Message ID | 1453938669-7273-3-git-send-email-marex@denx.de |
---|---|
State | RFC |
Delegated to: | Daniel Schwierzeck |
Headers | show |
On Thursday, January 28, 2016 07:51 AM, Marek Vasut wrote: > In order to support boards with ath79 from different vendors and > thus located under /board/$VENDOR/ , we need to define SYS_VENDOR > and SYS_SOC in the board-level Kconfig. Move these two variables > into board-level Kconfig for both ap121 and ap143 boards. > > Signed-off-by: Marek Vasut <marex@denx.de> > Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> > Cc: Wills Wang <wills.wang@live.com> > --- > arch/mips/mach-ath79/Kconfig | 6 ------ > board/ath79/ap121/Kconfig | 6 ++++++ > board/ath79/ap143/Kconfig | 6 ++++++ > 3 files changed, 12 insertions(+), 6 deletions(-) > > diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig > index 95f7de9..8f07a77 100644 > --- a/arch/mips/mach-ath79/Kconfig > +++ b/arch/mips/mach-ath79/Kconfig > @@ -1,12 +1,6 @@ > menu "QCA/Athroes 7xxx/9xxx platforms" > depends on ARCH_ATH79 > > -config SYS_VENDOR > - default "ath79" > - > -config SYS_SOC > - default "ath79" > - > config SOC_AR933X > bool > select SUPPORTS_BIG_ENDIAN > diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig > index ec72914..a4e5690 100644 > --- a/board/ath79/ap121/Kconfig > +++ b/board/ath79/ap121/Kconfig > @@ -1,5 +1,11 @@ > if BOARD_AP121 > > +config SYS_VENDOR > + default "ath79" > + > +config SYS_SOC > + default "ath79" > + > config SYS_BOARD > default "ap121" > > diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig > index 118b9b5..2e54fa7 100644 > --- a/board/ath79/ap143/Kconfig > +++ b/board/ath79/ap143/Kconfig > @@ -1,5 +1,11 @@ > if BOARD_AP143 > > +config SYS_VENDOR > + default "ath79" > + > +config SYS_SOC > + default "ath79" > + > config SYS_BOARD > default "ap143" > I plan to place ap121 and ap143 into board/qca, and then move these into board directory.
On Thursday, January 28, 2016 07:51 AM, Marek Vasut wrote: > In order to support boards with ath79 from different vendors and > thus located under /board/$VENDOR/ , we need to define SYS_VENDOR > and SYS_SOC in the board-level Kconfig. Move these two variables > into board-level Kconfig for both ap121 and ap143 boards. > > Signed-off-by: Marek Vasut <marex@denx.de> > Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> > Cc: Wills Wang <wills.wang@live.com> > --- > arch/mips/mach-ath79/Kconfig | 6 ------ > board/ath79/ap121/Kconfig | 6 ++++++ > board/ath79/ap143/Kconfig | 6 ++++++ > 3 files changed, 12 insertions(+), 6 deletions(-) > > diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig > index 95f7de9..8f07a77 100644 > --- a/arch/mips/mach-ath79/Kconfig > +++ b/arch/mips/mach-ath79/Kconfig > @@ -1,12 +1,6 @@ > menu "QCA/Athroes 7xxx/9xxx platforms" > depends on ARCH_ATH79 > > -config SYS_VENDOR > - default "ath79" > - > -config SYS_SOC > - default "ath79" > - > config SOC_AR933X > bool > select SUPPORTS_BIG_ENDIAN > diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig > index ec72914..a4e5690 100644 > --- a/board/ath79/ap121/Kconfig > +++ b/board/ath79/ap121/Kconfig > @@ -1,5 +1,11 @@ > if BOARD_AP121 > > +config SYS_VENDOR > + default "ath79" > + > +config SYS_SOC > + default "ath79" > + > config SYS_BOARD > default "ap121" > > diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig > index 118b9b5..2e54fa7 100644 > --- a/board/ath79/ap143/Kconfig > +++ b/board/ath79/ap143/Kconfig > @@ -1,5 +1,11 @@ > if BOARD_AP143 > > +config SYS_VENDOR > + default "ath79" > + > +config SYS_SOC > + default "ath79" > + > config SYS_BOARD > default "ap143" > I plan to place ap121 and ap143 into board/qca, and then move these into board directory.
On Thursday, January 28, 2016 at 02:31:11 PM, Wills Wang wrote: > On Thursday, January 28, 2016 07:51 AM, Marek Vasut wrote: > > In order to support boards with ath79 from different vendors and > > thus located under /board/$VENDOR/ , we need to define SYS_VENDOR > > and SYS_SOC in the board-level Kconfig. Move these two variables > > into board-level Kconfig for both ap121 and ap143 boards. > > > > Signed-off-by: Marek Vasut <marex@denx.de> > > Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> > > Cc: Wills Wang <wills.wang@live.com> > > --- > > > > arch/mips/mach-ath79/Kconfig | 6 ------ > > board/ath79/ap121/Kconfig | 6 ++++++ > > board/ath79/ap143/Kconfig | 6 ++++++ > > 3 files changed, 12 insertions(+), 6 deletions(-) > > > > diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig > > index 95f7de9..8f07a77 100644 > > --- a/arch/mips/mach-ath79/Kconfig > > +++ b/arch/mips/mach-ath79/Kconfig > > @@ -1,12 +1,6 @@ > > > > menu "QCA/Athroes 7xxx/9xxx platforms" > > > > depends on ARCH_ATH79 > > > > -config SYS_VENDOR > > - default "ath79" > > - > > -config SYS_SOC > > - default "ath79" > > - > > > > config SOC_AR933X > > > > bool > > select SUPPORTS_BIG_ENDIAN > > > > diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig > > index ec72914..a4e5690 100644 > > --- a/board/ath79/ap121/Kconfig > > +++ b/board/ath79/ap121/Kconfig > > @@ -1,5 +1,11 @@ > > > > if BOARD_AP121 > > > > +config SYS_VENDOR > > + default "ath79" > > + > > +config SYS_SOC > > + default "ath79" > > + > > > > config SYS_BOARD > > > > default "ap121" > > > > diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig > > index 118b9b5..2e54fa7 100644 > > --- a/board/ath79/ap143/Kconfig > > +++ b/board/ath79/ap143/Kconfig > > @@ -1,5 +1,11 @@ > > > > if BOARD_AP143 > > > > +config SYS_VENDOR > > + default "ath79" > > + > > +config SYS_SOC > > + default "ath79" > > + > > > > config SYS_BOARD > > > > default "ap143" > > I plan to place ap121 and ap143 into board/qca, and then > move these into board directory. That's fine, but keep this patch or something along those lines, since I want to create board/arduino/yun/ soon after your stuff is accepted. btw. I got both EHCI and ethernet operational, but I am still struggling with booting the board from the SPI NOR. I think there's something broken in start.S or lowlevel_init.S . Which board do you use for your development and testing ?
On Thursday, January 28, 2016 09:44 PM, Marek Vasut wrote: > On Thursday, January 28, 2016 at 02:31:11 PM, Wills Wang wrote: >> On Thursday, January 28, 2016 07:51 AM, Marek Vasut wrote: >>> In order to support boards with ath79 from different vendors and >>> thus located under /board/$VENDOR/ , we need to define SYS_VENDOR >>> and SYS_SOC in the board-level Kconfig. Move these two variables >>> into board-level Kconfig for both ap121 and ap143 boards. >>> >>> Signed-off-by: Marek Vasut <marex@denx.de> >>> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> >>> Cc: Wills Wang <wills.wang@live.com> >>> --- >>> >>> arch/mips/mach-ath79/Kconfig | 6 ------ >>> board/ath79/ap121/Kconfig | 6 ++++++ >>> board/ath79/ap143/Kconfig | 6 ++++++ >>> 3 files changed, 12 insertions(+), 6 deletions(-) >>> >>> diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig >>> index 95f7de9..8f07a77 100644 >>> --- a/arch/mips/mach-ath79/Kconfig >>> +++ b/arch/mips/mach-ath79/Kconfig >>> @@ -1,12 +1,6 @@ >>> >>> menu "QCA/Athroes 7xxx/9xxx platforms" >>> >>> depends on ARCH_ATH79 >>> >>> -config SYS_VENDOR >>> - default "ath79" >>> - >>> -config SYS_SOC >>> - default "ath79" >>> - >>> >>> config SOC_AR933X >>> >>> bool >>> select SUPPORTS_BIG_ENDIAN >>> >>> diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig >>> index ec72914..a4e5690 100644 >>> --- a/board/ath79/ap121/Kconfig >>> +++ b/board/ath79/ap121/Kconfig >>> @@ -1,5 +1,11 @@ >>> >>> if BOARD_AP121 >>> >>> +config SYS_VENDOR >>> + default "ath79" >>> + >>> +config SYS_SOC >>> + default "ath79" >>> + >>> >>> config SYS_BOARD >>> >>> default "ap121" >>> >>> diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig >>> index 118b9b5..2e54fa7 100644 >>> --- a/board/ath79/ap143/Kconfig >>> +++ b/board/ath79/ap143/Kconfig >>> @@ -1,5 +1,11 @@ >>> >>> if BOARD_AP143 >>> >>> +config SYS_VENDOR >>> + default "ath79" >>> + >>> +config SYS_SOC >>> + default "ath79" >>> + >>> >>> config SYS_BOARD >>> >>> default "ap143" >> I plan to place ap121 and ap143 into board/qca, and then >> move these into board directory. > That's fine, but keep this patch or something along those lines, since > I want to create board/arduino/yun/ soon after your stuff is accepted. > > btw. I got both EHCI and ethernet operational, but I am still struggling > with booting the board from the SPI NOR. I think there's something broken > in start.S or lowlevel_init.S . Which board do you use for your development > and testing ? My private board was made by myself, it originate from AP121, and it's circuit is compatible with AP121.
On Thursday, January 28, 2016 at 03:43:58 PM, Wills Wang wrote: > On Thursday, January 28, 2016 09:44 PM, Marek Vasut wrote: > > On Thursday, January 28, 2016 at 02:31:11 PM, Wills Wang wrote: > >> On Thursday, January 28, 2016 07:51 AM, Marek Vasut wrote: > >>> In order to support boards with ath79 from different vendors and > >>> thus located under /board/$VENDOR/ , we need to define SYS_VENDOR > >>> and SYS_SOC in the board-level Kconfig. Move these two variables > >>> into board-level Kconfig for both ap121 and ap143 boards. > >>> > >>> Signed-off-by: Marek Vasut <marex@denx.de> > >>> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> > >>> Cc: Wills Wang <wills.wang@live.com> > >>> --- > >>> > >>> arch/mips/mach-ath79/Kconfig | 6 ------ > >>> board/ath79/ap121/Kconfig | 6 ++++++ > >>> board/ath79/ap143/Kconfig | 6 ++++++ > >>> 3 files changed, 12 insertions(+), 6 deletions(-) > >>> > >>> diff --git a/arch/mips/mach-ath79/Kconfig > >>> b/arch/mips/mach-ath79/Kconfig index 95f7de9..8f07a77 100644 > >>> --- a/arch/mips/mach-ath79/Kconfig > >>> +++ b/arch/mips/mach-ath79/Kconfig > >>> @@ -1,12 +1,6 @@ > >>> > >>> menu "QCA/Athroes 7xxx/9xxx platforms" > >>> > >>> depends on ARCH_ATH79 > >>> > >>> -config SYS_VENDOR > >>> - default "ath79" > >>> - > >>> -config SYS_SOC > >>> - default "ath79" > >>> - > >>> > >>> config SOC_AR933X > >>> > >>> bool > >>> select SUPPORTS_BIG_ENDIAN > >>> > >>> diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig > >>> index ec72914..a4e5690 100644 > >>> --- a/board/ath79/ap121/Kconfig > >>> +++ b/board/ath79/ap121/Kconfig > >>> @@ -1,5 +1,11 @@ > >>> > >>> if BOARD_AP121 > >>> > >>> +config SYS_VENDOR > >>> + default "ath79" > >>> + > >>> +config SYS_SOC > >>> + default "ath79" > >>> + > >>> > >>> config SYS_BOARD > >>> > >>> default "ap121" > >>> > >>> diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig > >>> index 118b9b5..2e54fa7 100644 > >>> --- a/board/ath79/ap143/Kconfig > >>> +++ b/board/ath79/ap143/Kconfig > >>> @@ -1,5 +1,11 @@ > >>> > >>> if BOARD_AP143 > >>> > >>> +config SYS_VENDOR > >>> + default "ath79" > >>> + > >>> +config SYS_SOC > >>> + default "ath79" > >>> + > >>> > >>> config SYS_BOARD > >>> > >>> default "ap143" > >> > >> I plan to place ap121 and ap143 into board/qca, and then > >> move these into board directory. > > > > That's fine, but keep this patch or something along those lines, since > > I want to create board/arduino/yun/ soon after your stuff is accepted. > > > > btw. I got both EHCI and ethernet operational, but I am still struggling > > with booting the board from the SPI NOR. I think there's something broken > > in start.S or lowlevel_init.S . Which board do you use for your > > development and testing ? > > My private board was made by myself, it originate from AP121, and > it's circuit is compatible with AP121. How do you program your board ? Do you have EJTAG? What SPI NOR do you use?
On Thursday, January 28, 2016 10:53 PM, Marek Vasut wrote: > On Thursday, January 28, 2016 at 03:43:58 PM, Wills Wang wrote: >> On Thursday, January 28, 2016 09:44 PM, Marek Vasut wrote: >>> On Thursday, January 28, 2016 at 02:31:11 PM, Wills Wang wrote: >>>> On Thursday, January 28, 2016 07:51 AM, Marek Vasut wrote: >>>>> In order to support boards with ath79 from different vendors and >>>>> thus located under /board/$VENDOR/ , we need to define SYS_VENDOR >>>>> and SYS_SOC in the board-level Kconfig. Move these two variables >>>>> into board-level Kconfig for both ap121 and ap143 boards. >>>>> >>>>> Signed-off-by: Marek Vasut <marex@denx.de> >>>>> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> >>>>> Cc: Wills Wang <wills.wang@live.com> >>>>> --- >>>>> >>>>> arch/mips/mach-ath79/Kconfig | 6 ------ >>>>> board/ath79/ap121/Kconfig | 6 ++++++ >>>>> board/ath79/ap143/Kconfig | 6 ++++++ >>>>> 3 files changed, 12 insertions(+), 6 deletions(-) >>>>> >>>>> diff --git a/arch/mips/mach-ath79/Kconfig >>>>> b/arch/mips/mach-ath79/Kconfig index 95f7de9..8f07a77 100644 >>>>> --- a/arch/mips/mach-ath79/Kconfig >>>>> +++ b/arch/mips/mach-ath79/Kconfig >>>>> @@ -1,12 +1,6 @@ >>>>> >>>>> menu "QCA/Athroes 7xxx/9xxx platforms" >>>>> >>>>> depends on ARCH_ATH79 >>>>> >>>>> -config SYS_VENDOR >>>>> - default "ath79" >>>>> - >>>>> -config SYS_SOC >>>>> - default "ath79" >>>>> - >>>>> >>>>> config SOC_AR933X >>>>> >>>>> bool >>>>> select SUPPORTS_BIG_ENDIAN >>>>> >>>>> diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig >>>>> index ec72914..a4e5690 100644 >>>>> --- a/board/ath79/ap121/Kconfig >>>>> +++ b/board/ath79/ap121/Kconfig >>>>> @@ -1,5 +1,11 @@ >>>>> >>>>> if BOARD_AP121 >>>>> >>>>> +config SYS_VENDOR >>>>> + default "ath79" >>>>> + >>>>> +config SYS_SOC >>>>> + default "ath79" >>>>> + >>>>> >>>>> config SYS_BOARD >>>>> >>>>> default "ap121" >>>>> >>>>> diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig >>>>> index 118b9b5..2e54fa7 100644 >>>>> --- a/board/ath79/ap143/Kconfig >>>>> +++ b/board/ath79/ap143/Kconfig >>>>> @@ -1,5 +1,11 @@ >>>>> >>>>> if BOARD_AP143 >>>>> >>>>> +config SYS_VENDOR >>>>> + default "ath79" >>>>> + >>>>> +config SYS_SOC >>>>> + default "ath79" >>>>> + >>>>> >>>>> config SYS_BOARD >>>>> >>>>> default "ap143" >>>> I plan to place ap121 and ap143 into board/qca, and then >>>> move these into board directory. >>> That's fine, but keep this patch or something along those lines, since >>> I want to create board/arduino/yun/ soon after your stuff is accepted. >>> >>> btw. I got both EHCI and ethernet operational, but I am still struggling >>> with booting the board from the SPI NOR. I think there's something broken >>> in start.S or lowlevel_init.S . Which board do you use for your >>> development and testing ? >> My private board was made by myself, it originate from AP121, and >> it's circuit is compatible with AP121. > How do you program your board ? Do you have EJTAG? > > What SPI NOR do you use? My flash chip is W25Q64FV. I place a chip socket on board, flash chip can be plugged in or out easily.
On Friday, January 29, 2016 at 09:46:24 AM, Wills Wang wrote: > On Thursday, January 28, 2016 10:53 PM, Marek Vasut wrote: > > On Thursday, January 28, 2016 at 03:43:58 PM, Wills Wang wrote: > >> On Thursday, January 28, 2016 09:44 PM, Marek Vasut wrote: > >>> On Thursday, January 28, 2016 at 02:31:11 PM, Wills Wang wrote: > >>>> On Thursday, January 28, 2016 07:51 AM, Marek Vasut wrote: > >>>>> In order to support boards with ath79 from different vendors and > >>>>> thus located under /board/$VENDOR/ , we need to define SYS_VENDOR > >>>>> and SYS_SOC in the board-level Kconfig. Move these two variables > >>>>> into board-level Kconfig for both ap121 and ap143 boards. > >>>>> > >>>>> Signed-off-by: Marek Vasut <marex@denx.de> > >>>>> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> > >>>>> Cc: Wills Wang <wills.wang@live.com> > >>>>> --- > >>>>> > >>>>> arch/mips/mach-ath79/Kconfig | 6 ------ > >>>>> board/ath79/ap121/Kconfig | 6 ++++++ > >>>>> board/ath79/ap143/Kconfig | 6 ++++++ > >>>>> 3 files changed, 12 insertions(+), 6 deletions(-) > >>>>> > >>>>> diff --git a/arch/mips/mach-ath79/Kconfig > >>>>> b/arch/mips/mach-ath79/Kconfig index 95f7de9..8f07a77 100644 > >>>>> --- a/arch/mips/mach-ath79/Kconfig > >>>>> +++ b/arch/mips/mach-ath79/Kconfig > >>>>> @@ -1,12 +1,6 @@ > >>>>> > >>>>> menu "QCA/Athroes 7xxx/9xxx platforms" > >>>>> > >>>>> depends on ARCH_ATH79 > >>>>> > >>>>> -config SYS_VENDOR > >>>>> - default "ath79" > >>>>> - > >>>>> -config SYS_SOC > >>>>> - default "ath79" > >>>>> - > >>>>> > >>>>> config SOC_AR933X > >>>>> > >>>>> bool > >>>>> select SUPPORTS_BIG_ENDIAN > >>>>> > >>>>> diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig > >>>>> index ec72914..a4e5690 100644 > >>>>> --- a/board/ath79/ap121/Kconfig > >>>>> +++ b/board/ath79/ap121/Kconfig > >>>>> @@ -1,5 +1,11 @@ > >>>>> > >>>>> if BOARD_AP121 > >>>>> > >>>>> +config SYS_VENDOR > >>>>> + default "ath79" > >>>>> + > >>>>> +config SYS_SOC > >>>>> + default "ath79" > >>>>> + > >>>>> > >>>>> config SYS_BOARD > >>>>> > >>>>> default "ap121" > >>>>> > >>>>> diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig > >>>>> index 118b9b5..2e54fa7 100644 > >>>>> --- a/board/ath79/ap143/Kconfig > >>>>> +++ b/board/ath79/ap143/Kconfig > >>>>> @@ -1,5 +1,11 @@ > >>>>> > >>>>> if BOARD_AP143 > >>>>> > >>>>> +config SYS_VENDOR > >>>>> + default "ath79" > >>>>> + > >>>>> +config SYS_SOC > >>>>> + default "ath79" > >>>>> + > >>>>> > >>>>> config SYS_BOARD > >>>>> > >>>>> default "ap143" > >>>> > >>>> I plan to place ap121 and ap143 into board/qca, and then > >>>> move these into board directory. > >>> > >>> That's fine, but keep this patch or something along those lines, since > >>> I want to create board/arduino/yun/ soon after your stuff is accepted. > >>> > >>> btw. I got both EHCI and ethernet operational, but I am still > >>> struggling with booting the board from the SPI NOR. I think there's > >>> something broken in start.S or lowlevel_init.S . Which board do you > >>> use for your development and testing ? > >> > >> My private board was made by myself, it originate from AP121, and > >> it's circuit is compatible with AP121. > > > > How do you program your board ? Do you have EJTAG? > > > > What SPI NOR do you use? > > My flash chip is W25Q64FV. > I place a chip socket on board, flash chip can be plugged in or out easily. I see, OK. Just out of sheer curiosity, are you doing the ath79 support as a hobby thing or are you putting out an actual product ? Also, you might want to join the u-boot IRC, it's easier to discuss things in real time. Best regards, Marek Vasut
diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig index 95f7de9..8f07a77 100644 --- a/arch/mips/mach-ath79/Kconfig +++ b/arch/mips/mach-ath79/Kconfig @@ -1,12 +1,6 @@ menu "QCA/Athroes 7xxx/9xxx platforms" depends on ARCH_ATH79 -config SYS_VENDOR - default "ath79" - -config SYS_SOC - default "ath79" - config SOC_AR933X bool select SUPPORTS_BIG_ENDIAN diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig index ec72914..a4e5690 100644 --- a/board/ath79/ap121/Kconfig +++ b/board/ath79/ap121/Kconfig @@ -1,5 +1,11 @@ if BOARD_AP121 +config SYS_VENDOR + default "ath79" + +config SYS_SOC + default "ath79" + config SYS_BOARD default "ap121" diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig index 118b9b5..2e54fa7 100644 --- a/board/ath79/ap143/Kconfig +++ b/board/ath79/ap143/Kconfig @@ -1,5 +1,11 @@ if BOARD_AP143 +config SYS_VENDOR + default "ath79" + +config SYS_SOC + default "ath79" + config SYS_BOARD default "ap143"
In order to support boards with ath79 from different vendors and thus located under /board/$VENDOR/ , we need to define SYS_VENDOR and SYS_SOC in the board-level Kconfig. Move these two variables into board-level Kconfig for both ap121 and ap143 boards. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Wills Wang <wills.wang@live.com> --- arch/mips/mach-ath79/Kconfig | 6 ------ board/ath79/ap121/Kconfig | 6 ++++++ board/ath79/ap143/Kconfig | 6 ++++++ 3 files changed, 12 insertions(+), 6 deletions(-)