Message ID | 20100514102905.7807.27638.stgit@ES-J7S4D2J.amer.consind.ge.com (mailing list archive) |
---|---|
State | Not Applicable |
Delegated to: | Grant Likely |
Headers | show |
Martyn Welch wrote: > Currently the irqs for the i8042, which historically provides keyboard and > mouse (aux) support, is hardwired in the driver rather than parsing the > dts. > > In addition the interrupts are provided in the dts, but in a way that is > not easily parsable using irq_of_parse_and_map(). > > This patch modifies the powerpc legacy IO code to attempt to parse the > device tree for this information, failing back to the hardcoded values if > it fails. For this to succeed the interrupts for the keyboard and mouse > ports need to be moved from the parent i8042 node to the individual port > nodes. > > Signed-off-by: Martyn Welch <martyn.welch@ge.com> > --- > > To get irq_of_parse_and_map() to successfully parse the interrupts, I had > to do this to my device tree: > > @@ -120,16 +120,17 @@ > #address-cells = <1>; > reg = <1 0x60 0x1 > 1 0x64 0x1>; > - interrupts = <1 1 12 1>; > interrupt-parent = <&lpc_pic>; > > keyboard@0 { > reg = <0x0>; > + interrupts = <1 1>; > compatible = "pnpPNP,303"; > }; > > mouse@1 { > reg = <0x1>; > + interrupts = <12 1>; > compatible = "pnpPNP,f03"; > }; > }; > > I'm not sure how to parse for the correct interrupt if I don't do this. I > this is incorrect and someone could advise me on how the existing device > tree layout can be properly parsed, I'll happily modify this patch. > > Grant, any suggestions? (sorry, forgot to CC you) Martyn > arch/powerpc/kernel/setup-common.c | 34 +++++++++++++++++++++++++++++++--- > drivers/input/serio/i8042-io.h | 8 ++++++++ > 2 files changed, 39 insertions(+), 3 deletions(-) > > diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c > index 03dd6a2..9c4dc4c 100644 > --- a/arch/powerpc/kernel/setup-common.c > +++ b/arch/powerpc/kernel/setup-common.c > @@ -93,6 +93,10 @@ struct screen_info screen_info = { > .orig_video_points = 16 > }; > > +/* Variables required to store legacy IO irq routing */ > +int of_i8042_kbd_irq; > +int of_i8042_aux_irq; > + > #ifdef __DO_IRQ_CANON > /* XXX should go elsewhere eventually */ > int ppc_do_canonicalize_irqs; > @@ -555,13 +559,37 @@ void probe_machine(void) > /* Match a class of boards, not a specific device configuration. */ > int check_legacy_ioport(unsigned long base_port) > { > - struct device_node *parent, *np = NULL; > + struct device_node *parent, *np = NULL, *np_aux = NULL; > int ret = -ENODEV; > > switch(base_port) { > case I8042_DATA_REG: > - if (!(np = of_find_compatible_node(NULL, NULL, "pnpPNP,303"))) > - np = of_find_compatible_node(NULL, NULL, "pnpPNP,f03"); > + np = of_find_compatible_node(NULL, NULL, "pnpPNP,303"); > + if (np) { > + /* > + * Attempt to parse DTS for keyboard irq, fallback to > + * standard. > + */ > + of_i8042_kbd_irq = irq_of_parse_and_map(np, 0); > + if (!of_i8042_kbd_irq) > + of_i8042_kbd_irq = 1; > + } > + > + np_aux = of_find_compatible_node(NULL, NULL, "pnpPNP,f03"); > + if (np_aux) { > + if (!np) { > + of_node_put(np); > + np = np_aux; > + } > + /* > + * Attempt to parse DTS for mouse (aux) irq, fallback to > + * standard. > + */ > + of_i8042_aux_irq = irq_of_parse_and_map(np_aux, 0); > + if (!of_i8042_aux_irq) > + of_i8042_aux_irq = 12; > + } > + > if (np) { > parent = of_get_parent(np); > of_node_put(np); > diff --git a/drivers/input/serio/i8042-io.h b/drivers/input/serio/i8042-io.h > index 847f4aa..8fc8753 100644 > --- a/drivers/input/serio/i8042-io.h > +++ b/drivers/input/serio/i8042-io.h > @@ -19,6 +19,11 @@ > * IRQs. > */ > > +#if defined(CONFIG_PPC) > +extern int of_i8042_kbd_irq; > +extern int of_i8042_aux_irq; > +#endif > + > #ifdef __alpha__ > # define I8042_KBD_IRQ 1 > # define I8042_AUX_IRQ (RTC_PORT(0) == 0x170 ? 9 : 12) /* Jensen is special */ > @@ -27,6 +32,9 @@ > #include <asm/irq.h> > #elif defined(CONFIG_SH_CAYMAN) > #include <asm/irq.h> > +#elif defined(CONFIG_PPC) > +#define I8042_KBD_IRQ of_i8042_kbd_irq > +#define I8042_AUX_IRQ of_i8042_aux_irq > #else > # define I8042_KBD_IRQ 1 > # define I8042_AUX_IRQ 12 > > > -- > Martyn Welch (Principal Software Engineer) | Registered in England and > GE Intelligent Platforms | Wales (3828642) at 100 > T +44(0)127322748 | Barbirolli Square, Manchester, > E martyn.welch@ge.com | M2 3AB VAT:GB 927559189 > _______________________________________________ > Linuxppc-dev mailing list > Linuxppc-dev@lists.ozlabs.org > https://lists.ozlabs.org/listinfo/linuxppc-dev >
On Fri, May 14, 2010 at 4:39 AM, Martyn Welch <martyn.welch@ge.com> wrote: > Martyn Welch wrote: >> Currently the irqs for the i8042, which historically provides keyboard and >> mouse (aux) support, is hardwired in the driver rather than parsing the >> dts. >> >> In addition the interrupts are provided in the dts, but in a way that is >> not easily parsable using irq_of_parse_and_map(). >> >> This patch modifies the powerpc legacy IO code to attempt to parse the >> device tree for this information, failing back to the hardcoded values if >> it fails. For this to succeed the interrupts for the keyboard and mouse >> ports need to be moved from the parent i8042 node to the individual port >> nodes. >> >> Signed-off-by: Martyn Welch <martyn.welch@ge.com> >> --- >> >> To get irq_of_parse_and_map() to successfully parse the interrupts, I had >> to do this to my device tree: >> >> @@ -120,16 +120,17 @@ >> #address-cells = <1>; >> reg = <1 0x60 0x1 >> 1 0x64 0x1>; >> - interrupts = <1 1 12 1>; >> interrupt-parent = <&lpc_pic>; >> >> keyboard@0 { >> reg = <0x0>; >> + interrupts = <1 1>; >> compatible = "pnpPNP,303"; >> }; >> >> mouse@1 { >> reg = <0x1>; >> + interrupts = <12 1>; >> compatible = "pnpPNP,f03"; >> }; >> }; >> >> I'm not sure how to parse for the correct interrupt if I don't do this. I >> this is incorrect and someone could advise me on how the existing device >> tree layout can be properly parsed, I'll happily modify this patch. Call of_irq_parse_and_map() on the parent node, using the second parameter to specify if you want the first or second irq. You get the parent node with of_get_parent(). Although looking at this fragment, I don't understand why the i8042 node doesn't have its own compatible property. Maybe there is something historical that I'm missing here. g.
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 03dd6a2..9c4dc4c 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -93,6 +93,10 @@ struct screen_info screen_info = { .orig_video_points = 16 }; +/* Variables required to store legacy IO irq routing */ +int of_i8042_kbd_irq; +int of_i8042_aux_irq; + #ifdef __DO_IRQ_CANON /* XXX should go elsewhere eventually */ int ppc_do_canonicalize_irqs; @@ -555,13 +559,37 @@ void probe_machine(void) /* Match a class of boards, not a specific device configuration. */ int check_legacy_ioport(unsigned long base_port) { - struct device_node *parent, *np = NULL; + struct device_node *parent, *np = NULL, *np_aux = NULL; int ret = -ENODEV; switch(base_port) { case I8042_DATA_REG: - if (!(np = of_find_compatible_node(NULL, NULL, "pnpPNP,303"))) - np = of_find_compatible_node(NULL, NULL, "pnpPNP,f03"); + np = of_find_compatible_node(NULL, NULL, "pnpPNP,303"); + if (np) { + /* + * Attempt to parse DTS for keyboard irq, fallback to + * standard. + */ + of_i8042_kbd_irq = irq_of_parse_and_map(np, 0); + if (!of_i8042_kbd_irq) + of_i8042_kbd_irq = 1; + } + + np_aux = of_find_compatible_node(NULL, NULL, "pnpPNP,f03"); + if (np_aux) { + if (!np) { + of_node_put(np); + np = np_aux; + } + /* + * Attempt to parse DTS for mouse (aux) irq, fallback to + * standard. + */ + of_i8042_aux_irq = irq_of_parse_and_map(np_aux, 0); + if (!of_i8042_aux_irq) + of_i8042_aux_irq = 12; + } + if (np) { parent = of_get_parent(np); of_node_put(np); diff --git a/drivers/input/serio/i8042-io.h b/drivers/input/serio/i8042-io.h index 847f4aa..8fc8753 100644 --- a/drivers/input/serio/i8042-io.h +++ b/drivers/input/serio/i8042-io.h @@ -19,6 +19,11 @@ * IRQs. */ +#if defined(CONFIG_PPC) +extern int of_i8042_kbd_irq; +extern int of_i8042_aux_irq; +#endif + #ifdef __alpha__ # define I8042_KBD_IRQ 1 # define I8042_AUX_IRQ (RTC_PORT(0) == 0x170 ? 9 : 12) /* Jensen is special */ @@ -27,6 +32,9 @@ #include <asm/irq.h> #elif defined(CONFIG_SH_CAYMAN) #include <asm/irq.h> +#elif defined(CONFIG_PPC) +#define I8042_KBD_IRQ of_i8042_kbd_irq +#define I8042_AUX_IRQ of_i8042_aux_irq #else # define I8042_KBD_IRQ 1 # define I8042_AUX_IRQ 12
Currently the irqs for the i8042, which historically provides keyboard and mouse (aux) support, is hardwired in the driver rather than parsing the dts. In addition the interrupts are provided in the dts, but in a way that is not easily parsable using irq_of_parse_and_map(). This patch modifies the powerpc legacy IO code to attempt to parse the device tree for this information, failing back to the hardcoded values if it fails. For this to succeed the interrupts for the keyboard and mouse ports need to be moved from the parent i8042 node to the individual port nodes. Signed-off-by: Martyn Welch <martyn.welch@ge.com> --- To get irq_of_parse_and_map() to successfully parse the interrupts, I had to do this to my device tree: @@ -120,16 +120,17 @@ #address-cells = <1>; reg = <1 0x60 0x1 1 0x64 0x1>; - interrupts = <1 1 12 1>; interrupt-parent = <&lpc_pic>; keyboard@0 { reg = <0x0>; + interrupts = <1 1>; compatible = "pnpPNP,303"; }; mouse@1 { reg = <0x1>; + interrupts = <12 1>; compatible = "pnpPNP,f03"; }; }; I'm not sure how to parse for the correct interrupt if I don't do this. I this is incorrect and someone could advise me on how the existing device tree layout can be properly parsed, I'll happily modify this patch. arch/powerpc/kernel/setup-common.c | 34 +++++++++++++++++++++++++++++++--- drivers/input/serio/i8042-io.h | 8 ++++++++ 2 files changed, 39 insertions(+), 3 deletions(-) -- Martyn Welch (Principal Software Engineer) | Registered in England and GE Intelligent Platforms | Wales (3828642) at 100 T +44(0)127322748 | Barbirolli Square, Manchester, E martyn.welch@ge.com | M2 3AB VAT:GB 927559189