| Message ID | 1434423053-2173-1-git-send-email-hemant@linux.vnet.ibm.com |
|---|---|
| State | New, archived |
| Headers | show |
On 6/15/15 8:50 PM, Hemant Kumar wrote: > +/* > + * Get the instruction pointer from the tracepoint data > + */ > +u64 arch__get_ip(struct perf_evsel *evsel, struct perf_sample *data) > +{ > + u64 tp_ip = data->ip; > + int trap; > + > + if (!strcmp(KVMPPC_EXIT, evsel->name)) { > + trap = raw_field_value(evsel->tp_format, "trap", data->raw_data); > + > + if (trap == HV_DECREMENTER) > + tp_ip = raw_field_value(evsel->tp_format, "pc", > + data->raw_data); > + } > + return tp_ip; > +} You can tie a handler to an event; see builtin-trace.c for example (evsel->handler = handler). Then have the sample handler call it (e.g, see trace__process_sample). Then you don't have to check event names on each pass like this and just do event based processing. > + > +/* > + * Get the HV and PR bits and accordingly, determine the cpumode > + */ > +u8 arch__get_cpumode(union perf_event *event, struct perf_evsel *evsel, > + struct perf_sample *data) > +{ > + unsigned long hv, pr, msr; > + u8 cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK; > + > + if (strcmp(KVMPPC_EXIT, evsel->name)) > + goto ret; > + > + if (data->raw_data) > + msr = raw_field_value(evsel->tp_format, "msr", data->raw_data); > + else > + goto ret; > + > + hv = msr & ((long unsigned)1 << (PPC_MAX - HV_BIT)); > + pr = msr & ((long unsigned)1 << (PPC_MAX - PR_BIT)); > + > + if (!hv && pr) > + cpumode = PERF_RECORD_MISC_GUEST_USER; > + else > + cpumode = PERF_RECORD_MISC_GUEST_KERNEL; > +ret: > + return cpumode; > +} Why isn't that set properly kernel side when the sample is generated? David -- To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Em Tue, Jun 16, 2015 at 08:20:53AM +0530, Hemant Kumar escreveu: > "perf kvm {record|report}" is used to record and report the performance > profile of any workload on a guest. From the host, we can collect > guest kernel statistics which is useful in finding out any contentions > in guest kernel symbols for a certain workload. > > This feature is not available on powerpc because "perf" relies on the > "cycles" event (a PMU event) to profile the guest. However, for powerpc, > this can't be used from the host because the PMUs are controlled by the > guest rather than the host. > > Due to this problem, we need a different approach to profile the > workload in the guest. There exists a tracepoint "kvm_hv:kvm_guest_exit" > in powerpc which is hit whenever any of the threads exit the guest > context. The guest instruction pointer dumped along with this > tracepoint data in the field "pc", can be used as guest instruction > pointer while postprocessing the trace data to map this IP to symbol > from guest.kallsyms. > > However, to have some kind of periodicity, we can't use all the kvm > exits, rather exits which are bound to happen in certain intervals. > HV_DECREMENTER Interrupt forces the threads to exit after an interval > of 10 ms. > > This patch makes use of the "kvm_guest_exit" tracepoint and checks the > exit reason for any kvm exit. If it is HV_DECREMENTER, then the > instruction pointer dumped along with this tracepoint is retrieved and > mapped with the guest kallsyms. > > This patch is a prototype asking for suggestions/comments as to whether > the approach is right or is there any way better than this (like using > a different event to profile for, etc) to profile the guest from the > host. > > Thank You. > > Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com> > --- > tools/perf/arch/powerpc/Makefile | 1 + > tools/perf/arch/powerpc/util/parse-tp.c | 55 +++++++++++++++++++++++++++++++++ > tools/perf/builtin-report.c | 9 ++++++ > tools/perf/util/event.c | 7 ++++- > tools/perf/util/evsel.c | 7 +++++ > tools/perf/util/evsel.h | 4 +++ > tools/perf/util/session.c | 7 +++-- > 7 files changed, 86 insertions(+), 4 deletions(-) > create mode 100644 tools/perf/arch/powerpc/util/parse-tp.c > > diff --git a/tools/perf/arch/powerpc/Makefile b/tools/perf/arch/powerpc/Makefile > index 6f7782b..992a0d5 100644 > --- a/tools/perf/arch/powerpc/Makefile > +++ b/tools/perf/arch/powerpc/Makefile > @@ -4,3 +4,4 @@ LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o > LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/skip-callchain-idx.o > endif > LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/header.o > +LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/parse-tp.o > diff --git a/tools/perf/arch/powerpc/util/parse-tp.c b/tools/perf/arch/powerpc/util/parse-tp.c > new file mode 100644 > index 0000000..4c6e49c > --- /dev/null > +++ b/tools/perf/arch/powerpc/util/parse-tp.c > @@ -0,0 +1,55 @@ > +#include "../../util/evsel.h" > +#include "../../util/trace-event.h" > +#include "../../util/session.h" > + > +#define KVMPPC_EXIT "kvm_hv:kvm_guest_exit" > +#define HV_DECREMENTER 2432 > +#define HV_BIT 3 > +#define PR_BIT 49 > +#define PPC_MAX 63 > + > +/* > + * Get the instruction pointer from the tracepoint data > + */ > +u64 arch__get_ip(struct perf_evsel *evsel, struct perf_sample *data) > +{ > + u64 tp_ip = data->ip; > + int trap; > + > + if (!strcmp(KVMPPC_EXIT, evsel->name)) { Can't you cache this somewhere? I.e. something like static int kvmppc_exit = -1; if (evsel->attr.type != PERF_TRACEPOINT) goto out; if (unlikely(kvmppc_exit == -1)) { if (strcmp(KVMPPC_EXIT, evsel->name))) goto out; kvmppc_exit = evsel->attr.config; } else (if kvmppc_exit != evsel->attr.config) goto out; > + trap = raw_field_value(evsel->tp_format, "trap", data->raw_data); > + > + if (trap == HV_DECREMENTER) > + tp_ip = raw_field_value(evsel->tp_format, "pc", > + data->raw_data); out: > + return tp_ip; > +} Also we have: u64 perf_evsel__intval(struct perf_evsel *evsel, struct perf_sample *sample, const char *name); So: trap = perf_evsel__intval(evsel, sample, "trap"); And: tp_ip = perf_evsel__intval(evsel, sample, "pc"); Makes it a bit shorter and allows for optimizations in how to find that field by name made at the evsel code. - Arnaldo > + > +/* > + * Get the HV and PR bits and accordingly, determine the cpumode > + */ > +u8 arch__get_cpumode(union perf_event *event, struct perf_evsel *evsel, > + struct perf_sample *data) > +{ > + unsigned long hv, pr, msr; > + u8 cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK; > + > + if (strcmp(KVMPPC_EXIT, evsel->name)) > + goto ret; > + > + if (data->raw_data) > + msr = raw_field_value(evsel->tp_format, "msr", data->raw_data); > + else > + goto ret; > + > + hv = msr & ((long unsigned)1 << (PPC_MAX - HV_BIT)); > + pr = msr & ((long unsigned)1 << (PPC_MAX - PR_BIT)); > + > + if (!hv && pr) > + cpumode = PERF_RECORD_MISC_GUEST_USER; > + else > + cpumode = PERF_RECORD_MISC_GUEST_KERNEL; > +ret: > + return cpumode; > +} > diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c > index 072ae8a..e3fe5d0 100644 > --- a/tools/perf/builtin-report.c > +++ b/tools/perf/builtin-report.c > @@ -141,6 +141,13 @@ out: > return err; > } > > +u8 __weak arch__get_cpumode(union perf_event *event, > + __maybe_unused struct perf_evsel *evsel, > + __maybe_unused struct perf_sample *sample) > +{ > + return event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK; > +} > + > static int process_sample_event(struct perf_tool *tool, > union perf_event *event, > struct perf_sample *sample, > @@ -155,6 +162,8 @@ static int process_sample_event(struct perf_tool *tool, > }; > int ret; > > + al.cpumode = arch__get_cpumode(event, evsel, sample); > + Why do it here? Other tools will need this as well, no? I.e. this should be done at perf_event__preprocess_sample(), that receives &al as a return location. Humm, but evsel is not passed to perf_event__preprocess_sample, argh, but yeah, at all perf_event__preprocess_sample() callsites the evsel is already resolved, so we just need to add it to perf_event__preprocess_sample() sig, now that we have a need for it. I.e. this is like a userland fix for older kernels, right? Because other tools will have to do this patching too? > if (perf_event__preprocess_sample(event, machine, &al, sample) < 0) { > pr_debug("problem processing %d event, skipping it.\n", > event->header.type); > diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c > index 6c6d044..693e37c 100644 > --- a/tools/perf/util/event.c > +++ b/tools/perf/util/event.c > @@ -824,9 +824,14 @@ int perf_event__preprocess_sample(const union perf_event *event, > struct addr_location *al, > struct perf_sample *sample) > { > - u8 cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK; > struct thread *thread = machine__findnew_thread(machine, sample->pid, > sample->tid); > + u8 cpumode; > + > + if (al->cpumode != PERF_RECORD_MISC_CPUMODE_UNKNOWN) > + cpumode = al->cpumode; > + else > + cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK; I.e. here, where we should try to avoid looking at anything in 'al'. > > if (thread == NULL) > return -1; > diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c > index 1e90c85..aa4dd49 100644 > --- a/tools/perf/util/evsel.c > +++ b/tools/perf/util/evsel.c > @@ -1281,6 +1281,12 @@ static inline bool overflow(const void *endp, u16 max_size, const void *offset, > #define OVERFLOW_CHECK_u64(offset) \ > OVERFLOW_CHECK(offset, sizeof(u64), sizeof(u64)) > > +u64 __weak arch__get_ip(__maybe_unused struct perf_evsel *evsel, > + __maybe_unused struct perf_sample *data) > +{ > + return data->ip; > +} > + > int perf_evsel__parse_sample(struct perf_evsel *evsel, union perf_event *event, > struct perf_sample *data) > { > @@ -1454,6 +1460,7 @@ int perf_evsel__parse_sample(struct perf_evsel *evsel, union perf_event *event, > OVERFLOW_CHECK(array, data->raw_size, max_size); > data->raw_data = (void *)array; > array = (void *)array + data->raw_size; > + data->ip = arch__get_ip(evsel, data); > } > > if (type & PERF_SAMPLE_BRANCH_STACK) { > diff --git a/tools/perf/util/evsel.h b/tools/perf/util/evsel.h > index 3862274..5c94d64 100644 > --- a/tools/perf/util/evsel.h > +++ b/tools/perf/util/evsel.h > @@ -355,4 +355,8 @@ for ((_evsel) = list_entry((_leader)->node.next, struct perf_evsel, node); \ > (_evsel) && (_evsel)->leader == (_leader); \ > (_evsel) = list_entry((_evsel)->node.next, struct perf_evsel, node)) > > +u64 arch__get_ip(struct perf_evsel *evsel, struct perf_sample *data); > +u8 arch__get_cpumode(union perf_event *event, struct perf_evsel *evsel, > + struct perf_sample *sample); > + > #endif /* __PERF_EVSEL_H */ > diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c > index 5f0e05a..49698cc 100644 > --- a/tools/perf/util/session.c > +++ b/tools/perf/util/session.c > @@ -748,9 +748,10 @@ static void dump_sample(struct perf_evsel *evsel, union perf_event *event, > static struct machine * > perf_session__find_machine_for_cpumode(struct perf_session *session, > union perf_event *event, > - struct perf_sample *sample) > + struct perf_sample *sample, > + struct perf_evsel *evsel) > { > - const u8 cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK; > + u8 cpumode = arch__get_cpumode(event, evsel, sample); > struct machine *machine; > > if (perf_guest && > @@ -856,7 +857,7 @@ int perf_session__deliver_event(struct perf_session *session, > evsel = perf_evlist__id2evsel(session->evlist, sample->id); > > machine = perf_session__find_machine_for_cpumode(session, event, > - sample); > + sample, evsel); > > switch (event->header.type) { > case PERF_RECORD_SAMPLE: > -- > 1.9.3 -- To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi David, Thanks for the review. On 06/16/2015 08:23 PM, David Ahern wrote: > On 6/15/15 8:50 PM, Hemant Kumar wrote: >> +/* >> + * Get the instruction pointer from the tracepoint data >> + */ >> +u64 arch__get_ip(struct perf_evsel *evsel, struct perf_sample *data) >> +{ >> + u64 tp_ip = data->ip; >> + int trap; >> + >> + if (!strcmp(KVMPPC_EXIT, evsel->name)) { >> + trap = raw_field_value(evsel->tp_format, "trap", >> data->raw_data); >> + >> + if (trap == HV_DECREMENTER) >> + tp_ip = raw_field_value(evsel->tp_format, "pc", >> + data->raw_data); >> + } >> + return tp_ip; >> +} > > You can tie a handler to an event; see builtin-trace.c for example > (evsel->handler = handler). Then have the sample handler call it (e.g, > see trace__process_sample). Then you don't have to check event names > on each pass like this and just do event based processing. > >> + >> +/* >> + * Get the HV and PR bits and accordingly, determine the cpumode >> + */ >> +u8 arch__get_cpumode(union perf_event *event, struct perf_evsel *evsel, >> + struct perf_sample *data) >> +{ >> + unsigned long hv, pr, msr; >> + u8 cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK; >> + >> + if (strcmp(KVMPPC_EXIT, evsel->name)) >> + goto ret; >> + >> + if (data->raw_data) >> + msr = raw_field_value(evsel->tp_format, "msr", data->raw_data); >> + else >> + goto ret; >> + >> + hv = msr & ((long unsigned)1 << (PPC_MAX - HV_BIT)); >> + pr = msr & ((long unsigned)1 << (PPC_MAX - PR_BIT)); >> + >> + if (!hv && pr) >> + cpumode = PERF_RECORD_MISC_GUEST_USER; >> + else >> + cpumode = PERF_RECORD_MISC_GUEST_KERNEL; >> +ret: >> + return cpumode; >> +} > > Why isn't that set properly kernel side when the sample is generated? > > Because, this depends on the kernel tracepoint "kvm_hv:kvm_guest_exit". perf_prepare_sample() in the kernel side sets the event->header.misc field to PERF_RECORD_MISC_KERNEL through perf_misc_flags(pt_regs). In case of tracepoints which always get hit in the host kernel context, the perf_misc_flags() will always return PERF_RECORD_MISC_KERNEL. IMHO we will rather have to set the cpumode in the user space for this tracepoint and we can't depend on the event->header.misc field for this case. What would you suggest?
On 6/16/15 7:24 PM, Hemant Kumar wrote: > Because, this depends on the kernel tracepoint "kvm_hv:kvm_guest_exit". > perf_prepare_sample() in the kernel side sets the event->header.misc > field to > PERF_RECORD_MISC_KERNEL through perf_misc_flags(pt_regs). In case of > tracepoints which always get hit in the host kernel context, the > perf_misc_flags() will always return PERF_RECORD_MISC_KERNEL. > > IMHO we will rather have to set the cpumode in the user space for this > tracepoint > and we can't depend on the event->header.misc field for this case. > > What would you suggest? > oh, right you are using a tracepoint for this. It does not have the hooks to specify cpumode. Never mind. -- To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Arnaldo, On 06/16/2015 09:08 PM, Arnaldo Carvalho de Melo wrote: > Em Tue, Jun 16, 2015 at 08:20:53AM +0530, Hemant Kumar escreveu: >> "perf kvm {record|report}" is used to record and report the performance >> profile of any workload on a guest. From the host, we can collect >> guest kernel statistics which is useful in finding out any contentions >> in guest kernel symbols for a certain workload. >> >> This feature is not available on powerpc because "perf" relies on the >> "cycles" event (a PMU event) to profile the guest. However, for powerpc, >> this can't be used from the host because the PMUs are controlled by the >> guest rather than the host. >> >> Due to this problem, we need a different approach to profile the >> workload in the guest. There exists a tracepoint "kvm_hv:kvm_guest_exit" >> in powerpc which is hit whenever any of the threads exit the guest >> context. The guest instruction pointer dumped along with this >> tracepoint data in the field "pc", can be used as guest instruction >> pointer while postprocessing the trace data to map this IP to symbol >> from guest.kallsyms. >> >> However, to have some kind of periodicity, we can't use all the kvm >> exits, rather exits which are bound to happen in certain intervals. >> HV_DECREMENTER Interrupt forces the threads to exit after an interval >> of 10 ms. >> >> This patch makes use of the "kvm_guest_exit" tracepoint and checks the >> exit reason for any kvm exit. If it is HV_DECREMENTER, then the >> instruction pointer dumped along with this tracepoint is retrieved and >> mapped with the guest kallsyms. >> >> This patch is a prototype asking for suggestions/comments as to whether >> the approach is right or is there any way better than this (like using >> a different event to profile for, etc) to profile the guest from the >> host. >> >> Thank You. >> >> Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com> >> --- >> tools/perf/arch/powerpc/Makefile | 1 + >> tools/perf/arch/powerpc/util/parse-tp.c | 55 +++++++++++++++++++++++++++++++++ >> tools/perf/builtin-report.c | 9 ++++++ >> tools/perf/util/event.c | 7 ++++- >> tools/perf/util/evsel.c | 7 +++++ >> tools/perf/util/evsel.h | 4 +++ >> tools/perf/util/session.c | 7 +++-- >> 7 files changed, 86 insertions(+), 4 deletions(-) >> create mode 100644 tools/perf/arch/powerpc/util/parse-tp.c >> >> diff --git a/tools/perf/arch/powerpc/Makefile b/tools/perf/arch/powerpc/Makefile >> index 6f7782b..992a0d5 100644 >> --- a/tools/perf/arch/powerpc/Makefile >> +++ b/tools/perf/arch/powerpc/Makefile >> @@ -4,3 +4,4 @@ LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o >> LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/skip-callchain-idx.o >> endif >> LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/header.o >> +LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/parse-tp.o >> diff --git a/tools/perf/arch/powerpc/util/parse-tp.c b/tools/perf/arch/powerpc/util/parse-tp.c >> new file mode 100644 >> index 0000000..4c6e49c >> --- /dev/null >> +++ b/tools/perf/arch/powerpc/util/parse-tp.c >> @@ -0,0 +1,55 @@ >> +#include "../../util/evsel.h" >> +#include "../../util/trace-event.h" >> +#include "../../util/session.h" >> + >> +#define KVMPPC_EXIT "kvm_hv:kvm_guest_exit" >> +#define HV_DECREMENTER 2432 >> +#define HV_BIT 3 >> +#define PR_BIT 49 >> +#define PPC_MAX 63 >> + >> +/* >> + * Get the instruction pointer from the tracepoint data >> + */ >> +u64 arch__get_ip(struct perf_evsel *evsel, struct perf_sample *data) >> +{ >> + u64 tp_ip = data->ip; >> + int trap; >> + >> + if (!strcmp(KVMPPC_EXIT, evsel->name)) { > Can't you cache this somewhere? I.e. something like > > static int kvmppc_exit = -1; > > if (evsel->attr.type != PERF_TRACEPOINT) > goto out; > > if (unlikely(kvmppc_exit == -1)) { > if (strcmp(KVMPPC_EXIT, evsel->name))) > goto out; > > kvmppc_exit = evsel->attr.config; > } else (if kvmppc_exit != evsel->attr.config) > goto out; Will try this. > >> + trap = raw_field_value(evsel->tp_format, "trap", data->raw_data); >> + >> + if (trap == HV_DECREMENTER) >> + tp_ip = raw_field_value(evsel->tp_format, "pc", >> + data->raw_data); > out: > >> + return tp_ip; >> +} > > Also we have: > > u64 perf_evsel__intval(struct perf_evsel *evsel, > struct perf_sample *sample, const char *name); > > So: > > trap = perf_evsel__intval(evsel, sample, "trap"); > > And: > > tp_ip = perf_evsel__intval(evsel, sample, "pc"); > > Makes it a bit shorter and allows for optimizations in how to find that > field by name made at the evsel code. Thanks, missed perf_evsel__intval, will use this in the next iteration. > - Arnaldo > >> + >> +/* >> + * Get the HV and PR bits and accordingly, determine the cpumode >> + */ >> +u8 arch__get_cpumode(union perf_event *event, struct perf_evsel *evsel, >> + struct perf_sample *data) >> +{ >> + unsigned long hv, pr, msr; >> + u8 cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK; >> + >> + if (strcmp(KVMPPC_EXIT, evsel->name)) >> + goto ret; >> + >> + if (data->raw_data) >> + msr = raw_field_value(evsel->tp_format, "msr", data->raw_data); >> + else >> + goto ret; >> + >> + hv = msr & ((long unsigned)1 << (PPC_MAX - HV_BIT)); >> + pr = msr & ((long unsigned)1 << (PPC_MAX - PR_BIT)); >> + >> + if (!hv && pr) >> + cpumode = PERF_RECORD_MISC_GUEST_USER; >> + else >> + cpumode = PERF_RECORD_MISC_GUEST_KERNEL; >> +ret: >> + return cpumode; >> +} >> diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c >> index 072ae8a..e3fe5d0 100644 >> --- a/tools/perf/builtin-report.c >> +++ b/tools/perf/builtin-report.c >> @@ -141,6 +141,13 @@ out: >> return err; >> } >> >> +u8 __weak arch__get_cpumode(union perf_event *event, >> + __maybe_unused struct perf_evsel *evsel, >> + __maybe_unused struct perf_sample *sample) >> +{ >> + return event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK; >> +} >> + >> static int process_sample_event(struct perf_tool *tool, >> union perf_event *event, >> struct perf_sample *sample, >> @@ -155,6 +162,8 @@ static int process_sample_event(struct perf_tool *tool, >> }; >> int ret; >> >> + al.cpumode = arch__get_cpumode(event, evsel, sample); >> + > Why do it here? Other tools will need this as well, no? I.e. this should I may be wrong, but since, we are profiling a guest, I assume that other tools won't be needing this except "perf kvm report", right? > be done at perf_event__preprocess_sample(), that receives &al as a > return location. > > Humm, but evsel is not passed to perf_event__preprocess_sample, argh, > but yeah, at all perf_event__preprocess_sample() callsites the evsel is > already resolved, so we just need to add it to > perf_event__preprocess_sample() sig, now that we have a need for it. Yeah, we can add evsel to the perf_event__preprocess_sample() params. > I.e. this is like a userland fix for older kernels, right? Because > other tools will have to do this patching too? Yes, it should be a userland fix for older kernels (not older than 3.19, though because the tracepoint we are looking for is available from that version). >> if (perf_event__preprocess_sample(event, machine, &al, sample) < 0) { >> pr_debug("problem processing %d event, skipping it.\n", >> event->header.type); >> diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c >> index 6c6d044..693e37c 100644 >> --- a/tools/perf/util/event.c >> +++ b/tools/perf/util/event.c >> @@ -824,9 +824,14 @@ int perf_event__preprocess_sample(const union perf_event *event, >> struct addr_location *al, >> struct perf_sample *sample) >> { >> - u8 cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK; >> struct thread *thread = machine__findnew_thread(machine, sample->pid, >> sample->tid); >> + u8 cpumode; >> + >> + if (al->cpumode != PERF_RECORD_MISC_CPUMODE_UNKNOWN) >> + cpumode = al->cpumode; >> + else >> + cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK; > I.e. here, where we should try to avoid looking at anything in 'al'. Yes. > [SNIP] Thanks a lot for the review Arnaldo. Will try the suggestions in the next iteration.
diff --git a/tools/perf/arch/powerpc/Makefile b/tools/perf/arch/powerpc/Makefile index 6f7782b..992a0d5 100644 --- a/tools/perf/arch/powerpc/Makefile +++ b/tools/perf/arch/powerpc/Makefile @@ -4,3 +4,4 @@ LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/skip-callchain-idx.o endif LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/header.o +LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/parse-tp.o diff --git a/tools/perf/arch/powerpc/util/parse-tp.c b/tools/perf/arch/powerpc/util/parse-tp.c new file mode 100644 index 0000000..4c6e49c --- /dev/null +++ b/tools/perf/arch/powerpc/util/parse-tp.c @@ -0,0 +1,55 @@ +#include "../../util/evsel.h" +#include "../../util/trace-event.h" +#include "../../util/session.h" + +#define KVMPPC_EXIT "kvm_hv:kvm_guest_exit" +#define HV_DECREMENTER 2432 +#define HV_BIT 3 +#define PR_BIT 49 +#define PPC_MAX 63 + +/* + * Get the instruction pointer from the tracepoint data + */ +u64 arch__get_ip(struct perf_evsel *evsel, struct perf_sample *data) +{ + u64 tp_ip = data->ip; + int trap; + + if (!strcmp(KVMPPC_EXIT, evsel->name)) { + trap = raw_field_value(evsel->tp_format, "trap", data->raw_data); + + if (trap == HV_DECREMENTER) + tp_ip = raw_field_value(evsel->tp_format, "pc", + data->raw_data); + } + return tp_ip; +} + +/* + * Get the HV and PR bits and accordingly, determine the cpumode + */ +u8 arch__get_cpumode(union perf_event *event, struct perf_evsel *evsel, + struct perf_sample *data) +{ + unsigned long hv, pr, msr; + u8 cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK; + + if (strcmp(KVMPPC_EXIT, evsel->name)) + goto ret; + + if (data->raw_data) + msr = raw_field_value(evsel->tp_format, "msr", data->raw_data); + else + goto ret; + + hv = msr & ((long unsigned)1 << (PPC_MAX - HV_BIT)); + pr = msr & ((long unsigned)1 << (PPC_MAX - PR_BIT)); + + if (!hv && pr) + cpumode = PERF_RECORD_MISC_GUEST_USER; + else + cpumode = PERF_RECORD_MISC_GUEST_KERNEL; +ret: + return cpumode; +} diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c index 072ae8a..e3fe5d0 100644 --- a/tools/perf/builtin-report.c +++ b/tools/perf/builtin-report.c @@ -141,6 +141,13 @@ out: return err; } +u8 __weak arch__get_cpumode(union perf_event *event, + __maybe_unused struct perf_evsel *evsel, + __maybe_unused struct perf_sample *sample) +{ + return event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK; +} + static int process_sample_event(struct perf_tool *tool, union perf_event *event, struct perf_sample *sample, @@ -155,6 +162,8 @@ static int process_sample_event(struct perf_tool *tool, }; int ret; + al.cpumode = arch__get_cpumode(event, evsel, sample); + if (perf_event__preprocess_sample(event, machine, &al, sample) < 0) { pr_debug("problem processing %d event, skipping it.\n", event->header.type); diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c index 6c6d044..693e37c 100644 --- a/tools/perf/util/event.c +++ b/tools/perf/util/event.c @@ -824,9 +824,14 @@ int perf_event__preprocess_sample(const union perf_event *event, struct addr_location *al, struct perf_sample *sample) { - u8 cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK; struct thread *thread = machine__findnew_thread(machine, sample->pid, sample->tid); + u8 cpumode; + + if (al->cpumode != PERF_RECORD_MISC_CPUMODE_UNKNOWN) + cpumode = al->cpumode; + else + cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK; if (thread == NULL) return -1; diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c index 1e90c85..aa4dd49 100644 --- a/tools/perf/util/evsel.c +++ b/tools/perf/util/evsel.c @@ -1281,6 +1281,12 @@ static inline bool overflow(const void *endp, u16 max_size, const void *offset, #define OVERFLOW_CHECK_u64(offset) \ OVERFLOW_CHECK(offset, sizeof(u64), sizeof(u64)) +u64 __weak arch__get_ip(__maybe_unused struct perf_evsel *evsel, + __maybe_unused struct perf_sample *data) +{ + return data->ip; +} + int perf_evsel__parse_sample(struct perf_evsel *evsel, union perf_event *event, struct perf_sample *data) { @@ -1454,6 +1460,7 @@ int perf_evsel__parse_sample(struct perf_evsel *evsel, union perf_event *event, OVERFLOW_CHECK(array, data->raw_size, max_size); data->raw_data = (void *)array; array = (void *)array + data->raw_size; + data->ip = arch__get_ip(evsel, data); } if (type & PERF_SAMPLE_BRANCH_STACK) { diff --git a/tools/perf/util/evsel.h b/tools/perf/util/evsel.h index 3862274..5c94d64 100644 --- a/tools/perf/util/evsel.h +++ b/tools/perf/util/evsel.h @@ -355,4 +355,8 @@ for ((_evsel) = list_entry((_leader)->node.next, struct perf_evsel, node); \ (_evsel) && (_evsel)->leader == (_leader); \ (_evsel) = list_entry((_evsel)->node.next, struct perf_evsel, node)) +u64 arch__get_ip(struct perf_evsel *evsel, struct perf_sample *data); +u8 arch__get_cpumode(union perf_event *event, struct perf_evsel *evsel, + struct perf_sample *sample); + #endif /* __PERF_EVSEL_H */ diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c index 5f0e05a..49698cc 100644 --- a/tools/perf/util/session.c +++ b/tools/perf/util/session.c @@ -748,9 +748,10 @@ static void dump_sample(struct perf_evsel *evsel, union perf_event *event, static struct machine * perf_session__find_machine_for_cpumode(struct perf_session *session, union perf_event *event, - struct perf_sample *sample) + struct perf_sample *sample, + struct perf_evsel *evsel) { - const u8 cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK; + u8 cpumode = arch__get_cpumode(event, evsel, sample); struct machine *machine; if (perf_guest && @@ -856,7 +857,7 @@ int perf_session__deliver_event(struct perf_session *session, evsel = perf_evlist__id2evsel(session->evlist, sample->id); machine = perf_session__find_machine_for_cpumode(session, event, - sample); + sample, evsel); switch (event->header.type) { case PERF_RECORD_SAMPLE:
"perf kvm {record|report}" is used to record and report the performance profile of any workload on a guest. From the host, we can collect guest kernel statistics which is useful in finding out any contentions in guest kernel symbols for a certain workload. This feature is not available on powerpc because "perf" relies on the "cycles" event (a PMU event) to profile the guest. However, for powerpc, this can't be used from the host because the PMUs are controlled by the guest rather than the host. Due to this problem, we need a different approach to profile the workload in the guest. There exists a tracepoint "kvm_hv:kvm_guest_exit" in powerpc which is hit whenever any of the threads exit the guest context. The guest instruction pointer dumped along with this tracepoint data in the field "pc", can be used as guest instruction pointer while postprocessing the trace data to map this IP to symbol from guest.kallsyms. However, to have some kind of periodicity, we can't use all the kvm exits, rather exits which are bound to happen in certain intervals. HV_DECREMENTER Interrupt forces the threads to exit after an interval of 10 ms. This patch makes use of the "kvm_guest_exit" tracepoint and checks the exit reason for any kvm exit. If it is HV_DECREMENTER, then the instruction pointer dumped along with this tracepoint is retrieved and mapped with the guest kallsyms. This patch is a prototype asking for suggestions/comments as to whether the approach is right or is there any way better than this (like using a different event to profile for, etc) to profile the guest from the host. Thank You. Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com> --- tools/perf/arch/powerpc/Makefile | 1 + tools/perf/arch/powerpc/util/parse-tp.c | 55 +++++++++++++++++++++++++++++++++ tools/perf/builtin-report.c | 9 ++++++ tools/perf/util/event.c | 7 ++++- tools/perf/util/evsel.c | 7 +++++ tools/perf/util/evsel.h | 4 +++ tools/perf/util/session.c | 7 +++-- 7 files changed, 86 insertions(+), 4 deletions(-) create mode 100644 tools/perf/arch/powerpc/util/parse-tp.c