Message ID | 1264022727-21181-1-git-send-email-weil@mail.berlios.de |
---|---|
State | New |
Headers | show |
On 01/20/2010 03:25 PM, Stefan Weil wrote: > Some more command line options had entries for command line help, > but documentation for texi and derived formats (man, html, info) > was missing. > > For conditional options, the texi documentation was added > unconditionally. > > This seems reasonable because typically man pages are > shared, and html users expect to see one documentation > (not several nearly identical documents for the different > systems). > > Signed-off-by: Stefan Weil<weil@mail.berlios.de> > Applied all. Thanks. Regards, Anthony Liguori > --- > qemu-options.hx | 35 +++++++++++++++++++++++++++++++++++ > 1 files changed, 35 insertions(+), 0 deletions(-) > > diff --git a/qemu-options.hx b/qemu-options.hx > index f5bd671..559f9ac 100644 > --- a/qemu-options.hx > +++ b/qemu-options.hx > @@ -566,6 +566,8 @@ DEF("g", 1, QEMU_OPTION_g , > "-g WxH[xDEPTH] Set the initial graphical resolution and depth\n") > #endif > STEXI > +@item -g @var{width}x@var{height}[x@var{depth}] > +Set the initial graphical resolution and depth (PPC, SPARC only). > ETEXI > > DEF("vnc", HAS_ARG, QEMU_OPTION_vnc , > @@ -1599,6 +1601,10 @@ non graphical mode. > ETEXI > DEF("qmp", HAS_ARG, QEMU_OPTION_qmp, \ > "-qmp dev like -monitor but opens in 'control' mode\n") > +STEXI > +@item -qmp @var{dev} > +Like -monitor but opens in 'control' mode. > +ETEXI > > DEF("mon", HAS_ARG, QEMU_OPTION_mon, \ > "-mon chardev=[name][,mode=readline|control][,default]\n") > @@ -1715,6 +1721,16 @@ DEF("xen-attach", 0, QEMU_OPTION_xen_attach, > "-xen-attach attach to existing xen domain\n" > " xend will use this when starting qemu\n") > #endif > +STEXI > +@item -xen-domid @var{id} > +Specify xen guest domain @var{id} (XEN only). > +@item -xen-create > +Create domain using xen hypercalls, bypassing xend. > +Warning: should not be used when xend is in use (XEN only). > +@item -xen-attach > +Attach to existing xen domain. > +xend will use this when starting qemu (XEN only). > +ETEXI > > DEF("no-reboot", 0, QEMU_OPTION_no_reboot, \ > "-no-reboot exit instead of rebooting\n") > @@ -1902,16 +1918,22 @@ ETEXI > DEF("show-cursor", 0, QEMU_OPTION_show_cursor, \ > "-show-cursor show cursor\n") > STEXI > +@item -show-cursor > +Show cursor. > ETEXI > > DEF("tb-size", HAS_ARG, QEMU_OPTION_tb_size, \ > "-tb-size n set TB size\n") > STEXI > +@item -tb-size @var{n} > +Set TB size. > ETEXI > > DEF("incoming", HAS_ARG, QEMU_OPTION_incoming, \ > "-incoming p prepare for incoming migration, listen on port p\n") > STEXI > +@item -incoming @var{port} > +Prepare for incoming migration, listen on @var{port}. > ETEXI > > DEF("nodefaults", 0, QEMU_OPTION_nodefaults, \ > @@ -1946,14 +1968,27 @@ DEF("prom-env", HAS_ARG, QEMU_OPTION_prom_env, > "-prom-env variable=value\n" > " set OpenBIOS nvram variables\n") > #endif > +STEXI > +@item -prom-env @var{variable}=@var{value} > +Set OpenBIOS nvram @var{variable} to given @var{value} (PPC, SPARC only). > +ETEXI > #if defined(TARGET_ARM) || defined(TARGET_M68K) > DEF("semihosting", 0, QEMU_OPTION_semihosting, > "-semihosting semihosting mode\n") > #endif > +STEXI > +@item -semihosting > +Semihosting mode (ARM, M68K only). > +ETEXI > #if defined(TARGET_ARM) > DEF("old-param", 0, QEMU_OPTION_old_param, > "-old-param old param mode\n") > #endif > +STEXI > +@item -old-param > +Old param mode (ARM only). > +ETEXI > + > DEF("readconfig", HAS_ARG, QEMU_OPTION_readconfig, > "-readconfig<file>\n") > STEXI >
diff --git a/qemu-options.hx b/qemu-options.hx index f5bd671..559f9ac 100644 --- a/qemu-options.hx +++ b/qemu-options.hx @@ -566,6 +566,8 @@ DEF("g", 1, QEMU_OPTION_g , "-g WxH[xDEPTH] Set the initial graphical resolution and depth\n") #endif STEXI +@item -g @var{width}x@var{height}[x@var{depth}] +Set the initial graphical resolution and depth (PPC, SPARC only). ETEXI DEF("vnc", HAS_ARG, QEMU_OPTION_vnc , @@ -1599,6 +1601,10 @@ non graphical mode. ETEXI DEF("qmp", HAS_ARG, QEMU_OPTION_qmp, \ "-qmp dev like -monitor but opens in 'control' mode\n") +STEXI +@item -qmp @var{dev} +Like -monitor but opens in 'control' mode. +ETEXI DEF("mon", HAS_ARG, QEMU_OPTION_mon, \ "-mon chardev=[name][,mode=readline|control][,default]\n") @@ -1715,6 +1721,16 @@ DEF("xen-attach", 0, QEMU_OPTION_xen_attach, "-xen-attach attach to existing xen domain\n" " xend will use this when starting qemu\n") #endif +STEXI +@item -xen-domid @var{id} +Specify xen guest domain @var{id} (XEN only). +@item -xen-create +Create domain using xen hypercalls, bypassing xend. +Warning: should not be used when xend is in use (XEN only). +@item -xen-attach +Attach to existing xen domain. +xend will use this when starting qemu (XEN only). +ETEXI DEF("no-reboot", 0, QEMU_OPTION_no_reboot, \ "-no-reboot exit instead of rebooting\n") @@ -1902,16 +1918,22 @@ ETEXI DEF("show-cursor", 0, QEMU_OPTION_show_cursor, \ "-show-cursor show cursor\n") STEXI +@item -show-cursor +Show cursor. ETEXI DEF("tb-size", HAS_ARG, QEMU_OPTION_tb_size, \ "-tb-size n set TB size\n") STEXI +@item -tb-size @var{n} +Set TB size. ETEXI DEF("incoming", HAS_ARG, QEMU_OPTION_incoming, \ "-incoming p prepare for incoming migration, listen on port p\n") STEXI +@item -incoming @var{port} +Prepare for incoming migration, listen on @var{port}. ETEXI DEF("nodefaults", 0, QEMU_OPTION_nodefaults, \ @@ -1946,14 +1968,27 @@ DEF("prom-env", HAS_ARG, QEMU_OPTION_prom_env, "-prom-env variable=value\n" " set OpenBIOS nvram variables\n") #endif +STEXI +@item -prom-env @var{variable}=@var{value} +Set OpenBIOS nvram @var{variable} to given @var{value} (PPC, SPARC only). +ETEXI #if defined(TARGET_ARM) || defined(TARGET_M68K) DEF("semihosting", 0, QEMU_OPTION_semihosting, "-semihosting semihosting mode\n") #endif +STEXI +@item -semihosting +Semihosting mode (ARM, M68K only). +ETEXI #if defined(TARGET_ARM) DEF("old-param", 0, QEMU_OPTION_old_param, "-old-param old param mode\n") #endif +STEXI +@item -old-param +Old param mode (ARM only). +ETEXI + DEF("readconfig", HAS_ARG, QEMU_OPTION_readconfig, "-readconfig <file>\n") STEXI
Some more command line options had entries for command line help, but documentation for texi and derived formats (man, html, info) was missing. For conditional options, the texi documentation was added unconditionally. This seems reasonable because typically man pages are shared, and html users expect to see one documentation (not several nearly identical documents for the different systems). Signed-off-by: Stefan Weil <weil@mail.berlios.de> --- qemu-options.hx | 35 +++++++++++++++++++++++++++++++++++ 1 files changed, 35 insertions(+), 0 deletions(-)