Message ID | 1452871476-11752-1-git-send-email-justin.waters@timesys.com |
---|---|
State | Accepted |
Headers | show |
[+cc Richard] On Fri, Jan 15, 2016 at 10:24:35AM -0500, Justin Waters wrote: > The settings in GPR8 are dependent upon the particular layout of the > hardware platform. As such, they should be configurable via the device > tree. > > As many boards have been using the default values, this implementation > uses the old values if they are not specified in the device tree. > > Signed-off-by: Justin Waters <justin.waters@timesys.com> Waiting for an ack from Lucas, since he had comments on the last version. > --- > .../devicetree/bindings/pci/fsl,imx6q-pcie.txt | 7 ++++ > drivers/pci/host/pci-imx6.c | 42 +++++++++++++++++++--- > 2 files changed, 44 insertions(+), 5 deletions(-) > > diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > index 6fbba53..3be80c6 100644 > --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > @@ -13,6 +13,13 @@ Required properties: > - clock-names: Must include the following additional entries: > - "pcie_phy" > > +Optional properties: > +- fsl,tx-deemph-gen1: Gen1 De-emphasis value. Default: 0 > +- fsl,tx-deemph-gen2-3p5db: Gen2 (3.5db) De-emphasis value. Default: 0 > +- fsl,tx-deemph-gen2-6db: Gen2 (6db) De-emphasis value. Default: 20 > +- fsl,tx-swing-full: Gen2 TX SWING FULL value. Default: 127 > +- fsl,tx-swing-low: TX launch amplitude swing_low value. Default: 127 > + > Example: > > pcie@0x01000000 { > diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c > index 230ebf9..cc04497 100644 > --- a/drivers/pci/host/pci-imx6.c > +++ b/drivers/pci/host/pci-imx6.c > @@ -39,6 +39,11 @@ struct imx6_pcie { > struct pcie_port pp; > struct regmap *iomuxc_gpr; > void __iomem *mem_base; > + u32 tx_deemph_gen1; > + u32 tx_deemph_gen2_3p5db; > + u32 tx_deemph_gen2_6db; > + u32 tx_swing_full; > + u32 tx_swing_low; > }; > > /* PCIe Root Complex registers (memory-mapped) */ > @@ -317,15 +322,20 @@ static void imx6_pcie_init_phy(struct pcie_port *pp) > IMX6Q_GPR12_LOS_LEVEL, 9 << 4); > > regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, > - IMX6Q_GPR8_TX_DEEMPH_GEN1, 0 << 0); > + IMX6Q_GPR8_TX_DEEMPH_GEN1, > + imx6_pcie->tx_deemph_gen1 << 0); > regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, > - IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, 0 << 6); > + IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, > + imx6_pcie->tx_deemph_gen2_3p5db << 6); > regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, > - IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, 20 << 12); > + IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, > + imx6_pcie->tx_deemph_gen2_6db << 12); > regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, > - IMX6Q_GPR8_TX_SWING_FULL, 127 << 18); > + IMX6Q_GPR8_TX_SWING_FULL, > + imx6_pcie->tx_swing_full << 18); > regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, > - IMX6Q_GPR8_TX_SWING_LOW, 127 << 25); > + IMX6Q_GPR8_TX_SWING_LOW, > + imx6_pcie->tx_swing_low << 25); > } > > static int imx6_pcie_wait_for_link(struct pcie_port *pp) > @@ -565,6 +575,7 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) > struct imx6_pcie *imx6_pcie; > struct pcie_port *pp; > struct resource *dbi_base; > + struct device_node *node = pdev->dev.of_node; > int ret; > > imx6_pcie = devm_kzalloc(&pdev->dev, sizeof(*imx6_pcie), GFP_KERNEL); > @@ -617,6 +628,27 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) > return PTR_ERR(imx6_pcie->iomuxc_gpr); > } > > + /* Grab PCIe PHY Tx Settings */ > + if (of_property_read_u32 > + (node, "fsl,tx-deemph-gen1", &imx6_pcie->tx_deemph_gen1)) > + imx6_pcie->tx_deemph_gen1 = 0; > + > + if (of_property_read_u32 > + (node, "fsl,tx-deemph-gen2-3p5db", &imx6_pcie->tx_deemph_gen2_3p5db)) > + imx6_pcie->tx_deemph_gen2_3p5db = 0; > + > + if (of_property_read_u32 > + (node, "fsl,tx-deemph-gen2-6db", &imx6_pcie->tx_deemph_gen2_6db)) > + imx6_pcie->tx_deemph_gen2_6db = 20; > + > + if (of_property_read_u32 > + (node, "fsl,tx-swing-full", &imx6_pcie->tx_swing_full)) > + imx6_pcie->tx_swing_full = 127; > + > + if (of_property_read_u32 > + (node, "fsl,tx-swing-low", &imx6_pcie->tx_swing_low)) > + imx6_pcie->tx_swing_low = 127; > + > ret = imx6_add_pcie_port(pp, pdev); > if (ret < 0) > return ret; > -- > 2.5.0 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-pci" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Feb 4, 2016 at 12:25 PM, Bjorn Helgaas <helgaas@kernel.org> wrote: > [+cc Richard] > > On Fri, Jan 15, 2016 at 10:24:35AM -0500, Justin Waters wrote: >> The settings in GPR8 are dependent upon the particular layout of the >> hardware platform. As such, they should be configurable via the device >> tree. >> >> As many boards have been using the default values, this implementation >> uses the old values if they are not specified in the device tree. >> >> Signed-off-by: Justin Waters <justin.waters@timesys.com> > > Waiting for an ack from Lucas, since he had comments on the last version. > Lucas, I just wanted to check in and see if you had any additional feedback for me. Did v2 address your concerns? Thank you, -Justin >> --- >> .../devicetree/bindings/pci/fsl,imx6q-pcie.txt | 7 ++++ >> drivers/pci/host/pci-imx6.c | 42 +++++++++++++++++++--- >> 2 files changed, 44 insertions(+), 5 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt >> index 6fbba53..3be80c6 100644 >> --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt >> +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt >> @@ -13,6 +13,13 @@ Required properties: >> - clock-names: Must include the following additional entries: >> - "pcie_phy" >> >> +Optional properties: >> +- fsl,tx-deemph-gen1: Gen1 De-emphasis value. Default: 0 >> +- fsl,tx-deemph-gen2-3p5db: Gen2 (3.5db) De-emphasis value. Default: 0 >> +- fsl,tx-deemph-gen2-6db: Gen2 (6db) De-emphasis value. Default: 20 >> +- fsl,tx-swing-full: Gen2 TX SWING FULL value. Default: 127 >> +- fsl,tx-swing-low: TX launch amplitude swing_low value. Default: 127 >> + >> Example: >> >> pcie@0x01000000 { >> diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c >> index 230ebf9..cc04497 100644 >> --- a/drivers/pci/host/pci-imx6.c >> +++ b/drivers/pci/host/pci-imx6.c >> @@ -39,6 +39,11 @@ struct imx6_pcie { >> struct pcie_port pp; >> struct regmap *iomuxc_gpr; >> void __iomem *mem_base; >> + u32 tx_deemph_gen1; >> + u32 tx_deemph_gen2_3p5db; >> + u32 tx_deemph_gen2_6db; >> + u32 tx_swing_full; >> + u32 tx_swing_low; >> }; >> >> /* PCIe Root Complex registers (memory-mapped) */ >> @@ -317,15 +322,20 @@ static void imx6_pcie_init_phy(struct pcie_port *pp) >> IMX6Q_GPR12_LOS_LEVEL, 9 << 4); >> >> regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, >> - IMX6Q_GPR8_TX_DEEMPH_GEN1, 0 << 0); >> + IMX6Q_GPR8_TX_DEEMPH_GEN1, >> + imx6_pcie->tx_deemph_gen1 << 0); >> regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, >> - IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, 0 << 6); >> + IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, >> + imx6_pcie->tx_deemph_gen2_3p5db << 6); >> regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, >> - IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, 20 << 12); >> + IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, >> + imx6_pcie->tx_deemph_gen2_6db << 12); >> regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, >> - IMX6Q_GPR8_TX_SWING_FULL, 127 << 18); >> + IMX6Q_GPR8_TX_SWING_FULL, >> + imx6_pcie->tx_swing_full << 18); >> regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, >> - IMX6Q_GPR8_TX_SWING_LOW, 127 << 25); >> + IMX6Q_GPR8_TX_SWING_LOW, >> + imx6_pcie->tx_swing_low << 25); >> } >> >> static int imx6_pcie_wait_for_link(struct pcie_port *pp) >> @@ -565,6 +575,7 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) >> struct imx6_pcie *imx6_pcie; >> struct pcie_port *pp; >> struct resource *dbi_base; >> + struct device_node *node = pdev->dev.of_node; >> int ret; >> >> imx6_pcie = devm_kzalloc(&pdev->dev, sizeof(*imx6_pcie), GFP_KERNEL); >> @@ -617,6 +628,27 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) >> return PTR_ERR(imx6_pcie->iomuxc_gpr); >> } >> >> + /* Grab PCIe PHY Tx Settings */ >> + if (of_property_read_u32 >> + (node, "fsl,tx-deemph-gen1", &imx6_pcie->tx_deemph_gen1)) >> + imx6_pcie->tx_deemph_gen1 = 0; >> + >> + if (of_property_read_u32 >> + (node, "fsl,tx-deemph-gen2-3p5db", &imx6_pcie->tx_deemph_gen2_3p5db)) >> + imx6_pcie->tx_deemph_gen2_3p5db = 0; >> + >> + if (of_property_read_u32 >> + (node, "fsl,tx-deemph-gen2-6db", &imx6_pcie->tx_deemph_gen2_6db)) >> + imx6_pcie->tx_deemph_gen2_6db = 20; >> + >> + if (of_property_read_u32 >> + (node, "fsl,tx-swing-full", &imx6_pcie->tx_swing_full)) >> + imx6_pcie->tx_swing_full = 127; >> + >> + if (of_property_read_u32 >> + (node, "fsl,tx-swing-low", &imx6_pcie->tx_swing_low)) >> + imx6_pcie->tx_swing_low = 127; >> + >> ret = imx6_add_pcie_port(pp, pdev); >> if (ret < 0) >> return ret; >> -- >> 2.5.0 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-pci" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Feb 19, 2016 at 03:25:26PM -0500, Justin Waters wrote: > On Thu, Feb 4, 2016 at 12:25 PM, Bjorn Helgaas <helgaas@kernel.org> wrote: > > [+cc Richard] > > > > On Fri, Jan 15, 2016 at 10:24:35AM -0500, Justin Waters wrote: > >> The settings in GPR8 are dependent upon the particular layout of the > >> hardware platform. As such, they should be configurable via the device > >> tree. > >> > >> As many boards have been using the default values, this implementation > >> uses the old values if they are not specified in the device tree. > >> > >> Signed-off-by: Justin Waters <justin.waters@timesys.com> > > > > Waiting for an ack from Lucas, since he had comments on the last version. > > > > Lucas, I just wanted to check in and see if you had any additional > feedback for me. Did v2 address your concerns? Just to be clear, I'm waiting for an ack from the IMX6 maintainers (Richard or Lucas) before applying this. > >> --- > >> .../devicetree/bindings/pci/fsl,imx6q-pcie.txt | 7 ++++ > >> drivers/pci/host/pci-imx6.c | 42 +++++++++++++++++++--- > >> 2 files changed, 44 insertions(+), 5 deletions(-) > >> > >> diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > >> index 6fbba53..3be80c6 100644 > >> --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > >> +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > >> @@ -13,6 +13,13 @@ Required properties: > >> - clock-names: Must include the following additional entries: > >> - "pcie_phy" > >> > >> +Optional properties: > >> +- fsl,tx-deemph-gen1: Gen1 De-emphasis value. Default: 0 > >> +- fsl,tx-deemph-gen2-3p5db: Gen2 (3.5db) De-emphasis value. Default: 0 > >> +- fsl,tx-deemph-gen2-6db: Gen2 (6db) De-emphasis value. Default: 20 > >> +- fsl,tx-swing-full: Gen2 TX SWING FULL value. Default: 127 > >> +- fsl,tx-swing-low: TX launch amplitude swing_low value. Default: 127 > >> + > >> Example: > >> > >> pcie@0x01000000 { > >> diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c > >> index 230ebf9..cc04497 100644 > >> --- a/drivers/pci/host/pci-imx6.c > >> +++ b/drivers/pci/host/pci-imx6.c > >> @@ -39,6 +39,11 @@ struct imx6_pcie { > >> struct pcie_port pp; > >> struct regmap *iomuxc_gpr; > >> void __iomem *mem_base; > >> + u32 tx_deemph_gen1; > >> + u32 tx_deemph_gen2_3p5db; > >> + u32 tx_deemph_gen2_6db; > >> + u32 tx_swing_full; > >> + u32 tx_swing_low; > >> }; > >> > >> /* PCIe Root Complex registers (memory-mapped) */ > >> @@ -317,15 +322,20 @@ static void imx6_pcie_init_phy(struct pcie_port *pp) > >> IMX6Q_GPR12_LOS_LEVEL, 9 << 4); > >> > >> regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, > >> - IMX6Q_GPR8_TX_DEEMPH_GEN1, 0 << 0); > >> + IMX6Q_GPR8_TX_DEEMPH_GEN1, > >> + imx6_pcie->tx_deemph_gen1 << 0); > >> regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, > >> - IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, 0 << 6); > >> + IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, > >> + imx6_pcie->tx_deemph_gen2_3p5db << 6); > >> regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, > >> - IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, 20 << 12); > >> + IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, > >> + imx6_pcie->tx_deemph_gen2_6db << 12); > >> regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, > >> - IMX6Q_GPR8_TX_SWING_FULL, 127 << 18); > >> + IMX6Q_GPR8_TX_SWING_FULL, > >> + imx6_pcie->tx_swing_full << 18); > >> regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, > >> - IMX6Q_GPR8_TX_SWING_LOW, 127 << 25); > >> + IMX6Q_GPR8_TX_SWING_LOW, > >> + imx6_pcie->tx_swing_low << 25); > >> } > >> > >> static int imx6_pcie_wait_for_link(struct pcie_port *pp) > >> @@ -565,6 +575,7 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) > >> struct imx6_pcie *imx6_pcie; > >> struct pcie_port *pp; > >> struct resource *dbi_base; > >> + struct device_node *node = pdev->dev.of_node; > >> int ret; > >> > >> imx6_pcie = devm_kzalloc(&pdev->dev, sizeof(*imx6_pcie), GFP_KERNEL); > >> @@ -617,6 +628,27 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) > >> return PTR_ERR(imx6_pcie->iomuxc_gpr); > >> } > >> > >> + /* Grab PCIe PHY Tx Settings */ > >> + if (of_property_read_u32 > >> + (node, "fsl,tx-deemph-gen1", &imx6_pcie->tx_deemph_gen1)) > >> + imx6_pcie->tx_deemph_gen1 = 0; > >> + > >> + if (of_property_read_u32 > >> + (node, "fsl,tx-deemph-gen2-3p5db", &imx6_pcie->tx_deemph_gen2_3p5db)) > >> + imx6_pcie->tx_deemph_gen2_3p5db = 0; > >> + > >> + if (of_property_read_u32 > >> + (node, "fsl,tx-deemph-gen2-6db", &imx6_pcie->tx_deemph_gen2_6db)) > >> + imx6_pcie->tx_deemph_gen2_6db = 20; > >> + > >> + if (of_property_read_u32 > >> + (node, "fsl,tx-swing-full", &imx6_pcie->tx_swing_full)) > >> + imx6_pcie->tx_swing_full = 127; > >> + > >> + if (of_property_read_u32 > >> + (node, "fsl,tx-swing-low", &imx6_pcie->tx_swing_low)) > >> + imx6_pcie->tx_swing_low = 127; > >> + > >> ret = imx6_add_pcie_port(pp, pdev); > >> if (ret < 0) > >> return ret; > >> -- > >> 2.5.0 > >> > >> -- > >> To unsubscribe from this list: send the line "unsubscribe linux-pci" in > >> the body of a message to majordomo@vger.kernel.org > >> More majordomo info at http://vger.kernel.org/majordomo-info.html > -- > To unsubscribe from this list: send the line "unsubscribe linux-pci" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Am Donnerstag, den 25.02.2016, 09:16 -0600 schrieb Bjorn Helgaas: > On Fri, Feb 19, 2016 at 03:25:26PM -0500, Justin Waters wrote: > > On Thu, Feb 4, 2016 at 12:25 PM, Bjorn Helgaas <helgaas@kernel.org> wrote: > > > [+cc Richard] > > > > > > On Fri, Jan 15, 2016 at 10:24:35AM -0500, Justin Waters wrote: > > >> The settings in GPR8 are dependent upon the particular layout of the > > >> hardware platform. As such, they should be configurable via the device > > >> tree. > > >> > > >> As many boards have been using the default values, this implementation > > >> uses the old values if they are not specified in the device tree. > > >> > > >> Signed-off-by: Justin Waters <justin.waters@timesys.com> > > > > > > Waiting for an ack from Lucas, since he had comments on the last version. > > > > > > > Lucas, I just wanted to check in and see if you had any additional > > feedback for me. Did v2 address your concerns? > > Just to be clear, I'm waiting for an ack from the IMX6 maintainers > (Richard or Lucas) before applying this. > Sorry, for the delay on my side. Patch looks good to me now, Acked-by: Lucas Stach <l.stach@pengutronix.de> > > >> --- > > >> .../devicetree/bindings/pci/fsl,imx6q-pcie.txt | 7 ++++ > > >> drivers/pci/host/pci-imx6.c | 42 +++++++++++++++++++--- > > >> 2 files changed, 44 insertions(+), 5 deletions(-) > > >> > > >> diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > > >> index 6fbba53..3be80c6 100644 > > >> --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > > >> +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > > >> @@ -13,6 +13,13 @@ Required properties: > > >> - clock-names: Must include the following additional entries: > > >> - "pcie_phy" > > >> > > >> +Optional properties: > > >> +- fsl,tx-deemph-gen1: Gen1 De-emphasis value. Default: 0 > > >> +- fsl,tx-deemph-gen2-3p5db: Gen2 (3.5db) De-emphasis value. Default: 0 > > >> +- fsl,tx-deemph-gen2-6db: Gen2 (6db) De-emphasis value. Default: 20 > > >> +- fsl,tx-swing-full: Gen2 TX SWING FULL value. Default: 127 > > >> +- fsl,tx-swing-low: TX launch amplitude swing_low value. Default: 127 > > >> + > > >> Example: > > >> > > >> pcie@0x01000000 { > > >> diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c > > >> index 230ebf9..cc04497 100644 > > >> --- a/drivers/pci/host/pci-imx6.c > > >> +++ b/drivers/pci/host/pci-imx6.c > > >> @@ -39,6 +39,11 @@ struct imx6_pcie { > > >> struct pcie_port pp; > > >> struct regmap *iomuxc_gpr; > > >> void __iomem *mem_base; > > >> + u32 tx_deemph_gen1; > > >> + u32 tx_deemph_gen2_3p5db; > > >> + u32 tx_deemph_gen2_6db; > > >> + u32 tx_swing_full; > > >> + u32 tx_swing_low; > > >> }; > > >> > > >> /* PCIe Root Complex registers (memory-mapped) */ > > >> @@ -317,15 +322,20 @@ static void imx6_pcie_init_phy(struct pcie_port *pp) > > >> IMX6Q_GPR12_LOS_LEVEL, 9 << 4); > > >> > > >> regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, > > >> - IMX6Q_GPR8_TX_DEEMPH_GEN1, 0 << 0); > > >> + IMX6Q_GPR8_TX_DEEMPH_GEN1, > > >> + imx6_pcie->tx_deemph_gen1 << 0); > > >> regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, > > >> - IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, 0 << 6); > > >> + IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, > > >> + imx6_pcie->tx_deemph_gen2_3p5db << 6); > > >> regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, > > >> - IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, 20 << 12); > > >> + IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, > > >> + imx6_pcie->tx_deemph_gen2_6db << 12); > > >> regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, > > >> - IMX6Q_GPR8_TX_SWING_FULL, 127 << 18); > > >> + IMX6Q_GPR8_TX_SWING_FULL, > > >> + imx6_pcie->tx_swing_full << 18); > > >> regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, > > >> - IMX6Q_GPR8_TX_SWING_LOW, 127 << 25); > > >> + IMX6Q_GPR8_TX_SWING_LOW, > > >> + imx6_pcie->tx_swing_low << 25); > > >> } > > >> > > >> static int imx6_pcie_wait_for_link(struct pcie_port *pp) > > >> @@ -565,6 +575,7 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) > > >> struct imx6_pcie *imx6_pcie; > > >> struct pcie_port *pp; > > >> struct resource *dbi_base; > > >> + struct device_node *node = pdev->dev.of_node; > > >> int ret; > > >> > > >> imx6_pcie = devm_kzalloc(&pdev->dev, sizeof(*imx6_pcie), GFP_KERNEL); > > >> @@ -617,6 +628,27 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) > > >> return PTR_ERR(imx6_pcie->iomuxc_gpr); > > >> } > > >> > > >> + /* Grab PCIe PHY Tx Settings */ > > >> + if (of_property_read_u32 > > >> + (node, "fsl,tx-deemph-gen1", &imx6_pcie->tx_deemph_gen1)) > > >> + imx6_pcie->tx_deemph_gen1 = 0; > > >> + > > >> + if (of_property_read_u32 > > >> + (node, "fsl,tx-deemph-gen2-3p5db", &imx6_pcie->tx_deemph_gen2_3p5db)) > > >> + imx6_pcie->tx_deemph_gen2_3p5db = 0; > > >> + > > >> + if (of_property_read_u32 > > >> + (node, "fsl,tx-deemph-gen2-6db", &imx6_pcie->tx_deemph_gen2_6db)) > > >> + imx6_pcie->tx_deemph_gen2_6db = 20; > > >> + > > >> + if (of_property_read_u32 > > >> + (node, "fsl,tx-swing-full", &imx6_pcie->tx_swing_full)) > > >> + imx6_pcie->tx_swing_full = 127; > > >> + > > >> + if (of_property_read_u32 > > >> + (node, "fsl,tx-swing-low", &imx6_pcie->tx_swing_low)) > > >> + imx6_pcie->tx_swing_low = 127; > > >> + > > >> ret = imx6_add_pcie_port(pp, pdev); > > >> if (ret < 0) > > >> return ret; > > >> -- > > >> 2.5.0 > > >> > > >> -- > > >> To unsubscribe from this list: send the line "unsubscribe linux-pci" in > > >> the body of a message to majordomo@vger.kernel.org > > >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-pci" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- > To unsubscribe from this list: send the line "unsubscribe linux-pci" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Jan 15, 2016 at 10:24:35AM -0500, Justin Waters wrote: > The settings in GPR8 are dependent upon the particular layout of the > hardware platform. As such, they should be configurable via the device > tree. > > As many boards have been using the default values, this implementation > uses the old values if they are not specified in the device tree. > > Signed-off-by: Justin Waters <justin.waters@timesys.com> Applied with Lucas' ack to pci/host-imx6 for v4.6, thanks, Justin! > --- > .../devicetree/bindings/pci/fsl,imx6q-pcie.txt | 7 ++++ > drivers/pci/host/pci-imx6.c | 42 +++++++++++++++++++--- > 2 files changed, 44 insertions(+), 5 deletions(-) > > diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > index 6fbba53..3be80c6 100644 > --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > @@ -13,6 +13,13 @@ Required properties: > - clock-names: Must include the following additional entries: > - "pcie_phy" > > +Optional properties: > +- fsl,tx-deemph-gen1: Gen1 De-emphasis value. Default: 0 > +- fsl,tx-deemph-gen2-3p5db: Gen2 (3.5db) De-emphasis value. Default: 0 > +- fsl,tx-deemph-gen2-6db: Gen2 (6db) De-emphasis value. Default: 20 > +- fsl,tx-swing-full: Gen2 TX SWING FULL value. Default: 127 > +- fsl,tx-swing-low: TX launch amplitude swing_low value. Default: 127 > + > Example: > > pcie@0x01000000 { > diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c > index 230ebf9..cc04497 100644 > --- a/drivers/pci/host/pci-imx6.c > +++ b/drivers/pci/host/pci-imx6.c > @@ -39,6 +39,11 @@ struct imx6_pcie { > struct pcie_port pp; > struct regmap *iomuxc_gpr; > void __iomem *mem_base; > + u32 tx_deemph_gen1; > + u32 tx_deemph_gen2_3p5db; > + u32 tx_deemph_gen2_6db; > + u32 tx_swing_full; > + u32 tx_swing_low; > }; > > /* PCIe Root Complex registers (memory-mapped) */ > @@ -317,15 +322,20 @@ static void imx6_pcie_init_phy(struct pcie_port *pp) > IMX6Q_GPR12_LOS_LEVEL, 9 << 4); > > regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, > - IMX6Q_GPR8_TX_DEEMPH_GEN1, 0 << 0); > + IMX6Q_GPR8_TX_DEEMPH_GEN1, > + imx6_pcie->tx_deemph_gen1 << 0); > regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, > - IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, 0 << 6); > + IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, > + imx6_pcie->tx_deemph_gen2_3p5db << 6); > regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, > - IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, 20 << 12); > + IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, > + imx6_pcie->tx_deemph_gen2_6db << 12); > regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, > - IMX6Q_GPR8_TX_SWING_FULL, 127 << 18); > + IMX6Q_GPR8_TX_SWING_FULL, > + imx6_pcie->tx_swing_full << 18); > regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, > - IMX6Q_GPR8_TX_SWING_LOW, 127 << 25); > + IMX6Q_GPR8_TX_SWING_LOW, > + imx6_pcie->tx_swing_low << 25); > } > > static int imx6_pcie_wait_for_link(struct pcie_port *pp) > @@ -565,6 +575,7 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) > struct imx6_pcie *imx6_pcie; > struct pcie_port *pp; > struct resource *dbi_base; > + struct device_node *node = pdev->dev.of_node; > int ret; > > imx6_pcie = devm_kzalloc(&pdev->dev, sizeof(*imx6_pcie), GFP_KERNEL); > @@ -617,6 +628,27 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) > return PTR_ERR(imx6_pcie->iomuxc_gpr); > } > > + /* Grab PCIe PHY Tx Settings */ > + if (of_property_read_u32 > + (node, "fsl,tx-deemph-gen1", &imx6_pcie->tx_deemph_gen1)) > + imx6_pcie->tx_deemph_gen1 = 0; > + > + if (of_property_read_u32 > + (node, "fsl,tx-deemph-gen2-3p5db", &imx6_pcie->tx_deemph_gen2_3p5db)) > + imx6_pcie->tx_deemph_gen2_3p5db = 0; > + > + if (of_property_read_u32 > + (node, "fsl,tx-deemph-gen2-6db", &imx6_pcie->tx_deemph_gen2_6db)) > + imx6_pcie->tx_deemph_gen2_6db = 20; > + > + if (of_property_read_u32 > + (node, "fsl,tx-swing-full", &imx6_pcie->tx_swing_full)) > + imx6_pcie->tx_swing_full = 127; > + > + if (of_property_read_u32 > + (node, "fsl,tx-swing-low", &imx6_pcie->tx_swing_low)) > + imx6_pcie->tx_swing_low = 127; > + > ret = imx6_add_pcie_port(pp, pdev); > if (ret < 0) > return ret; > -- > 2.5.0 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-pci" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt index 6fbba53..3be80c6 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt @@ -13,6 +13,13 @@ Required properties: - clock-names: Must include the following additional entries: - "pcie_phy" +Optional properties: +- fsl,tx-deemph-gen1: Gen1 De-emphasis value. Default: 0 +- fsl,tx-deemph-gen2-3p5db: Gen2 (3.5db) De-emphasis value. Default: 0 +- fsl,tx-deemph-gen2-6db: Gen2 (6db) De-emphasis value. Default: 20 +- fsl,tx-swing-full: Gen2 TX SWING FULL value. Default: 127 +- fsl,tx-swing-low: TX launch amplitude swing_low value. Default: 127 + Example: pcie@0x01000000 { diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c index 230ebf9..cc04497 100644 --- a/drivers/pci/host/pci-imx6.c +++ b/drivers/pci/host/pci-imx6.c @@ -39,6 +39,11 @@ struct imx6_pcie { struct pcie_port pp; struct regmap *iomuxc_gpr; void __iomem *mem_base; + u32 tx_deemph_gen1; + u32 tx_deemph_gen2_3p5db; + u32 tx_deemph_gen2_6db; + u32 tx_swing_full; + u32 tx_swing_low; }; /* PCIe Root Complex registers (memory-mapped) */ @@ -317,15 +322,20 @@ static void imx6_pcie_init_phy(struct pcie_port *pp) IMX6Q_GPR12_LOS_LEVEL, 9 << 4); regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, - IMX6Q_GPR8_TX_DEEMPH_GEN1, 0 << 0); + IMX6Q_GPR8_TX_DEEMPH_GEN1, + imx6_pcie->tx_deemph_gen1 << 0); regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, - IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, 0 << 6); + IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, + imx6_pcie->tx_deemph_gen2_3p5db << 6); regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, - IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, 20 << 12); + IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, + imx6_pcie->tx_deemph_gen2_6db << 12); regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, - IMX6Q_GPR8_TX_SWING_FULL, 127 << 18); + IMX6Q_GPR8_TX_SWING_FULL, + imx6_pcie->tx_swing_full << 18); regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, - IMX6Q_GPR8_TX_SWING_LOW, 127 << 25); + IMX6Q_GPR8_TX_SWING_LOW, + imx6_pcie->tx_swing_low << 25); } static int imx6_pcie_wait_for_link(struct pcie_port *pp) @@ -565,6 +575,7 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) struct imx6_pcie *imx6_pcie; struct pcie_port *pp; struct resource *dbi_base; + struct device_node *node = pdev->dev.of_node; int ret; imx6_pcie = devm_kzalloc(&pdev->dev, sizeof(*imx6_pcie), GFP_KERNEL); @@ -617,6 +628,27 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) return PTR_ERR(imx6_pcie->iomuxc_gpr); } + /* Grab PCIe PHY Tx Settings */ + if (of_property_read_u32 + (node, "fsl,tx-deemph-gen1", &imx6_pcie->tx_deemph_gen1)) + imx6_pcie->tx_deemph_gen1 = 0; + + if (of_property_read_u32 + (node, "fsl,tx-deemph-gen2-3p5db", &imx6_pcie->tx_deemph_gen2_3p5db)) + imx6_pcie->tx_deemph_gen2_3p5db = 0; + + if (of_property_read_u32 + (node, "fsl,tx-deemph-gen2-6db", &imx6_pcie->tx_deemph_gen2_6db)) + imx6_pcie->tx_deemph_gen2_6db = 20; + + if (of_property_read_u32 + (node, "fsl,tx-swing-full", &imx6_pcie->tx_swing_full)) + imx6_pcie->tx_swing_full = 127; + + if (of_property_read_u32 + (node, "fsl,tx-swing-low", &imx6_pcie->tx_swing_low)) + imx6_pcie->tx_swing_low = 127; + ret = imx6_add_pcie_port(pp, pdev); if (ret < 0) return ret;
The settings in GPR8 are dependent upon the particular layout of the hardware platform. As such, they should be configurable via the device tree. As many boards have been using the default values, this implementation uses the old values if they are not specified in the device tree. Signed-off-by: Justin Waters <justin.waters@timesys.com> --- .../devicetree/bindings/pci/fsl,imx6q-pcie.txt | 7 ++++ drivers/pci/host/pci-imx6.c | 42 +++++++++++++++++++--- 2 files changed, 44 insertions(+), 5 deletions(-)