diff mbox

[3/9] netdev: bfin_mac: invalid data cache only once for each new rx skb buffer

Message ID 1273505954-32588-3-git-send-email-vapier@gentoo.org
State Accepted, archived
Delegated to: David Miller
Headers show

Commit Message

Mike Frysinger May 10, 2010, 3:39 p.m. UTC
From: Sonic Zhang <sonic.zhang@analog.com>

The skb buffer isn't actually used until we finish transferring and pass
it up to higher layers, so only invalidate the range once before we start
receiving actual data.  This also avoids the problem with data invalidating
on Blackfin systems -- there is no invalidate-only, just invalidate+flush.
So when running in writeback mode, there is the small (but not uncommon)
possibility of the flush overwriting valid DMA-ed data from the cache.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 drivers/net/bfin_mac.c |   13 ++++++++-----
 1 files changed, 8 insertions(+), 5 deletions(-)

Comments

David Miller May 18, 2010, 12:21 a.m. UTC | #1
From: Mike Frysinger <vapier@gentoo.org>
Date: Mon, 10 May 2010 11:39:08 -0400

> From: Sonic Zhang <sonic.zhang@analog.com>
> 
> The skb buffer isn't actually used until we finish transferring and pass
> it up to higher layers, so only invalidate the range once before we start
> receiving actual data.  This also avoids the problem with data invalidating
> on Blackfin systems -- there is no invalidate-only, just invalidate+flush.
> So when running in writeback mode, there is the small (but not uncommon)
> possibility of the flush overwriting valid DMA-ed data from the cache.
> 
> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
> Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Applied.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index c888465..f9ba598 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -203,6 +203,11 @@  static int desc_list_init(void)
 			goto init_error;
 		}
 		skb_reserve(new_skb, NET_IP_ALIGN);
+		/* Invidate the data cache of skb->data range when it is write back
+		 * cache. It will prevent overwritting the new data from DMA
+		 */
+		blackfin_dcache_invalidate_range((unsigned long)new_skb->head,
+					 (unsigned long)new_skb->end);
 		r->skb = new_skb;
 
 		/*
@@ -1012,19 +1017,17 @@  static void bfin_mac_rx(struct net_device *dev)
 	}
 	/* reserve 2 bytes for RXDWA padding */
 	skb_reserve(new_skb, NET_IP_ALIGN);
-	current_rx_ptr->skb = new_skb;
-	current_rx_ptr->desc_a.start_addr = (unsigned long)new_skb->data - 2;
-
 	/* Invidate the data cache of skb->data range when it is write back
 	 * cache. It will prevent overwritting the new data from DMA
 	 */
 	blackfin_dcache_invalidate_range((unsigned long)new_skb->head,
 					 (unsigned long)new_skb->end);
 
+	current_rx_ptr->skb = new_skb;
+	current_rx_ptr->desc_a.start_addr = (unsigned long)new_skb->data - 2;
+
 	len = (unsigned short)((current_rx_ptr->status.status_word) & RX_FRLEN);
 	skb_put(skb, len);
-	blackfin_dcache_invalidate_range((unsigned long)skb->head,
-					 (unsigned long)skb->tail);
 
 	skb->protocol = eth_type_trans(skb, dev);