| Message ID | 20150821103253.GA27466@codeaurora.org |
|---|---|
| State | Superseded, archived |
| Headers | show |
On Fri 21 Aug 03:32 PDT 2015, Varadarajan Narayanan wrote: > Add initial dts files and SoC support for IPQ40XX > > Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> > --- > Changes in v2: > - Added devicetree bindings documentation > > .../devicetree/bindings/clock/qca,gcnt.txt | 14 ++++ > Documentation/devicetree/bindings/ipq.txt | 16 ++++ > arch/arm/boot/dts/Makefile | 3 +- > arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts | 33 +++++++++ > arch/arm/boot/dts/qcom-ipq40xx.dtsi | 86 ++++++++++++++++++++++ > arch/arm/configs/ipq_defconfig | 1 + > arch/arm/mach-qcom/Kconfig | 4 + > arch/arm/mach-qcom/board.c | 1 + > 8 files changed, 157 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/clock/qca,gcnt.txt > create mode 100644 Documentation/devicetree/bindings/ipq.txt > create mode 100644 arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts > create mode 100644 arch/arm/boot/dts/qcom-ipq40xx.dtsi > > diff --git a/Documentation/devicetree/bindings/clock/qca,gcnt.txt b/Documentation/devicetree/bindings/clock/qca,gcnt.txt > new file mode 100644 > index 0000000..dd0d71e > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/qca,gcnt.txt > @@ -0,0 +1,14 @@ > +QCA Global Counter I don't think I've seen the "global counter" blocks before, what is it? What does it do? Do you have a upcoming driver for it? (Have I just missed it?) You add it to the dts below, but don't seem to reference it. What is its purpose? Also, you should split this definition into its own patch. > +------------------------------------------------ > + > +Required properties : > +- compatible : "qcom,qca-gcnt" > + > +- reg : shall contain base register location and length > + > +Example: > + > + counter { > + compatible = "qcom,qca-gcnt"; > + reg = <0x004a1000 0x4>; Most of the time when there's a device consuming one register it turns out to be part of some larger hw block and down the road things get complicated from the fact that we mapped 4 bytes in the middle. Is this part of a larger block? Can we better implement that as a simple-mfd or syscon? > + }; > diff --git a/Documentation/devicetree/bindings/ipq.txt b/Documentation/devicetree/bindings/ipq.txt > new file mode 100644 > index 0000000..7d56bd0 > --- /dev/null > +++ b/Documentation/devicetree/bindings/ipq.txt This doesn't really follow the general pattern of this directory. There are some files like this, but then you should probably name it qualcomm.txt. > @@ -0,0 +1,16 @@ > +Qualcomm IPQ device tree bindings > +--------------------------------- > + > +System on Chip > + > +Device tree must specify which SoC it uses, with one of the > +following compatible strings > + > + "qcom,ipq40xx" > + > +Platform > + > +Device tree must specify which Platform it uses, with one of the > +following compatible strings > + > + "qcom,ipq40xx-r3pc" I would expect an "ipq.txt" to contain "qcom,ipq8064-ap148" and "qcom,ipq8064" as well. > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 246473a..6b4caee 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -477,7 +477,8 @@ dtb-$(CONFIG_ARCH_QCOM) += \ > qcom-ipq8064-ap148.dtb \ > qcom-msm8660-surf.dtb \ > qcom-msm8960-cdp.dtb \ > - qcom-msm8974-sony-xperia-honami.dtb > + qcom-msm8974-sony-xperia-honami.dtb \ > + qcom-ipq40xx-r3pc.dtb Please insert your entry alphabetically. > dtb-$(CONFIG_ARCH_REALVIEW) += \ > arm-realview-pb1176.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += \ > diff --git a/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts b/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts > new file mode 100644 > index 0000000..7e4e629 > --- /dev/null > +++ b/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts > @@ -0,0 +1,33 @@ > +/* Copyright (c) 2014, The Linux Foundation. All rights reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 and > + * only version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include "qcom-ipq40xx.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. IPQ40XX R3PC"; > + compatible = "qcom,ipq40xx-r3pc", "qcom,ipq40xx"; > + > + memory { > + device_type = "memory"; > + reg = <0x80000000 0x20000000>; /* 512MB */ > + }; > + > + chosen { > + bootargs = "root=/dev/ram rw init=/init console=ttyMSM0,115200n8 initrd=0x82000000,0x000E2246"; > + }; > + > + soc { > + serial@78b0000 { > + status = "ok"; > + }; > + }; > +}; This part looks good. > diff --git a/arch/arm/boot/dts/qcom-ipq40xx.dtsi b/arch/arm/boot/dts/qcom-ipq40xx.dtsi > new file mode 100644 > index 0000000..76c55a3 > --- /dev/null > +++ b/arch/arm/boot/dts/qcom-ipq40xx.dtsi > @@ -0,0 +1,86 @@ > +/* > + * Copyright (c) 2014, The Linux Foundation. All rights reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 and > + * only version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +/dts-v1/; > + > +#include "skeleton.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. IPQ40XX"; > + compatible = "qcom,ipq40xx"; > + interrupt-parent = <&intc>; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + cpu@0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a7"; > + reg = <0x0>; > + }; > + > + cpu@1 { > + device_type = "cpu"; > + compatible = "arm,cortex-a7"; > + reg = <0x1>; > + }; > + > + cpu@2 { > + device_type = "cpu"; > + compatible = "arm,cortex-a7"; > + reg = <0x2>; > + }; > + > + cpu@3 { > + device_type = "cpu"; > + compatible = "arm,cortex-a7"; > + reg = <0x3>; > + }; > + }; > + > + soc { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + compatible = "simple-bus"; > + > + intc: interrupt-controller@b000000 { > + compatible = "qcom,msm-qgic2"; > + interrupt-controller; > + #interrupt-cells = <3>; > + reg = <0x0b000000 0x1000>, > + <0x0b002000 0x1000>; > + }; > + > + counter { > + compatible = "qcom,qca-gcnt"; > + reg = <0x004a1000 0x4>; > + }; > + > + timer { > + compatible = "arm,armv7-timer"; > + interrupts = <1 2 0xf08>, > + <1 3 0xf08>, > + <1 4 0xf08>, > + <1 1 0xf08>; > + clock-frequency = <20833333>; > + }; > + > + serial@78b0000 { > + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; > + reg = <0x78b0000 0x200>; > + interrupts = <0 108 0>; > + status = "disabled"; > + }; > + }; > +}; Unless the counter has a critical function I suggest you add that separately, otherwise this looks good. > diff --git a/arch/arm/configs/ipq_defconfig b/arch/arm/configs/ipq_defconfig > index 1cabd8b..054a159 100644 > --- a/arch/arm/configs/ipq_defconfig > +++ b/arch/arm/configs/ipq_defconfig > @@ -22,6 +22,7 @@ CONFIG_ARCH_MSM8X60=y > CONFIG_ARCH_MSM8960=y > CONFIG_ARCH_MSM8974=y > CONFIG_ARCH_IPQ8064=y > +CONFIG_ARCH_IPQ40XX=y > CONFIG_SMP=y > CONFIG_PREEMPT=y > CONFIG_AEABI=y > diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig > index fab49a2..3add9f9 100644 > --- a/arch/arm/mach-qcom/Kconfig > +++ b/arch/arm/mach-qcom/Kconfig > @@ -26,4 +26,8 @@ config ARCH_IPQ8064 > bool "Enable support for IPQ806x" > select CLKSRC_QCOM > > +config ARCH_IPQ40XX > + bool "Enable support for IPQ40XX" > + select HAVE_ARM_ARCH_TIMER > + Please insert your entry alphabetically. > endif > diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c > index 6d8bbf7..566487d 100644 > --- a/arch/arm/mach-qcom/board.c > +++ b/arch/arm/mach-qcom/board.c > @@ -22,6 +22,7 @@ static const char * const qcom_dt_match[] __initconst = { > "qcom,ipq8064", > "qcom,msm8660-surf", > "qcom,msm8960-cdp", > + "qcom,ipq40xx-r3pc", Please add qcom,ipq40xx instead, so that we don't need to list every single device. Also, please keep the list alphabetically sorted. > NULL > }; Regards, Bjorn -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Aug 21, 2015 at 09:21:33AM -0700, Bjorn Andersson wrote: > On Fri 21 Aug 03:32 PDT 2015, Varadarajan Narayanan wrote: > > > Add initial dts files and SoC support for IPQ40XX > > > > Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> > > --- > > Changes in v2: > > - Added devicetree bindings documentation > > > > .../devicetree/bindings/clock/qca,gcnt.txt | 14 ++++ > > Documentation/devicetree/bindings/ipq.txt | 16 ++++ > > arch/arm/boot/dts/Makefile | 3 +- > > arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts | 33 +++++++++ > > arch/arm/boot/dts/qcom-ipq40xx.dtsi | 86 ++++++++++++++++++++++ > > arch/arm/configs/ipq_defconfig | 1 + > > arch/arm/mach-qcom/Kconfig | 4 + > > arch/arm/mach-qcom/board.c | 1 + > > 8 files changed, 157 insertions(+), 1 deletion(-) > > create mode 100644 Documentation/devicetree/bindings/clock/qca,gcnt.txt > > create mode 100644 Documentation/devicetree/bindings/ipq.txt > > create mode 100644 arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts > > create mode 100644 arch/arm/boot/dts/qcom-ipq40xx.dtsi > > > > diff --git a/Documentation/devicetree/bindings/clock/qca,gcnt.txt b/Documentation/devicetree/bindings/clock/qca,gcnt.txt > > new file mode 100644 > > index 0000000..dd0d71e > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/clock/qca,gcnt.txt > > @@ -0,0 +1,14 @@ > > +QCA Global Counter > > I don't think I've seen the "global counter" blocks before, what is it? > What does it do? Do you have a upcoming driver for it? (Have I just > missed it?) It is a 56-bit counter that supplies the count to the ARM arch timers. An upcoming patch will use it. > You add it to the dts below, but don't seem to reference it. What is > its purpose? > > Also, you should split this definition into its own patch. Sure. Will post a revised patch. > > +------------------------------------------------ > > + > > +Required properties : > > +- compatible : "qcom,qca-gcnt" > > + > > +- reg : shall contain base register location and length > > + > > +Example: > > + > > + counter { > > + compatible = "qcom,qca-gcnt"; > > + reg = <0x004a1000 0x4>; > > Most of the time when there's a device consuming one register it turns > out to be part of some larger hw block and down the road things get > complicated from the fact that we mapped 4 bytes in the middle. > > Is this part of a larger block? Can we better implement that as a > simple-mfd or syscon? Sure. Will see if I can re-implement it. > > + }; > > diff --git a/Documentation/devicetree/bindings/ipq.txt b/Documentation/devicetree/bindings/ipq.txt > > new file mode 100644 > > index 0000000..7d56bd0 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/ipq.txt > > This doesn't really follow the general pattern of this directory. There > are some files like this, but then you should probably name it > qualcomm.txt. Will rename. > > @@ -0,0 +1,16 @@ > > +Qualcomm IPQ device tree bindings > > +--------------------------------- > > + > > +System on Chip > > + > > +Device tree must specify which SoC it uses, with one of the > > +following compatible strings > > + > > + "qcom,ipq40xx" > > + > > +Platform > > + > > +Device tree must specify which Platform it uses, with one of the > > +following compatible strings > > + > > + "qcom,ipq40xx-r3pc" > > I would expect an "ipq.txt" to contain "qcom,ipq8064-ap148" and > "qcom,ipq8064" as well. > > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > > index 246473a..6b4caee 100644 > > --- a/arch/arm/boot/dts/Makefile > > +++ b/arch/arm/boot/dts/Makefile > > @@ -477,7 +477,8 @@ dtb-$(CONFIG_ARCH_QCOM) += \ > > qcom-ipq8064-ap148.dtb \ > > qcom-msm8660-surf.dtb \ > > qcom-msm8960-cdp.dtb \ > > - qcom-msm8974-sony-xperia-honami.dtb > > + qcom-msm8974-sony-xperia-honami.dtb \ > > + qcom-ipq40xx-r3pc.dtb > > Please insert your entry alphabetically. Sure. > > dtb-$(CONFIG_ARCH_REALVIEW) += \ > > arm-realview-pb1176.dtb > > dtb-$(CONFIG_ARCH_ROCKCHIP) += \ > > diff --git a/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts b/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts > > new file mode 100644 > > index 0000000..7e4e629 > > --- /dev/null > > +++ b/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts > > @@ -0,0 +1,33 @@ > > +/* Copyright (c) 2014, The Linux Foundation. All rights reserved. > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License version 2 and > > + * only version 2 as published by the Free Software Foundation. > > + * > > + * This program is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + */ > > + > > +#include "qcom-ipq40xx.dtsi" > > + > > +/ { > > + model = "Qualcomm Technologies, Inc. IPQ40XX R3PC"; > > + compatible = "qcom,ipq40xx-r3pc", "qcom,ipq40xx"; > > + > > + memory { > > + device_type = "memory"; > > + reg = <0x80000000 0x20000000>; /* 512MB */ > > + }; > > + > > + chosen { > > + bootargs = "root=/dev/ram rw init=/init console=ttyMSM0,115200n8 initrd=0x82000000,0x000E2246"; > > + }; > > + > > + soc { > > + serial@78b0000 { > > + status = "ok"; > > + }; > > + }; > > +}; > > This part looks good. > > > diff --git a/arch/arm/boot/dts/qcom-ipq40xx.dtsi b/arch/arm/boot/dts/qcom-ipq40xx.dtsi > > new file mode 100644 > > index 0000000..76c55a3 > > --- /dev/null > > +++ b/arch/arm/boot/dts/qcom-ipq40xx.dtsi > > @@ -0,0 +1,86 @@ > > +/* > > + * Copyright (c) 2014, The Linux Foundation. All rights reserved. > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License version 2 and > > + * only version 2 as published by the Free Software Foundation. > > + * > > + * This program is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + */ > > + > > +/dts-v1/; > > + > > +#include "skeleton.dtsi" > > + > > +/ { > > + model = "Qualcomm Technologies, Inc. IPQ40XX"; > > + compatible = "qcom,ipq40xx"; > > + interrupt-parent = <&intc>; > > + > > + cpus { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + cpu@0 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a7"; > > + reg = <0x0>; > > + }; > > + > > + cpu@1 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a7"; > > + reg = <0x1>; > > + }; > > + > > + cpu@2 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a7"; > > + reg = <0x2>; > > + }; > > + > > + cpu@3 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a7"; > > + reg = <0x3>; > > + }; > > + }; > > + > > + soc { > > + #address-cells = <1>; > > + #size-cells = <1>; > > + ranges; > > + compatible = "simple-bus"; > > + > > + intc: interrupt-controller@b000000 { > > + compatible = "qcom,msm-qgic2"; > > + interrupt-controller; > > + #interrupt-cells = <3>; > > + reg = <0x0b000000 0x1000>, > > + <0x0b002000 0x1000>; > > + }; > > + > > + counter { > > + compatible = "qcom,qca-gcnt"; > > + reg = <0x004a1000 0x4>; > > + }; > > + > > + timer { > > + compatible = "arm,armv7-timer"; > > + interrupts = <1 2 0xf08>, > > + <1 3 0xf08>, > > + <1 4 0xf08>, > > + <1 1 0xf08>; > > + clock-frequency = <20833333>; > > + }; > > + > > + serial@78b0000 { > > + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; > > + reg = <0x78b0000 0x200>; > > + interrupts = <0 108 0>; > > + status = "disabled"; > > + }; > > + }; > > +}; > > Unless the counter has a critical function I suggest you add that > separately, otherwise this looks good. Ok > > diff --git a/arch/arm/configs/ipq_defconfig b/arch/arm/configs/ipq_defconfig > > index 1cabd8b..054a159 100644 > > --- a/arch/arm/configs/ipq_defconfig > > +++ b/arch/arm/configs/ipq_defconfig > > @@ -22,6 +22,7 @@ CONFIG_ARCH_MSM8X60=y > > CONFIG_ARCH_MSM8960=y > > CONFIG_ARCH_MSM8974=y > > CONFIG_ARCH_IPQ8064=y > > +CONFIG_ARCH_IPQ40XX=y > > CONFIG_SMP=y > > CONFIG_PREEMPT=y > > CONFIG_AEABI=y > > diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig > > index fab49a2..3add9f9 100644 > > --- a/arch/arm/mach-qcom/Kconfig > > +++ b/arch/arm/mach-qcom/Kconfig > > @@ -26,4 +26,8 @@ config ARCH_IPQ8064 > > bool "Enable support for IPQ806x" > > select CLKSRC_QCOM > > > > +config ARCH_IPQ40XX > > + bool "Enable support for IPQ40XX" > > + select HAVE_ARM_ARCH_TIMER > > + > > Please insert your entry alphabetically. Ok. > > endif > > diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c > > index 6d8bbf7..566487d 100644 > > --- a/arch/arm/mach-qcom/board.c > > +++ b/arch/arm/mach-qcom/board.c > > @@ -22,6 +22,7 @@ static const char * const qcom_dt_match[] __initconst = { > > "qcom,ipq8064", > > "qcom,msm8660-surf", > > "qcom,msm8960-cdp", > > + "qcom,ipq40xx-r3pc", > > Please add qcom,ipq40xx instead, so that we don't need to list every > single device. > > Also, please keep the list alphabetically sorted. Ok. > > NULL > > }; > > Regards, > Bjorn Thanks for your feedback Bjorn. Will re-work and post the patches. Varada -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/clock/qca,gcnt.txt b/Documentation/devicetree/bindings/clock/qca,gcnt.txt new file mode 100644 index 0000000..dd0d71e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qca,gcnt.txt @@ -0,0 +1,14 @@ +QCA Global Counter +------------------------------------------------ + +Required properties : +- compatible : "qcom,qca-gcnt" + +- reg : shall contain base register location and length + +Example: + + counter { + compatible = "qcom,qca-gcnt"; + reg = <0x004a1000 0x4>; + }; diff --git a/Documentation/devicetree/bindings/ipq.txt b/Documentation/devicetree/bindings/ipq.txt new file mode 100644 index 0000000..7d56bd0 --- /dev/null +++ b/Documentation/devicetree/bindings/ipq.txt @@ -0,0 +1,16 @@ +Qualcomm IPQ device tree bindings +--------------------------------- + +System on Chip + +Device tree must specify which SoC it uses, with one of the +following compatible strings + + "qcom,ipq40xx" + +Platform + +Device tree must specify which Platform it uses, with one of the +following compatible strings + + "qcom,ipq40xx-r3pc" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 246473a..6b4caee 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -477,7 +477,8 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq8064-ap148.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ - qcom-msm8974-sony-xperia-honami.dtb + qcom-msm8974-sony-xperia-honami.dtb \ + qcom-ipq40xx-r3pc.dtb dtb-$(CONFIG_ARCH_REALVIEW) += \ arm-realview-pb1176.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ diff --git a/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts b/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts new file mode 100644 index 0000000..7e4e629 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts @@ -0,0 +1,33 @@ +/* Copyright (c) 2014, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "qcom-ipq40xx.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ40XX R3PC"; + compatible = "qcom,ipq40xx-r3pc", "qcom,ipq40xx"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512MB */ + }; + + chosen { + bootargs = "root=/dev/ram rw init=/init console=ttyMSM0,115200n8 initrd=0x82000000,0x000E2246"; + }; + + soc { + serial@78b0000 { + status = "ok"; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq40xx.dtsi b/arch/arm/boot/dts/qcom-ipq40xx.dtsi new file mode 100644 index 0000000..76c55a3 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq40xx.dtsi @@ -0,0 +1,86 @@ +/* + * Copyright (c) 2014, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +#include "skeleton.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ40XX"; + compatible = "qcom,ipq40xx"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x3>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0b000000 0x1000>, + <0x0b002000 0x1000>; + }; + + counter { + compatible = "qcom,qca-gcnt"; + reg = <0x004a1000 0x4>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 2 0xf08>, + <1 3 0xf08>, + <1 4 0xf08>, + <1 1 0xf08>; + clock-frequency = <20833333>; + }; + + serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78b0000 0x200>; + interrupts = <0 108 0>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/configs/ipq_defconfig b/arch/arm/configs/ipq_defconfig index 1cabd8b..054a159 100644 --- a/arch/arm/configs/ipq_defconfig +++ b/arch/arm/configs/ipq_defconfig @@ -22,6 +22,7 @@ CONFIG_ARCH_MSM8X60=y CONFIG_ARCH_MSM8960=y CONFIG_ARCH_MSM8974=y CONFIG_ARCH_IPQ8064=y +CONFIG_ARCH_IPQ40XX=y CONFIG_SMP=y CONFIG_PREEMPT=y CONFIG_AEABI=y diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig index fab49a2..3add9f9 100644 --- a/arch/arm/mach-qcom/Kconfig +++ b/arch/arm/mach-qcom/Kconfig @@ -26,4 +26,8 @@ config ARCH_IPQ8064 bool "Enable support for IPQ806x" select CLKSRC_QCOM +config ARCH_IPQ40XX + bool "Enable support for IPQ40XX" + select HAVE_ARM_ARCH_TIMER + endif diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c index 6d8bbf7..566487d 100644 --- a/arch/arm/mach-qcom/board.c +++ b/arch/arm/mach-qcom/board.c @@ -22,6 +22,7 @@ static const char * const qcom_dt_match[] __initconst = { "qcom,ipq8064", "qcom,msm8660-surf", "qcom,msm8960-cdp", + "qcom,ipq40xx-r3pc", NULL };
Add initial dts files and SoC support for IPQ40XX Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> --- Changes in v2: - Added devicetree bindings documentation .../devicetree/bindings/clock/qca,gcnt.txt | 14 ++++ Documentation/devicetree/bindings/ipq.txt | 16 ++++ arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts | 33 +++++++++ arch/arm/boot/dts/qcom-ipq40xx.dtsi | 86 ++++++++++++++++++++++ arch/arm/configs/ipq_defconfig | 1 + arch/arm/mach-qcom/Kconfig | 4 + arch/arm/mach-qcom/board.c | 1 + 8 files changed, 157 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/clock/qca,gcnt.txt create mode 100644 Documentation/devicetree/bindings/ipq.txt create mode 100644 arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts create mode 100644 arch/arm/boot/dts/qcom-ipq40xx.dtsi