| Message ID | 1442936337-3104-4-git-send-email-vishnupatekar0510@gmail.com |
|---|---|
| State | New |
| Headers | show |
On Tue, Sep 22, 2015 at 11:38:56PM +0800, Vishnu Patekar wrote: > Allwinner A83T is new octa-core cortex-a7 SOC. > This adds the basic dtsi, the clocks differs from > earlier sun8i SOCs. > > Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> > --- > arch/arm/boot/dts/sun8i-a83t.dtsi | 243 ++++++++++++++++++++++++++++++++++++++ > 1 file changed, 243 insertions(+) > create mode 100644 arch/arm/boot/dts/sun8i-a83t.dtsi > > diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi > new file mode 100644 > index 0000000..f6ddd9c > --- /dev/null > +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi > @@ -0,0 +1,243 @@ > +/* > + * Copyright 2015 Vishnu Patekar > + * > + * Vishnu Patekar <vishnupatekar0510@gmail.com> > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of the > + * License, or (at your option) any later version. > + * > + * This file is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + > + */ > + > +#include "skeleton.dtsi" > + > +#include <dt-bindings/interrupt-controller/arm-gic.h> > + > +#include <dt-bindings/pinctrl/sun4i-a10.h> > + > +/ { > + interrupt-parent = <&gic>; > + > + chosen { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + }; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + cpu@0 { > + compatible = "arm,cortex-a7"; > + device_type = "cpu"; > + reg = <0>; > + }; > + > + cpu@1 { > + compatible = "arm,cortex-a7"; > + device_type = "cpu"; > + reg = <1>; > + }; > + > + cpu@2 { > + compatible = "arm,cortex-a7"; > + device_type = "cpu"; > + reg = <2>; > + }; > + > + cpu@3 { > + compatible = "arm,cortex-a7"; > + device_type = "cpu"; > + reg = <3>; > + }; > + cpu@4 { > + compatible = "arm,cortex-a7"; > + device_type = "cpu"; > + reg = <4>; > + }; > + > + cpu@5 { > + compatible = "arm,cortex-a7"; > + device_type = "cpu"; > + reg = <5>; > + }; > + cpu@6 { > + compatible = "arm,cortex-a7"; > + device_type = "cpu"; > + reg = <6>; > + }; > + > + cpu@7 { > + compatible = "arm,cortex-a7"; > + device_type = "cpu"; > + reg = <7>; > + }; > + }; > + > + memory { > + reg = <0x40000000 0x80000000>; > + }; > + > + timer { > + compatible = "arm,armv7-timer"; > + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; > + clock-frequency = <24000000>; > + arm,cpu-registers-not-fw-configured; > + }; > + > + clocks { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + osc24M: osc24M_clk { > + #clock-cells = <0>; > + compatible = "fixed-clock"; > + clock-frequency = <24000000>; > + clock-output-names = "osc24M"; > + }; > + > + osc32k: osc32k_clk { > + #clock-cells = <0>; > + compatible = "fixed-clock"; > + clock-frequency = <32768>; > + clock-output-names = "osc32k"; > + }; > + }; > + > + soc@01c00000 { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + pio: pinctrl@01c20800 { > + compatible = "allwinner,sun8i-a83t-pinctrl"; > + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; > + /* compatible gets set in SoC specific dtsi file */ Which DTSI? > + reg = <0x01c20800 0x400>; > + /* interrupts get set in SoC specific dtsi file */ Ditto > + clocks = <&osc24M>; > + gpio-controller; > + interrupt-controller; > + #interrupt-cells = <3>; > + #gpio-cells = <3>; > + > + uart0_pins_a: uart0@0 { > + allwinner,pins = "PF2", "PF4"; > + allwinner,function = "uart0"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > + }; > + > + mmc0_pins_a: mmc0@0 { > + allwinner,pins = "PF0", "PF1", "PF2", > + "PF3", "PF4", "PF5"; > + allwinner,function = "mmc0"; > + allwinner,drive = <SUN4I_PINCTRL_30_MA>; > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > + }; > + > + mmc1_pins_a: mmc1@0 { > + allwinner,pins = "PG0", "PG1", "PG2", > + "PG3", "PG4", "PG5"; > + allwinner,function = "mmc1"; > + allwinner,drive = <SUN4I_PINCTRL_30_MA>; > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > + }; > + > + mmc2_8bit_pins: mmc2_8bit { > + allwinner,pins = "PC5", "PC6", "PC8", > + "PC9", "PC10", "PC11", > + "PC12", "PC13", "PC14", > + "PC15"; > + allwinner,function = "mmc2"; > + allwinner,drive = <SUN4I_PINCTRL_30_MA>; > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > + }; > + > + i2c0_pins_a: i2c0@0 { > + allwinner,pins = "PH0", "PH1"; > + allwinner,function = "i2c0"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > + }; > + > + i2c1_pins_a: i2c1@0 { > + allwinner,pins = "PH2", "PH3"; > + allwinner,function = "i2c1"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > + }; > + > + i2c2_pins_a: i2c2@0 { > + allwinner,pins = "PH4", "PH5"; > + allwinner,function = "i2c2"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > + }; Please order those by alphabetical order. > + }; > + > + uart0: serial@01c28000 { > + compatible = "snps,dw-apb-uart"; > + reg = <0x01c28000 0x400>; > + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; > + reg-shift = <2>; > + reg-io-width = <4>; > + clocks = <&osc24M>; > + status = "disabled"; > + }; > + > + gic: interrupt-controller@01c81000 { > + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; > + reg = <0x01c81000 0x1000>, > + <0x01c82000 0x1000>, > + <0x01c84000 0x2000>, > + <0x01c86000 0x2000>; > + interrupt-controller; > + #interrupt-cells = <3>; > + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; > + }; > + > + }; > +}; > -- > 1.9.1 > Thanks! Maxime
On Tue, Sep 22, 2015 at 11:54 PM, Maxime Ripard <maxime.ripard@free-electrons.com> wrote: > On Tue, Sep 22, 2015 at 11:38:56PM +0800, Vishnu Patekar wrote: >> Allwinner A83T is new octa-core cortex-a7 SOC. >> This adds the basic dtsi, the clocks differs from >> earlier sun8i SOCs. >> >> Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> >> --- >> arch/arm/boot/dts/sun8i-a83t.dtsi | 243 ++++++++++++++++++++++++++++++++++++++ >> 1 file changed, 243 insertions(+) >> create mode 100644 arch/arm/boot/dts/sun8i-a83t.dtsi >> >> diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi >> new file mode 100644 >> index 0000000..f6ddd9c >> --- /dev/null >> +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi >> @@ -0,0 +1,243 @@ >> +/* >> + * Copyright 2015 Vishnu Patekar >> + * >> + * Vishnu Patekar <vishnupatekar0510@gmail.com> >> + * >> + * This file is dual-licensed: you can use it either under the terms >> + * of the GPL or the X11 license, at your option. Note that this dual >> + * licensing only applies to this file, and not this project as a >> + * whole. >> + * >> + * a) This file is free software; you can redistribute it and/or >> + * modify it under the terms of the GNU General Public License as >> + * published by the Free Software Foundation; either version 2 of the >> + * License, or (at your option) any later version. >> + * >> + * This file is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * Or, alternatively, >> + * >> + * b) Permission is hereby granted, free of charge, to any person >> + * obtaining a copy of this software and associated documentation >> + * files (the "Software"), to deal in the Software without >> + * restriction, including without limitation the rights to use, >> + * copy, modify, merge, publish, distribute, sublicense, and/or >> + * sell copies of the Software, and to permit persons to whom the >> + * Software is furnished to do so, subject to the following >> + * conditions: >> + * >> + * The above copyright notice and this permission notice shall be >> + * included in all copies or substantial portions of the Software. >> + * >> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, >> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES >> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND >> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT >> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, >> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING >> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR >> + * OTHER DEALINGS IN THE SOFTWARE. >> + >> + */ >> + >> +#include "skeleton.dtsi" >> + >> +#include <dt-bindings/interrupt-controller/arm-gic.h> >> + >> +#include <dt-bindings/pinctrl/sun4i-a10.h> >> + >> +/ { >> + interrupt-parent = <&gic>; >> + >> + chosen { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + }; >> + >> + cpus { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + cpu@0 { >> + compatible = "arm,cortex-a7"; >> + device_type = "cpu"; >> + reg = <0>; >> + }; >> + >> + cpu@1 { >> + compatible = "arm,cortex-a7"; >> + device_type = "cpu"; >> + reg = <1>; >> + }; >> + >> + cpu@2 { >> + compatible = "arm,cortex-a7"; >> + device_type = "cpu"; >> + reg = <2>; >> + }; >> + >> + cpu@3 { >> + compatible = "arm,cortex-a7"; >> + device_type = "cpu"; >> + reg = <3>; >> + }; >> + cpu@4 { >> + compatible = "arm,cortex-a7"; >> + device_type = "cpu"; >> + reg = <4>; These don't look right. See Documentation/devicetree/bindings/arm/cpus.txt Cluster 1 would be 0x100 ~ 0x103. >> + }; >> + >> + cpu@5 { >> + compatible = "arm,cortex-a7"; >> + device_type = "cpu"; >> + reg = <5>; >> + }; >> + cpu@6 { >> + compatible = "arm,cortex-a7"; >> + device_type = "cpu"; >> + reg = <6>; >> + }; >> + >> + cpu@7 { >> + compatible = "arm,cortex-a7"; >> + device_type = "cpu"; >> + reg = <7>; >> + }; >> + }; >> + >> + memory { >> + reg = <0x40000000 0x80000000>; >> + }; >> + >> + timer { >> + compatible = "arm,armv7-timer"; >> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; >> + clock-frequency = <24000000>; >> + arm,cpu-registers-not-fw-configured; >> + }; >> + >> + clocks { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + >> + osc24M: osc24M_clk { >> + #clock-cells = <0>; >> + compatible = "fixed-clock"; >> + clock-frequency = <24000000>; >> + clock-output-names = "osc24M"; >> + }; >> + >> + osc32k: osc32k_clk { >> + #clock-cells = <0>; >> + compatible = "fixed-clock"; >> + clock-frequency = <32768>; >> + clock-output-names = "osc32k"; >> + }; >> + }; >> + >> + soc@01c00000 { >> + compatible = "simple-bus"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + >> + pio: pinctrl@01c20800 { >> + compatible = "allwinner,sun8i-a83t-pinctrl"; >> + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, >> + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, >> + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; >> + /* compatible gets set in SoC specific dtsi file */ > > Which DTSI? > >> + reg = <0x01c20800 0x400>; >> + /* interrupts get set in SoC specific dtsi file */ > > Ditto > >> + clocks = <&osc24M>; >> + gpio-controller; >> + interrupt-controller; >> + #interrupt-cells = <3>; >> + #gpio-cells = <3>; >> + >> + uart0_pins_a: uart0@0 { >> + allwinner,pins = "PF2", "PF4"; >> + allwinner,function = "uart0"; >> + allwinner,drive = <SUN4I_PINCTRL_10_MA>; >> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; >> + }; Could you use PB9 & PB10 for uart0 pins, and not the PF ones? http://linux-sunxi.org/User:Simos/H8HomletProtoV20_A83T shows they are available on the headers, and I tested them before. Thanks! ChenYu >> + >> + mmc0_pins_a: mmc0@0 { >> + allwinner,pins = "PF0", "PF1", "PF2", >> + "PF3", "PF4", "PF5"; >> + allwinner,function = "mmc0"; >> + allwinner,drive = <SUN4I_PINCTRL_30_MA>; >> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; >> + }; >> + >> + mmc1_pins_a: mmc1@0 { >> + allwinner,pins = "PG0", "PG1", "PG2", >> + "PG3", "PG4", "PG5"; >> + allwinner,function = "mmc1"; >> + allwinner,drive = <SUN4I_PINCTRL_30_MA>; >> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; >> + }; >> + >> + mmc2_8bit_pins: mmc2_8bit { >> + allwinner,pins = "PC5", "PC6", "PC8", >> + "PC9", "PC10", "PC11", >> + "PC12", "PC13", "PC14", >> + "PC15"; Would we also want PC16 (SDC2_RST)? >> + allwinner,function = "mmc2"; >> + allwinner,drive = <SUN4I_PINCTRL_30_MA>; >> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; >> + }; >> + >> + i2c0_pins_a: i2c0@0 { >> + allwinner,pins = "PH0", "PH1"; >> + allwinner,function = "i2c0"; >> + allwinner,drive = <SUN4I_PINCTRL_10_MA>; >> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; >> + }; >> + >> + i2c1_pins_a: i2c1@0 { >> + allwinner,pins = "PH2", "PH3"; >> + allwinner,function = "i2c1"; >> + allwinner,drive = <SUN4I_PINCTRL_10_MA>; >> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; >> + }; >> + >> + i2c2_pins_a: i2c2@0 { >> + allwinner,pins = "PH4", "PH5"; >> + allwinner,function = "i2c2"; >> + allwinner,drive = <SUN4I_PINCTRL_10_MA>; >> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; >> + }; > > Please order those by alphabetical order. > >> + }; >> + >> + uart0: serial@01c28000 { >> + compatible = "snps,dw-apb-uart"; >> + reg = <0x01c28000 0x400>; >> + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; >> + reg-shift = <2>; >> + reg-io-width = <4>; >> + clocks = <&osc24M>; >> + status = "disabled"; >> + }; >> + >> + gic: interrupt-controller@01c81000 { >> + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; >> + reg = <0x01c81000 0x1000>, >> + <0x01c82000 0x1000>, >> + <0x01c84000 0x2000>, >> + <0x01c86000 0x2000>; >> + interrupt-controller; >> + #interrupt-cells = <3>; >> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; >> + }; >> + >> + }; >> +}; >> -- >> 1.9.1 >> > > Thanks! > Maxime > > -- > Maxime Ripard, Free Electrons > Embedded Linux, Kernel and Android engineering > http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi new file mode 100644 index 0000000..f6ddd9c --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -0,0 +1,243 @@ +/* + * Copyright 2015 Vishnu Patekar + * + * Vishnu Patekar <vishnupatekar0510@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + + */ + +#include "skeleton.dtsi" + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + interrupt-parent = <&gic>; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + + cpu@2 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <2>; + }; + + cpu@3 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <3>; + }; + cpu@4 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <4>; + }; + + cpu@5 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <5>; + }; + cpu@6 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <6>; + }; + + cpu@7 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <7>; + }; + }; + + memory { + reg = <0x40000000 0x80000000>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <24000000>; + arm,cpu-registers-not-fw-configured; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + }; + + soc@01c00000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pio: pinctrl@01c20800 { + compatible = "allwinner,sun8i-a83t-pinctrl"; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + /* compatible gets set in SoC specific dtsi file */ + reg = <0x01c20800 0x400>; + /* interrupts get set in SoC specific dtsi file */ + clocks = <&osc24M>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <3>; + #gpio-cells = <3>; + + uart0_pins_a: uart0@0 { + allwinner,pins = "PF2", "PF4"; + allwinner,function = "uart0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc1_pins_a: mmc1@0 { + allwinner,pins = "PG0", "PG1", "PG2", + "PG3", "PG4", "PG5"; + allwinner,function = "mmc1"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc2_8bit_pins: mmc2_8bit { + allwinner,pins = "PC5", "PC6", "PC8", + "PC9", "PC10", "PC11", + "PC12", "PC13", "PC14", + "PC15"; + allwinner,function = "mmc2"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PH0", "PH1"; + allwinner,function = "i2c0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PH2", "PH3"; + allwinner,function = "i2c1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PH4", "PH5"; + allwinner,function = "i2c2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + gic: interrupt-controller@01c81000 { + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x1000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + }; +};
Allwinner A83T is new octa-core cortex-a7 SOC. This adds the basic dtsi, the clocks differs from earlier sun8i SOCs. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> --- arch/arm/boot/dts/sun8i-a83t.dtsi | 243 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 243 insertions(+) create mode 100644 arch/arm/boot/dts/sun8i-a83t.dtsi