| Message ID | 1272525529-18100-1-git-send-email-bryan.wu@canonical.com |
|---|---|
| State | Accepted |
| Delegated to: | Stefan Bader |
| Headers | show |
Folks, Can I get some ACK for this patch? Tim, I believe this time you will ack it, right? Thanks, -Bryan On 04/29/2010 03:18 PM, Bryan Wu wrote: > BugLink: http://bugs.launchpad.net/bugs/559065 > > In fec open/close function, we need to use phy_connect and phy_disconnect > operation before we start/stop phy. Otherwise it will cause system hang. > > Only call fec_enet_mii_probe() in open function, because the first open > action will cause NULL pointer error. > > Signed-off-by: Bryan Wu<bryan.wu@canonical.com> > --- > drivers/net/fec.c | 28 ++++++++++++++++------------ > 1 files changed, 16 insertions(+), 12 deletions(-) > > diff --git a/drivers/net/fec.c b/drivers/net/fec.c > index 2280373..692d3c4 100644 > --- a/drivers/net/fec.c > +++ b/drivers/net/fec.c > @@ -691,6 +691,8 @@ static int fec_enet_mii_probe(struct net_device *dev) > struct phy_device *phy_dev = NULL; > int phy_addr; > > + fep->phy_dev = NULL; > + > /* find the first phy */ > for (phy_addr = 0; phy_addr< PHY_MAX_ADDR; phy_addr++) { > if (fep->mii_bus->phy_map[phy_addr]) { > @@ -721,6 +723,11 @@ static int fec_enet_mii_probe(struct net_device *dev) > fep->link = 0; > fep->full_duplex = 0; > > + printk(KERN_INFO "%s: Freescale FEC PHY driver [%s] " > + "(mii_bus:phy_addr=%s, irq=%d)\n", dev->name, > + fep->phy_dev->drv->name, dev_name(&fep->phy_dev->dev), > + fep->phy_dev->irq); > + > return 0; > } > > @@ -768,13 +775,8 @@ static int fec_enet_mii_init(struct platform_device *pdev) > if (mdiobus_register(fep->mii_bus)) > goto err_out_free_mdio_irq; > > - if (fec_enet_mii_probe(dev) != 0) > - goto err_out_unregister_bus; > - > return 0; > > -err_out_unregister_bus: > - mdiobus_unregister(fep->mii_bus); > err_out_free_mdio_irq: > kfree(fep->mii_bus->irq); > err_out_free_mdiobus: > @@ -928,7 +930,12 @@ fec_enet_open(struct net_device *dev) > if (ret) > return ret; > > - /* schedule a link state check */ > + /* Probe and connect to PHY when open the interface */ > + ret = fec_enet_mii_probe(dev); > + if (ret) { > + fec_enet_free_buffers(dev); > + return ret; > + } > phy_start(fep->phy_dev); > netif_start_queue(dev); > fep->opened = 1; > @@ -942,10 +949,12 @@ fec_enet_close(struct net_device *dev) > > /* Don't know what to do yet. */ > fep->opened = 0; > - phy_stop(fep->phy_dev); > netif_stop_queue(dev); > fec_stop(dev); > > + if (fep->phy_dev) > + phy_disconnect(fep->phy_dev); > + > fec_enet_free_buffers(dev); > clk_disable(fep->clk); > > @@ -1337,11 +1346,6 @@ fec_probe(struct platform_device *pdev) > > clk_disable(fep->clk); > > - printk(KERN_INFO "%s: Freescale FEC PHY driver [%s] " > - "(mii_bus:phy_addr=%s, irq=%d)\n", ndev->name, > - fep->phy_dev->drv->name, dev_name(&fep->phy_dev->dev), > - fep->phy_dev->irq); > - > return 0; > > failed_register:
On 05/05/2010 10:39 AM, Bryan Wu wrote: > Folks, > > Can I get some ACK for this patch? Tim, I believe this time you will ack it, right? > > Thanks, > -Bryan > > On 04/29/2010 03:18 PM, Bryan Wu wrote: >> BugLink: http://bugs.launchpad.net/bugs/559065 >> >> In fec open/close function, we need to use phy_connect and phy_disconnect >> operation before we start/stop phy. Otherwise it will cause system hang. >> >> Only call fec_enet_mii_probe() in open function, because the first open >> action will cause NULL pointer error. >> >> Signed-off-by: Bryan Wu<bryan.wu@canonical.com> >> --- >> drivers/net/fec.c | 28 ++++++++++++++++------------ >> 1 files changed, 16 insertions(+), 12 deletions(-) >> >> diff --git a/drivers/net/fec.c b/drivers/net/fec.c >> index 2280373..692d3c4 100644 >> --- a/drivers/net/fec.c >> +++ b/drivers/net/fec.c >> @@ -691,6 +691,8 @@ static int fec_enet_mii_probe(struct net_device *dev) >> struct phy_device *phy_dev = NULL; >> int phy_addr; >> >> + fep->phy_dev = NULL; >> + >> /* find the first phy */ >> for (phy_addr = 0; phy_addr< PHY_MAX_ADDR; phy_addr++) { >> if (fep->mii_bus->phy_map[phy_addr]) { >> @@ -721,6 +723,11 @@ static int fec_enet_mii_probe(struct net_device *dev) >> fep->link = 0; >> fep->full_duplex = 0; >> >> + printk(KERN_INFO "%s: Freescale FEC PHY driver [%s] " >> + "(mii_bus:phy_addr=%s, irq=%d)\n", dev->name, >> + fep->phy_dev->drv->name, dev_name(&fep->phy_dev->dev), >> + fep->phy_dev->irq); >> + >> return 0; >> } >> >> @@ -768,13 +775,8 @@ static int fec_enet_mii_init(struct platform_device *pdev) >> if (mdiobus_register(fep->mii_bus)) >> goto err_out_free_mdio_irq; >> >> - if (fec_enet_mii_probe(dev) != 0) >> - goto err_out_unregister_bus; >> - >> return 0; >> >> -err_out_unregister_bus: >> - mdiobus_unregister(fep->mii_bus); >> err_out_free_mdio_irq: >> kfree(fep->mii_bus->irq); >> err_out_free_mdiobus: >> @@ -928,7 +930,12 @@ fec_enet_open(struct net_device *dev) >> if (ret) >> return ret; >> >> - /* schedule a link state check */ >> + /* Probe and connect to PHY when open the interface */ >> + ret = fec_enet_mii_probe(dev); >> + if (ret) { >> + fec_enet_free_buffers(dev); >> + return ret; >> + } >> phy_start(fep->phy_dev); >> netif_start_queue(dev); >> fep->opened = 1; >> @@ -942,10 +949,12 @@ fec_enet_close(struct net_device *dev) >> >> /* Don't know what to do yet. */ >> fep->opened = 0; >> - phy_stop(fep->phy_dev); >> netif_stop_queue(dev); >> fec_stop(dev); >> >> + if (fep->phy_dev) >> + phy_disconnect(fep->phy_dev); >> + >> fec_enet_free_buffers(dev); >> clk_disable(fep->clk); >> >> @@ -1337,11 +1346,6 @@ fec_probe(struct platform_device *pdev) >> >> clk_disable(fep->clk); >> >> - printk(KERN_INFO "%s: Freescale FEC PHY driver [%s] " >> - "(mii_bus:phy_addr=%s, irq=%d)\n", ndev->name, >> - fep->phy_dev->drv->name, dev_name(&fep->phy_dev->dev), >> - fep->phy_dev->irq); >> - >> return 0; >> >> failed_register: > > I thought I _did_ ack it once. Just apply the dang thing. It'll either work or it won't. There aren't any corner cases with this. Acked-by: Tim Gardner <tim.gardner@canonical.com>
On Wed, 2010-05-05 at 16:39 +0800, Bryan Wu wrote: > Folks, > > Can I get some ACK for this patch? Tim, I believe this time you will ack it, right? > > Thanks, > -Bryan > > On 04/29/2010 03:18 PM, Bryan Wu wrote: > > BugLink: http://bugs.launchpad.net/bugs/559065 > > > > In fec open/close function, we need to use phy_connect and phy_disconnect > > operation before we start/stop phy. Otherwise it will cause system hang. > > > > Only call fec_enet_mii_probe() in open function, because the first open > > action will cause NULL pointer error. > > > > Signed-off-by: Bryan Wu<bryan.wu@canonical.com> > > --- > > drivers/net/fec.c | 28 ++++++++++++++++------------ > > 1 files changed, 16 insertions(+), 12 deletions(-) > > > > diff --git a/drivers/net/fec.c b/drivers/net/fec.c > > index 2280373..692d3c4 100644 > > --- a/drivers/net/fec.c > > +++ b/drivers/net/fec.c > > @@ -691,6 +691,8 @@ static int fec_enet_mii_probe(struct net_device *dev) > > struct phy_device *phy_dev = NULL; > > int phy_addr; > > > > + fep->phy_dev = NULL; > > + > > /* find the first phy */ > > for (phy_addr = 0; phy_addr< PHY_MAX_ADDR; phy_addr++) { > > if (fep->mii_bus->phy_map[phy_addr]) { > > @@ -721,6 +723,11 @@ static int fec_enet_mii_probe(struct net_device *dev) > > fep->link = 0; > > fep->full_duplex = 0; > > > > + printk(KERN_INFO "%s: Freescale FEC PHY driver [%s] " > > + "(mii_bus:phy_addr=%s, irq=%d)\n", dev->name, > > + fep->phy_dev->drv->name, dev_name(&fep->phy_dev->dev), > > + fep->phy_dev->irq); > > + > > return 0; > > } > > > > @@ -768,13 +775,8 @@ static int fec_enet_mii_init(struct platform_device *pdev) > > if (mdiobus_register(fep->mii_bus)) > > goto err_out_free_mdio_irq; > > > > - if (fec_enet_mii_probe(dev) != 0) > > - goto err_out_unregister_bus; > > - > > return 0; > > > > -err_out_unregister_bus: > > - mdiobus_unregister(fep->mii_bus); > > err_out_free_mdio_irq: > > kfree(fep->mii_bus->irq); > > err_out_free_mdiobus: > > @@ -928,7 +930,12 @@ fec_enet_open(struct net_device *dev) > > if (ret) > > return ret; > > > > - /* schedule a link state check */ > > + /* Probe and connect to PHY when open the interface */ > > + ret = fec_enet_mii_probe(dev); > > + if (ret) { > > + fec_enet_free_buffers(dev); > > + return ret; > > + } > > phy_start(fep->phy_dev); > > netif_start_queue(dev); > > fep->opened = 1; > > @@ -942,10 +949,12 @@ fec_enet_close(struct net_device *dev) > > > > /* Don't know what to do yet. */ > > fep->opened = 0; > > - phy_stop(fep->phy_dev); > > netif_stop_queue(dev); > > fec_stop(dev); > > > > + if (fep->phy_dev) > > + phy_disconnect(fep->phy_dev); > > + > > fec_enet_free_buffers(dev); > > clk_disable(fep->clk); > > > > @@ -1337,11 +1346,6 @@ fec_probe(struct platform_device *pdev) > > > > clk_disable(fep->clk); > > > > - printk(KERN_INFO "%s: Freescale FEC PHY driver [%s] " > > - "(mii_bus:phy_addr=%s, irq=%d)\n", ndev->name, > > - fep->phy_dev->drv->name, dev_name(&fep->phy_dev->dev), > > - fep->phy_dev->irq); > > - > > return 0; > > > > failed_register: > > Apologies, I recall I asked about removal of phy_stop() and then forgot to act on Bryan's response. Acked-by: Colin King <colin.king@canonical.com>
Applied to Lucid fsl-imx51. Sorry I also forgot about that as it seemed to have open questions. Stefan
diff --git a/drivers/net/fec.c b/drivers/net/fec.c index 2280373..692d3c4 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -691,6 +691,8 @@ static int fec_enet_mii_probe(struct net_device *dev) struct phy_device *phy_dev = NULL; int phy_addr; + fep->phy_dev = NULL; + /* find the first phy */ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { if (fep->mii_bus->phy_map[phy_addr]) { @@ -721,6 +723,11 @@ static int fec_enet_mii_probe(struct net_device *dev) fep->link = 0; fep->full_duplex = 0; + printk(KERN_INFO "%s: Freescale FEC PHY driver [%s] " + "(mii_bus:phy_addr=%s, irq=%d)\n", dev->name, + fep->phy_dev->drv->name, dev_name(&fep->phy_dev->dev), + fep->phy_dev->irq); + return 0; } @@ -768,13 +775,8 @@ static int fec_enet_mii_init(struct platform_device *pdev) if (mdiobus_register(fep->mii_bus)) goto err_out_free_mdio_irq; - if (fec_enet_mii_probe(dev) != 0) - goto err_out_unregister_bus; - return 0; -err_out_unregister_bus: - mdiobus_unregister(fep->mii_bus); err_out_free_mdio_irq: kfree(fep->mii_bus->irq); err_out_free_mdiobus: @@ -928,7 +930,12 @@ fec_enet_open(struct net_device *dev) if (ret) return ret; - /* schedule a link state check */ + /* Probe and connect to PHY when open the interface */ + ret = fec_enet_mii_probe(dev); + if (ret) { + fec_enet_free_buffers(dev); + return ret; + } phy_start(fep->phy_dev); netif_start_queue(dev); fep->opened = 1; @@ -942,10 +949,12 @@ fec_enet_close(struct net_device *dev) /* Don't know what to do yet. */ fep->opened = 0; - phy_stop(fep->phy_dev); netif_stop_queue(dev); fec_stop(dev); + if (fep->phy_dev) + phy_disconnect(fep->phy_dev); + fec_enet_free_buffers(dev); clk_disable(fep->clk); @@ -1337,11 +1346,6 @@ fec_probe(struct platform_device *pdev) clk_disable(fep->clk); - printk(KERN_INFO "%s: Freescale FEC PHY driver [%s] " - "(mii_bus:phy_addr=%s, irq=%d)\n", ndev->name, - fep->phy_dev->drv->name, dev_name(&fep->phy_dev->dev), - fep->phy_dev->irq); - return 0; failed_register:
BugLink: http://bugs.launchpad.net/bugs/559065 In fec open/close function, we need to use phy_connect and phy_disconnect operation before we start/stop phy. Otherwise it will cause system hang. Only call fec_enet_mii_probe() in open function, because the first open action will cause NULL pointer error. Signed-off-by: Bryan Wu <bryan.wu@canonical.com> --- drivers/net/fec.c | 28 ++++++++++++++++------------ 1 files changed, 16 insertions(+), 12 deletions(-)