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/sbin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/sbin:/opt/tools/bin:/home/seiderer/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games" BR2_DL_DIR="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/dl" BUILD_DIR=/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build BR2_EXTERNAL=support/dummy-external support/download/dl-wrapper -b git -o /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/dl/libimxvpuapi-0.10.1.tar.gz -- https://github.com/Freescale/libimxvpuapi/archive/0.10.1 0.10.1 libimxvpuapi-0.10.1 && exit ;; svn) PATH="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/sbin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/sbin:/opt/tools/bin:/home/seiderer/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games" BR2_DL_DIR="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/dl" BUILD_DIR=/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build BR2_EXTERNAL=support/dummy-external support/download/dl-wrapper -b svn -o /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/dl/libimxvpuapi-0.10.1.tar.gz -- https://github.com/Freescale/libimxvpuapi/archive/0.10.1 0.10.1 libimxvpuapi-0.10.1 && exit ;; cvs) PATH="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/sbin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/sbin:/opt/tools/bin:/home/seiderer/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games" BR2_DL_DIR="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/dl" BUILD_DIR=/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build BR2_EXTERNAL=support/dummy-external support/download/dl-wrapper -b cvs -o /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/dl/libimxvpuapi-0.10.1.tar.gz -- github.com/Freescale/libimxvpuapi/archive/0.10.1 0.10.1 libimxvpuapi libimxvpuapi-0.10.1 && exit ;; bzr) PATH="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/sbin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/sbin:/opt/tools/bin:/home/seiderer/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games" BR2_DL_DIR="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/dl" BUILD_DIR=/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build BR2_EXTERNAL=support/dummy-external support/download/dl-wrapper -b bzr -o /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/dl/libimxvpuapi-0.10.1.tar.gz -- https://github.com/Freescale/libimxvpuapi/archive/0.10.1 0.10.1 libimxvpuapi-0.10.1 && exit ;; file) PATH="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/sbin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/sbin:/opt/tools/bin:/home/seiderer/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games" BR2_DL_DIR="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/dl" BUILD_DIR=/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build BR2_EXTERNAL=support/dummy-external support/download/dl-wrapper -b cp -o /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/dl/libimxvpuapi-0.10.1.tar.gz -H package/libimxvpuapi//libimxvpuapi.hash -- github.com/Freescale/libimxvpuapi/archive/0.10.1/libimxvpuapi-0.10.1.tar.gz && exit ;; scp) PATH="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/sbin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/sbin:/opt/tools/bin:/home/seiderer/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games" BR2_DL_DIR="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/dl" BUILD_DIR=/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build BR2_EXTERNAL=support/dummy-external support/download/dl-wrapper -b scp -o /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/dl/libimxvpuapi-0.10.1.tar.gz -H package/libimxvpuapi//libimxvpuapi.hash -- 'github.com/Freescale/libimxvpuapi/archive/0.10.1/libimxvpuapi-0.10.1.tar.gz' && exit ;; hg) PATH="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/sbin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/sbin:/opt/tools/bin:/home/seiderer/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games" BR2_DL_DIR="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/dl" BUILD_DIR=/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build BR2_EXTERNAL=support/dummy-external support/download/dl-wrapper -b hg -o /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/dl/libimxvpuapi-0.10.1.tar.gz -- https://github.com/Freescale/libimxvpuapi/archive/0.10.1 0.10.1 libimxvpuapi-0.10.1 && exit ;; *) PATH="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/sbin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/sbin:/opt/tools/bin:/home/seiderer/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games" BR2_DL_DIR="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/dl" BUILD_DIR=/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build BR2_EXTERNAL=support/dummy-external support/download/dl-wrapper -b wget -o /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/dl/libimxvpuapi-0.10.1.tar.gz -H package/libimxvpuapi//libimxvpuapi.hash -- 'https://github.com/Freescale/libimxvpuapi/archive/0.10.1/libimxvpuapi-0.10.1.tar.gz' && exit ;; esac ; fi ; if test -n "http://sources.buildroot.net" ; then PATH="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/sbin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/sbin:/opt/tools/bin:/home/seiderer/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games" BR2_DL_DIR="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/dl" BUILD_DIR=/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build BR2_EXTERNAL=support/dummy-external support/download/dl-wrapper -b wget -o /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/dl/libimxvpuapi-0.10.1.tar.gz -H package/libimxvpuapi//libimxvpuapi.hash -- 'http://sources.buildroot.net/libimxvpuapi-0.10.1.tar.gz' && exit ; fi ; exit 1 libimxvpuapi-0.10.1.tar.gz: OK (sha256: 8d7aeed88c06fda44318cef9565ae47b86461bd309908b1103a7974ed0822a8d) mkdir -p /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/libimxvpuapi-0.10.1 touch /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/libimxvpuapi-0.10.1/.stamp_downloaded [7m>>> libimxvpuapi 0.10.1 Extracting[27m mkdir -p /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/libimxvpuapi-0.10.1 gzip -d -c /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/dl/libimxvpuapi-0.10.1.tar.gz | tar --strip-components=1 -C /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/libimxvpuapi-0.10.1 -xf - chmod -R +rw /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/libimxvpuapi-0.10.1 touch /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/libimxvpuapi-0.10.1/.stamp_extracted [7m>>> libimxvpuapi 0.10.1 Patching[27m ( \ for D in package/libimxvpuapi/ ; do \ if test -d ${D}; then \ if test -d ${D}/0.10.1; then \ support/scripts/apply-patches.sh /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/libimxvpuapi-0.10.1 ${D}/0.10.1 \*.patch \*.patch.arm || exit 1; \ else \ support/scripts/apply-patches.sh /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/libimxvpuapi-0.10.1 ${D} \*.patch \*.patch.arm || exit 1; \ fi; \ fi; \ done; \ ) touch /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/libimxvpuapi-0.10.1/.stamp_patched [7m>>> libimxvpuapi 0.10.1 Configuring[27m cd /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/libimxvpuapi-0.10.1; PATH="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/sbin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/sbin:/opt/tools/bin:/home/seiderer/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games" AR="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/arm-buildroot-linux-gnueabi-ar" AS="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/arm-buildroot-linux-gnueabi-as" LD="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/arm-buildroot-linux-gnueabi-ld" NM="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/arm-buildroot-linux-gnueabi-nm" CC="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/arm-buildroot-linux-gnueabi-gcc" GCC="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/arm-buildroot-linux-gnueabi-gcc" CPP="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/arm-buildroot-linux-gnueabi-cpp" CXX="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/arm-buildroot-linux-gnueabi-g++" FC="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/arm-buildroot-linux-gnueabi-gfortran" RANLIB="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/arm-buildroot-linux-gnueabi-ranlib" READELF="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/arm-buildroot-linux-gnueabi-readelf" STRIP="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/arm-buildroot-linux-gnueabi-strip" OBJCOPY="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/arm-buildroot-linux-gnueabi-objcopy" OBJDUMP="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/arm-buildroot-linux-gnueabi-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/include" CFLAGS_FOR_BUILD="-O2 -I/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/include" LDFLAGS_FOR_BUILD="-L/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/lib -L/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/lib -Wl,-rpath,/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/arm-buildroot-linux-gnueabi-as" DEFAULT_LINKER="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/arm-buildroot-linux-gnueabi-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " LDFLAGS="" FCFLAGS="" PKG_CONFIG="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/pkg-config" STAGING_DIR="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/arm-buildroot-linux-gnueabi/sysroot" INTLTOOL_PERL=/usr/bin/perl /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/python2 ./waf configure --prefix=/usr Setting top to : /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/libimxvpuapi-0.10.1 Setting out to : /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/libimxvpuapi-0.10.1/build Checking for 'gcc' (C compiler) : /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/arm-buildroot-linux-gnueabi-gcc Testing compiler flags -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os Checking if building with these flags works : yes Checking for compiler switch -O2 : yes Checking for compiler switch -DPIC : yes Checking for compiler switch -fPIC : yes Checking for compiler switch -pedantic : yes Checking for compiler switch -std=c99 : yes Checking for compiler switch -Wall : yes Checking for compiler switch -Wextra : yes using the vpulib backend Checking for library vpu : yes checking if ENC_ENABLE_SOF_STUFF exists : yes 'configure' finished successfully (1.536s) touch /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/libimxvpuapi-0.10.1/.stamp_configured [7m>>> libimxvpuapi 0.10.1 Building[27m cd /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/libimxvpuapi-0.10.1; /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/python2 ./waf build -j 13 Waf: Entering directory `/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/libimxvpuapi-0.10.1/build' [ 1/17] Compiling imxvpuapi/imxvpuapi.c [ 2/17] Compiling imxvpuapi/imxvpuapi_jpeg.c [ 3/17] Compiling imxvpuapi/imxvpuapi_parse_jpeg.c [ 4/17] Compiling imxvpuapi/imxvpuapi_vpulib.c [ 5/17] Compiling example/main.c [ 6/17] Compiling example/h264_utils.c [ 7/17] Compiling libimxvpuapi.pc.in [ 8/17] Compiling example/decode-example.c [ 9/17] Compiling example/encode-example.c [10/17] Compiling example/jpeg-dec-example.c [11/17] Compiling example/jpeg-enc-example.c [12/17] Linking build/libimxvpuapi.so [13/17] Linking build/example/decode-example [15/17] Linking build/example/encode-example [15/17] Linking build/example/jpeg-dec-example [16/17] Linking build/example/jpeg-enc-example [17/17] Symlinking build/libimxvpuapi.so Waf: Leaving directory `/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/libimxvpuapi-0.10.1/build' 'build' finished successfully (0.860s) touch /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/libimxvpuapi-0.10.1/.stamp_built [7m>>> libimxvpuapi 0.10.1 Installing to staging directory[27m cd /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/libimxvpuapi-0.10.1; /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/python2 ./waf --destdir=/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/arm-buildroot-linux-gnueabi/sysroot install Waf: Entering directory `/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/libimxvpuapi-0.10.1/build' - install /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/arm-buildroot-linux-gnueabi/sysroot/usr/include/imxvpuapi/imxvpuapi.h (from imxvpuapi/imxvpuapi.h) - install /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/arm-buildroot-linux-gnueabi/sysroot/usr/include/imxvpuapi/imxvpuapi_jpeg.h (from imxvpuapi/imxvpuapi_jpeg.h) + install /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/arm-buildroot-linux-gnueabi/sysroot/usr/lib64/libimxvpuapi.so.0.10.1 (from build/libimxvpuapi.so) - symlink /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/arm-buildroot-linux-gnueabi/sysroot/usr/lib64/libimxvpuapi.so (to libimxvpuapi.so.0.10.1) - symlink /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/arm-buildroot-linux-gnueabi/sysroot/usr/lib64/libimxvpuapi.so.0 (to libimxvpuapi.so.0.10.1) + install /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/arm-buildroot-linux-gnueabi/sysroot/usr/lib64/pkgconfig/libimxvpuapi.pc (from build/libimxvpuapi.pc) Waf: Leaving directory `/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/libimxvpuapi-0.10.1/build' 'install' finished successfully (0.023s) if test -n "" ; then \ echo "[7m>>> libimxvpuapi 0.10.1 Fixing package configuration files[27m" ;\ /usr/bin/sed -i -e "s,/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001,@BASE_DIR@,g" \ -e "s,/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/arm-buildroot-linux-gnueabi/sysroot,@STAGING_DIR@,g" \ -e "s,^\(exec_\)\?prefix=.*,\1prefix=@STAGING_DIR@/usr,g" \ -e "s,-I/usr/,-I@STAGING_DIR@/usr/,g" \ -e "s,-L/usr/,-L@STAGING_DIR@/usr/,g" \ -e "s,@STAGING_DIR@,/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/arm-buildroot-linux-gnueabi/sysroot,g" \ -e "s,@BASE_DIR@,/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001,g" \ ;\ fi [7m>>> libimxvpuapi 0.10.1 Fixing libtool files[27m find /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/arm-buildroot-linux-gnueabi/sysroot/usr/lib* -name "*.la" | xargs --no-run-if-empty \ /usr/bin/sed -i -e "s:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001:@BASE_DIR@:g" \ -e "s:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/arm-buildroot-linux-gnueabi/sysroot:@STAGING_DIR@:g" \ \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ \ -e "s:@STAGING_DIR@:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/arm-buildroot-linux-gnueabi/sysroot:g" \ -e "s:@BASE_DIR@:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001:g" touch /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/libimxvpuapi-0.10.1/.stamp_staging_installed [7m>>> libimxvpuapi 0.10.1 Installing to target[27m cd /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/libimxvpuapi-0.10.1; /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/python2 ./waf --destdir=/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target install Waf: Entering directory `/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/libimxvpuapi-0.10.1/build' + install /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/usr/include/imxvpuapi/imxvpuapi.h (from imxvpuapi/imxvpuapi.h) - symlink /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/usr/lib64/libimxvpuapi.so (to libimxvpuapi.so.0.10.1) - symlink /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/usr/lib64/libimxvpuapi.so.0 (to libimxvpuapi.so.0.10.1) + install /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/usr/include/imxvpuapi/imxvpuapi_jpeg.h (from imxvpuapi/imxvpuapi_jpeg.h) + install /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/usr/lib64/libimxvpuapi.so.0.10.1 (from build/libimxvpuapi.so) + install /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/usr/lib64/pkgconfig/libimxvpuapi.pc (from build/libimxvpuapi.pc) Waf: Leaving directory `/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/libimxvpuapi-0.10.1/build' 'install' finished successfully (0.025s) if test -n "" ; then \ rm -f -f ; \ fi touch /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/libimxvpuapi-0.10.1/.stamp_target_installed [7m>>> Finalizing target directory[27m if [ ! -f "/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/etc/nsswitch.conf" ]; then /usr/bin/install -D -m 0644 package/glibc/nsswitch.conf /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/etc/nsswitch.conf ; fi rm -rf /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/usr/lib/luarocks mkdir -p /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/etc echo "buildroot" > /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/etc/hostname /usr/bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/etc/hosts mkdir -p /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/etc echo "Welcome to Buildroot" > /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/etc/issue mkdir -p /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/etc/network/ ( echo "# interface file auto-generated by buildroot"; echo ; echo "auto lo"; echo "iface lo inet loopback"; ) > /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/etc/network/interfaces /usr/bin/sed -i -e s,^root:[^:]*:,root::, /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/etc/shadow ln -sf busybox /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/bin/sh /usr/bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~ttymxc1::respawn:/sbin/getty -L ttymxc1 0 vt100 #~' /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/etc/inittab /usr/bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/etc/inittab rm -rf /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/usr/include /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/usr/share/aclocal \ /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/usr/lib/pkgconfig /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/usr/share/pkgconfig \ /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/usr/lib/cmake /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/usr/share/cmake find /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/lib /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/usr/lib /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/usr/libexec \ \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f rm -rf /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/usr/share/gdb rm -rf /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/usr/share/bash-completion rm -rf /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/usr/share/zsh rm -rf /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/usr/man /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/usr/share/man rm -rf /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/usr/info /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/usr/share/info rm -rf /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/usr/doc /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/usr/share/doc rm -rf /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/usr/share/gtk-doc rmdir /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/usr/share 2>/dev/null Makefile:604: recipe for target 'target-finalize' failed make[1]: [target-finalize] Error 1 (ignored) find /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/arm-buildroot-linux-gnueabi-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true if test -d /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/lib/modules; then \ find /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/lib/modules -type f -name '*.ko' -print0 | \ xargs -0 -r /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/arm-buildroot-linux-gnueabi-strip --remove-section=.comment --remove-section=.note --strip-unneeded; fi find /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/lib -type f -name 'libpthread*.so*' | \ xargs -r /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/arm-buildroot-linux-gnueabi-strip --remove-section=.comment --remove-section=.note --strip-debug find /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/lib -type f -name 'ld-*.so*' | \ xargs -r /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/arm-buildroot-linux-gnueabi-strip --remove-section=.comment --remove-section=.note --strip-debug test -f /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2016.02-rc1-g0c52369-dirty"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2016.02-rc1"; \ echo "PRETTY_NAME=\"Buildroot 2016.02-rc1\"" \ ) > /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/etc/os-release [7m>>> Executing post-build script board/boundarydevices/nitrogen6x/post-build.sh[27m Image Name: boot script Created: Wed Feb 17 10:29:56 2016 Image Type: ARM Linux Script (uncompressed) Data Size: 2920 Bytes = 2.85 kB = 0.00 MB Load Address: 00000000 Entry Point: 00000000 Contents: Image 0: 2912 Bytes = 2.84 kB = 0.00 MB Image Name: upgrade script Created: Wed Feb 17 10:29:56 2016 Image Type: ARM Linux Script (uncompressed) Data Size: 1495 Bytes = 1.46 kB = 0.00 MB Load Address: 00000000 Entry Point: 00000000 Contents: Image 0: 1487 Bytes = 1.45 kB = 0.00 MB [7m>>> Generating root filesystem image rootfs.ext2[27m rm -f /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_fakeroot.fs rm -f /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM rm -f /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_users_table.txt echo "set -e" >> /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_fakeroot.fs echo "chown -h -R 0:0 /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target" >> /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_fakeroot.fs printf ' - - input -1 * - - - Input device group\n' >> /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_users_table.txt PATH="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/sbin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/sbin:/opt/tools/bin:/home/seiderer/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games" /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/support/scripts/mkusers /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_users_table.txt /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target >> /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_fakeroot.fs cat system/device_table.txt > /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_device_table.txt printf ' /bin/busybox f 4755 0 0 - - - - -\n /dev/console c 622 0 0 5 1 - - -\n' >> /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_device_table.txt echo "/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/makedevs -d /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_device_table.txt /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target" >> /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_fakeroot.fs echo " PATH="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/sbin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/sbin:/opt/tools/bin:/home/seiderer/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games" mke2img -d /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target -G 4 -R 1 -B 0 -I 0 -o /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/images/rootfs.ext2" >> /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_fakeroot.fs chmod a+x /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_fakeroot.fs PATH="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/sbin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/sbin:/opt/tools/bin:/home/seiderer/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games" /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/fakeroot -- /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_fakeroot.fs rootdir=/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target table='/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_device_table.txt' tune2fs 1.42.13 (17-May-2015) tune2fs 1.42.13 (17-May-2015) Please run e2fsck on the filesystem. Creating journal inode: done This filesystem will be automatically checked every 20 mounts or 0 days, whichever comes first. Use tune2fs -c or -i to override. mke2img: e2fsck was successfully run on '/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/images/rootfs.ext2' (ext4) tune2fs 1.42.13 (17-May-2015) Setting maximal mount count to -1 Setting interval between checks to 0 seconds /usr/bin/install -m 0644 support/misc/target-dir-warning.txt /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM ln -sf rootfs.ext2 /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/images/rootfs.ext4 [7m>>> Generating root filesystem image rootfs.tar[27m rm -f /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_fakeroot.fs rm -f /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM rm -f /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_users_table.txt echo "set -e" >> /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_fakeroot.fs echo "chown -h -R 0:0 /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target" >> /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_fakeroot.fs printf ' - - input -1 * - - - Input device group\n' >> /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_users_table.txt PATH="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/sbin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/sbin:/opt/tools/bin:/home/seiderer/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games" /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/buildroot-2016.02-rc1/support/scripts/mkusers /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_users_table.txt /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target >> /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_fakeroot.fs cat system/device_table.txt > /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_device_table.txt printf ' /bin/busybox f 4755 0 0 - - - - -\n /dev/console c 622 0 0 5 1 - - -\n' >> /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_device_table.txt echo "/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/makedevs -d /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_device_table.txt /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target" >> /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_fakeroot.fs echo " tar -cf /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/images/rootfs.tar --numeric-owner -C /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target ." >> /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_fakeroot.fs chmod a+x /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_fakeroot.fs PATH="/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/sbin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin:/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/sbin:/opt/tools/bin:/home/seiderer/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games" /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/fakeroot -- /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_fakeroot.fs rootdir=/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target table='/home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/build/_device_table.txt' /usr/bin/install -m 0644 support/misc/target-dir-warning.txt /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/target/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM [7m>>> Executing post-image script board/boundarydevices/nitrogen6x/post-image.sh[27m hdimage(sdcard.img): adding partition 'u-boot' from 'u-boot.imx' ... hdimage(sdcard.img): adding partition 'rootfs' (in MBR) from 'rootfs.ext4' ... hdimage(sdcard.img): writing MBR
Hi Peter, On Wed, Feb 17, 2016 at 10:45 AM, Peter Seiderer <ps.report@gmx.net> wrote: > <snip> >> Could you pastebin the full log of libimxvpuapi build, your buildroot >> configuration as well as you 'env'? >> > > Build log attached (rm -r build/libimxvpuapi-0.10.1; make V=1 2>&1 | tee out_build_libimxvpuapi_orig.txt), > same buildroot setup as in previous e-mail: out_build_libimxvpuapi_orig.txt > > $ cd build/libimxvpuapi-0.10.1/ > $ /home/seiderer/Work/BD_Nitrogen6x/Buildroot-2016-02/build_2016_02_001/host/usr/bin/python2 ./waf configure --help > ... > --libdir=LIBDIR object code libraries [EXEC_PREFIX/lib64] Thanks for your quick reply. Indeed the same command on my platform gives me: --libdir=LIBDIR object code libraries [EXEC_PREFIX/lib] Plus your env seems just fine. Digging into it I've found my the difference is between our system, multiarch is enabled on mine. In the Configure.py script the libdir is initialized as follows: if not env.LIBDIR: if Options.options.libdir: env.LIBDIR=Utils.sane_path(Options.options.libdir) else: env.LIBDIR=Utils.subst_vars('${PREFIX}/lib%s'%Utils.lib64(),env) And Utils.py tells us where the 64 comes from: def lib64(): if os.sep=='/': if platform.architecture()[0]=='64bit': if os.path.exists('/usr/lib64')and not os.path.exists('/usr/lib32'): return'64' return'' So I'll submit the v3 today and cc you. Thanks for reporting and fixing the issue! Regards, Gary
Hello Gary, > Gesendet: Mittwoch, 17. Februar 2016 um 10:37 Uhr > Von: "Gary Bisson" <gary.bisson@boundarydevices.com> > An: "Peter Seiderer" <ps.report@gmx.net> > Cc: buildroot@busybox.net, "Thomas Petazzoni" <thomas.petazzoni@free-electrons.com> > Betreff: Re: [Buildroot] [PATCH v2 1/2] libimxvpuapi: add new package > > Hi Peter, > > On Wed, Feb 17, 2016 at 10:26 AM, Peter Seiderer <ps.report@gmx.net> wrote: > > > > Hello Gary, > > > > > Gesendet: Dienstag, 16. Februar 2016 um 23:57 Uhr > > > Von: "Gary Bisson" <gary.bisson@boundarydevices.com> > > > An: "Peter Seiderer" <ps.report@gmx.net> > > > Cc: buildroot@busybox.net, "Thomas Petazzoni" <thomas.petazzoni@free-electrons.com> > > > Betreff: Re: [Buildroot] [PATCH v2 1/2] libimxvpuapi: add new package > > > > [snip] > > > > > > > > > But I had problems using the imxeglvivsink element and > > > > with qt5 eglfs, suspecting your 'Update most Freescale packages' patch series > > > > (using buildroot-2016.02-rc1 with your '[PATCH v3 0/2] gst1-imx: bump version to 0.12.0' > > > > patches on top), but did not find time yet to investigate further... > > > > > > Does a basic gstreamer pipeline work? > > > # gst-launch-1.0 videotestsrc ! imxeglvivsink > > > > > > > No: > > > > $ GST_DEBUG=*:3 gst-launch-1.0 videotestsrc ! imxeglvivsink > > Setting pipeline to PAUSED ... > > mxc_sdc_fb fb.20: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36 pixclock=148500000 Hz > > imx-ipuv3 2800000.ipu: try ipu internal clk > > imx-ipuv3 2800000.ipu: disp=0, pixel_clk=148500000 148500000 parent=148500000 div=1 > > 0:00:00.229253000 245 0x9d1ee0 ERROR imxeglplatform_fb egl_platform_fb.c:72:gst_imx_egl_viv_sink_egl_platform_create: eglGetDisplay failed: bad alloc > > ERROR: Pipeline doesn't want to pause. > > Setting pipeline to NULL ... > > Freeing pipeline ... > > mxc_sdc_fb fb.20: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36 pixclock=148500000 Hz > > imx-ipuv3 2800000.ipu: try ipu internal clk > > imx-ipuv3 2800000.ipu: disp=0, pixel_clk=148500000 148500000 parent=148500000 div=1 > > > > Using Buildroot-2016-02-rc1 with > > https://patchwork.ozlabs.org/patch/577011/mbox/ > > https://patchwork.ozlabs.org/patch/577012/mbox/ > > The setup I tried yesterday was: > - Buildroot master commit f3fac0dcfdf (post 2016.02-rc1). > - Plus the two patches you mention above > > > and 'qt5tools: new package' patches on top with the following defconfig (based on > > the original nitrogen6x_defconfig config): > > > > BR2_arm=y > > BR2_cortex_a9=y > > BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_14=y > > BR2_TOOLCHAIN_BUILDROOT_GLIBC=y > > BR2_GLIBC_VERSION_2_22=y > > BR2_BINUTILS_VERSION_2_25_X=y > > BR2_TOOLCHAIN_BUILDROOT_CXX=y > > BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y > > BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1" > > BR2_ROOTFS_POST_BUILD_SCRIPT="board/boundarydevices/nitrogen6x/post-build.sh" > > BR2_ROOTFS_POST_IMAGE_SCRIPT="board/boundarydevices/nitrogen6x/post-image.sh" > > BR2_LINUX_KERNEL=y > > BR2_LINUX_KERNEL_CUSTOM_TARBALL=y > > BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux-imx6/tarball/f4c8395/linux-imx6-f4c8395.tar.gz" > > BR2_LINUX_KERNEL_DEFCONFIG="boundary" > > BR2_LINUX_KERNEL_ZIMAGE=y > > BR2_LINUX_KERNEL_DTS_SUPPORT=y > > BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-nit6xlite imx6dl-nitrogen6_vm imx6dl-nitrogen6x imx6q-nitrogen6x imx6q-nitrogen6_max imx6q-sabrelite" > > BR2_LINUX_KERNEL_INSTALL_TARGET=y > > BR2_PACKAGE_GSTREAMER1=y > > BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_APP=y > > BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_AUDIOTESTSRC=y > > BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_VIDEOTESTSRC=y > > BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_ALSA=y > > BR2_PACKAGE_GST1_PLUGINS_GOOD=y > > BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_V4L2=y > > BR2_PACKAGE_GST1_PLUGINS_BAD=y > > BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_VIDEOPARSERS=y > > BR2_PACKAGE_GST1_PLUGINS_UGLY=y > > BR2_PACKAGE_GST1_IMX=y > > BR2_PACKAGE_BINUTILS=y > > BR2_PACKAGE_DEJAVU=y > > BR2_PACKAGE_QT5=y > > BR2_PACKAGE_QT5BASE_LICENSE_APPROVED=y > > BR2_PACKAGE_QT5BASE_SQLITE_SYSTEM=y > > BR2_PACKAGE_QT5BASE_OPENGL_LIB=y > > BR2_PACKAGE_QT5BASE_LINUXFB=y > > BR2_PACKAGE_QT5BASE_EGLFS=y > > BR2_PACKAGE_QT5BASE_DEFAULT_QPA="eglfs" > > BR2_PACKAGE_QT5BASE_FONTCONFIG=y > > BR2_PACKAGE_QT5BASE_GIF=y > > BR2_PACKAGE_QT5BASE_JPEG=y > > BR2_PACKAGE_QT5BASE_PNG=y > > BR2_PACKAGE_QT5GRAPHICALEFFECTS=y > > BR2_PACKAGE_QT5MULTIMEDIA=y > > BR2_PACKAGE_QT5QUICKCONTROLS=y > > BR2_PACKAGE_QT5SERIALPORT=y > > BR2_PACKAGE_QT5TOOLS=y > > BR2_PACKAGE_QT5TOOLS_LINGUIST_TOOLS=y > > BR2_PACKAGE_QT5WEBSOCKETS=y > > BR2_PACKAGE_QT5SCRIPT=y > > BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6Q=y > > BR2_PACKAGE_IMX_LIB=y > > BR2_PACKAGE_IMX_GPU_VIV=y > > BR2_PACKAGE_OPENSSL=y > > BR2_PACKAGE_LIBV4L=y > > BR2_PACKAGE_LIBV4L_UTILS=y > > BR2_PACKAGE_LIBIMXVPUAPI=y > > BR2_TARGET_ROOTFS_EXT2=y > > BR2_TARGET_ROOTFS_EXT2_4=y > > BR2_TARGET_UBOOT=y > > BR2_TARGET_UBOOT_BOARDNAME="nitrogen6q" > > BR2_TARGET_UBOOT_CUSTOM_TARBALL=y > > BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="http://github.com/boundarydevices/u-boot-imx6/tarball/a4070a8/u-boot-a4070a8.tar.gz" > > BR2_TARGET_UBOOT_FORMAT_IMX=y > > BR2_PACKAGE_HOST_GENIMAGE=y > > BR2_PACKAGE_HOST_UBOOT_TOOLS=y > > > > > If not there's no wonder qt5 doesn't like it. I haven't tried qt5 but > > > I'm sure the gstreamer imxeglvivsink does work. > > > > > > > My last working version was based on buildroot-2015.11.1 plus 'qt5: bump version to 5.5.1' and > > 'qt5tools: new package' on top... > > > > > In case you've enabled BR2_PACKAGE_KERNEL_MODULE_IMX_GPU_VIV, you > > > might need to load the Galcore module manually in case you don't have > > > eudev for instance: > > > # insmod /lib/modules/3.14.28/extra/galcore.ko > > > > No, working with boundarydevices linux-imx6-f4c8395 and original boundary config > > and there is a '/dev/galcore' entry on the target... > > Yes but that is the problem. Please try again with > BR2_PACKAGE_KERNEL_MODULE_IMX_GPU_VIV. > > As you know, 3D graphics libraries match a specific kernel driver. > Since it was an issue for many people, Vivante started to provide a > kernel module so you can easily have the latest driver on an older > kernel. > > Since I've updated the graphics to the latest (5.0.11 p7.1), the > driver inside the 3.14.28 kernel is outdated so you need to use the > Vivante kernel module. I didn't for the selection of the kernel module > when the libraries are selected since some kernels (3.14.52) have the > correct driver built-in. > Got it now, the missing part was: BR2_PACKAGE_KERNEL_MODULE_IMX_GPU_VIV=y Qt5 eglfs and gstreamer imxeglvivsink are working now... > Sorry for the confusion but know that if you want to make sure the > driver matches the user-space blobs, always select the Vivante kernel > module as I'll make to always update both at the same time. > Maybe a little hint in board/boundarydevices/nitrogen6x/readme.txt would be useful? Many thanks for your support... Regards, Peter > Regards, > Gary > _______________________________________________ > buildroot mailing list > buildroot@busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot >
Hi Peter, On Wed, Feb 17, 2016 at 1:30 PM, Peter Seiderer <ps.report@gmx.net> wrote: > Hello Gary, > >> <snip> >> > No, working with boundarydevices linux-imx6-f4c8395 and original boundary config >> > and there is a '/dev/galcore' entry on the target... >> >> Yes but that is the problem. Please try again with >> BR2_PACKAGE_KERNEL_MODULE_IMX_GPU_VIV. >> >> As you know, 3D graphics libraries match a specific kernel driver. >> Since it was an issue for many people, Vivante started to provide a >> kernel module so you can easily have the latest driver on an older >> kernel. >> >> Since I've updated the graphics to the latest (5.0.11 p7.1), the >> driver inside the 3.14.28 kernel is outdated so you need to use the >> Vivante kernel module. I didn't for the selection of the kernel module >> when the libraries are selected since some kernels (3.14.52) have the >> correct driver built-in. >> > > Got it now, the missing part was: > > BR2_PACKAGE_KERNEL_MODULE_IMX_GPU_VIV=y > > Qt5 eglfs and gstreamer imxeglvivsink are working now... Good to hear! >> Sorry for the confusion but know that if you want to make sure the >> driver matches the user-space blobs, always select the Vivante kernel >> module as I'll make to always update both at the same time. >> > > Maybe a little hint in board/boundarydevices/nitrogen6x/readme.txt would be useful? Well it is not Nitrogen6x-specific, it applies to all i.MX6 platforms so I'm not sure where would be the best place to give this info apart from the help text. Thomas, any idea on this? Yocto is forcing the use of the Vivante kernel module, maybe we should do the same but I'm not fond of this approach. > Many thanks for your support... No problem. Thanks for your valuable feedback! Regards, Gary
Hello, On Wed, 17 Feb 2016 13:42:44 +0100, Gary Bisson wrote: > Well it is not Nitrogen6x-specific, it applies to all i.MX6 platforms > so I'm not sure where would be the best place to give this info apart > from the help text. Thomas, any idea on this? I am not sure where to store such platform-specific information. A new section in the Buildroot manual, perhaps? Thomas
On 17-02-16 13:42, Gary Bisson wrote: > Hi Peter, > > On Wed, Feb 17, 2016 at 1:30 PM, Peter Seiderer <ps.report@gmx.net> wrote: >> Hello Gary, >> >>> <snip> >>>> No, working with boundarydevices linux-imx6-f4c8395 and original boundary config >>>> and there is a '/dev/galcore' entry on the target... >>> >>> Yes but that is the problem. Please try again with >>> BR2_PACKAGE_KERNEL_MODULE_IMX_GPU_VIV. >>> >>> As you know, 3D graphics libraries match a specific kernel driver. >>> Since it was an issue for many people, Vivante started to provide a >>> kernel module so you can easily have the latest driver on an older >>> kernel. >>> >>> Since I've updated the graphics to the latest (5.0.11 p7.1), the >>> driver inside the 3.14.28 kernel is outdated so you need to use the >>> Vivante kernel module. I didn't for the selection of the kernel module >>> when the libraries are selected since some kernels (3.14.52) have the >>> correct driver built-in. >>> >> >> Got it now, the missing part was: >> >> BR2_PACKAGE_KERNEL_MODULE_IMX_GPU_VIV=y >> >> Qt5 eglfs and gstreamer imxeglvivsink are working now... > > Good to hear! > >>> Sorry for the confusion but know that if you want to make sure the >>> driver matches the user-space blobs, always select the Vivante kernel >>> module as I'll make to always update both at the same time. >>> >> >> Maybe a little hint in board/boundarydevices/nitrogen6x/readme.txt would be useful? > > Well it is not Nitrogen6x-specific, it applies to all i.MX6 platforms > so I'm not sure where would be the best place to give this info apart > from the help text. Thomas, any idea on this? > > Yocto is forcing the use of the Vivante kernel module, maybe we should > do the same but I'm not fond of this approach. We can't force select because BR2_PACKAGE_KERNEL_MODULE_IMX_GPU_VIV depends on the kernel to be built. But we could do select BR2_PACKAGE_KERNEL_MODULE_IMX_GPU_VIV if BR2_LINUX_KERNEL I don't think this would be such a bad idea. Added size isn't really a big deal. Of course, the user still has to load the module... Regards, Arnout > >> Many thanks for your support... > > No problem. Thanks for your valuable feedback! > > Regards, > Gary > _______________________________________________ > buildroot mailing list > buildroot@busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot >
--- a/package/libimxvpuapi/libimxvpuapi.mk +++ b/package/libimxvpuapi/libimxvpuapi.mk @@ -14,7 +14,7 @@ LIBIMXVPUAPI_INSTALL_STAGING = YES define LIBIMXVPUAPI_CONFIGURE_CMDS cd $(@D); \ $(TARGET_CONFIGURE_OPTS) $(HOST_DIR)/usr/bin/python2 ./waf configure \ - --prefix=/usr + --prefix=/usr --libdir=/usr/lib endef define LIBIMXVPUAPI_BUILD_CMDS