| Message ID | 1271303822-11542-2-git-send-email-imunsie@au.ibm.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
Ian Munsie wrote: > From: Ian Munsie <imunsie@au.ibm.com> > > The perf userspace tool included some architecture specific code to map > registers from the DWARF register number into the names used by the regs > and stack access API. > > This patch moves the architecture specific code out into a separate > arch/x86 directory along with the infrastructure required to use it. > > Signed-off-by: Ian Munsie <imunsie@au.ibm.com> Good work! Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Thank you very much! > --- > Changes since v2: From Masami Hiramatsu's feedback DWARF support is disabled > altogether if the architecture specific Makefile does not define > PERF_HAVE_DWARF_REGS - ie, DWARF register mappings are missing for the > architecture. A message indicating this is printed out during compilation. > > tools/perf/Makefile | 26 ++++++++++- > tools/perf/arch/x86/Makefile | 2 + > tools/perf/arch/x86/util/dwarf-regs.c | 75 +++++++++++++++++++++++++++++++++ > tools/perf/util/include/dwarf-regs.h | 8 ++++ > tools/perf/util/probe-finder.c | 55 +----------------------- > 5 files changed, 110 insertions(+), 56 deletions(-) > create mode 100644 tools/perf/arch/x86/Makefile > create mode 100644 tools/perf/arch/x86/util/dwarf-regs.c > create mode 100644 tools/perf/util/include/dwarf-regs.h > > diff --git a/tools/perf/Makefile b/tools/perf/Makefile > index 57b3569..269d5dd 100644 > --- a/tools/perf/Makefile > +++ b/tools/perf/Makefile > @@ -173,6 +173,20 @@ uname_R := $(shell sh -c 'uname -r 2>/dev/null || echo not') > uname_P := $(shell sh -c 'uname -p 2>/dev/null || echo not') > uname_V := $(shell sh -c 'uname -v 2>/dev/null || echo not') > > +ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \ > + -e s/arm.*/arm/ -e s/sa110/arm/ \ > + -e s/s390x/s390/ -e s/parisc64/parisc/ \ > + -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \ > + -e s/sh[234].*/sh/ ) > + > +# Additional ARCH settings for x86 > +ifeq ($(ARCH),i386) > + ARCH := x86 > +endif > +ifeq ($(ARCH),x86_64) > + ARCH := x86 > +endif > + > # CFLAGS and LDFLAGS are for the users to override from the command line. > > # > @@ -285,7 +299,7 @@ endif > # Those must not be GNU-specific; they are shared with perl/ which may > # be built by a different compiler. (Note that this is an artifact now > # but it still might be nice to keep that distinction.) > -BASIC_CFLAGS = -Iutil/include > +BASIC_CFLAGS = -Iutil/include -Iarch/$(ARCH)/include > BASIC_LDFLAGS = > > # Guard against environment variables > @@ -367,6 +381,7 @@ LIB_H += util/include/asm/byteorder.h > LIB_H += util/include/asm/swab.h > LIB_H += util/include/asm/system.h > LIB_H += util/include/asm/uaccess.h > +LIB_H += util/include/dwarf-regs.h > LIB_H += perf.h > LIB_H += util/cache.h > LIB_H += util/callchain.h > @@ -485,6 +500,7 @@ PERFLIBS = $(LIB_FILE) > > -include config.mak.autogen > -include config.mak > +-include arch/$(ARCH)/Makefile > > ifeq ($(uname_S),Darwin) > ifndef NO_FINK > @@ -521,12 +537,16 @@ endif > ifneq ($(shell sh -c "(echo '\#include <dwarf.h>'; echo '\#include <libdw.h>'; echo 'int main(void) { Dwarf *dbg; dbg = dwarf_begin(0, DWARF_C_READ); return (long)dbg; }') | $(CC) -x c - $(ALL_CFLAGS) -I/usr/include/elfutils -ldw -lelf -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y) > msg := $(warning No libdw.h found or old libdw.h found, disables dwarf support. Please install elfutils-devel/elfutils-dev); > else > +ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined) > + msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled); > +else > ifndef NO_DWARF > BASIC_CFLAGS += -I/usr/include/elfutils -DDWARF_SUPPORT > EXTLIBS += -lelf -ldw > LIB_OBJS += $(OUTPUT)util/probe-finder.o > -endif > -endif > +endif # NO_DWARF > +endif # PERF_HAVE_DWARF_REGS > +endif # Dwarf support > > ifneq ($(shell sh -c "(echo '\#include <newt.h>'; echo 'int main(void) { newtInit(); newtCls(); return newtFinished(); }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -lnewt -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y) > msg := $(warning newt not found, disables TUI support. Please install newt-devel or libnewt-dev); > diff --git a/tools/perf/arch/x86/Makefile b/tools/perf/arch/x86/Makefile > new file mode 100644 > index 0000000..cbd7833 > --- /dev/null > +++ b/tools/perf/arch/x86/Makefile > @@ -0,0 +1,2 @@ > +PERF_HAVE_DWARF_REGS := 1 > +LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o > diff --git a/tools/perf/arch/x86/util/dwarf-regs.c b/tools/perf/arch/x86/util/dwarf-regs.c > new file mode 100644 > index 0000000..a794d30 > --- /dev/null > +++ b/tools/perf/arch/x86/util/dwarf-regs.c > @@ -0,0 +1,75 @@ > +/* > + * dwarf-regs.c : Mapping of DWARF debug register numbers into register names. > + * Extracted from probe-finder.c > + * > + * Written by Masami Hiramatsu <mhiramat@redhat.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. > + * > + */ > + > +#include <libio.h> > +#include <dwarf-regs.h> > + > +/* > + * Generic dwarf analysis helpers > + */ > + > +#define X86_32_MAX_REGS 8 > +const char *x86_32_regs_table[X86_32_MAX_REGS] = { > + "%ax", > + "%cx", > + "%dx", > + "%bx", > + "$stack", /* Stack address instead of %sp */ > + "%bp", > + "%si", > + "%di", > +}; > + > +#define X86_64_MAX_REGS 16 > +const char *x86_64_regs_table[X86_64_MAX_REGS] = { > + "%ax", > + "%dx", > + "%cx", > + "%bx", > + "%si", > + "%di", > + "%bp", > + "%sp", > + "%r8", > + "%r9", > + "%r10", > + "%r11", > + "%r12", > + "%r13", > + "%r14", > + "%r15", > +}; > + > +/* TODO: switching by dwarf address size */ > +#ifdef __x86_64__ > +#define ARCH_MAX_REGS X86_64_MAX_REGS > +#define arch_regs_table x86_64_regs_table > +#else > +#define ARCH_MAX_REGS X86_32_MAX_REGS > +#define arch_regs_table x86_32_regs_table > +#endif > + > +/* Return architecture dependent register string (for kprobe-tracer) */ > +const char *get_arch_regstr(unsigned int n) > +{ > + return (n <= ARCH_MAX_REGS) ? arch_regs_table[n] : NULL; > +} > diff --git a/tools/perf/util/include/dwarf-regs.h b/tools/perf/util/include/dwarf-regs.h > new file mode 100644 > index 0000000..cf6727e > --- /dev/null > +++ b/tools/perf/util/include/dwarf-regs.h > @@ -0,0 +1,8 @@ > +#ifndef _PERF_DWARF_REGS_H_ > +#define _PERF_DWARF_REGS_H_ > + > +#ifdef DWARF_SUPPORT > +const char *get_arch_regstr(unsigned int n); > +#endif > + > +#endif > diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c > index a851377..83e5bd8 100644 > --- a/tools/perf/util/probe-finder.c > +++ b/tools/perf/util/probe-finder.c > @@ -31,6 +31,7 @@ > #include <string.h> > #include <stdarg.h> > #include <ctype.h> > +#include <dwarf-regs.h> > > #include "string.h" > #include "event.h" > @@ -38,58 +39,6 @@ > #include "util.h" > #include "probe-finder.h" > > - > -/* > - * Generic dwarf analysis helpers > - */ > - > -#define X86_32_MAX_REGS 8 > -const char *x86_32_regs_table[X86_32_MAX_REGS] = { > - "%ax", > - "%cx", > - "%dx", > - "%bx", > - "$stack", /* Stack address instead of %sp */ > - "%bp", > - "%si", > - "%di", > -}; > - > -#define X86_64_MAX_REGS 16 > -const char *x86_64_regs_table[X86_64_MAX_REGS] = { > - "%ax", > - "%dx", > - "%cx", > - "%bx", > - "%si", > - "%di", > - "%bp", > - "%sp", > - "%r8", > - "%r9", > - "%r10", > - "%r11", > - "%r12", > - "%r13", > - "%r14", > - "%r15", > -}; > - > -/* TODO: switching by dwarf address size */ > -#ifdef __x86_64__ > -#define ARCH_MAX_REGS X86_64_MAX_REGS > -#define arch_regs_table x86_64_regs_table > -#else > -#define ARCH_MAX_REGS X86_32_MAX_REGS > -#define arch_regs_table x86_32_regs_table > -#endif > - > -/* Return architecture dependent register string (for kprobe-tracer) */ > -static const char *get_arch_regstr(unsigned int n) > -{ > - return (n <= ARCH_MAX_REGS) ? arch_regs_table[n] : NULL; > -} > - > /* > * Compare the tail of two strings. > * Return 0 if whole of either string is same as another's tail part. > @@ -397,7 +346,7 @@ static void convert_location(Dwarf_Op *op, struct probe_finder *pf) > > regs = get_arch_regstr(regn); > if (!regs) > - die("%u exceeds max register number.", regn); > + die("Mapping for DWARF register number %u missing on this architecture.", regn); > > tvar->value = xstrdup(regs); > if (ref) {
diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 57b3569..269d5dd 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -173,6 +173,20 @@ uname_R := $(shell sh -c 'uname -r 2>/dev/null || echo not') uname_P := $(shell sh -c 'uname -p 2>/dev/null || echo not') uname_V := $(shell sh -c 'uname -v 2>/dev/null || echo not') +ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \ + -e s/arm.*/arm/ -e s/sa110/arm/ \ + -e s/s390x/s390/ -e s/parisc64/parisc/ \ + -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \ + -e s/sh[234].*/sh/ ) + +# Additional ARCH settings for x86 +ifeq ($(ARCH),i386) + ARCH := x86 +endif +ifeq ($(ARCH),x86_64) + ARCH := x86 +endif + # CFLAGS and LDFLAGS are for the users to override from the command line. # @@ -285,7 +299,7 @@ endif # Those must not be GNU-specific; they are shared with perl/ which may # be built by a different compiler. (Note that this is an artifact now # but it still might be nice to keep that distinction.) -BASIC_CFLAGS = -Iutil/include +BASIC_CFLAGS = -Iutil/include -Iarch/$(ARCH)/include BASIC_LDFLAGS = # Guard against environment variables @@ -367,6 +381,7 @@ LIB_H += util/include/asm/byteorder.h LIB_H += util/include/asm/swab.h LIB_H += util/include/asm/system.h LIB_H += util/include/asm/uaccess.h +LIB_H += util/include/dwarf-regs.h LIB_H += perf.h LIB_H += util/cache.h LIB_H += util/callchain.h @@ -485,6 +500,7 @@ PERFLIBS = $(LIB_FILE) -include config.mak.autogen -include config.mak +-include arch/$(ARCH)/Makefile ifeq ($(uname_S),Darwin) ifndef NO_FINK @@ -521,12 +537,16 @@ endif ifneq ($(shell sh -c "(echo '\#include <dwarf.h>'; echo '\#include <libdw.h>'; echo 'int main(void) { Dwarf *dbg; dbg = dwarf_begin(0, DWARF_C_READ); return (long)dbg; }') | $(CC) -x c - $(ALL_CFLAGS) -I/usr/include/elfutils -ldw -lelf -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y) msg := $(warning No libdw.h found or old libdw.h found, disables dwarf support. Please install elfutils-devel/elfutils-dev); else +ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined) + msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled); +else ifndef NO_DWARF BASIC_CFLAGS += -I/usr/include/elfutils -DDWARF_SUPPORT EXTLIBS += -lelf -ldw LIB_OBJS += $(OUTPUT)util/probe-finder.o -endif -endif +endif # NO_DWARF +endif # PERF_HAVE_DWARF_REGS +endif # Dwarf support ifneq ($(shell sh -c "(echo '\#include <newt.h>'; echo 'int main(void) { newtInit(); newtCls(); return newtFinished(); }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -lnewt -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y) msg := $(warning newt not found, disables TUI support. Please install newt-devel or libnewt-dev); diff --git a/tools/perf/arch/x86/Makefile b/tools/perf/arch/x86/Makefile new file mode 100644 index 0000000..cbd7833 --- /dev/null +++ b/tools/perf/arch/x86/Makefile @@ -0,0 +1,2 @@ +PERF_HAVE_DWARF_REGS := 1 +LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o diff --git a/tools/perf/arch/x86/util/dwarf-regs.c b/tools/perf/arch/x86/util/dwarf-regs.c new file mode 100644 index 0000000..a794d30 --- /dev/null +++ b/tools/perf/arch/x86/util/dwarf-regs.c @@ -0,0 +1,75 @@ +/* + * dwarf-regs.c : Mapping of DWARF debug register numbers into register names. + * Extracted from probe-finder.c + * + * Written by Masami Hiramatsu <mhiramat@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <libio.h> +#include <dwarf-regs.h> + +/* + * Generic dwarf analysis helpers + */ + +#define X86_32_MAX_REGS 8 +const char *x86_32_regs_table[X86_32_MAX_REGS] = { + "%ax", + "%cx", + "%dx", + "%bx", + "$stack", /* Stack address instead of %sp */ + "%bp", + "%si", + "%di", +}; + +#define X86_64_MAX_REGS 16 +const char *x86_64_regs_table[X86_64_MAX_REGS] = { + "%ax", + "%dx", + "%cx", + "%bx", + "%si", + "%di", + "%bp", + "%sp", + "%r8", + "%r9", + "%r10", + "%r11", + "%r12", + "%r13", + "%r14", + "%r15", +}; + +/* TODO: switching by dwarf address size */ +#ifdef __x86_64__ +#define ARCH_MAX_REGS X86_64_MAX_REGS +#define arch_regs_table x86_64_regs_table +#else +#define ARCH_MAX_REGS X86_32_MAX_REGS +#define arch_regs_table x86_32_regs_table +#endif + +/* Return architecture dependent register string (for kprobe-tracer) */ +const char *get_arch_regstr(unsigned int n) +{ + return (n <= ARCH_MAX_REGS) ? arch_regs_table[n] : NULL; +} diff --git a/tools/perf/util/include/dwarf-regs.h b/tools/perf/util/include/dwarf-regs.h new file mode 100644 index 0000000..cf6727e --- /dev/null +++ b/tools/perf/util/include/dwarf-regs.h @@ -0,0 +1,8 @@ +#ifndef _PERF_DWARF_REGS_H_ +#define _PERF_DWARF_REGS_H_ + +#ifdef DWARF_SUPPORT +const char *get_arch_regstr(unsigned int n); +#endif + +#endif diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c index a851377..83e5bd8 100644 --- a/tools/perf/util/probe-finder.c +++ b/tools/perf/util/probe-finder.c @@ -31,6 +31,7 @@ #include <string.h> #include <stdarg.h> #include <ctype.h> +#include <dwarf-regs.h> #include "string.h" #include "event.h" @@ -38,58 +39,6 @@ #include "util.h" #include "probe-finder.h" - -/* - * Generic dwarf analysis helpers - */ - -#define X86_32_MAX_REGS 8 -const char *x86_32_regs_table[X86_32_MAX_REGS] = { - "%ax", - "%cx", - "%dx", - "%bx", - "$stack", /* Stack address instead of %sp */ - "%bp", - "%si", - "%di", -}; - -#define X86_64_MAX_REGS 16 -const char *x86_64_regs_table[X86_64_MAX_REGS] = { - "%ax", - "%dx", - "%cx", - "%bx", - "%si", - "%di", - "%bp", - "%sp", - "%r8", - "%r9", - "%r10", - "%r11", - "%r12", - "%r13", - "%r14", - "%r15", -}; - -/* TODO: switching by dwarf address size */ -#ifdef __x86_64__ -#define ARCH_MAX_REGS X86_64_MAX_REGS -#define arch_regs_table x86_64_regs_table -#else -#define ARCH_MAX_REGS X86_32_MAX_REGS -#define arch_regs_table x86_32_regs_table -#endif - -/* Return architecture dependent register string (for kprobe-tracer) */ -static const char *get_arch_regstr(unsigned int n) -{ - return (n <= ARCH_MAX_REGS) ? arch_regs_table[n] : NULL; -} - /* * Compare the tail of two strings. * Return 0 if whole of either string is same as another's tail part. @@ -397,7 +346,7 @@ static void convert_location(Dwarf_Op *op, struct probe_finder *pf) regs = get_arch_regstr(regn); if (!regs) - die("%u exceeds max register number.", regn); + die("Mapping for DWARF register number %u missing on this architecture.", regn); tvar->value = xstrdup(regs); if (ref) {