Message ID | 1435078136-22809-7-git-send-email-codrin.ciubotariu@freescale.com |
---|---|
State | Changes Requested |
Headers | show |
Hi Codrin, On Tue, Jun 23, 2015 at 11:48 AM, Codrin Ciubotariu <codrin.ciubotariu@freescale.com> wrote: > The command: > ethsw [port <port_no>] learning { [help] | show | auto | disable } > > can be used to enable/disable HW learning on a port. > > Signed-off-by: Johnson Leung <johnson.leung@freescale.com> > Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> > --- > Changes for v2: > - removed Change-id field; > > drivers/net/vsc9953.c | 188 ++++++++++++++++++++++++++++++++++++++++++++++++++ > include/vsc9953.h | 6 ++ > 2 files changed, 194 insertions(+) > > diff --git a/drivers/net/vsc9953.c b/drivers/net/vsc9953.c > index 62ab0eb..1936c4a 100644 > --- a/drivers/net/vsc9953.c > +++ b/drivers/net/vsc9953.c > @@ -672,6 +672,73 @@ static void vsc9953_port_config_show(int port_no) > printf("%8s\n", duplex == DUPLEX_FULL ? "full" : "half"); > } > > +enum port_learn_mode { > + PORT_LEARN_NONE, > + PORT_LEARN_AUTO > +}; > + > +/* Set learning configuration for a VSC9953 port */ > +static void vsc9953_port_learn_mode_set(int port_no, enum port_learn_mode mode) > +{ > + struct vsc9953_analyzer *l2ana_reg; > + > + /* Administrative down */ > + if (!vsc9953_l2sw.port[port_no].enabled) { > + printf("Port %d is administrative down\n", port_no); > + return; > + } > + > + l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + > + VSC9953_ANA_OFFSET); > + > + switch (mode) { > + case PORT_LEARN_NONE: > + clrbits_le32(&l2ana_reg->port[port_no].port_cfg, > + CONFIG_VSC9953_PORT_CFG_LEARN_DROP | > + CONFIG_VSC9953_PORT_CFG_LEARN_CPU | > + CONFIG_VSC9953_PORT_CFG_LEARN_AUTO | > + CONFIG_VSC9953_PORT_CFG_LEARN_ENA); > + break; > + case PORT_LEARN_AUTO: > + clrsetbits_le32(&l2ana_reg->port[port_no].port_cfg, > + CONFIG_VSC9953_PORT_CFG_LEARN_DROP | > + CONFIG_VSC9953_PORT_CFG_LEARN_CPU, > + CONFIG_VSC9953_PORT_CFG_LEARN_ENA | > + CONFIG_VSC9953_PORT_CFG_LEARN_AUTO); > + break; > + default: > + printf("Unknown learn mode for port %d\n", port_no); > + } > +} > + > +/* Get learning configuration for a VSC9953 port */ > +static int vsc9953_port_learn_mode_get(int port_no, enum port_learn_mode *mode) > +{ > + u32 val; > + struct vsc9953_analyzer *l2ana_reg; > + > + /* Administrative down */ > + if (!vsc9953_l2sw.port[port_no].enabled) { > + printf("Port %d is administrative down\n", port_no); > + return -1; > + } > + > + l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + > + VSC9953_ANA_OFFSET); > + > + /* For now we only support HW learning (auto) and no learning */ > + val = in_le32(&l2ana_reg->port[port_no].port_cfg); > + if ((val & (CONFIG_VSC9953_PORT_CFG_LEARN_ENA | > + CONFIG_VSC9953_PORT_CFG_LEARN_AUTO)) == > + (CONFIG_VSC9953_PORT_CFG_LEARN_ENA | > + CONFIG_VSC9953_PORT_CFG_LEARN_AUTO)) > + *mode = PORT_LEARN_AUTO; > + else > + *mode = PORT_LEARN_NONE; > + > + return 0; > +} > + > /* Show VSC9953 ports' statistics */ > static void vsc9953_port_statistics_show(int port_no) > { > @@ -895,6 +962,8 @@ enum keyword_id { > id_disable, > id_statistics, > id_clear, > + id_learning, > + id_auto, > id_count, /* keep last */ > }; > > @@ -1002,6 +1071,84 @@ static int vsc9953_port_stats_clear_key_func(struct command_def *parsed_cmd) > return 0; > } > > +#define VSC9953_LEARN_HELP "ethsw [port <port_no>] learning " \ > +"{ [help] | show | auto | disable } " \ > +"- enable/disable/show learning configuration on a port" > + > +static int vsc9953_learn_help_key_func(struct command_def *parsed_cmd) > +{ > + printf(VSC9953_LEARN_HELP"\n"); > + > + return 0; Please use: + return CMD_RET_SUCCESS; > +} > + > +static int vsc9953_learn_show_key_func(struct command_def *parsed_cmd) > +{ > + int i; > + enum port_learn_mode mode; > + > + if (parsed_cmd->port != VSC9953_CMD_PORT_ALL) { > + if (vsc9953_port_learn_mode_get(parsed_cmd->port, &mode)) > + return -1; Please use: + return CMD_RET_FAILURE; > + printf("%7s %11s\n", "Port", "Learn mode"); > + switch (mode) { > + case PORT_LEARN_NONE: > + printf("%7d %11s\n", parsed_cmd->port, "disable"); > + break; > + case PORT_LEARN_AUTO: > + printf("%7d %11s\n", parsed_cmd->port, "auto"); > + break; > + default: > + printf("%7d %11s\n", parsed_cmd->port, "-"); > + } > + } else { > + printf("%7s %11s\n", "Port", "Learn mode"); > + for (i = 0; i < VSC9953_MAX_PORTS; i++) { > + if (vsc9953_port_learn_mode_get(i, &mode)) > + continue; > + switch (mode) { > + case PORT_LEARN_NONE: > + printf("%7d %11s\n", i, "disable"); > + break; > + case PORT_LEARN_AUTO: > + printf("%7d %11s\n", i, "auto"); > + break; > + default: > + printf("%7d %11s\n", i, "-"); > + } > + } > + } > + > + return 0; Please use: + return CMD_RET_SUCCESS; > +} > + > +static int vsc9953_learn_set_key_func(struct command_def *parsed_cmd) > +{ > + int i; > + enum port_learn_mode mode; > + > + /* Last keyword should tell us the learn mode */ > + if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == > + id_auto) > + mode = PORT_LEARN_AUTO; > + else if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == > + id_disable) > + mode = PORT_LEARN_NONE; > + else { > + parsed_cmd->err = 1; > + return -1; Please use: + return CMD_RET_USAGE; > + } > + > + if (parsed_cmd->port != VSC9953_CMD_PORT_ALL) { > + vsc9953_port_learn_mode_set(parsed_cmd->port, mode); > + } else { > + for (i = 0; i < VSC9953_MAX_PORTS; i++) > + vsc9953_port_learn_mode_set(i, mode); > + } > + > + return 0; Please use: + return CMD_RET_SUCCESS; > +} > + > struct keywords_to_function { > enum keyword_id cmd_keyword[VSC9953_MAX_CMD_PARAMS]; > int (*keyword_function)(struct command_def *parsed_cmd); > @@ -1044,6 +1191,40 @@ struct keywords_to_function { > id_key_end, > }, > .keyword_function = &vsc9953_port_stats_clear_key_func, > + }, { > + .cmd_keyword = { > + id_learning, > + id_key_end, > + }, > + .keyword_function = &vsc9953_learn_help_key_func, > + }, { > + .cmd_keyword = { > + id_learning, > + id_help, > + id_key_end, > + }, > + .keyword_function = &vsc9953_learn_help_key_func, > + }, { > + .cmd_keyword = { > + id_learning, > + id_show, > + id_key_end, > + }, > + .keyword_function = &vsc9953_learn_show_key_func, > + }, { > + .cmd_keyword = { > + id_learning, > + id_auto, > + id_key_end, > + }, > + .keyword_function = &vsc9953_learn_set_key_func, > + }, { > + .cmd_keyword = { > + id_learning, > + id_disable, > + id_key_end, > + }, > + .keyword_function = &vsc9953_learn_set_key_func, > }, > }; > > @@ -1095,6 +1276,12 @@ struct keyword_def { > }, { > .keyword_name = "clear", > .match = &keyword_match_gen, > + }, { > + .keyword_name = "learning", > + .match = &keyword_match_gen, > + }, { > + .keyword_name = "auto", > + .match = &keyword_match_gen, > }, > }; > > @@ -1273,6 +1460,7 @@ U_BOOT_CMD(ethsw, VSC9953_MAX_CMD_PARAMS, 0, do_ethsw, > "vsc9953 l2 switch commands", > VSC9953_PORT_CONF_HELP"\n" > VSC9953_PORT_STATS_HELP"\n" > + VSC9953_LEARN_HELP"\n" > ); > > #endif /* CONFIG_VSC9953_CMD */ > diff --git a/include/vsc9953.h b/include/vsc9953.h > index 482acac..59c85c3 100644 > --- a/include/vsc9953.h > +++ b/include/vsc9953.h > @@ -112,6 +112,12 @@ > #define CONFIG_VSC9953_VLAN_CMD_WRITE 0x00000002 > #define CONFIG_VSC9953_VLAN_CMD_INIT 0x00000003 > > +/* Macros for vsc9953_ana_port.port_cfg register */ > +#define CONFIG_VSC9953_PORT_CFG_LEARN_ENA 0x00000080 > +#define CONFIG_VSC9953_PORT_CFG_LEARN_AUTO 0x00000100 > +#define CONFIG_VSC9953_PORT_CFG_LEARN_CPU 0x00000200 > +#define CONFIG_VSC9953_PORT_CFG_LEARN_DROP 0x00000400 Drop "CONFIG_" from these. > + > /* Macros for vsc9953_qsys_sys.switch_port_mode register */ > #define CONFIG_VSC9953_PORT_ENA 0x00002000 > > -- > 1.9.3 > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot
Hi Joe, I will make the changes you requested. Thanks and best regards, Codrin > -----Original Message----- > From: Joe Hershberger [mailto:joe.hershberger@gmail.com] > Sent: Friday, June 26, 2015 1:38 AM > To: Ciubotariu Codrin Constantin-B43658 > Cc: u-boot; Joe Hershberger; Sun York-R58495 > Subject: Re: [U-Boot] [PATCH 06/11 v2] drivers/net/vsc9953: Add commands to > enable/disable HW learning
diff --git a/drivers/net/vsc9953.c b/drivers/net/vsc9953.c index 62ab0eb..1936c4a 100644 --- a/drivers/net/vsc9953.c +++ b/drivers/net/vsc9953.c @@ -672,6 +672,73 @@ static void vsc9953_port_config_show(int port_no) printf("%8s\n", duplex == DUPLEX_FULL ? "full" : "half"); } +enum port_learn_mode { + PORT_LEARN_NONE, + PORT_LEARN_AUTO +}; + +/* Set learning configuration for a VSC9953 port */ +static void vsc9953_port_learn_mode_set(int port_no, enum port_learn_mode mode) +{ + struct vsc9953_analyzer *l2ana_reg; + + /* Administrative down */ + if (!vsc9953_l2sw.port[port_no].enabled) { + printf("Port %d is administrative down\n", port_no); + return; + } + + l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + + VSC9953_ANA_OFFSET); + + switch (mode) { + case PORT_LEARN_NONE: + clrbits_le32(&l2ana_reg->port[port_no].port_cfg, + CONFIG_VSC9953_PORT_CFG_LEARN_DROP | + CONFIG_VSC9953_PORT_CFG_LEARN_CPU | + CONFIG_VSC9953_PORT_CFG_LEARN_AUTO | + CONFIG_VSC9953_PORT_CFG_LEARN_ENA); + break; + case PORT_LEARN_AUTO: + clrsetbits_le32(&l2ana_reg->port[port_no].port_cfg, + CONFIG_VSC9953_PORT_CFG_LEARN_DROP | + CONFIG_VSC9953_PORT_CFG_LEARN_CPU, + CONFIG_VSC9953_PORT_CFG_LEARN_ENA | + CONFIG_VSC9953_PORT_CFG_LEARN_AUTO); + break; + default: + printf("Unknown learn mode for port %d\n", port_no); + } +} + +/* Get learning configuration for a VSC9953 port */ +static int vsc9953_port_learn_mode_get(int port_no, enum port_learn_mode *mode) +{ + u32 val; + struct vsc9953_analyzer *l2ana_reg; + + /* Administrative down */ + if (!vsc9953_l2sw.port[port_no].enabled) { + printf("Port %d is administrative down\n", port_no); + return -1; + } + + l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + + VSC9953_ANA_OFFSET); + + /* For now we only support HW learning (auto) and no learning */ + val = in_le32(&l2ana_reg->port[port_no].port_cfg); + if ((val & (CONFIG_VSC9953_PORT_CFG_LEARN_ENA | + CONFIG_VSC9953_PORT_CFG_LEARN_AUTO)) == + (CONFIG_VSC9953_PORT_CFG_LEARN_ENA | + CONFIG_VSC9953_PORT_CFG_LEARN_AUTO)) + *mode = PORT_LEARN_AUTO; + else + *mode = PORT_LEARN_NONE; + + return 0; +} + /* Show VSC9953 ports' statistics */ static void vsc9953_port_statistics_show(int port_no) { @@ -895,6 +962,8 @@ enum keyword_id { id_disable, id_statistics, id_clear, + id_learning, + id_auto, id_count, /* keep last */ }; @@ -1002,6 +1071,84 @@ static int vsc9953_port_stats_clear_key_func(struct command_def *parsed_cmd) return 0; } +#define VSC9953_LEARN_HELP "ethsw [port <port_no>] learning " \ +"{ [help] | show | auto | disable } " \ +"- enable/disable/show learning configuration on a port" + +static int vsc9953_learn_help_key_func(struct command_def *parsed_cmd) +{ + printf(VSC9953_LEARN_HELP"\n"); + + return 0; +} + +static int vsc9953_learn_show_key_func(struct command_def *parsed_cmd) +{ + int i; + enum port_learn_mode mode; + + if (parsed_cmd->port != VSC9953_CMD_PORT_ALL) { + if (vsc9953_port_learn_mode_get(parsed_cmd->port, &mode)) + return -1; + printf("%7s %11s\n", "Port", "Learn mode"); + switch (mode) { + case PORT_LEARN_NONE: + printf("%7d %11s\n", parsed_cmd->port, "disable"); + break; + case PORT_LEARN_AUTO: + printf("%7d %11s\n", parsed_cmd->port, "auto"); + break; + default: + printf("%7d %11s\n", parsed_cmd->port, "-"); + } + } else { + printf("%7s %11s\n", "Port", "Learn mode"); + for (i = 0; i < VSC9953_MAX_PORTS; i++) { + if (vsc9953_port_learn_mode_get(i, &mode)) + continue; + switch (mode) { + case PORT_LEARN_NONE: + printf("%7d %11s\n", i, "disable"); + break; + case PORT_LEARN_AUTO: + printf("%7d %11s\n", i, "auto"); + break; + default: + printf("%7d %11s\n", i, "-"); + } + } + } + + return 0; +} + +static int vsc9953_learn_set_key_func(struct command_def *parsed_cmd) +{ + int i; + enum port_learn_mode mode; + + /* Last keyword should tell us the learn mode */ + if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == + id_auto) + mode = PORT_LEARN_AUTO; + else if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == + id_disable) + mode = PORT_LEARN_NONE; + else { + parsed_cmd->err = 1; + return -1; + } + + if (parsed_cmd->port != VSC9953_CMD_PORT_ALL) { + vsc9953_port_learn_mode_set(parsed_cmd->port, mode); + } else { + for (i = 0; i < VSC9953_MAX_PORTS; i++) + vsc9953_port_learn_mode_set(i, mode); + } + + return 0; +} + struct keywords_to_function { enum keyword_id cmd_keyword[VSC9953_MAX_CMD_PARAMS]; int (*keyword_function)(struct command_def *parsed_cmd); @@ -1044,6 +1191,40 @@ struct keywords_to_function { id_key_end, }, .keyword_function = &vsc9953_port_stats_clear_key_func, + }, { + .cmd_keyword = { + id_learning, + id_key_end, + }, + .keyword_function = &vsc9953_learn_help_key_func, + }, { + .cmd_keyword = { + id_learning, + id_help, + id_key_end, + }, + .keyword_function = &vsc9953_learn_help_key_func, + }, { + .cmd_keyword = { + id_learning, + id_show, + id_key_end, + }, + .keyword_function = &vsc9953_learn_show_key_func, + }, { + .cmd_keyword = { + id_learning, + id_auto, + id_key_end, + }, + .keyword_function = &vsc9953_learn_set_key_func, + }, { + .cmd_keyword = { + id_learning, + id_disable, + id_key_end, + }, + .keyword_function = &vsc9953_learn_set_key_func, }, }; @@ -1095,6 +1276,12 @@ struct keyword_def { }, { .keyword_name = "clear", .match = &keyword_match_gen, + }, { + .keyword_name = "learning", + .match = &keyword_match_gen, + }, { + .keyword_name = "auto", + .match = &keyword_match_gen, }, }; @@ -1273,6 +1460,7 @@ U_BOOT_CMD(ethsw, VSC9953_MAX_CMD_PARAMS, 0, do_ethsw, "vsc9953 l2 switch commands", VSC9953_PORT_CONF_HELP"\n" VSC9953_PORT_STATS_HELP"\n" + VSC9953_LEARN_HELP"\n" ); #endif /* CONFIG_VSC9953_CMD */ diff --git a/include/vsc9953.h b/include/vsc9953.h index 482acac..59c85c3 100644 --- a/include/vsc9953.h +++ b/include/vsc9953.h @@ -112,6 +112,12 @@ #define CONFIG_VSC9953_VLAN_CMD_WRITE 0x00000002 #define CONFIG_VSC9953_VLAN_CMD_INIT 0x00000003 +/* Macros for vsc9953_ana_port.port_cfg register */ +#define CONFIG_VSC9953_PORT_CFG_LEARN_ENA 0x00000080 +#define CONFIG_VSC9953_PORT_CFG_LEARN_AUTO 0x00000100 +#define CONFIG_VSC9953_PORT_CFG_LEARN_CPU 0x00000200 +#define CONFIG_VSC9953_PORT_CFG_LEARN_DROP 0x00000400 + /* Macros for vsc9953_qsys_sys.switch_port_mode register */ #define CONFIG_VSC9953_PORT_ENA 0x00002000