[v3] PXA DMA-capable PATA driver

This patch adds a driver for a harddrive attached to PXA address and data bus.
Unlike pata_platform, this driver allows usage of PXA DMA controller, making the
transmission speed 3x higher.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
 arch/arm/mach-pxa/include/mach/pata_pxa.h |   33 +++
 drivers/ata/Kconfig                       |   11 +
 drivers/ata/Makefile                      |    1 +
 drivers/ata/pata_pxa.c                    |  404 +++++++++++++++++++++++++++++
 4 files changed, 449 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-pxa/include/mach/pata_pxa.h
 create mode 100644 drivers/ata/pata_pxa.c

Dne Út 18. května 2010 01:09:28 Marek Vasut napsal(a):
> This patch adds a driver for a harddrive attached to PXA address and data
> bus. Unlike pata_platform, this driver allows usage of PXA DMA controller,
> making the transmission speed 3x higher.

Hey guys, all the issues pointed out should be addressed. See below.
Cheers!

> 
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> ---
>  arch/arm/mach-pxa/include/mach/pata_pxa.h |   33 +++
>  drivers/ata/Kconfig                       |   11 +
>  drivers/ata/Makefile                      |    1 +
>  drivers/ata/pata_pxa.c                    |  404
> +++++++++++++++++++++++++++++ 4 files changed, 449 insertions(+), 0
> deletions(-)
>  create mode 100644 arch/arm/mach-pxa/include/mach/pata_pxa.h
>  create mode 100644 drivers/ata/pata_pxa.c
> 
> diff --git a/arch/arm/mach-pxa/include/mach/pata_pxa.h
> b/arch/arm/mach-pxa/include/mach/pata_pxa.h new file mode 100644
> index 0000000..6cf7df1
> --- /dev/null
> +++ b/arch/arm/mach-pxa/include/mach/pata_pxa.h
> @@ -0,0 +1,33 @@
> +/*
> + * Generic PXA PATA driver
> + *
> + * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
> + *
> + *  This program is free software; you can redistribute it and/or modify
> + *  it under the terms of the GNU General Public License as published by
> + *  the Free Software Foundation; either version 2, or (at your option)
> + *  any later version.
> + *
> + *  This program is distributed in the hope that it will be useful,
> + *  but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *  GNU General Public License for more details.
> + *
> + *  You should have received a copy of the GNU General Public License
> + *  along with this program; see the file COPYING.  If not, write to
> + *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#ifndef	__MACH_PATA_PXA_H__
> +#define	__MACH_PATA_PXA_H__
> +
> +struct pata_pxa_pdata {
> +	/* PXA DMA DREQ<0:2> pin */
> +	uint32_t	dma_dreq;
> +	/* Register shift */
> +	uint32_t	reg_shift;
> +	/* IRQ flags */
> +	uint32_t	irq_flags;
> +};
> +
> +#endif	/* __MACH_PATA_PXA_H__ */
> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> index 01c52c4..5cd3e8c 100644
> --- a/drivers/ata/Kconfig
> +++ b/drivers/ata/Kconfig
> @@ -684,6 +684,17 @@ config PATA_VIA
> 
>  	  If unsure, say N.
> 
> +config PATA_PXA
> +	tristate "PXA DMA-capable PATA support"
> +	depends on ARCH_PXA
> +	help
> +	  This option enables support for harddrive attached to PXA CPU's bus.
> +
> +	  NOTE: This driver utilizes PXA DMA controller, in case your hardware
> +	        is not capable of doing MWDMA, use pata_platform instead.
> +
> +	  If unsure, say N.
> +
>  config PATA_WINBOND
>  	tristate "Winbond SL82C105 PATA support"
>  	depends on PCI
> diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
> index fc936d4..5ecf45a 100644
> --- a/drivers/ata/Makefile
> +++ b/drivers/ata/Makefile
> @@ -79,6 +79,7 @@ obj-$(CONFIG_PATA_PLATFORM)	+= pata_platform.o
>  obj-$(CONFIG_PATA_AT91)	+= pata_at91.o
>  obj-$(CONFIG_PATA_OF_PLATFORM)	+= pata_of_platform.o
>  obj-$(CONFIG_PATA_ICSIDE)	+= pata_icside.o
> +obj-$(CONFIG_PATA_PXA)		+= pata_pxa.o
>  # Should be last but two libata driver
>  obj-$(CONFIG_PATA_ACPI)		+= pata_acpi.o
>  # Should be last but one libata driver
> diff --git a/drivers/ata/pata_pxa.c b/drivers/ata/pata_pxa.c
> new file mode 100644
> index 0000000..3f3071e
> --- /dev/null
> +++ b/drivers/ata/pata_pxa.c
> @@ -0,0 +1,404 @@
> +/*
> + * Generic PXA PATA driver
> + *
> + * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
> + *
> + *  This program is free software; you can redistribute it and/or modify
> + *  it under the terms of the GNU General Public License as published by
> + *  the Free Software Foundation; either version 2, or (at your option)
> + *  any later version.
> + *
> + *  This program is distributed in the hope that it will be useful,
> + *  but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *  GNU General Public License for more details.
> + *
> + *  You should have received a copy of the GNU General Public License
> + *  along with this program; see the file COPYING.  If not, write to
> + *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/blkdev.h>
> +#include <linux/ata.h>
> +#include <linux/libata.h>
> +#include <linux/platform_device.h>
> +#include <linux/gpio.h>
> +#include <linux/slab.h>
> +#include <linux/completion.h>
> +
> +#include <scsi/scsi_host.h>
> +
> +#include <mach/pxa2xx-regs.h>
> +#include <mach/pata_pxa.h>
> +#include <mach/dma.h>
> +
> +#define DRV_NAME	"pata_pxa"
> +#define DRV_VERSION	"0.1"
> +
> +struct pata_pxa_data {
> +	uint32_t		dma_channel;
> +	struct pxa_dma_desc	*dma_desc;
> +	dma_addr_t		dma_desc_addr;
> +	uint32_t		dma_desc_id;
> +
> +	/* DMA IO physical address */
> +	uint32_t		dma_io_addr;
> +	/* PXA DREQ<0:2> pin selector */
> +	uint32_t		dma_dreq;
> +	/* DMA DCSR register value */
> +	uint32_t		dma_dcsr;
> +
> +	struct completion	dma_done;
> +};
> +
> +/*
> + * Setup the DMA descriptors. The size is transfer capped at 4k per
> descriptor, + * if the transfer is longer, it is split into multiple
> chained descriptors. + */
> +static void pxa_load_dmac(struct scatterlist *sg, struct ata_queued_cmd
> *qc) +{
> +	struct pata_pxa_data *pd = qc->ap->private_data;
> +
> +	uint32_t cpu_len, seg_len;
> +	dma_addr_t cpu_addr;
> +
> +	cpu_addr = sg_dma_address(sg);
> +	cpu_len = sg_dma_len(sg);
> +
> +	do {
> +		seg_len = (cpu_len > 0x1000) ? 0x1000 : cpu_len;
> +
> +		pd->dma_desc[pd->dma_desc_id].ddadr = pd->dma_desc_addr +
> +			((pd->dma_desc_id + 1) * sizeof(struct pxa_dma_desc));
> +
> +		pd->dma_desc[pd->dma_desc_id].dcmd = DCMD_BURST32 | DCMD_WIDTH2 
|
> +					(DCMD_LENGTH & seg_len);
> +
> +		if (qc->tf.flags & ATA_TFLAG_WRITE) {
> +			pd->dma_desc[pd->dma_desc_id].dsadr = cpu_addr;
> +			pd->dma_desc[pd->dma_desc_id].dtadr = pd->dma_io_addr;
> +			pd->dma_desc[pd->dma_desc_id].dcmd |= DCMD_INCSRCADDR |
> +						DCMD_FLOWTRG;
> +		} else {
> +			pd->dma_desc[pd->dma_desc_id].dsadr = pd->dma_io_addr;
> +			pd->dma_desc[pd->dma_desc_id].dtadr = cpu_addr;
> +			pd->dma_desc[pd->dma_desc_id].dcmd |= DCMD_INCTRGADDR |
> +						DCMD_FLOWSRC;
> +		}
> +
> +		cpu_len -= seg_len;
> +		cpu_addr += seg_len;
> +		pd->dma_desc_id++;
> +
> +	} while(cpu_len);
> +
> +	/* Should not happen */
> +	if (seg_len & 0x1f)
> +		DALGN |= (1 << pd->dma_dreq);
> +}
> +
> +/*
> + * Prepare taskfile for submission.
> + */
> +static void pxa_qc_prep(struct ata_queued_cmd *qc)
> +{
> +	struct pata_pxa_data *pd = qc->ap->private_data;
> +	int si = 0;
> +	struct scatterlist *sg;
> +
> +	if (!(qc->flags & ATA_QCFLAG_DMAMAP))
> +		return;
> +
> +	pd->dma_desc_id = 0;
> +
> +	DCSR(pd->dma_channel) = 0;
> +	DALGN &= ~(1 << pd->dma_dreq);
> +
> +	for_each_sg(qc->sg, sg, qc->n_elem, si)
> +		pxa_load_dmac(sg, qc);
> +
> +	pd->dma_desc[pd->dma_desc_id - 1].ddadr = DDADR_STOP;
> +
> +	/* Fire IRQ only at the end of last block */
> +	pd->dma_desc[pd->dma_desc_id - 1].dcmd |= DCMD_ENDIRQEN;
> +
> +	DDADR(pd->dma_channel) = pd->dma_desc_addr;
> +	DRCMR(pd->dma_dreq) = DRCMR_MAPVLD | pd->dma_channel;
> +
> +}

Jeff, this is now moved.

> +
> +/*
> + * Configure the DMA controller, load the DMA descriptors, but don't start
> the + * DMA controller yet. Only issue the ATA command.
> + */
> +static void pxa_bmdma_setup(struct ata_queued_cmd *qc)
> +{
> +	qc->ap->ops->sff_exec_command(qc->ap, &qc->tf);
> +}
> +
> +/*
> + * Execute the DMA transfer.
> + */
> +static void pxa_bmdma_start(struct ata_queued_cmd *qc)
> +{
> +	struct pata_pxa_data *pd = qc->ap->private_data;
> +	init_completion(&pd->dma_done);
> +	DCSR(pd->dma_channel) = DCSR_RUN;
> +}
> +
> +/*
> + * Wait until the DMA transfer completes, then stop the DMA controller.
> + */
> +static void pxa_bmdma_stop(struct ata_queued_cmd *qc)
> +{
> +	struct pata_pxa_data *pd = qc->ap->private_data;
> +
> +	if ((DCSR(pd->dma_channel) & DCSR_RUN) &&
> +		wait_for_completion_timeout(&pd->dma_done, HZ))
> +		dev_err(qc->ap->dev, "Timeout waiting for DMA completion!");
> +
> +	DCSR(pd->dma_channel) = 0;
> +}
> +
> +/*
> + * Read DMA status. The bmdma_stop() will take care of properly finishing
> the + * DMA transfer so we always have DMA-complete interrupt here.
> + */
> +static unsigned char pxa_bmdma_status(struct ata_port *ap)
> +{
> +	struct pata_pxa_data *pd = ap->private_data;
> +	unsigned char ret = ATA_DMA_INTR;
> +
> +	if (pd->dma_dcsr & DCSR_BUSERR)
> +		ret |= ATA_DMA_ERR;
> +
> +	return ret;
> +}

Yes Robert, you were right. Fixed. Thanks
> +
> +/*
> + * No IRQ register present so we do nothing.
> + */
> +static void pxa_irq_clear(struct ata_port *ap)
> +{
> +}
> +
> +/*
> + * Check for ATAPI DMA. ATAPI DMA is unsupported by this driver. It's
> still + * unclear why ATAPI has DMA issues.
> + */
> +static int pxa_check_atapi_dma(struct ata_queued_cmd *qc)
> +{
> +	return -EOPNOTSUPP;
> +}
> +

See libata-core.c:

4766 /**
4767  *      atapi_check_dma - Check whether ATAPI DMA can be supported
4768  *      @qc: Metadata associated with taskfile to check
4769  *
4770  *      Allow low-level driver to filter ATA PACKET commands, returning
4771  *      a status indicating whether or not it is OK to use DMA for the
4772  *      supplied PACKET command.
4773  *
4774  *      LOCKING:
4775  *      spin_lock_irqsave(host lock)
4776  *
4777  *      RETURNS: 0 when ATAPI DMA can be used
4778  *               nonzero otherwise
4779  */

And since ATAPI DMA can NOT be used and -EOPNOTSUPP is nonzero, this is fine.

> +static struct scsi_host_template pxa_ata_sht = {
> +	ATA_BMDMA_SHT(DRV_NAME),
> +};
> +
> +static struct ata_port_operations pxa_ata_port_ops = {
> +	.inherits		= &ata_bmdma_port_ops,
> +	.cable_detect		= ata_cable_40wire,
> +
> +	.bmdma_setup		= pxa_bmdma_setup,
> +	.bmdma_start		= pxa_bmdma_start,
> +	.bmdma_stop		= pxa_bmdma_stop,
> +	.bmdma_status		= pxa_bmdma_status,
> +
> +	.check_atapi_dma	= pxa_check_atapi_dma,
> +
> +	.sff_irq_clear		= pxa_irq_clear,
> +
> +	.qc_prep		= pxa_qc_prep,
> +};
> +
> +/*
> + * DMA interrupt handler.
> + */
> +static void pxa_ata_dma_irq(int dma, void *port)
> +{
> +	struct ata_port *ap = port;
> +	struct pata_pxa_data *pd = ap->private_data;
> +
> +	pd->dma_dcsr = DCSR(dma);
> +	DCSR(dma) = pd->dma_dcsr;
> +
> +	if (pd->dma_dcsr & DCSR_STOPSTATE)
> +		complete(&pd->dma_done);
> +}
> +
> +static int __devinit pxa_ata_probe(struct platform_device *pdev)
> +{
> +	struct ata_host *host;
> +	struct ata_port *ap;
> +	struct pata_pxa_data *data;
> +	struct resource *cmd_res;
> +	struct resource *ctl_res;
> +	struct resource *dma_res;
> +	struct resource *irq_res;
> +	struct pata_pxa_pdata *pdata = pdev->dev.platform_data;
> +
> +	/*
> +	 * Resource validation, three resources are needed:
> +	 *  - CMD port base address
> +	 *  - CTL port base address
> +	 *  - DMA port base address
> +	 *  - IRQ pin
> +	 */
> +	if (pdev->num_resources != 4) {
> +		dev_err(&pdev->dev, "invalid number of resources\n");
> +		return -EINVAL;
> +	}
> +
> +	/*
> +	 * CMD port base address
> +	 */
> +	cmd_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (unlikely(cmd_res == NULL))
> +		return -EINVAL;
> +
> +	/*
> +	 * CTL port base address
> +	 */
> +	ctl_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> +	if (unlikely(ctl_res == NULL))
> +		return -EINVAL;
> +
> +	/*
> +	 * DMA port base address
> +	 */
> +	dma_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
> +	if (unlikely(dma_res == NULL))
> +		return -EINVAL;
> +
> +	/*
> +	 * IRQ pin
> +	 */
> +	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> +	if (unlikely(irq_res == NULL))
> +		return -EINVAL;
> +
> +	/*
> +	 * Allocate the host
> +	 */
> +	host = ata_host_alloc(&pdev->dev, 1);
> +	if (!host)
> +		return -ENOMEM;
> +
> +	ap		= host->ports[0];
> +	ap->ops		= &pxa_ata_port_ops;
> +	ap->pio_mask	= ATA_PIO4;
> +	ap->mwdma_mask	= ATA_MWDMA2;
> +	ap->flags	= ATA_FLAG_MMIO;
> +
> +	ap->ioaddr.cmd_addr	= devm_ioremap(&pdev->dev, cmd_res->start,
> +						resource_size(cmd_res));
> +	ap->ioaddr.ctl_addr	= devm_ioremap(&pdev->dev, ctl_res->start,
> +						resource_size(ctl_res));
> +	ap->ioaddr.bmdma_addr	= devm_ioremap(&pdev->dev, dma_res->start,
> +						resource_size(dma_res));
> +
> +	/*
> +	 * Adjust register offsets
> +	 */
> +	ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
> +	ap->ioaddr.data_addr	= ap->ioaddr.cmd_addr +
> +					(ATA_REG_DATA << pdata->reg_shift);
> +	ap->ioaddr.error_addr	= ap->ioaddr.cmd_addr +
> +					(ATA_REG_ERR << pdata->reg_shift);
> +	ap->ioaddr.feature_addr	= ap->ioaddr.cmd_addr +
> +					(ATA_REG_FEATURE << pdata->reg_shift);
> +	ap->ioaddr.nsect_addr	= ap->ioaddr.cmd_addr +
> +					(ATA_REG_NSECT << pdata->reg_shift);
> +	ap->ioaddr.lbal_addr	= ap->ioaddr.cmd_addr +
> +					(ATA_REG_LBAL << pdata->reg_shift);
> +	ap->ioaddr.lbam_addr	= ap->ioaddr.cmd_addr +
> +					(ATA_REG_LBAM << pdata->reg_shift);
> +	ap->ioaddr.lbah_addr	= ap->ioaddr.cmd_addr +
> +					(ATA_REG_LBAH << pdata->reg_shift);
> +	ap->ioaddr.device_addr	= ap->ioaddr.cmd_addr +
> +					(ATA_REG_DEVICE << pdata->reg_shift);
> +	ap->ioaddr.status_addr	= ap->ioaddr.cmd_addr +
> +					(ATA_REG_STATUS << pdata->reg_shift);
> +	ap->ioaddr.command_addr	= ap->ioaddr.cmd_addr +
> +					(ATA_REG_CMD << pdata->reg_shift);
> +
> +	/*
> +	 * Allocate and load driver's internal data structure
> +	 */
> +	data = devm_kzalloc(&pdev->dev, sizeof(struct pata_pxa_data),
> +								GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	ap->private_data = data;
> +	data->dma_dreq = pdata->dma_dreq;
> +	data->dma_io_addr = dma_res->start;
> +
> +	/*
> +	 * Request the DMA channel
> +	 */
> +	data->dma_channel = pxa_request_dma(DRV_NAME, DMA_PRIO_LOW,
> +						pxa_ata_dma_irq, ap);
> +	if (data->dma_channel < 0)
> +		return -EBUSY;
> +
> +	/*
> +	 * Stop and clear the DMA channel
> +	 */
> +	DCSR(data->dma_channel) = 0;
> +
> +	/*
> +	 * Allocate space for the DMA descriptors
> +	 */
> +	data->dma_desc = dmam_alloc_coherent(&pdev->dev, PAGE_SIZE,
> +					&data->dma_desc_addr, GFP_KERNEL);
> +
> +	/*
> +	 * Activate the ATA host
> +	 */
> +	return ata_host_activate(host, irq_res->start, ata_sff_interrupt,
> +				pdata->irq_flags, &pxa_ata_sht);
> +}
> +
> +static int __devexit pxa_ata_remove(struct platform_device *pdev)
> +{
> +	struct ata_host *host = dev_get_drvdata(&pdev->dev);
> +	struct pata_pxa_data *data = host->ports[0]->private_data;
> +
> +	pxa_free_dma(data->dma_channel);
> +
> +	ata_host_detach(host);
> +
> +	return 0;
> +}
> +
> +static struct platform_driver pxa_ata_driver = {
> +	.probe		= pxa_ata_probe,
> +	.remove		= __devexit_p(pxa_ata_remove),
> +	.driver		= {
> +		.name		= DRV_NAME,
> +		.owner		= THIS_MODULE,
> +	},
> +};
> +
> +static int __init pxa_ata_init(void)
> +{
> +	return platform_driver_register(&pxa_ata_driver);
> +}
> +
> +static void __exit pxa_ata_exit(void)
> +{
> +	platform_driver_unregister(&pxa_ata_driver);
> +}
> +
> +module_init(pxa_ata_init);
> +module_exit(pxa_ata_exit);
> +
> +MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
> +MODULE_DESCRIPTION("DMA-capable driver for PATA on PXA CPU");
> +MODULE_LICENSE("GPL");
> +MODULE_VERSION(DRV_VERSION);
> +MODULE_ALIAS("platform:" DRV_NAME);
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

On 05/17/2010 07:09 PM, Marek Vasut wrote:
> This patch adds a driver for a harddrive attached to PXA address and data bus.
> Unlike pata_platform, this driver allows usage of PXA DMA controller, making the
> transmission speed 3x higher.
>
> Signed-off-by: Marek Vasut<marek.vasut@gmail.com>
> ---
>   arch/arm/mach-pxa/include/mach/pata_pxa.h |   33 +++
>   drivers/ata/Kconfig                       |   11 +
>   drivers/ata/Makefile                      |    1 +
>   drivers/ata/pata_pxa.c                    |  404 +++++++++++++++++++++++++++++
>   4 files changed, 449 insertions(+), 0 deletions(-)
>   create mode 100644 arch/arm/mach-pxa/include/mach/pata_pxa.h
>   create mode 100644 drivers/ata/pata_pxa.c

Acked-by: Jeff Garzik <jgarzik@redhat.com>

There are a few minor issues remaining, but we can take care of them 
post-merge.  I presume you'll send this via arm tree.


--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Dne Út 18. května 2010 05:56:38 Jeff Garzik napsal(a):
> On 05/17/2010 07:09 PM, Marek Vasut wrote:
> > This patch adds a driver for a harddrive attached to PXA address and data
> > bus. Unlike pata_platform, this driver allows usage of PXA DMA
> > controller, making the transmission speed 3x higher.
> > 
> > Signed-off-by: Marek Vasut<marek.vasut@gmail.com>
> > ---
> > 
> >   arch/arm/mach-pxa/include/mach/pata_pxa.h |   33 +++
> >   drivers/ata/Kconfig                       |   11 +
> >   drivers/ata/Makefile                      |    1 +
> >   drivers/ata/pata_pxa.c                    |  404
> >   +++++++++++++++++++++++++++++ 4 files changed, 449 insertions(+), 0
> >   deletions(-)
> >   create mode 100644 arch/arm/mach-pxa/include/mach/pata_pxa.h
> >   create mode 100644 drivers/ata/pata_pxa.c
> 
> Acked-by: Jeff Garzik <jgarzik@redhat.com>
> 
> There are a few minor issues remaining, but we can take care of them
> post-merge.  I presume you'll send this via arm tree.

If you're fine with it, I guess that'd be the best way.

Thanks!
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Marek Vasut <marek.vasut@gmail.com> writes:

> Dne Út 18. května 2010 01:09:28 Marek Vasut napsal(a):
>> This patch adds a driver for a harddrive attached to PXA address and data
>> bus. Unlike pata_platform, this driver allows usage of PXA DMA controller,
>> making the transmission speed 3x higher.
>
> Hey guys, all the issues pointed out should be addressed. See below.
> Cheers!

For the first iteration, you can have my :
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>

For the next iteration, it would be good to :
 - fix the error path in pxa_ata_probe()
   => if dmam_alloc_coherent() fails
   => if pxa_request_dma() fails
 - in pxa_ata_remove()
   => maybe call devm_iounmap()

--
Robert
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Dne St 19. května 2010 13:19:14 Robert Jarzmik napsal(a):
> Marek Vasut <marek.vasut@gmail.com> writes:
> > Dne Út 18. května 2010 01:09:28 Marek Vasut napsal(a):
> >> This patch adds a driver for a harddrive attached to PXA address and
> >> data bus. Unlike pata_platform, this driver allows usage of PXA DMA
> >> controller, making the transmission speed 3x higher.
> > 
> > Hey guys, all the issues pointed out should be addressed. See below.
> > Cheers!
> 
> For the first iteration, you can have my :
> Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
> 
> For the next iteration, it would be good to :
>  - fix the error path in pxa_ata_probe()
>    => if dmam_alloc_coherent() fails
>    => if pxa_request_dma() fails
>  - in pxa_ata_remove()
>    => maybe call devm_iounmap()
> 

It'd be awesome if you could just point out all the issues at once ... about 
devm_x(), you probably don't need to, it's 'managed'.

> --
> Robert
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html